Find Parts That Fit Your Vehicle

BMW Exhaust Parts, Mufflers & Catalytic Converters

Performance exhaust options from the best BMW aftermarket producers and the most reliable replacement maintenance parts are all at Turner Motorsport. Over time, factory exhaust on the cleanest examples of BMW heritage shows their age. Our factory replacement exhausts are just what you need to keep your favorite car in showroom condition or finish off your restoration. If you are looking for a bump in sound and power, you can also find our performance options like Headers, Downpipes, and Mufflers from Corsa, DINAN, and others on this page.

Sub-Categories

Sort By:

Active Autowerke - Corporate Logo
T#:397486
Part#: 11-045
Ships in 3 Business Days
$ 3,563.00 USD
Free Shipping
$ 3,563.00 USD
Free Shipping
The Active Autowerke F8X rear exhaust was carefully engineered to eliminate the unflattering sound of the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance. Every effort was made in addressing the not so appeasing sound of the stock OEM exhaust, but in designing an exhaust worthy for an "M" car. We believe our rear exhaust combined with our mid-pipe offers the deepest sound and best performance of any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory!
Show More Show Less
Akrapovic - Corporate Logo
T#:3018041
Part#: BM/T/21H-C
In Stock at Vendor
$ 9,962.99 USD
$ 9,962.99 USD
Includes rounded Classic Carbon Fiber Exhaust Tips The exhaust tone is most noticeable as you move through the gears and accelerate, and this can be further controlled through the addition of the optional Akrapovic Sound Kit to provide increased aural pleasure. Akrapovic has achieved power gains of 10.9 HP at 6,000 rpm and torque increases of 10.3 lb/ft Torque at 6,000 rpm when tested on the Akrapovic dyno against a G80 M3 with a stock M Sport exhaust system for comparison.
Show More Show Less
Akrapovic - Corporate Logo
T#:3018043
Part#: P-HF1384
Ships in 3 Business Days
$ 605.99 USD
Free Shipping
$ 605.99 USD
Free Shipping

Akrapovic Sound Kit for BMW G80 G82 M3 M4 offers BMW owners the ability to control the sound of their Akrapovic exhaust system directly from the cockpit. Utilizing advanced Akrapovic technology, this kit allows drivers to switch between a quieter mode and a sportier exhaust sound. The system includes a receiver, already integrated into the Evolution exhaust system, which operates the actuators to open or close the exhaust valves. Drivers can manage the sound with the Sound Remote Controller or the latest smartphone app, compatible with both iOS and Android devices.

  • Enhanced Control: Allows for easy switching between quiet and sporty exhaust modes.
  • Advanced Technology: Features Akrapovic technology for precise sound management.
  • Convenient Operation: Control the exhaust valves using the Sound Remote Controller or a smartphone app.
  • Compatibility: Designed specifically for BMW G80 and G82 M3 and M4 models.
  • Easy Integration: Receiver included in the Evolution system for straightforward installation.
Show More Show Less

Active Autowerke - Corporate Logo
T#:2393398
Part#: 11-051B
Ships in 3 Business Days
$ 3,820.00 USD
Free Shipping
$ 3,820.00 USD
Free Shipping
Active Autowerke is proud to announce the release of their Signature M2 Competition Exhaust System. This system is the result of countless hours of R&D to obtain the perfect combination of performance and sound. Constructed of 100% 304 TIG welded stainless steel, they have created a modular exhaust system that will provide enough flow to support power levels way above the stock M2 Competition. When installed as a complete unit, the exhaust diameter of our system never shrinks below 3.5” The rear section splits from a single 3.5” pipe in to dual 3.5” pipes; one of which is valved and leads straight to the exhaust tips with the other leading to a straight through muffler that reduces noise levels when the valve is closed. The Y-pipe is hand built to maintain maximum exhaust velocity throughout the entire system. With the reduced back pressure and large single-pipe design you can expect exhaust velocity to remain as high as possible throughout the entire system. The design is also capable of handling much higher power levels than stock. It’s over engineered to have no issues handling the increased exhaust volume from extensive modifications including turbo upgrades. The stock M2 Competition sounds great, but there’s always room for improvement! They configured 7 different muffler and resonator setups before settling on the final product. With the valve closed the system is slightly louder than stock but with a great note. With the valve open it’s significantly louder but without the metallic, hollow sound of a full straight pipe exhaust. MADE IN THE USA FEATURES: Mandrel bent 304-stainless construction Completely TIG Welded (No MIG Welding at all) Flow efficient Y-Pipe design Perfect fitment with adjustable 90mm double walled tips True 3.5” turbo back design Uses OEM valve motor Designed to be used at stock power levels along with highly modified engines No permanent modifications required Manufactured in house in Miami, FL.
Show More Show Less

Akrapovic - Corporate Logo
T#:340330
Part#: TMS4781
In Stock at Vendor
Starting at $ 5,403.80 USD
Free Shipping
Starting at $ 5,403.80 USD
Free Shipping
According to BMW the 1 Series M Coupe is a "predator on the prowl", why not give it some GROWL with the Akrapovic slip-on exhaust system.

This slip-on muffler is an "axle back" system that is mounted on the MotoGP 1M Coupe Safety Car and now is available for street going 1M Coupes. The Akrapovic Slip-On Titanium exhaust system for the BMW 1M Coupe is designed for drivers who demand more power and less weight. In addition to a weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the 1M Coupe become music to ones ears. An optional wireless "dualmode" exhaust flap control allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, when the exhaust flap is opened the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Not for sale outside the US or Canada.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
Show More Show Less
Akrapovic - Corporate Logo
T#:558669
Part#: S-BM/T/2HKT
Ships in 3 Business Days
$ 11,798.99

This product was last offered at the strikethrough price on
10-01-2026

$ 11,319.99 USD
$ 11,319.99 USD

The Akrapovic Cat-back Titanium exhaust system for the BMW F90 M5 is designed for drivers who demand more power and less weight. In addition to weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the M5 become music to ones ears. An optional wireless "dualmode" exhaust flap control allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, when the exhaust flap is opened the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Power gains come in at +11.3hp (at 5700 RPM) and 21.3Nm (at 2300 RPM) with just the exhaust alone, and a total weight savings of 20.8 lbs! That is a 32.6% overall reduced difference in weight from stock.

Not for sale outside the US or Canada.

This item fits the following BMWs:
2018+ F90 BMW  M5

Show More Show Less

Active Autowerke - Corporate Logo
T#:397446
Part#: 11-015
Ships in 3 Business Days
$ 1,519.99 USD
$ 1,519.99 USD

True performance, durability, and attractive weight advantages with innovative features places the Active Autowerke E9X BMW M3 exhaust in a class of its own. This system is constructed from 100% 304-stainless steel and features adjustable Active Autowerke double walled tips, making it ideal both for 2-door and 4-door models (also allows for cleaner fitment with diffusers).

This system uses factory style flanges making it a complete bolt on system that requires no cutting or welding. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust.

The sound is unobtrusive, with a rich mellow tone and delivers a solid 5+hp, with key gains in the mid-range. In addition, the Active Autowerke E9X M3 Signature Exhaust system features large 3" piping for maximum exhaust flow while maintaining enough back-pressure to result in horsepower increases across the entire RPM range.

The factory E9X M3 muffler features a Noise Canceling Chamber inside the muffler and Active Autowerke has retained this feature by adding two custom Active Autowerke noise canceling chambers (NCC)on each muffler to reduce/minimize the drone (the 'booming' noise some muffler emit at cruising speeds, ~3500 rpm).

The Active Autowerke E9X M3 Signature Exhaust System provides increase in horsepower, great sound and appearance making it a must for the true M3 enthusiasts.


Features:

  • Large 3-inch mandrel bent piping for maximum flow 
  • Durable, 100% 304 brushed stainless steel 
  • Double-walled 76mm Signature stainless tips
  • Revolutionary NCC -Noise Cancelling Chamber 
  • Adjustable Tips with Embossed Active Autowerke Logo
  • Improved power & torque throughout entire RPM band 
  • Gains of 5+ HP over stock configuration; Additional HP with our programmed software 
  • BMW factory style hardware makes a truly easy installation with no need for cutting or re-welding 
  • Weighs 40 Lbs vs. the factory of 55.1 Lbs.
  • Complete illustrated instruction manual
  • Two year warranty
Show More Show Less
Akrapovic - Corporate Logo
T#:9383747
Part#: M-BM/T/8HKTPDK
In Stock at Vendor
Starting at $ 7,034.99 USD
Starting at $ 7,034.99 USD
This axle-back exhaust system is manufactured entirely from titanium. This makes this system ideal for cutting weight while being structurally stronger than the OE exhaust system. The engineers at Akrapovic have retained the dual mode exhaust flap control from the original system. This allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, at higher RPM (or when selecting the S mode on the gearshift) the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car. The included exhaust pipe tips are made completely from titanium OR a carbon fiber/titanium composite to add a high-end, refined style. Performance has not been left out of the design. The system dramatically reduces backpressure and is an excellent starting point for further engine tuning or turbo modifications. Even when installed on an otherwise stock vehicle a gain of 7.3 horsepower and 17.4 Nm/12.8 lbs-ft of torque are achieved. Furthermore, a weight reduction of 3.0 kg/6.6 lbs. is realized. The OEM catalysts are retained, so no reflashing of the ECU is required and the check engine light will not be triggered. Titanium muffler with integrated exhaust valves Statistics: +7.3 HP (at 4400 rpm) +17.4 Nm/12.8 lbs-ft of torque (at 2350 rpm) 3 kg/6.6 lbs. lighter than stock Not for sale outside the US or Canada.
Show More Show Less

Akrapovic - Corporate Logo
T#:578666
Part#: S-BM-T-3H
Ships on Oct 20, 2026
$ 6,550.99 USD
$ 6,550.99 USD
The rear muffler incorporates two bypass valves to tailor the sound level to your needs. The whole system is made from ultra-light weight titanium with carbon fiber tips.

Akrapovic - Corporate Logo
T#:3018042
Part#: BM/T/21H-BC
Back Ordered
$ 10,143.99 USD
Free Shipping on orders $49 and up
Includes rounded Octagonal Carbon Fiber Exhaust Tips The exhaust tone is most noticeable as you move through the gears and accelerate, and this can be further controlled through the addition of the optional Akrapovic Sound Kit to provide increased aural pleasure. Akrapovic has achieved power gains of 10.9 HP at 6,000 rpm and torque increases of 10.3 lb/ft Torque at 6,000 rpm when tested on the Akrapovic dyno against a G80 M3 with a stock M Sport exhaust system for comparison.
Show More Show Less
Akrapovic - Corporate Logo
T#:391371
Part#: S-BM/T/1
Back Ordered
$ 9,111.99 USD
Free Shipping
$ 9,111.99 USD
Free Shipping

The Akrapovic Cat-back Titanium exhaust system for the BMW X5/X6 M is designed for drivers who demand more power and less weight. In addition to weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the X5/X6 M become music to ones ears. An optional wireless "dualmode" exhaust flap control allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, when the exhaust flap is opened the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Power gains come in at 5.3 hp (at 5300 RPM) and 8.4 Nm (at 5250 RPM) with just the exhaust alone, and a total weight savings of 32.7 lbs! That is a 42% overall reduced difference in weight from stock.

Not for sale outside the US or Canada.

This item fits the following BMWs:
2015+ F85 BMW X5 M
2015+ F86 BMW X6 M

Show More Show Less
Akrapovic - Corporate Logo
T#:340356
Part#: TMS177956
Back Ordered
Starting at $ 4,170.99 USD
Free Shipping
Starting at $ 4,170.99 USD
Free Shipping

The Akrapovic Evolution exhaust systems for the BMW F30 335i & F32 435 are the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, these systems feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes.

This Akrapovic Evolution exhaust improves upon the stock exhaust system of the BMW 335i in numerous areas. The first visible improvement is the additional power of 7.1 HP (at 5.850 rpm) and 10.7 Nm (at 3500 rpm). The range between 2.000 rpm and 3.000 rpm and at 3.500 rpm was particularly improved. A noticeable improvement can also be observed at high RPM where the Evolution gives more power. This sporty elegance makes this Bavarian machine stand out from the rest and offers the taste of a more powerful version, accentuated with the additional power gains and weight losses of the Evolution system. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock-level sound at normal cruising, and a joyful deep sporty note when driving the 335i more dynamically. The Evolution systems replace the stock exhaust from the catalytic converters back.

Because of size and dimensions of this exhaust, it can not be shipped via conventional carriers such as UPS or FedEx, and must be shipped via Truck Frieght shipping. Not for sale outside the US or Canada.

This Akrapovic Exhaust fits the following BMWs:
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
2014+ F36 BMW 435i Gran Coupe

Show More Show Less


Akrapovic - Corporate Logo
T#:2706134
Part#: S-BM/T/18H
Back Ordered
$ 7,546.99 USD
$ 7,546.99 USD
This is a high-grade lightweight titanium system, finished with hand-crafted carbon-fiber tailpipes and a high-grade austenitic stainless steel link pipe set. The valves on each side are calculated to tailor the sound, and two acoustic reflectors are fitted on the tailpipes to guide the sound into the car’s cabin. Because the Akrapovič Evolution Line (Titanium) exhaust system has two valves, one more than the stock configuration, a TNG controller is included in the product to activate the additional exhaust valve. To make the sound experience even more unique, there are two tuned resonators – developed especially for this new engine – producing a deep, rich, and sporty sound with no unwanted drone or streaming, perfectly aligned with the straight six-cylinder engine. It weighs 21.7 kg, which is 23% lighter than stock. Power gains of 11.8 hp at 5,600 rpm and torque increases of 17.1 Nm at 4,100 rpm were recorded when tested on the Akrapovič dyno
Show More Show Less
Akrapovic - Corporate Logo
T#:639261
Part#: ME-MIN/TI/1HKT
Back Ordered
$ 2,536.99 USD
$ 2,536.99 USD
Akrapovic - Corporate Logo
T#:8549432
Part#: S-BM/T/25
Ships in 3 Business Days
$ 11,913.99

This product was last offered at the strikethrough price on
10-01-2026

$ 11,318.99 USD
Free Shipping
$ 11,318.99 USD
Free Shipping
Constructed from high-grade lightweight titanium alloys, the Evolution Line (Titanium) exhaust system has been perfectly tuned to deliver the very best aural experience in all driving modes. Through extensive testing and development, the Akrapovič sound engineers have coaxed a deep, sporty, higher-frequency V8 sound from the car’s turbo engine, more akin to that of a muscle car, while keeping it smooth and eliminating any drone that might hamper the enjoyment. The full titanium exhaust system is finished with two sets of carbon-fibre / titanium tailpipes coming from a central muffler layout featuring two valves, one located on either side of the muffler. The housings are cast in-house in the Akrapovič foundry, and there is a cast collector on the link pipe, where gases from both sides of the engine mix, all designed to create a perfect sound. This plug-and-play exhaust system can be further regulated with the addition of the Akrapovič Sound Kit to control the valves in the exhaust and switch between the sound modes. See T#599277 for this sound kit. Fittment notice:This system does not fit on vehicles equipped with Otto particulate filter (OPF). This exhaust system is not CARB approved
Show More Show Less

Akrapovic - Corporate Logo
T#:7813205
Part#: S-BM/T/23
In Stock at Vendor
$ 11,724.99 USD
$ 11,724.99 USD
Constructed from high-grade lightweight titanium alloys, the Evolution Line (Titanium) exhaust system has been perfectly tuned to deliver the very best aural experience in all driving modes. Through extensive testing and development, the Akrapovič sound engineers have coaxed a deep, sporty, higher-frequency V8 sound from the car’s turbo engine, more akin to that of a muscle car, while keeping it smooth and eliminating any drone that might hamper the enjoyment. The full titanium exhaust system is finished with two sets of carbon-fibre / titanium tailpipes coming from a central muffler layout featuring two valves, one located on either side of the muffler. The housings are cast in-house in the Akrapovič foundry, and there is a cast collector on the link pipe, where gases from both sides of the engine mix, all designed to create a perfect sound. This plug-and-play exhaust system can be further regulated with the addition of the Akrapovič Sound Kit to control the valves in the exhaust and switch between the sound modes. Fittment notice:This system does not fit on vehicles equipped with Otto particulate filter (OPF). This exhaust system is not CARB approved
Show More Show Less

Active Autowerke - Corporate Logo
T#:2393396
Part#: 11-051
Ships in 3 Business Days
$ 3,562.99 USD
Free Shipping
$ 3,562.99 USD
Free Shipping
Active Autowerke is proud to announce the release of their Signature M2 Competition Exhaust System. This system is the result of countless hours of R&D to obtain the perfect combination of performance and sound. Constructed of 100% 304 TIG welded stainless steel, they have created a modular exhaust system that will provide enough flow to support power levels way above the stock M2 Competition. When installed as a complete unit, the exhaust diameter of our system never shrinks below 3.5” The rear section splits from a single 3.5” pipe in to dual 3.5” pipes; one of which is valved and leads straight to the exhaust tips with the other leading to a straight through muffler that reduces noise levels when the valve is closed. The Y-pipe is hand built to maintain maximum exhaust velocity throughout the entire system. With the reduced back pressure and large single-pipe design you can expect exhaust velocity to remain as high as possible throughout the entire system. The design is also capable of handling much higher power levels than stock. It’s over engineered to have no issues handling the increased exhaust volume from extensive modifications including turbo upgrades. The stock M2 Competition sounds great, but there’s always room for improvement! They configured 7 different muffler and resonator setups before settling on the final product. With the valve closed the system is slightly louder than stock but with a great note. With the valve open it’s significantly louder but without the metallic, hollow sound of a full straight pipe exhaust. MADE IN THE USA FEATURES: Mandrel bent 304-stainless construction Completely TIG Welded (No MIG Welding at all) Flow efficient Y-Pipe design Perfect fitment with adjustable 90mm double walled tips True 3.5” turbo back design Uses OEM valve motor Designed to be used at stock power levels along with highly modified engines No permanent modifications required Manufactured in house in Miami, FL.
Show More Show Less
Active Autowerke - Corporate Logo
T#:2393400
Part#: 11-051C
Ships in 3 Business Days
$ 4,037.99 USD
Free Shipping
$ 4,037.99 USD
Free Shipping
Active Autowerke is proud to announce the release of their Signature M2 Competition Exhaust System. This system is the result of countless hours of R&D to obtain the perfect combination of performance and sound. Constructed of 100% 304 TIG welded stainless steel, they have created a modular exhaust system that will provide enough flow to support power levels way above the stock M2 Competition. When installed as a complete unit, the exhaust diameter of our system never shrinks below 3.5” The rear section splits from a single 3.5” pipe in to dual 3.5” pipes; one of which is valved and leads straight to the exhaust tips with the other leading to a straight through muffler that reduces noise levels when the valve is closed. The Y-pipe is hand built to maintain maximum exhaust velocity throughout the entire system. With the reduced back pressure and large single-pipe design you can expect exhaust velocity to remain as high as possible throughout the entire system. The design is also capable of handling much higher power levels than stock. It’s over engineered to have no issues handling the increased exhaust volume from extensive modifications including turbo upgrades. The stock M2 Competition sounds great, but there’s always room for improvement! They configured 7 different muffler and resonator setups before settling on the final product. With the valve closed the system is slightly louder than stock but with a great note. With the valve open it’s significantly louder but without the metallic, hollow sound of a full straight pipe exhaust. MADE IN THE USA FEATURES: Mandrel bent 304-stainless construction Completely TIG Welded (No MIG Welding at all) Flow efficient Y-Pipe design Perfect fitment with adjustable 90mm double walled tips True 3.5” turbo back design Uses OEM valve motor Designed to be used at stock power levels along with highly modified engines No permanent modifications required Manufactured in house in Miami, FL.
Show More Show Less

Akrapovic - Corporate Logo
T#:394612
Part#: P-HF947
In Stock at Vendor
$ 974.99 USD
Free Shipping on orders $49 and up
The Akrapovic Sound Kit is a wireless exhaust valve control system that allows you full control over the valve system in your titanium Akrapovic exhaust. This enable you to open the exhaust valve when you want to turn as many heads as possible or keep it closed when your out for an easy Sunday drive.
Show More Show Less
Akrapovic - Corporate Logo
T#:54566514
Part#: AKRS-BM/T/38
In Stock at Vendor
New Item
$ 8,336.99 USD
$ 8,336.99 USD
Constructed entirely from proprietary, high-grade titanium, this catback system dramatically reduces weight over the bloated stock exhaust while optimizing exhaust gas flow to unlock hidden horsepower and torque.
Show More Show Less

Active Autowerke - Corporate Logo
T#:590346
Part#: 11-045MB
Ships in 3 Business Days
$ 3,629.00 USD
Free Shipping
$ 3,629.00 USD
Free Shipping
Active Autowerke is proud to announce the release of the Signature F8X M3/M4 Exhaust System. This system is the result of countless hours of R&D to obtain the perfect combination of performance and sound. Constructed of 100% 304 TIG welded stainless steel, Active Autowerke has created a modular exhaust system that will provide enough flow to support power levels way above the stock S55. The stock S55 Midpipe is a dual-pipe system from each turbo that leads to the rear muffler. The resulting sound is far from pleasant, and without any real scavenging effect the turbo lag is fairly pronounced. By converting to a single 3.5" pipe directly after the downpipes, AA's system promotes exhaust scavenging along with higher exhaust velocity to produce a quicker spool, more power, and a much smoother exhaust note.
Show More Show Less

Akrapovic - Corporate Logo
T#:340347
Part#: TMS3025
Back Ordered
Starting at $ 2,120.99 USD
Starting at $ 2,120.99 USD

The Mini is considered a car that always brings a smile to ones face with its playful look and particularly its position on the road, which is reminiscent of driving a go-kart. The engineers from Akrapovic prepared solutions for the little devil that further increase the performance of the Mini Cooper S and the Cooper S Cabrio as well make it sound even more appealing. Just by looking at the rear, we can see that it's an Akrapovic - namely, the rear boasts a dual exhaust system outlet of a larger diameter, shaped like racing exhausts. The homologated stainless steel aftermarket Evolution exhaust system with an integrated resonator and end muffler is equipped with adjustable tail pipes made of titanium or carbon fiber. The most demanding customers can also upgrade the Evolution exhaust system by using a down pipe with catalyst.

The Akrapovic exhaust system also improves sound characteristic, reduces drone and vibrations and makes driving even more enjoyable. The Evolution system, with the optional down pipe, greatly improves the motor's performance at all revolutions, which is evident from the performance chart. The system offers an additional 7,6 HP and 7 Nm. Additionally, improvements to weight are not negligible, since the Akrapovic exhaust system, made of stainless steel, together with the optional down pipe, weights 3,67 kilograms less than a stock exhaust system. Part # ME-MIN/TI/1H.

Evolution system, homologated:

  • exhaust system with integrated resonator and end muffler
  • titanium or carbon fiber tail pipes
     

     Hard facts:

  • plus 2,4 HP (at 5.500 rpm)
  • plus 5,6 Nm (at 3.530 rpm)
  • minus 2,3 kg
  • Dyno Chart

    Evolution system with optional down pipe:
  • down pipe (for off road use only)
  • exhaust system with integrated resonator and end muffler
  • titanium or carbon fiber tail pipes

    Hard facts:
  • plus 7,6 HP (at 5.900 rpm)
  • plus 7 Nm (at 3.400 rpm)
  • minus 3,67 kg

Dyno Chart

​This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

 

Not for sale outside the US or Canada.

This item fits the following MINIs:
2006+ R56 MINI MINI Cooper S
2007+ R57 MINI MINI Cooper S Convertible

Show More Show Less
Akrapovic - Corporate Logo
T#:639263
Part#: ME-MIN/TI/1HKT1
Ships on Oct 20, 2026
$ 2,358.99 USD
$ 2,358.99 USD


Akrapovic - Corporate Logo
T#:1362393
Part#: ME-BM/T/5KT
Back Ordered
$ 11,660.99 USD
Free Shipping
$ 11,660.99 USD
Free Shipping
The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovic R&D department, which is responsible for developing truly amazing exhaust system that offers more power, weighs less, and has an EC type-approval stamp at the same time. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Carbon-fibre tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The Akrapovic system includes muffler valves for both outlets (the stock system only uses one on the driver side). A valve controller and wiring harness are included to operate both valves from the stock wiring. This allows you to preserve the stock operation of the valves in Comfort, Sport, and Sport+ modes.
Show More Show Less
Akrapovic - Corporate Logo
T#:1362392
Part#: ME-BM/T/5KT1
Back Ordered
$ 11,620.99 USD
Free Shipping
$ 11,620.99 USD
Free Shipping
Akrapovic doesn't disappoint in the sound and engineering of the F87 M2 Competition Evolution exhaust. True to form, their cat-back system sounds exotic and beastly. It's a European supercar sound instead of American muscle. The Akrapovic Evolution exhaust is a high-flowing exhaust system, eliminating restriction from the mid-pipes to the rear muffler. The rear muffler incorporates two bypass valves to tailor the sound level to your needs. The mid-pipes and rear muffler are made from ultra-lightweight titanium with titanium tips. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Titanium tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovi? R&D department, which is responsible for developing truly amazing exhaust system that offer more power, weighs less, and have an EC type-approval stamp at the same time.
Show More Show Less
Akrapovic - Corporate Logo
T#:599277
Part#: P-HF1263
Back Ordered
$ 1,203.99 USD
Free Shipping on orders $49 and up
The optional Akrapovič Sound Kit enables owners of selected Akrapovič car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovič technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver (already included in evolution system) to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller or the new smartphone app (for iOS and Android) to regulate the valves. With the use of the optional Akrapovič Sound Kit, the ECE type approval is no longer valid. Pictures are symbolic.
Show More Show Less

Akrapovic - Corporate Logo
T#:394620
Part#: MTP-BM/SS/4HKT
Back Ordered
$ 4,485.99 USD
Free Shipping
$ 4,485.99 USD
Free Shipping

The Akrapovic Evolution exhaust systems for the BMW F22/23 M240i are the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, these systems feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes.

This Akrapovic Evolution exhaust improves upon the stock exhaust system of the BMW M240i in numerous areas. The first visible improvement is the additional power of 6.5 HP (at 5500 rpm) and 12.6 Nm (at 3000 rpm). The range between 2.000 rpm and 3.500 rpm  was particularly improved. A noticeable improvement can also be observed at high RPM where the Evolution gives more power. This sporty elegance makes this Bavarian machine stand out from the rest and offers the taste of a more powerful version, accentuated with the additional power gains and weight losses of the Evolution system. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock-level sound at normal cruising, and a joyful deep sporty note when driving the M240i more dynamically. The Evolution systems replace the stock exhaust from the catalytic converters back.

Fitment:
2017+ F22/23 BMW M240i

Show More Show Less

Akrapovic - Corporate Logo
T#:555420
Part#: ME-BM/T/4KT
Back Ordered
$ 10,712.99 USD
Free Shipping
$ 10,712.99 USD
Free Shipping
The included exhaust pipe tips are made completely from titanium to add a high-end, refined style.
Akrapovic - Corporate Logo
T#:394615
Part#: MTP-BM/SS/2HKT
Back Ordered
$ 4,822.99 USD
Free Shipping
$ 4,822.99 USD
Free Shipping

The Akrapovic Evolution exhaust systems for the BMW F30 340i & F32 440i are the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, these systems feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes.

This Akrapovic Evolution exhaust improves upon the stock exhaust system of the BMW 340i in numerous areas. The first visible improvement is the additional power of 4 HP (at 6400 rpm) and 6.3 Nm (at 2550 rpm). The range between 2.000 rpm and 3.500 rpm  was particularly improved. A noticeable improvement can also be observed at high RPM where the Evolution gives more power. This sporty elegance makes this Bavarian machine stand out from the rest and offers the taste of a more powerful version, accentuated with the additional power gains and weight losses of the Evolution system. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock-level sound at normal cruising, and a joyful deep sporty note when driving the 340i more dynamically. The Evolution systems replace the stock exhaust from the catalytic converters back.

Show More Show Less

Akrapovic - Corporate Logo
T#:340344
Part#: TMS12185
Back Ordered
Starting at $ 10,753.32 USD
Starting at $ 10,753.32 USD

The F10 M5 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M5 has been a welcome challenge to the Akrapovi? R&D department, which is responsible for developing truly amazing exhaust system that offer more power, weighs less, and have an EC type-approval stamp at the same time.

The new Evolution exhaust system consists of newly developed dual-outlet mufflers with exhaust valves, flow-optimized pipes, and a unique cast titanium X-shaped part with resonators. The X-pipe, valves, and flange assembly are produced in our foundry. To top off this work of art, we've got polished titanium and aerospace-grade carbon fiber tail pipes to choose from.

The Evolution system lowers the back pressure and gives the M5 more power and torque through the whole range of rpms. It increases responsiveness. The Evolution system offers an even greater difference in weight, improving the power-to-weight ratio. Gains are achieved without removing the catalytic converters. While developing this system, we especially focused on sound. An M5 with the Evolution system delivers a deep, aggressive roar when driven hard, coaxing bangs out of the unique tail pipes when shifting and going off the throttle. To top it all off, the Evolution system is drone free and works well with the M5's Active Noise Cancellation system - just like the valve system, which is regulated through the M5's settings. Not for sale outside the US or Canada.

 

Performance Stats           Stock                     Akrapovic                  Gain

Max Power (Hp)                562 @5990rpm     571.5 @5950 rpm       +10 hp @5950 rpm

Max Torque (lb-ft)             541 @4700 rpm    545.1 @4650 rpm       +12.5 lb-ft @5200 rpm 

Weight (lbs)                       83.8                       56.7                             -27.1 lbs  



Media:
F10 M5 Akrapovic Evolution Exhaust Video


This item fits the following BMWs:
2012+ F10 BMW M5

Show More Show Less
Akrapovic - Corporate Logo
T#:387942
Part#: ME-BM/T/8H
Back Ordered
$ 7,841.99 USD
$ 7,841.99 USD

Akrapovic doesn't disappoint in the sound and engineering of the F87 M2 Evolution exhaust. True to form, their downpipe-back system sounds exotic and beastly. It's a European supercar sound instead of American muscle. The Akrapovic Evolution exhaust is a straight pipe from the M2 downpipe to the rear muffler - no cats and no resonators to dampen the sound. The rear muffler incorporates two bypass valves to tailor the sound level to your needs. The whole system is made from ultra light weight titanium with carbon fiber tips.

Akrapovic M2 Evolution Exhaust Specs -

  • 13lbs lighter than stock
  • 9hp gain
  • 5ft-lbs torque gain

The Akrapovic system includes muffler valves for both outlets (the stock system only uses one on the driver side). A valve controller and wiring harness are included to operate both valves from the stock wiring. This allows you to preserve the stock operation of the valves in Comfort, Sport, and Sport+ modes. In addition, Akrapovic has their own optional sound controller that lets you open/close the valves from a key fob or phone app (iOS or Android).

An optional carbon fiber diffuser complements the carbon fiber Akrapovic exhaust tips. Not required for install, the carbon diffuser helps frame the rear exhaust tips and outlets and present a more muscular and athletic appearance.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.
Show More Show Less

Akrapovic - Corporate Logo
T#:555421
Part#: ME-BM/T/4KT1
Back Ordered
$ 10,753.99 USD
Free Shipping
$ 10,753.99 USD
Free Shipping
The included exhaust pipe tips are crafted from a carbon fiber/titanium composite. The carbon fiber version was developed on the MotoGP Safety Car, which is driven at sustained high speed, to guarantee uncompromised durability.
Show More Show Less

Akrapovic - Corporate Logo
T#:26671604
Part#: MTP-BM/SS/2H-L
Back Ordered
$ 4,822.99 USD
Free Shipping on orders $49 and up
The Akrapovic Evolution exhaust systems for the BMW F30 340i & F32 440i are the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, these systems feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes. This Akrapovic Evolution exhaust improves upon the stock exhaust system of the BMW 340i in numerous areas. The first visible improvement is the additional power of 4 HP (at 6400 rpm) and 6.3 Nm (at 2550 rpm). The range between 2.000 rpm and 3.500 rpm was particularly improved. A noticeable improvement can also be observed at high RPM where the Evolution gives more power. This sporty elegance makes this Bavarian machine stand out from the rest and offers the taste of a more powerful version, accentuated with the additional power gains and weight losses of the Evolution system. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock-level sound at normal cruising, and a joyful deep sporty note when driving the 340i more dynamically. The Evolution systems replace the stock exhaust from the catalytic converters back.
Show More Show Less
Akrapovic - Corporate Logo
T#:2706194
Part#: ME-BM/T/6HKT1
Back Ordered
$ 9,279.99 USD
$ 9,279.99 USD
The new Evolution exhaust system consists of newly developed dual-outlet mufflers with exhaust valves, flow-optimized pipes, and a unique cast titanium X-shaped part with resonators
Akrapovic - Corporate Logo
T#:2706193
Part#: ME-BM/T/6HKT
Back Ordered
$ 9,319.99 USD
$ 9,319.99 USD
The new Evolution exhaust system consists of newly developed dual-outlet mufflers with exhaust valves, flow-optimized pipes, and a unique cast titanium X-shaped part with resonators.


Active Autowerke - Corporate Logo
T#:397310
Part#: 11-001
In Stock
5% off MSRP $ 999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD
Free Shipping
5% off MSRP
$ 999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD
Free Shipping

Our Signature Exhaust is often considered to be the most iconic, period-correct system available for your BMW E36. Extensive R&D, flawless design and superior construction are all reasons why our BMW E36 M3 Gen 3 Signature Exhaust is the number one choice for the E36 enthusiast today. This BMW exhaust is eye catching, built of 100% new Brushed Finish 304 stainless steel, sporting large 54mm twin inlet pipes, smooth mandrel bends, and dual 76mm tips with the Active Autowerke Logo embossed allow this BMW exhaust system to not only perform at a level above all other but also allow one to enjoy its beauty. 

Engineering with the ease of install in mind this is a true bolt on system like no other. Performance gains are definite and satisfying, thanks to substantially higher flow rates over the stock system. The full Active Autowerke BMW E36 M3 Exhaust system weighs in at just 34lbs allowing for some much needed weight savings over the stock system. Emitting a F1 type sound when bolted onto a stock car with it's unique hexagon style muffler this system has become the benchmark by which all other E36 systems are judged. Pair it with our BMW Cold Air Intake for the best power gains! 

Kit Features:

  • Double-walled 76 mm stainless steel tips
  • Dyno-tested performance
  • New Brushed Finish 100% 304 stainless steel
  • Thicker exhaust flanges for a tighter seal
  • Large 54 mm twin inlet pipes
  • Mandrel Bent Piping
  • Illustrated instruction manual
  • One year warranty
  • True Bolt-on Design

Fits the following vehicles:
1995-1998 E36 BMW 325i/is 328i/is M3

Show More Show Less
Active Autowerke - Corporate Logo
T#:2393407
Part#: 11-074
Ships in 2 Business Days
$ 56.99 USD
Free Shipping on orders $49 and up
Needed for some added rear exhaust systems as the stock cable may be too short.
Active Autowerke - Corporate Logo
T#:40004859
Part#: 11-062A
Ships in 10 Business Days
5% off MSRP $ 1,199.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,139.99 USD
Free Shipping
5% off MSRP
$ 1,199.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,139.99 USD
Free Shipping
For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. The F Chassis B58 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance. Features Include: NO CEL for catalytic efficiency when using this downpipe Active EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment 4.50" diameter piping allows for maximum power output Quicker turbo spool Rated for up to 800 hp applications Withstands up to 1500 F Can reach operational efficiency within 9 seconds of startup Easily bolts-on no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability Active proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5-Year / 50,000 Mile Warranty (on shell and tube ends) and 2-Year / 25,000 Mile Warranty on the Catalytic core to original purchaser only - NOTE: warranty will be null and void if your car has excessive burble (greater than stock) as that physically destroys the catalytic core Made in Miami, Florida
Show More Show Less

Active Autowerke - Corporate Logo
T#:638569
Part#: 11-050
In Stock
$ 759.99 USD
Free Shipping
$ 759.99 USD
Free Shipping
The Active Autowerke F87 Mid Pipe was specifically designed to eliminate the highly restrictive nature of the S55 – thus creating optimal exhaust flow and drastically improving performance.

Active Autowerke - Corporate Logo
T#:22295072
Part#: 11-074G
Ships in 3 Business Days
$ 85.00 USD
Free Shipping
$ 85.00 USD
Free Shipping

BMW F8X G8X Exhaust Valve Cable Extender from Turner Motorsport is essential for upgrading your BMW's exhaust system, particularly if you're experiencing issues with stock cable lengths. This extender ensures a proper connection for rear exhaust systems that may have shorter cables.

  • Model Compatibility: Designed for BMW models F80, F82, F87, G80, G82, G87, and F97.
  • Proper Fit: Ensures a correct fit for rear exhaust systems, preventing any issues with cable length.
  • Available Lengths: Offered in 12-inch and 24-inch options to suit different needs.
  • Custom Lengths: Custom lengths available upon request for a tailored solution.
  • High-Quality Construction: Built to maintain the reliability and performance of your BMW’s exhaust system.
Show More Show Less
Active Autowerke - Corporate Logo
T#:5886937
Part#: 11-085
Ships in 3 Business Days
$ 2,849.99 USD
Free Shipping
$ 2,849.99 USD
Free Shipping
Active Autowerke is proud to release the advanced Active Autowerke Signature Catted Downpipes with GESI G-Sport cats for the BMW G80 M3 and G82 M4. While these cars have received rave reviews for their performance, the sound is a muffled one leaving the driver to wonder if they are really driving a BMW M-car. In order to solve this, Active Autowerke has created a full exhaust system for the G80/G82 which comprises this mid-pipe, a rear axle-back valved exhaust and a set of GESI catted downpipes. Together, this remake of the stock exhaust results in a G80/G82 with an amazing sound. You will feel like you are driving a true M-car again. This variant includes a pair of 4.5" ultra high flow GESI catalytic converters that will NOT produce a CEL. The GESi G-Sport Ultra High Output Catalytic Converter features full 304 stainless steel construction, including the substrate. GESi UHO-Series Catalytic Converters are EPA registered and compliant in 49 states and fully OBD2 compliant, perfect for use on 1996 and newer vehicles. GESi proprietary precious metal loading technology ensures greatly reduced emissions, eliminating most "Check Engine Lights". These high flow catalytic converters outperform stock converters and provide a reliable solution to the most common catalytic converter problems. FEATURES: NO CEL when using these downpipes GESI EPA registered high flow and fully OBD2 compliant The most advanced cats produced by GESI today Casted upper stainless steel V-Band for precise fitment 4.50" diameter piping allows for maximum power output Quicker turbo spool Rated for 500 to 850 hp applications per cat Withstands up to 1500 F Can reach operational efficiency within 9 seconds of startup Easily bolts-on 2013 no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability GESI proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter) Made in Miami, Florida
Show More Show Less

Akrapovic - Corporate Logo
T#:26638245
Part#: P-EXT002
In Stock
$ 44.99 USD
Free Shipping on orders $49 and up
Akrapovic is recognized as a leader in its industry, celebrated for its groundbreaking materials technology and inventive solutions. The brand is synonymous with exceptional design, performance improvement, and the development of a unique, deeply resonant exhaust sound. With a dedicated team of over 1000 passionate and highly skilled employees, Akrapovic crafts products for motorcycles and performance cars using state-of-the-art technology, advanced processes, and the highest quality materials obtainable.
Show More Show Less
Active Autowerke - Corporate Logo
T#:638600
Part#: 11-062
In Stock
5% off MSRP $ 1,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,424.99 USD
Free Shipping
5% off MSRP
$ 1,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,424.99 USD
Free Shipping
For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. The F Chassis B58 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance. Features Include NO CEL when using this downpipe GESI EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment 4.50" diameter piping allows for maximum power output Quicker turbo spool Rated for 500 to 850 hp applications Withstands up to 1500° F Can reach operational efficiency within 9 seconds of startup Easily bolts-on – no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA certified for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability GESi® proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5-Year / 50,000 Mile Warranty (on shell and tube ends) and 2 year / 25,000 Mile Warranty on the Catalytic core to original purchaser only - NOTE: warranty will be null and void if your car has excessive burble (greater than stock) as that physically destroys the catalytic core Made in Miami, Florida
Show More Show Less

Active Autowerke - Corporate Logo
T#:2393422
Part#: 11-080
Ships in 3 Business Days
$ 2,849.99 USD
Free Shipping
$ 2,849.99 USD
Free Shipping
For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. Developed for precise fitment on the F87 M2C, F80 M3 and F82 BMW M4, the difference in performance will be noticeable the moment you leave your driveway! Features: NO CEL when using this downpipe Quicker turbo spool and response Less restrictive, more free flowing Improved low end and mid range performance as well as higher boost levels GESI EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment Withstands up to 1500F Can reach operational efficiency within 9 seconds of startup Easily bolts-on with no cutting or welding required Accepts OEM O2 sensor heat shield Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability GESI proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter) Made in Miami, Florida
Show More Show Less

Active Autowerke - Corporate Logo
T#:397460
Part#: 11-021
In Stock
$ 721.99 USD
Free Shipping
$ 721.99 USD
Free Shipping
Optimal power, performance and sound are the core values of our Active Autowerke BMW 328i exhaust system, designed to fit BMW 325i, 328i, and 330i E9X N52 models. A free-flow design and beefy 80mm dual exhaust tips allow 35% to 40% more exhaust flow than the stock BMW 328i exhaust system. The increased flow minimizes back pressure, resulting in substantial HP and torque gains. The system’s Brushed stainless steel construction also makes a bold visual statement, while also increasing durability. Factory-fit specifications are followed closely, yet AA's system allows 14lbs in weight savings as opposed to the factory BMW exhaust. This exhaust features the Active Autowerke Muffler and Noise Cancellation Chamber to assist in reducing/eliminating drone. Manufactured from 100% brushed 304 stainless steel, this clamp-on system is suited for the N52 owner looking to bring their BMW's performance to new heights. NOTE: This exhaust may not easily fit some of the XI (4WD) and Station Wagon Models - welding may be required for proper fitment of the exhaust to stock pipe. Exhaust system requires cutting of the factory pipe for installation. Dimensions and cutting points are highlighted in the instructions. Some models have a round tubular pipe that makes the installation seamless. Other models have an oblong shape and will require welding instead of clamping. KEY FEATURES: Fits BMW 325i, 328i, 330i Full 304 stainless steel construction with brushed finish 3" Mandrel-bent piping for optimum exhaust flow Straight through muffler design NCC (Drone Reduction) Dual 80mm Active Autowerke Signature tips, staggered Weight Savings *14lbs lighter than stock BMW exhaust* Designed to use existing factory mounts and hardware Fully adjustable mounting positions Fully adjustable tips Illustrated instruction manual Two year warranty Fits all E9X vehicles with the N52 engine. Requires cutting and welding of the stock system for fitment. Includes instructions for installation process.
Show More Show Less
Active Autowerke - Corporate Logo
T#:599319
Part#: 11-040-C
In Stock
$ 1,424.99 USD
Free Shipping
$ 1,424.99 USD
Free Shipping
BMW introduced a new valvetronic, single turbo version of its direct-injection engine for the F-Chassis models beginning in 2012. The Active Autowerke N55 downpipe for the M235i, 335i, 435i and M2 helps unleash some of the potential that is restricted by the OEM downpipe. Turbochargers are powered by spent exhaust gases created during the combustion process. The quicker these gases are evacuated, the better. Unfortunately, the factory down pipe in the N55 is quite restrictive, which results in slower exhaust gases and slower turbo spool. The Active Autowerke F-Chassis N55 Signature down pipe utilizes 3.5” diameter stainless steel piping in order to provide more power, quicker spool, and extreme durability. This variant includes a 4.5" high flow GESI catalytic converter that will NOT produce a CEL! The GESi® G-Sport Ultra High Output Catalytic Converter features full 304 stainless steel construction, including the substrate. GESi® UHO-Series Catalytic Converters are EPA certified in 49 states and fully OBD2 compliant. GESi® proprietary precious metal loading technology ensures greatly reduced emissions, eliminating most "Check Engine Lights". These high flow catalytic converters outperform stock converters and provide a reliable solution to the most common catalytic converter problems. The GESi® UHO-Series Catalytic Converters are rated for engines putting out between 500 and 850 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests! Please Note: These catalytic converters are not legal for use on vehicles registered in the state of California as a result of California Vehicle Code Section 27156 and 38391.
Show More Show Less
Active Autowerke - Corporate Logo
T#:5886981
Part#: 11-079
Ships in 3 Business Days
$ 1,424.99 USD
Free Shipping
$ 1,424.99 USD
Free Shipping
The Active Autowerke F-Chassis N20 Signature down pipe utilizes 3.5 diameter stainless steel piping in order to provide more power, quicker spool, and extreme durability. The GESi UHO-Series Catalytic Converters are rated for engines putting out between 500 and 850 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests! Features: NO CEL when using this downpipe Designed to be as unrestrictive as possible GESI EPA registered high flow and fully OBD2 compliant High flow 4" GESI cat with 3.50" piping allows for maximum power output Quicker turbo spool - improved power over stock Rated for 350 to 500 hp applications Withstands up to 1500 F Can reach operational efficiency within 9 seconds of startup Easily bolts-on no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Modular design for later upgrades Made in Miami, Florida Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California Full 304 stainless steel construction 304 stainless steel substrate in the catalytic converter is furnace braised to the mantle for outstanding durability GESi proprietary precious metal loading technology ensures greatly reduced emissions Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter) Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise ACTIVE AUTOWERKE N20 SIGNATURE DOWNPIPE BENEFITS The speed of a turbo's impeller wheel is limited by exhaust back pressure. A larger down pipe relieves some of this pressure, resulting in quicker and more efficient spool. With Active Autowerke's Signature downpipe, your N20 can rev quicker, and deliver more horsepower and torque. Minimizing back pressure while remaining daily drive-ability was the goal of our N20 downpipe. Owners can now upgrade to a product that is affordable, reliable, and easy to install. After months of research and development, our engineers settled on a 3.5 diameter pipe which utilizes the least number of bends possible. However, the Signature N20 down pipe still fits easily into the OEM location, with a painless installation process. Constructed entirely from 304 stainless steel with 1.5MM wall thickness, we are confident that you'll be pleased with how robust and durable this down pipe is. Trouble-free installation and a long lifespan ensure that you'll enjoy many miles of performance with your N20!
Show More Show Less


Active Autowerke - Corporate Logo
T#:641583
Part#: 11-073
Ships in 10 Business Days
$ 2,374.99 USD
Free Shipping
$ 2,374.99 USD
Free Shipping

Elevate the performance and sound of your BMW F80 M3 or F82 M4 with the Active Autowerke F8X rear exhaust, now available at Turner Motorsport. Crafted with over 30 years of expertise, this exhaust system is designed to eliminate the unflattering factory M3 and M4 exhaust sound while optimizing flow and resonance. The result is a deep, throaty growl, enhancing the overall driving experience. Active Autowerke's dedication to quality is evident in every aspect, from addressing the stock OEM exhaust sound to creating an exhaust worthy of an "M" car. The newly introduced "Max Max" valved version further enhances performance and sound, providing the ultimate solution for BMW enthusiasts.

  • Improved exhaust sound for BMW F80 M3 and F82 M4
  • Optimal flow and resonance
  • "Max Max" valved version for enhanced performance
  • Made in the USA
  • Significant power gains: 18+ WHP and 30+ LB-FT over stock*
  • Quicker turbo spool
  • Low, deep rumble for an enhanced driving experience
  • Flex joints reduce vibration
  • Double-canned muffler reduces resonance
  • Guaranteed fit for all F80 BMW M3/F82 BMW M4
  • Includes all necessary installation hardware
Show More Show Less
Akrapovic - Corporate Logo
T#:26238361
Part#: S-BM/T/34H
In Stock
$ 5,695.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5,439.99 USD
Limited Qty Sale
Free Shipping
$ 5,695.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5,439.99 USD
Limited Qty Sale
Free Shipping

Premium-Grade Titanium Exhaust System for BMW M2

Upgrade your BMW M2 with this premium-grade titanium exhaust system from Akrapovič. Crafted with lightweight titanium and handcrafted carbon-fibre tailpipes, this system offers a remarkable 32.7% reduction in weight compared to stock. The Slip-On Line (Titanium) option includes an exclusive Akrapovič control kit for an immersive auditory experience. Enjoy a luxurious resonance during regular cruising, transitioning into a robust, sporty tone when pushing the limits. With seamless sound delivery across all RPM ranges, this exhaust system perfectly blends comfort and athleticism. Its innovative octagonal design with carbon-fibre-clad tailpipes adds sophistication to your vehicle. Experience power gains of 3.9 kW (5.3 hp) at 2,800 rpm and a torque increase of 13.5 Nm at the same RPM without the need for remapping. Compatible with all vehicles.

Show More Show Less