![Spool FX-200 Upgraded High Pressure Pump + Fuel Line [B58]](https://assets.turnermotorsport.com/product_library_tms/1849731_x300.webp)
Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The Precision Raceworks G8x/G2x Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection!
Since direct injection came out for BMW, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential.
Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check.
With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on!
Features & Benefits
Billet Aluminum top hat with 3 high-flow fuel ports
Dedicated fuel pump(s) for port injection system
Optimal pump location resistant to fuel slosh under acceleration
Fully adjustable 1:1 scaling billet fuel pressure regulator
10-micron USA made Microglass fuel filter (Ideal for E85)
Smooth bore high flow PTFE fuel feed & return lines (AN6)
All billet connections for both fuel line fittings and top-hat
Plug and play connectors inside and outside* the top hat
Configurable pump activation harness (see instructions for more details)
Increased injector flow (when using 1:1 regulator feature vs static)
Compatible with all stock or upgraded primary fuel pumps
Easily expandable and upgrade-able for more fuel
All components and parts feature 100% Ethanol Compatibility
The AFS.745 dedicated auxiliary fuel system comes with all** necessary components to provide dedicated fuel system for port injection. Featuring One Walbro 450 (F900074) & One Walbro 535 (F9000295) fuel pumps with a combined flow of 745LPH @ 3bar.
Pump flow 43.5 psi-a : 745 lph
Recommended base pressure: 43.5 psi-g
Maximum Fuel Pressure: 110 psi-g
Number of Fuel Output Ports: 2
Number of Fuel Return Ports: 1
Pump 1: Walbro 535 (F90000295)
Pump 2: Walbro 450 (F90000274)
Available (unused) Electrical Connections: 2*
Total System Weight:14 lbs (including fuel lines and wiring harness)
*At time of install some wiring in the car may need to be cut and spliced to connectors included in this kit
**Male AN8-ORB to Female AN6-ORB adapter may be required for compatibility with some fuel rails (not included in kit)
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This Genuine MINI metal pump located in the engine bay boost pressure for the direct inject system. Includes sealing o ring.
Connects from fuel feed to the fuel rail pressure line.
Includes:
This product was last offered at the strikethrough price on
06-19-2026
N54 HPFP failure is common with BMWs that use this powerplant. Our Packaged by Turner N54 High Pressure Fuel Pump Replacement Kit includes everything you need to replace your N54 HPFP.
Kit includes:
The Precision Raceworks G8x/G2x Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection!
Since direct injection came out for BMW, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential.
Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check.
With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on!
Features & Benefits
Billet Aluminum top hat with 3 high-flow fuel ports
Dedicated fuel pump(s) for port injection system
Optimal pump location resistant to fuel slosh under acceleration
Fully adjustable 1:1 scaling billet fuel pressure regulator
10-micron USA made Microglass fuel filter (Ideal for E85)
Smooth bore high flow PTFE fuel feed & return lines (AN6)
All billet connections for both fuel line fittings and top-hat
Plug and play connectors inside and outside* the top hat
Configurable pump activation harness (see instructions for more details)
Increased injector flow (when using 1:1 regulator feature vs static)
Compatible with all stock or upgraded primary fuel pumps
Easily expandable and upgrade-able for more fuel
All components and parts feature 100% Ethanol Compatibility
The AFS.640 dedicated auxiliary fuel system comes with all** necessary components to provide dedicated fuel system for port injection. Featuring Two Walbro 450’s (F9000274) fuel pumps with a combined flow of 640LPH at 3 bar.
Pump flow 43.5 psi-a : 640 lph
Recommended base pressure: 43.5 psi-g
Maximum Fuel Pressure: 110 psi-g
Number of Fuel Output Ports: 2
Number of Fuel Return Ports: 1
Pump 1: Walbro 450 (F90000274)
Pump 2: Walbro 450 (F90000274)
Available (unused) Electrical Connections: 2*
Total System Weight: 14 lbs (including fuel lines and wiring harness)
*At time of install some wiring in the car may need to be cut and spliced to connectors included in this kit
**Male AN8-ORB to Female AN6-ORB adapter may be required for compatibility with some fuel rails (not included in kit)
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
07-06-2026
This product was last offered at the strikethrough price on
07-06-2026
Upgrade your Mini's performance with this high-quality metal pump designed to enhance boost pressure for the direct injection system. The pump, conveniently located in the engine bay, comes equipped with a sealing O-ring for seamless installation.
Benefits:
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
The Precision Raceworks G8x/G2x Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection!
Since direct injection came out for BMW, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential.
Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check.
With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on!
Features & Benefits
Billet Aluminum top hat with 3 high-flow fuel ports
Dedicated fuel pump(s) for port injection system
Optimal pump location resistant to fuel slosh under acceleration
Fully adjustable 1:1 scaling billet fuel pressure regulator
10-micron USA made Microglass fuel filter (Ideal for E85)
Smooth bore high flow PTFE fuel feed & return lines (AN6)
All billet connections for both fuel line fittings and top-hat
Plug and play connectors inside and outside* the top hat
Configurable pump activation harness (see instructions for more details)
Increased injector flow (when using 1:1 regulator feature vs static)
Compatible with all stock or upgraded primary fuel pumps
Easily expandable and upgrade-able for more fuel
All components and parts feature 100% Ethanol Compatibility
The AFS.460 dedicated auxiliary fuel system comes with all** necessary components to provide dedicated fuel system for port injection. Featuring a single Walbro 535 (F9000295) fuel pump which flows 460LPH at 3 bar.
Pump flow 43.5 psi-a : 460 lph
Recommended base pressure: 43.5 psi-g
Maximum Fuel Pressure: 110 psi-g
Number of Fuel Output Ports: 2
Number of Fuel Return Ports: 1
Pump 1: Walbro 535 (F90000295)
Pump 2: N/A
Available (unused) Electrical Connections: 4*
Total System Weight: 11 lbs (including fuel lines and wiring harness)
*At time of install some wiring in the car may need to be cut and spliced to connectors included in this kit
**Male AN8-ORB to Female AN6-ORB adapter may be required for compatibility with some fuel rails (not included in kit)
The Precision Raceworks Stand-Alone Auxiliary Fuel System is the highest performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection!
Since direct injection came out, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically, this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential.
Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure, low volume, resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep the target AFR in check.
With this stand-alone low-pressure fuel system dedicated to your port fueling, that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures which are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), and put less demand on the car’s DI system to correct for fluctuations in pressure. Even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate. The list of benefits goes on and on!