URO Fuel Tank Vent Valve - N52 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:9126164

Part#: 13907618643

In Stock

$ 64.38 USD

Add to Wish List

Qty

$ 64.38 USD

Add to Wish List

A failed evap purge solenoid in your vehicle's evaporative emissions system will often have no noticeable symptoms beyond a check engine light, but it does cause your BMW to operate inefficiently and produce higher emissions. Solve your issues with this direct replacement from URO.

Show More Show Less

Febi Fuel Filter - E46, Z3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:382429

Part#: 13327512019

Special Order: No Guaranteed ETA

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

Protect your fuel system

Gas Cap - BMW E39 528i 540i 1997-1998

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2791

Part#: 16111184717

Ships in 3 Business Days

Sale - Save 6% $ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 63.99 USD

Add to Wish List

Qty

Sale - Save 6%

$ 67.99

This product was last offered at the strikethrough price on
06-15-2026

$ 63.99 USD

Add to Wish List

This gas cap fits BMW E39 528i 540i 1997 1998. A faulty gas cap can often be the cause a fault code and trigger a "check engine" light.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1997-1998 E39 BMW 528i 540i

Show More Show Less

Rein Fuel Hose Assembly - BMW E60/61 5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49404666

Part#: 13537537964

Ships in 3 Business Days

$ 64.99

This product was last offered at the strikethrough price on
04-28-2026

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

Replace damaged or cracked fuel hose assembly with this option from Rein

Fuel Tank Breather Line - F01, F02, F07, F10, F12, F13

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:43787

Part#: 13907567396

In Stock

Sale - Save 6% $ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 63.25 USD

Add to Wish List

Qty

Sale - Save 6%

$ 66.99

This product was last offered at the strikethrough price on
06-15-2026

$ 63.25 USD

Add to Wish List

Genuine BMW Fuel Tank Breather Line -
This item fits the following BMW Chassis:
F01,F02,F10,F12,F13

Fits BMW Engines including:
N63

GB Remanufactured Fuel Injector - Priced Each - M52 M54 - Includes Co...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641756

Part#: 13537546244REKT

Back Ordered

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Decreased performance, lower fuel economy and smoke coming from the exhaust could point to failing fuel injectors. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Genuine BMW Fuel Hose - 1 Meter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41534

Part#: 13311272750

In Stock

3% off MSRP $ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

3% off MSRP

$ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 6X11mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E30,E34,E36,E38,E46

Low Pressure Fuel Pump - BMW E10 2002

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25109084

Part#: 13311265192

Special Order: No Guaranteed ETA

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Replace your failed fuel pump with this OEM Pierburg fuel pump to get your BMW back on the road!

OEM Mann Fuel Filter - BMW E53 X5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340600

Part#: 16126754016

Ships in 8 Business Days

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

This is an OEM Mann replacement fuel filter. BMW recommends changing the fuel filter every 20,000 miles to keep your fuel injection system clean, a must for every tune-up.

Genuine BMW Fuel Vent Hose

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:19435

Part#: 13311722565

In Stock

Sale - Save 6% $ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.91 USD

Add to Wish List

Qty

Sale - Save 6%

$ 66.99

This product was last offered at the strikethrough price on
06-25-2026

$ 62.91 USD

Add to Wish List

Genuine BMW Fuel Hose - 561mm-920mm

This item fits the following BMW Chassis:
E30 M3,E34 M5,E30,E34

Fits BMW Engines including:
M10,M20,M30,M50,M70,S14,S38

Show More Show Less

Fuel Line - E46

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:44830

Part#: 16126752180

Ships in 5 Business Days

3% off MSRP $ 63.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.99 USD

Add to Wish List

Qty

3% off MSRP

$ 63.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.99 USD

Add to Wish List

Genuine BMW Rear Fuel Feed Line -
This item fits the following BMW Chassis:
E46

Fits BMW Engines including:
M54

Genuine BMW Fuel Tank Breather Line - 13907837661 - E46 M3,E85 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:43836

Part#: 13907837661

Ships in 1-2 days

2% off MSRP $ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.99 USD

Add to Wish List

Qty

2% off MSRP

$ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.99 USD

Add to Wish List

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Fuel Tank Breather Line
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Show More Show Less

Fuel Line - E46

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:44832

Part#: 16126752186

Ships in 1-2 days

2% off MSRP $ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.99 USD

Add to Wish List

Qty

2% off MSRP

$ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.99 USD

Add to Wish List

Genuine BMW Fuel Return Line -
This item fits the following BMW Chassis:
E46

Fits BMW Engines including:
M54

Genuine BMW Fuel Filter Cover - E46 325xi 330xi

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25120

Part#: 13327500083

Ships in 1-2 days

$ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Genuine BMW Fuel Filter Cover -
This item fits the following BMW Chassis:
E46

Fits BMW Engines including:
M54

GB Remanufactured Fuel Injector - Priced Each - E30 325E E28 528E - I...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641759

Part#: 13641466261KT

Back Ordered

$ 63.99

This product was last offered at the strikethrough price on
05-08-2026

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Decreased performance, lower fuel economy and smoke coming from the exhaust could point to failing fuel injectors. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Genuine BMW Rear Fuel Feed Line

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7373

Part#: 16121182859

In Stock

3% off MSRP $ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Qty

3% off MSRP

$ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Genuine BMW Rear Fuel Feed Line
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M42,M44,M50,M52,S50,S52

Genuine BMW Stone Guard

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:45216

Part#: 16132227852

Ships in 3 Business Days

3% off MSRP $ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Qty

3% off MSRP

$ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Genuine BMW Stone-Chip Guard
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M42,M44,M50,M52,S50,S52

Genuine BMW Rubber Mounting - 61211243530

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:141302

Part#: 61211243530

Ships in 3 Business Days

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Genuine BMW RUBBER MOUNTING

Bremmen High Pressure Fuel Pump Sprocket - BMW N57 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50381429

Part#: 13527800025

In Stock

Sale - Save 21% $ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 60.38 USD

Add to Wish List

Qty

Sale - Save 21%

$ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 60.38 USD

Add to Wish List

The N57 High-Pressure Fuel Pump Sprocket is a crucial component in BMW vehicles equipped with the N57 diesel engine. It drives the high-pressure fuel pump, ensuring precise fuel delivery for efficient combustion and optimal engine performance. This sprocket is also important in linking the timing chain system from the crankshaft to the fuel pump and then to the camshafts.

Show More Show Less

Port Injector Plugs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

F3X/F2X - B58 Silent EKP PNP Cooler Kit - 40mm Noctua Fan

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A Must For Cars With Upgraded LPFPs

T#:26471614

Part#: AT232F22BLA40MB5

Ships in 1 Business Day

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

E90 / E92 / E93 Silent Fan EKP PNP Cooler Kit - 40mm Noctua Fan ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A Must For Cars With Upgraded LPFPs

T#:26404814

Part#: SILENT-E90-EKP

Ships in 1 Business Day

Starting at $ 59.99 USD

Add to Wish List

Starting at $ 59.99 USD

Add to Wish List

The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E9X BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8 (2007+ E9X), which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable ASA, ABS, or PETG. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With a Genuine Noctua 60mm or 40mm Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a silent Noctua fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

E60 / E61 EKPM2 EKPM3 PNP Cooler Kit - (5 Series)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A Must For Cars With Upgraded LPFPs

T#:26305056

Part#: E60-EKP-PNPC

Ships in 1 Business Day

Starting at $ 59.99 USD

Add to Wish List

Starting at $ 59.99 USD

Add to Wish List

The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E60 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. There are two versions of the kit, one with a relay and one without a relay. The relay kit is for those who would prefer to not put an additional load on their 12v outlet circuit due to using that circuit for something with a high load already. The non-relay kit will work perfectly for any normal use of the 12v outlet circuit and only adds up to 0.30 amps onto that circuit, which is very minimal. For all M5s, you will need to use an EKPM2 kit as the EKP module is physically the same size as an EKPM2. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With 5015 Fan and Fused Relay 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 2x 2 Amp Standard Blade Fuses Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

Race German Fuel Injector Rebuild Kit - Bosch Style M62

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6827870

Part#: RGBSCHM62

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M62 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Includes fuel injector removal tool.

Show More Show Less

F3X/F2X - N20 Silent EKP PNP Cooler Kit - 40mm Noctua Fan

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A Must For Cars With Upgraded LPFPs

T#:26471605

Part#: AT234F22BLA40MN2

Ships in 1 Business Day

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

MINI R52 R53 JCW Fuel Injector - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2104261

Part#: 13537574132

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

E82 Silent Fan EKP PNP Cooler Kit - 40mm Noctua Fan

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A Must For Cars With Upgraded LPFPs

T#:26471523

Part#: SILENT-E82-EKP

Ships in 1 Business Day

Starting at $ 59.99 USD

Add to Wish List

Starting at $ 59.99 USD

Add to Wish List

The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E82 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8 (2007+ E82), which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With a Genuine 60mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a silent Noctua fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

F8X - S55 Silent EKP PNP Cooler Kit - 40mm Noctua Fan

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A Must For Cars With Upgraded LPFPs

T#:26471619

Part#: AT233F22BLA40MS5

Ships in 1 Business Day

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F80, F82, F83, and F87 (Comp) BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a Single Noctua 40mm Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

F3X/F2X - N55 Silent EKP PNP Cooler Kit - 40mm Noctua Fan

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A Must For Cars With Upgraded LPFPs

T#:26471609

Part#: AT231F22BLA40MN5

Ships in 1 Business Day

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

E89 Silent Fan EKP PNP Cooler Kit - 40mm Noctua Fan

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A Must For Cars With Upgraded LPFPs

T#:26471534

Part#: SILENT-E89-EKP

Ships in 1 Business Day

Starting at $ 59.99 USD

Add to Wish List

Starting at $ 59.99 USD

Add to Wish List

The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E82 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8, which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket in order to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable ASA, ABS or PETG, depending on the color choice. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With a Genuine 60mm or 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a silent Noctua fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

Genuine BMW Fuel Filter - F10 535d 535d xDrive, F15 X5 xDrive35d, F02...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:10974882

Part#: 13327822499

In Stock

16% off MSRP $ 71.35

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.98 USD

Add to Wish List

Qty

16% off MSRP

$ 71.35

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.98 USD

Add to Wish List

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating diesel tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Genuine BMW Gas Cap - Non Locking - E36, E31, E34, E38

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367876

Part#: 16111184718

In Stock

15% off MSRP $ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.51 USD

Add to Wish List

Qty

15% off MSRP

$ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.51 USD

Add to Wish List

Genuine BMW Gas Cap for E36, E31, E34, E38

Upgrade your BMW's gas cap with this genuine BMW Gas Cap designed for E36, E31, E34, and E38 models. Crafted with precision to ensure a perfect fit and superior performance, this gas cap is an essential accessory for maintaining your vehicle's fuel system. With its OEM quality, you can trust it to provide a secure seal and prevent fuel leaks. Experience peace of mind and optimize your BMW's performance with this authentic gas cap.

Genuine BMW product ensures quality and compatibility
Designed for E36, E31, E34, and E38 models
Precision-crafted for a perfect fit
Prevents fuel leaks and ensures a secure seal
Enhances the performance of your BMW's fuel system

Show More Show Less

Fuel Line - E24, E28

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:44584

Part#: 16121178468

Ships in 8 Business Days

2% off MSRP $ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Qty

2% off MSRP

$ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Genuine BMW INLET PIPE
Fits BMW Engines including:
M20,M30,S38

OEM Hengst Fuel Filter - E31 E32 E34 E36

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:596662

Part#: 13321720101

Ships on Aug 4, 2026

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

This is an OEM Hengst fuel filter that removes dirt and other particle contaminants from your fuel. A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel-related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Bracket Fuel Strainer - E90

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:194703

Part#: 13328513540

Ships in 9 Business Days

3% off MSRP $ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Qty

3% off MSRP

$ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Genuine BMW Bracket Fuel Strainer -
This item fits the following BMW Chassis:
E90

Fits BMW Engines including:
M57

Genuine BMW Flange - E70 X5,E90

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:42277

Part#: 13537792722

Ships in 1-2 days

3% off MSRP $ 61.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Qty

3% off MSRP

$ 61.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Fuel injector bracket / flange Genuine BMW Flange - This item fits the following BMW Chassis: E70 X5,E90 Fits BMW Engines including: M57

High Pressure Fuel Injector - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17605211

Part#: 13537591623

Special Order: No Guaranteed ETA

Sale - Save 16% $ 68.99

This product was last offered at the strikethrough price on
05-03-2026

$ 58.08 USD

Add to Wish List

Qty

Sale - Save 16%

$ 68.99

This product was last offered at the strikethrough price on
05-03-2026

$ 58.08 USD

Add to Wish List

Genuine BMW Fuel tank seal - E24 M6

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:43900

Part#: 16111119235

Ships in 1-2 days

3% off MSRP $ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

Qty

3% off MSRP

$ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

Genuine BMW RUBBER SEAL
Fits BMW Engines including:
M30,S38

Bosch High Pressure Fuel Pressure Sensor

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:591891

Part#: 13537620946

In Stock

$ 101.99

This product was last offered at the strikethrough price on
03-17-2026

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

A vital component for high pressure fuel system function

Fuel Line - E36

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7374

Part#: 16121182864

Ships in 9 Business Days

2% off MSRP $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Qty

2% off MSRP

$ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Genuine BMW Front Fuel Feed Line
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M42,M44,M50,S50

Genuine BMW Fuel Filter vacuum line - E38 740i 740iL E53 X5 E52 Z8 E3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13109

Part#: 13321437692

Ships in 3 Business Days

3% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Qty

3% off MSRP

$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Genuine BMW Vacuum Pipe -
This item fits the following BMW Chassis:
E38,E39,E53 X5

Fits BMW Engines including:
M62

OEM Bosch Low Fuel Pressure Sensor - N54 N55 N63 S55 S63 S65 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:399809

Part#: 13537622231

In Stock

$ 56.95 USD

Add to Wish List

Qty

$ 56.95 USD

Add to Wish List

This sensor monitors the pressure of the fuel coming from the high pressure fuel pump, looking for low pressure, to determine if your HPFP is functioning correctly.

GB Remanufactured Fuel Injector - Priced Each - E36 M42- Includes Cor...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641767

Part#: 13641739242KT

Back Ordered

$ 56.99

This product was last offered at the strikethrough price on
05-08-2026

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Decreased performance, lower fuel economy and smoke coming from the exhaust could point to failing fuel injectors. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

OEM Hengst Fuel Filter - E53 X5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:392840

Part#: 16126754016

Ships in 3 Business Days

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

A must for any tune-up and the source for a lot of engine issues, including: hard starting, hesitations, lean mixture faults, misfire faults, and stallings. The fuel filter is easy to change and it's recommended to replace it every 30-40,000 miles. This is an OEM Hengst filter.

Show More Show Less

Hitachi Fuel Pump Camshaft Follower - BMW N20 N55 S55 N63 S63 B48/46 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:589968

Part#: 11327601233

Back Ordered

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

A faulty camshaft follower can damage the engine and cause incorrect valve timing.

High Pressure Fuel Injector - Priced Each A2C59517083

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:591148

Part#: 13537528176

Special Order: No Guaranteed ETA

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Genuine BMW Fuel Hose

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:19442

Part#: 16121176440

Ships in 3 Business Days

2% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Qty

2% off MSRP

$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 12X18

This item fits the following BMW Chassis:
E30

Fits BMW Engines including:
M10,M20,M30,M60,M62,M70,M73,S38,S70

Show More Show Less

Fuel Hose - E36

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:44931

Part#: 16127175977

Ships in 1-2 days

2% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Qty

2% off MSRP

$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Genuine BMW Fuel Hose - E6X11mm/Fpm
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M42,M44,M50,M52,S50,S52

Bosch Fuel Level Sensor - Left - E60, E61, E63, E64

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:591942

Part#: 16146765825

Special Order: No Guaranteed ETA

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Fuel gauge reading incorrectly?

Fuel Hose - E46

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:44328

Part#: 16117176011

Ships in 1-2 days

2% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Qty

2% off MSRP

$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 40X47X170
This item fits the following BMW Chassis:
E46 M3,E46

Fits BMW Engines including:
M52,M54,S54

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts

Sub-Categories

Genuine BMW Gas Cap for E36, E31, E34, E38

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results