BMW Exhaust Parts, Mufflers & Catalytic Converters

Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.

Our new E36 cat back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.

To accomplish these goals our engineers rev’d up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.
We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.

Non-M Fitment:
?Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Why the upgrade?

By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:

- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.

- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.

- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our Axle Back exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.

Features and Benefits:

Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:

Durable 304SS
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section

Born from our own experiences and profound love for the E30, each aspect of our exhaust was designed to enhance your E30 experience. Introducing our revolutionary E30 Exhaust for the 325, an exhaust option that redefines performance and style. Crafted to be lighter, bolder, and more efficient, this exhaust system is designed to make a statement on the road.

Our exhaust is all about making life easier. With factory-style flanges that bolt straight onto your existing converter, you won't be wasting time or cash on complex installations. And those angled slash-cut tips? They're not just for show, they're a statement, blending style with a hint of attitude.

Engineered for maximum enjoyment, this exhaust system boasts dual 2.25” mandrel bent stainless steel tubes, ensuring a smooth flow path for optimal efficiency. The result? A growling, low-toned exhaust note that's music to your ears and a nod to German engineering at its finest.

Our E30 Exhaust doesn't just enhance performance; it's also designed with practicality in mind. Featuring period-correct styled exhaust tips, increased exhaust pipe diameter, and an upgraded center mounting solution, every detail is crafted for perfection.

This exhaust system retains factory flanges and hanger locations, ensuring a seamless fit and easy installation process. Plus, with a Helmholtz resonator strategically integrated to mitigate drone around 2200 RPMs, you'll enjoy a refined driving experience without sacrificing performance.

Experience the perfect combination of beauty and aggression with Turner's E30 Exhaust for the 325 where innovation meets heritage, and performance meets period-correct style.

Features and Benefits:

Improved flow
Increased pipe diameter (dual 2.25")
Lightweight (28.5lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Helmholtz resonator mitigates exhaust drone around 2200rpm
Retains factory emissions
Utilizes factory exhaust hangers
Design:

Durable 304SS
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing
Integrated X-pipe
Freer flow for increased power, and a louder, more engaging driving experience
Upgrade mounting utilizing factory and additional included hanger
Offset flange sizes to mate perfectly to the factory converter flanges

Presenting our Turner Motorsport Performance Cat-Back Exhaust, tailor-made for your 330 or 430. Immerse yourself in an enhanced driving adventure as this meticulously engineered exhaust takes your B46/B48-equipped car to exhilarating new heights. With an unwavering commitment to performance and quality, the Turner exhaust is crafted to unlock the full potential of your F chassis.

Experience a symphony of performance and sound, coupled with a visual upgrade through the quad exit exhaust tips that amplify the motorsport essence of your vehicle. Elevate your driving encounters with the Turner Motorsport cat-back exhaust - unleash the power, reveal the glorious sound, and capture attention wherever you go.

Incorporating their distinctive design principles, this exhaust produces a commanding, deep tone, revealing the bold personality of the revolutionary line of 4-cylinder turbo engines. Leveraging the factory valve control, the Turner cat-back ensures an exciting sound during acceleration, seamlessly blending the high-performance sound with daily driving convenience. Crafted from 1.25mm wall T304 stainless steel, Turner's exhaust boasts superior durability, corrosion resistance, and aesthetic appeal.

Designed with the customer in mind, the installation is a breeze, featuring a straightforward bolt-on process using factory slip joints and mounting locations. Your exhaust system includes all the necessary clamps and hardware for a hassle-free installation. Upgrade your 330/430 with the Turner Motorsport cat-back and let every drive become a statement of power and style.

Upgrading the sound:

Our exhaust allows you to turn up the volume and let the B46/B48 boast its smooth and hearty exhaust tone. Let's be honest, what's the point of owning a B48 if you're not going to upgrade the exhaust? Our signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of B48 sound!

How the cat-back is designed:

To create a cat-back exhaust for this incredible vehicle the upgrade happens right at the downpipe. Turner replaced the factory components with oversized 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep the flow to a maximum! With smooth mandrel bent transitions, this exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is Turner's signature B46/B48 muffler with a beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 3.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Pronounced dual 3.0" Exhaust tip options
17 lb weight savings (Factory - 55lbs, Turner 38lbs)
Kit Contents:

3.0" front exhaust section
Full 3.0" lightweight free-flowing midsection for better sound, performance, and weight savings.
Valved rear muffler
Valve extension harness
Clamps and hardware for an OEM+ install
Optional dual 3.0" exhaust tips
Optional OBD plug-in
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Optional OBD Plug-In:

The factory-valved muffler is not only controlled by different driving modes like comfort, sport, and sport plus but the RPM also plays into whether the valves are opened or closed. If you are looking for a solution to define whether your exhaust valve is fully opened or closed then you should look into adding an OBD plug-in that features Bluetooth valve control from your phone. During testing, the best way to choose whether your valve is open or closed for your sound preference is through an OBD-linked application on your phone. Included in this kit are optional OBD extensions to not only gain diagnostic function but also gain the ability to influence widgets on your vehicle such as valve position on your valved muffler.

Here at Turner our mission was to amplify the G80/G82 with a proper catback exhaust system. To accomplish this goal, our engineers increased flow and delivered an exhaust system that captures the full unrestricted sound of the sonorous twin turbo inline-6 S58 engine. The increase in flow was gained from smooth flow path dual 3.0" stainless exhaust pipes that feed into one of the best designed mufflers on the market. Our engineers specifically designed the muffler with flow in mind to ensure that even with the exhaust valves closed, our muffler flows better and sounds better than the stock muffler. The best part of our Turner performance catback is the capability to control just how aggressive you want to your exhaust to sound, far beyond the point that the factory exhaust is able to perform. All of this plus the direct fitment and straight forward installation leads to our valved exhaust being the clear answer in your mission to find the best exhaust for your S58 powered G80 or G82.

The G80 took the world by storm by breaking the mold of BMW's standard design language. With the G80 and G82, a whole new generation of M car owners emerged. At first people were hesitant about the larger more distinguished front grilles, but after the shock was gone the true glory of BMW's newest M cars began to shine. The G80 M3 and G82 M4 are incredibly capable cars out of the box and Turner's large range of upgrades means the sky is the limit. Give your G80 or G82 the aggressive exhaust note that you wanted from the factory with Turner Motorsport's G80 G82 Stainless Valved Catback Exhaust.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Valved Muffler:
Optimized for superior flow over OEM
T304 Stainless Steel
Utilizes factory valve control
Performance:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +14 ft/lbs @ 3850 RPM
Horsepower gains: +10 HP @ 3850 RPM
Smoother horsepower and torque delivery from 3000-6500 RPM ​
Performance Paired with Turner S58 Intake:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +23 ft/lbs @ 3850 RPM
Horsepower gains: +17 HP @ 3850 RPM
Kit Contents:

Dual 3" Stainless Exhaust piping from secondary cats.
X pipe replacing middle muffler sections for better sound, performance and weight savings.
Valved muffler utilizing oem style exhaust valves
Optional Turner Slant Cut or Straight Cut Exhaust tips - 3.0" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers

Performance Catback Exhaust for pure unrestricted power and sound. This exhaust takes out all of the stop gates and pairs with the N55 for an iconic driving experience.

Take your N55 to the next level and show the S55 drivers who is boss with our Turner Race-Inspired Catback. This light weight and free flowing exhaust boasts a smooth, clean, and rowdy exhaust note. Although the N55 found in the F chassis of BMW features a loud "cold start" once the car is warmed up the exhaust lacks character and volume. The twin scroll turbo featured on your M2 does a great job of limiting the volume on the factory exhaust but we want to hear the exhaust! No more boring and subtle exhaust, in comes our Turner catback to drop weight, get rid of restrictions and release the full engine and turbo sounds!

When you are shopping for an F87 M2 you have two options to choose from. Your choice can be the standard M2 with the N55 engine or the M2 Competition that comes equipped with the S55. The best part about either the competition or non-comp M2 is you are still getting the "M" suspension, characteristics and drive. From our experience there is not a big trade off between the two models that can justify the price difference. With the N55 you get a lighter weight and extremely capable weapon. Paired with an intake, tune, and the our lightweight exhaust the M2 is not a car to be messed with.

We set out to amplify the N55 M2 with a proper catback exhaust system. To accomplish this goal, our engineers increased flow, reduced your exhaust weight to a total of 28lbs, and delivered an exhaust system that captures the full unrestricted sound of the sonorous twin scroll turbo inline-6 N55 engine. The increase in flow is gained from true 3.0" 304 stainless steel front section that feeds into the straight-through free flowing rear section. We specifically designed this catback with flow in mind to ensure the exhaust would never be a restriction. Weight reduction is achieved by replacing the factory mufflers and resonators with straight through lightweight stainless for the most weight advantage possible. The best part of the race inspired catback is the capability to perform far beyond the point that the factory exhaust.

Sound clips featured on the ECS Tuning YouTube Channel: - CLICK HERE -

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0" combined with dual 2.5"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
28lb total weight for full catback exhaust
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Features and Benefits:

True Motorsport inspiration
Weight reduction
Free flowing (unlimited flow)
Reduction in back pressure for increased torque and horsepower
Quad exit tips
Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe flange)
Light weight free-flowing middle muffler sections for better sound, performance and weight savings.
Straight through "Race inspired" rear section
Optional Turner Exhaust tips - 2.5" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers
Product Development:

Our F87 Race Inspired Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

When we set out to build an exhaust for the BMW E46 323/328, we knew it needed to match how you drive and how you want your car to sound. We also know that while many drivers wish for an aggressive, head-turning exhaust note, they don’t always want the volume all the time. That’s why we engineered this lightweight Turner Motorsport performance exhaust system with a fully valved muffler, giving you the ability to switch between a refined, quiet tone and a loud, spirited sound at any moment.

Our new Turner Cat-Back Exhaust is the first valved rear section designed specifically for the E46 323/328. With the included remote controller, you can change your exhaust tone with a simple click. With the valve closed, the system delivers a smooth, deep, tasteful note for daily driving. Open the valve, and you unlock an aggressive, free-flowing exhaust tone that brings out the full character of the M52 engine, perfect for track days or anytime you want maximum sound and performance.

For maximum flow and durability, we built this system using dual 2.0" T304 stainless steel mid-pipes that bolt directly to your factory downpipes. Inside the mid-section, we integrated an X-pipe to balance exhaust pulses, reduce backpressure, increase performance, and smooth the exhaust note. The dual 2.0" mid-pipes merge into a 3.0" axle-back section and a full 3.0" valved muffler, finished with bold 3.0" integrated tips that perfectly fill the E46 rear bumper.

Modern performance cars use valved exhaust systems as standard equipment, but the E46 never truly benefited from that technology. Some early E46 models used a basic vacuum-controlled valve, but after nearly 20 years, most are no longer functional. By studying BMW’s original concept and improving it with modern engineering, we created a lightweight, high-performance valved exhaust that gives your BMW E46 323/328 modern sound control, better flow, and a dramatically enhanced driving experience.

Part Design & Engineering

In-house Turner Motorsport design using FARO ARM laser scanning and SolidWorks 3D CAD for precise BMW E46 fitment
T304 stainless steel construction with 1.25mm wall thickness, TIG-welded and back-purged for superior strength
2.0"–3.0" mandrel-bent stainless tubing for optimal flow and performance
T304 stainless 12mm barbed hangers TIG-welded in OE locations for perfect alignment
Direct-fit flanges engineered to bolt to factory BMW 323/328 downpipes
Over 20 lbs lighter than the factory cat-back exhaust
Designed for smoother flow, reduced backpressure, and improved exhaust tone
Kit Contents

2.0" Mid-section with integrated X-pipe
New center exhaust brace
3.0" valved muffler with integrated 3.0" tips
Valve controller with installation kit and two remote fobs
New downpipe hardware to replace seized factory studs
All required gaskets, clamps, and installation hardware

Enhance your BMW driving experience with the Turner Motorsport E9X 335i (N55) Valved Catback Exhaust. Designed for hearty exhaust notes and improved performance, this exhaust system offers a subtle factory-like sound with closed valves and a menacing growl when opened. Crafted with Mandrel bent dual 2.5” 304SS pipes and a high-flow valved stainless steel muffler, it ensures efficient gas flow.

The kit includes Turner Mid Pipes, a Valved Exhaust, Muffler Valve Controller Kit, and engraved Exhaust Tips. Accuseal slip-fit joints simplify installation, making it a bolt-on replacement for the OE version. The full exhaust system is available as Axle Back, Cat-back, or a full Turbo back system, providing a dual-purpose solution for both your neighbors and your desire for volume.

Key Features:

• Mandrel bent dual 2.5” 304SS pipes with brushed finish
• Turner Engraved Polished exhaust tips
• High flow, valved, stainless steel mufflers
• Accuseal slip-fit joints for easy fitment
• Utilizes factory exhaust hangers

N55 Carbon Intake:

Upgrade your N55 engine with the Turner Carbon Intake, breaking away from common setups. The dual inlet design adds functionality without compromising engine bay aesthetics. Located in the "sweet spot," the second inlet maximizes airflow and lowers intake air temps. The bellmouth velocity stack design reduces turbulence for a satisfying flutter after throttle release. The carbon fiber airbox and intake tube feature a gloss clear coat for UV protection, offering a beautiful OEM+ upgrade.

Turner Carbon Fiber Intakes are CAD-designed, ensuring optimal airflow improvement over stock. The kit includes a Carbon Intake Tube, Full Carbon 2 Piece Airbox, Bellmouth Velocity Stack Cone Filter, Billet Turbo Inlet Adapter, Silicone Coupler, and Hardware for Installation.

Key Benefits:

• Increased flow over the factory intake
• Carbon fiber airbox and intake tube with gloss clear coat
• CAD-Designed for perfect integration
• Custom high-flow air filter
• Smooth interior carbon inlet tube for optimal airflow

Design Features:

Carbon Fiber Intake Tube:

• Smooth interior without corrugations for a streamlined flow path
• Integrated carbon flange for secure mounting
• 2x2 twill weave carbon fiber construction
• Gloss finish clear coat for UV protection
• 4-ply reinforced silicone coupler and 6061-T6 black anodized aluminum flange

Air Box:

• 2X2 twill weave carbon fiber construction
• Gloss finish clear coat for UV resistance
• Mounts in stock location with supplied hardware

Air Filter:

• Conical hi-flow reusable air filter
• 8 ply oiled cotton gauze construction
• Bellmouth (velocity stack) filter flange inlet for reduced turbulence and maximized flow

Unleash the roar of your N52 engine with the Turner Motorsport E9x N52 Muffler & Resonator Delete Kit. Elevate your driving experience by transforming your exhaust with this cost-effective kit, providing performance gains, a captivating exhaust note, and stunning exhaust tips. Shedding the heavy factory muffler, Turner's T304 stainless steel 3.0" tubing replaces it, delivering a lighter, high-flow solution compatible with the OEM rear valance. Easy to install with hand tools, this muffler delete adds a powerful sound without significant drone, while shaving off about 20lbs from your vehicle. Upgrade your N52 without replacing the entire exhaust system!

Key Features:

• Turner designed Muffler & Resonator Delete for N52 engine
• T304 stainless steel construction with 1.25mm wall thickness
• CNC mandrel-bent 3.0" tubing for optimal exhaust gas routing
• Tig-welded exhaust hangers for direct fitment
• Hand-Tig welded joints for durability
• Stainless steel Accuseal exhaust clamps for a leak-proof seal
• Large radius bends ensure smooth transitions for optimal flow

Kit Includes:

• Y-pipe section
• Tailpipe section
• Dual 3.0" exhaust tips (Black Chrome finish)
• Stainless steel Accuseal exhaust clamps

See and hear the difference on the ECS YouTube page.

New to our line of exceptional performance upgrades for your BMW, the Turner Motorsport E9X M3 (S65) Titanium Valved Axle-back exhaust system is here to improve your driving experience with hearty exhaust notes and a noticeable bump in performance. With the muffler valves closed, this exhaust is both tame and fine tuned. Nobody will suspect your car even has an aftermarket exhaust system, it will sound similar to the factory system but with the perfect hint of exotic character. When you open up the valves, using the supplied valve controller, this exhaust transforms your car into the exotic beast that it is!

Now, we get it, not everyone can, or wants to delete their factory cats. Whether it be emissions testing or a check engine light, the smell of unfiltered exhaust, the very aggressive sound, or warranty reasons. Whatever the reason, We've got you covered! This exhaust setup leaves all 4 factory cats in place, making it 100% emissions legal for everyone.

This exhaust sports Mandrel bent dual 2.5” Ti22 pipes, with exhaust gases flowing through efficient piping to High flow, valved, Ti22 mufflers. Designed to mount with the factory exhaust hangers, this exhaust is a bolt-on replacement for the OE version. To help reduce the time you spend under the car installing the system, Accuseal slip-fit joints are included to make fitment as easy as possible. The Turner Motorsport full exhaust system includes a High flow, valved,Ti22 muffler and is available as an Axle Back, Cat-back system, as well as a full Turbo back system.

Give your M3 the dual-purpose exhaust system that satisfies your need for sound while having the ability to drive through the neighborhood at night with the Turner Motorsport E9X M3 full exhaust system!

Kit Includes:

Turner Axle back Exhaust with X pipe
Turner Adapter pipes for Factory Mid Pipes
Turner Muffler Valve Controller Kit
Turner Engraved Exhaust Tips
Features:

Mandrel bent dual 2.5” Ti22 pipe with brushed finish
Turner Engraved Brushed exhaust tips
High flow, valved, stainless steel mufflers
Accuseal slip fit joints for easy fitment
Utilizes factory exhaust hangers

Revolutionize your driving experience with the E46 M3 Valved Performance Catback Exhaust from Turner. Crafted for the discerning driver, this lightweight and free-flowing exhaust boast two independent valved mufflers, offering two distinct driving experiences. Shedding 19lbs or more from the factory exhaust, the Turner catback delivers refined daily driving with closed valves, providing a smooth exhaust note. When the valves open, unleash an untamed racecar roar, experiencing heightened performance and a pure S54 sound. The flexibility to switch between the two at the touch of a button offers the best of both worlds.

Key Features:

• 19lbs or more weight savings
• In-house design using FARO ARM laser scanning and SolidWorks 3D CAD modeling
• Retains factory emissions
• Compatible with factory or aftermarket headers/front sections
• Mandrel-bent dual 2.5" 304SS pipe
• High-flow dual valved, stainless steel mufflers
• Vacuum actuated valves for adjustable sound
• Integrated x-pipe for improved exhaust note
• Kit includes E46 M3 midsection, dual valved mufflers, valve actuators, remote key fobs, exhaust gaskets and hardware, new center exhaust hangers
• Optional 3.5" Brushed or Chrome tips
• Free Doorbuster: S54 Open Intake

S54 Open Intake:

Amplify airflow and let your S54 breathe with the Turner Open Intake System. With a 200% greater flow than the factory airbox, this intake enhances induction noises, providing an exhilarating auditory experience. The design integrates seamlessly with OE fresh air scoops, maintaining stock mounting locations and incorporating a 4" conical filter for maximum flow and filtration efficiency.

Features:

• 200% greater flow than the factory airbox
• Wrinkle Black Powdercoated Heat Shield
• Precision fit heat shield for cool air intake
• Utilizes OE fresh air inlet scoop
• Aluminum MAF housing maintains OEM MAF scaling
• 4" conical hi-flow reusable air filter

TURNER E46 330 VALVED CAT-BACK EXHAUST

When you're choosing an exhaust, you shouldn’t have to compromise between spirited performance and neighborhood-friendly volume. The Turner Valved Cat-Back Exhaust delivers the best of both worlds: tame when you want it, rowdy when you don’t! Lightweight, performance-driven, and specifically designed for your E46, this exhaust offers instant control over your car’s sound and power output.

With a simple press of a button, the exhaust valves adjust to match your mood or driving environment. Keep them closed for a deep, resonant tone or open them wide for full-throttle power and exhilarating sound. Engineered to withstand high performance and everyday driving, this exhaust will elevate your BMW experience.

Key Features:

Dual 2.5" Stainless Steel Mid-Pipes: Smooth airflow for reduced back pressure, connecting seamlessly to factory downpipes. Integrated X-Pipe: Reduces back pressure and improves exhaust tone. Full 3" Valved Muffler: Delivers aggressive sound when open; quiet and refined when closed. Integrated 3" Tips: Perfectly fill the rear diffuser with a polished finish. Lightweight Design: 23 lb weight reduction over factory exhaust. Complete Kit Includes:

2.5" Mid-section with X-pipe integration 3" Valved Muffler and integrated tips Exhaust valve control kit with two remote key fobs Gaskets, clamps, and complete mounting hardware Installation instructions available in the installation tab. ECS E46 330 LUFT-TECHNIK INTAKE SYSTEM

Take your driving experience up a notch with the ECS Luft-Technik Intake System! Designed to increase airflow and unlock captivating induction sounds, this intake system frees your engine from the restrictive stock intake box. Enjoy a noticeable boost in both performance and sound.

Benefits:

Significant Airflow Increase: 71 CFM gain over stock (27% increase). Enhanced Induction Noise: Adds a sporty, satisfying sound. Seamless Factory Integration: Retains stock MAF location and mounts to existing air induction track. Premium Design:

Wrinkle-Black Powder Coated Aluminum Tubing: Engineered from durable 6061 and 5052 aluminum. 7” Oiled Cotton Gauze Filter: Red filter maximizes air intake. Silicone Inlet Boot: Replaces failure-prone factory intake boot, providing smoother airflow and greater durability. Complete Kit Includes:

7” Oiled Filter (Red) Silicone Inlet Boot with improved flow characteristics Aluminum MAF Flange Mounting brackets, clamps, and all necessary hardware Turner Motorsport and ECS Tuning developed these products with precision, using FARO ARM laser scanning technology and CAD modeling for perfect fitment. Elevate your E46 with this exclusive package, and experience a total transformation in performance and sound!

Enhance your BMW's performance and sound with the Turner Motorsport N54 Valved Catback Exhaust. This exhaust system delivers a dual-purpose experience, offering a subdued note with the muffler valves closed, maintaining a near-factory sound. Open the valves with the included controller, and unleash a menacing growl, transforming your driving experience. Crafted with mandrel-bent dual 2.5" 304SS pipes and a high-flow valved stainless steel muffler, this system is a bolt-on replacement for the OE version, ensuring easy fitment with Accuseal slip-fit joints. Elevate your 335i's exhaust with the Turner Motorsport E9X 335i full exhaust system, available as Axle Back, Cat-back, or Turbo back.

Key Features:

• Dual 2.5" 304SS pipes with brushed finish
• Valved stainless steel muffler for dual-sound experience
• Accuseal slip-fit joints for easy fitment
• Turner Engraved Polished exhaust tips
• Utilizes factory exhaust hangers for straightforward installation

Kit Includes:

• Turner Mid Pipes for factory catted mid pipes
• Turner Valved Exhaust
• Muffler Valve Controller Kit
• Turner Engraved Exhaust Tips
• Gaskets and Nuts

E46 M3 Performance Valved Cat-Back Exhaust:

The wait is finally over, if you have been driving your E46 M3 around with a stock exhaust or are looking for your final exhaust setup we have you covered! Welcome to the world of ingenious designed exhausts that can meet your every driving need. Our new E46 M3 catback Exhaust is a stunning example of both engineering and art with sounds to please your ears and a sight to remember. Our catback is a lightweight and free-flowing exhaust that features two independent valved mufflers and a brilliant mounting system that is a pleasure to install and easy to perfectly dial in the exhaust fitment. Weighing 19lbs or less than your factory exhaust, featuring mufflers specifically designed for the S54 this exhaust is able to provide two completely different driving experiences.

With the exhaust valves closed the refined driving experience will blow your mind; while daily driving with closed valves there is a perfect bump in volume over the factory exhaust which allows you to hear and feel your rpms with a smooth exhaust note that shows your true passion for your iconic vehicle.

Now on to the real action, what you have always wanted but never wanted to commit to. Some days you just want to put the pedal to the floor with unlimited amounts of exhaust volume with your high revving 6 cylinder. Here is your opportunity to unleash the pure sound of your S54 while having the choice to change back to a respectable volumed exhaust. With the valves open this exhaust is an absolute symphony. Starting off from a stop with the valves open there is a significant increase in volume over the valves closed. When entering in to the 2000 rpm range you begin to experience the slightest taste of how satisfying the exhaust is going to sound. As you approach 4,000 rpms and higher you now have started to open up the can of worms, you can feel the free-flowing path of the exhaust with limited to no resistance, far superior to the factory exhaust. Anything after 6500 rpms is an absolute statement of exhaust. Over 6500 rpm is a sonorous note that lives rent free in the enthusiasts mind that can make a believer out of anyone who doubted the capable E46 M3. Once you are done having your fun and have experienced your S54 more than you ever have all you do is make one button click on your valve controller and you are back to high class and refinement. Truly the best of both worlds and a school girl giggling experience anytime you want.

Featured on the ECS YouTube Channel - CLICK HERE FOR SOUND CLIPS!

Features and Benefits:

19lbs or more weight savings from your factory exhaust
In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Retains factory emissions
Compatible with factory headers/front sections
Compatible with aftermarket headers/front sections that mate up to the factory rear section
Utilizes factory exhaust hangers
Adjustable fabricated sheet metal muffler brackets
Integrated x-pipe for improved exhaust note
Mandrel-bent dual 2.5" 304SS pipe
High flow dual valved, stainless steel mufflers
Vacuum actuated valves
Accuseal slip fit joints
All muffler exits are used for valves open and closed
2.5” Muffler exits for a variety of 3.5" tip options
Kit Contents:

E46 M3 mid section with integrated X-Pipe
Dual Turner S54 valved mufflers
Dual valve actuators and 2 remote key fobs
Exhaust Gaskets and Hardware
New center exhaust hangers
Optional Turner 3.5" Brushed or Chrome tips
Optional muffler hanger removal pliers
- Click HERE for Installation Instructions -

PRODUCT DEVELOPMENT:

Our Turner E46 Valved Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

E46 M3 Euro Style Carbon Front Lip:

Our unique and carefully designed front lip for the E46 M3 focuses on enhancing the car's aesthetics while preserving its natural beauty. This front lip is constructed of high-gloss, 3mm thick, 2x2 carbon fiber that adds a tasteful accent to the bumper while being strong and lightweight!

This aesthetic piece was crafted to stand out from other options available on the market by incorporating design elements that draw inspiration from the stock bumper but reimagines them in a way that sets it apart. Rather than overcomplicating the car's body styling, the goal was to seamlessly integrate the front lip with the existing design. This approach aims to enhance the car's body styling rather than overshadow it.

This versatile design is suited for both track use and everyday driving on the streets. Our E46 M3 front lip was designed to strike a balance between uniqueness and performance oriented aesthetics, while complementing the car's existing design. This is a clear cut choice front lip for someone looking to enhance the look of their M3.

Once you see your M3 with this front lip from, you will no longer think the front end is complete without it. Rounding out the near perfect car, this front lip completes the front end by filling out the open space underneath and sets the stage to enjoy the timeless body styling incorporating a curvature that compliments the front bumper.

Features & Benefits:

High-Gloss
Beautiful flowing carbon weave
Strong and lightweight
Updates the bumper with carbon appearance that enhances the existing body lines
Motorsport styling
Enhanced lowered appearance
Design:

CAD designed in-house for precision fitment
3mm 2x2 carbon fiber shell securely mounted at strong mounting points along the whole surface where the lip mates to the bumper
Front leading edge helps compliment and accentuate the forgotten body lines to add an aggressive yet subtle flare to the front end
Attaches to the front bumper with self tapping screws, plastic riv-nut and 6mm 3m adhesive tape to securely mount
Installation hardware included
Installation:

Mounts to the bumper using factory hardware combined with self tapping screws, plastic specific rivnut and hardware for securing the center posts. Requires drilling the underside of the bumper. Riv-nut installation tool included.

G42 M240 Performance Valved Cat-Back Exhaust

Unleash the true potential of your M240 with Turner Motorsport’s precision-engineered Cat-Back Exhaust, designed specifically for the B58 engine. From sound and style to pure performance, this exhaust system transforms your driving experience with an exhilarating soundtrack and unmistakable visual flair.

Engineered for performance, this exhaust system replaces the M240’s stock faux exhaust tips with striking quad 3.5" real tips. Made from premium 1.25mm T304 stainless steel, this cat-back exhaust offers superior durability, corrosion resistance, and a sleek look. Integrated valve control lets you adjust the exhaust tone to suit your driving mode, creating a refined, balanced note in comfort mode and an aggressive roar in sport mode. Turner’s unique muffler design maximizes flow when the valve is open, delivering pure, unrestrained sound and performance on demand.

Key Exhaust Features:

Authentic Quad Tips: Upgrade from the stock imitation tips to real, polished quad tips that bring motorsport aesthetics to your M240. Valve-Controlled Sound: The factory valve control allows for sound customization—subtle in comfort mode, powerful in sport mode. Durable Construction: Built from high-grade T304 stainless steel for maximum durability and resistance to the elements. Optimized Flow Design: True 3.0" piping from the downpipe to the muffler, designed without a resonator to keep exhaust flow unrestricted. Performance You Can Feel

Every aspect of the Turner cat-back exhaust is built with the driver in mind. The mandrel-bent, stainless steel piping ensures smooth airflow, while the strategically placed slip joints provide the perfect alignment and adjustability for a seamless, factory-like fit. The result? An unmistakable exhaust note and a substantial power boost.

What’s Included:

3.0" front exhaust section compatible with factory or aftermarket downpipes Lightweight, free-flowing midsection for maximum sound and performance gains Valved rear muffler for adjustable sound profiles Quad 3.5" optional exhaust tips for an aggressive rear profile Valve extension harness and all clamps/hardware for easy, bolt-on installation G42 M240i Aluminum Skid Plate

BMW’s newer high-powered engines, like the B58 and S58, require efficient cooling—but space constraints mean the oil cooler sits dangerously low and exposed. Protect this crucial component with Turner Motorsport’s heavy-duty skid plate. Constructed from 3/16" thick 5052 aluminum, this skid plate shields your oil cooler from debris and road impacts that could lead to severe engine damage. Unlike the factory plastic belly pan, Turner’s skid plate offers unmatched protection without compromising weight, aerodynamics, or cooling efficiency.

Designed to deflect debris while preserving airflow, this skid plate includes flared air channels to maintain cooling performance. It installs easily with factory hardware—no drilling or modification needed—and features a sleek black powder coat finish that’s both durable and stylish.

Skid Plate Benefits:

Enhanced Protection: Protects against rocks, debris, and other hazards that could damage your oil cooler. Factory-Compatible Installation: Bolts directly onto your car with no modification needed. Aerodynamic Design: Preserves factory aerodynamics with cooling vents for optimal airflow to the oil cooler. Durable Construction: Made from 5052 aluminum with a black powder-coated finish for superior strength and longevity. Equip your M240 with Turner Motorsport’s Cat-Back Exhaust and Aluminum Skid Plate and experience a new level of performance and protection—your BMW deserves nothing less!

B58 Performance Valved Catback Exhaust - F30, F32, F33, F36:

Still have the factory exhaust fitted to your B58? You don't know what your missing. Free up lost performance with a new full cat-back exhaust complete with factory valve control!

The B58 engine earned the badge "Worlds 10 Best Engines" four times as of 2023. In 2016 the single turbo straight six found its way to the leaderboards for the first time and followed up in 2017, 2019, and 2020 staying on the charts as one of the best engines in the WORLD.

Our new cat-back exhaust is designed to take out restrictions, maximize flow and give your B58 a signature exhaust note that will excite you on every drive. From the factory your vehicle comes equipped with a combination of three mufflers and resonators that do a great job of silencing the exhaust and restricting flow. There is a center muffler(one restriction), rear section resonator(two restrictions) and a bulky muffler(three restrictions!). With all of those stop gates how do you expect to get the maximum performance out of your vehicle, you simply cannot do so. Lucky for our in-house engineers you no longer have to deal with the quiet and limiting factory exhaust.

To create a cat-back exhaust for this incredible engine the changes happen right after the downpipe. We replaced the factory oval pipe with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Sound clips! Check out our Product Highlight on the ECS Tuning YouTube channel!

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout Full 3.0" Stainless Steel Mandrel Bent Tubing T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​ Strategically placed slip joints provide the most adjustability to obtain perfect fitment Features and Benefits:

Street/Motorsport inspiration Controlled by factory valves Compatible with factory and aftermarket downpipes (80mm) Reduction in back pressure for increased throttle response, TQ and HP Dual exit with fitted exhaust tips Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe) Full 3.0" light weight free-flowing middle muffler sections for better sound, performance and weight savings. Valved Rear muffler Valve extension harness Clamps and Hardware for an OEM+ install Turner Exhaust tips - 3.0" Inlet, 4.0" Outlet Product Development:

Our F Chassis B58 Valved Cat-back was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

B58 Engine Design:

BMW's first mass produced turbo charged engine, the N54 took the world by storm opening a whole can of worms in the car industry and aftermarket community. A new era of motors were created with the new B58 roughly 9 years after the N54 had been tested and pushed to its limits along with its single turbo companion, the N55. In 2015 the modular engine family was created and the B58 was released into the wild to set a new standard in performance and reliability. Turning back to their roots the B58 engine features a closed-deck engine design similar to the N54 that allows a massive increased in boost pressure capacity and heightened compression ratio. Thought the B58 is similar in weight and size to its predecessor, the new modular engine makes considerably more power right off the rip. With the new block design heat management has been upgraded to reduce the affects of heat cycling to slow the rate of cooling and prevent engine components from failing due to rapid cooling. Just like the N55 the B58 comes fitted with dual vanos, valvetronic and a single twin scroll turbo. Just 8 years experience of this motor we can all agree that the B58 looks like it could be the future of motors to come. This tunable engine has been tested up to 1000hp with the stock block and hosts a platform for the community to break into a whole new class of attainable "supercar killers".

Click HERE for Installation Instructions:

Turner Aluminum Charge Pipe - F3x B58:

- Click HERE for Installation Instructions -

The factory B58 charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power.

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. You can also safely turn up the boost on your B58 once this kit is installed, and not worry about the problematic factory piece.

Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for!

Design Features and Benefits:

The upper pipe is constructed from 6063 aluminum for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment.

Billet CNC throttle body flange for OEM fitment.

Black powder coated for exceptional durability and corrosion resistance.

Lower pipe is constructed of 4-ply reinforced silicone hose and a 6061-T6 black anodized aluminum coupler to retain factory fitment to the turbo.

Silicone provides a smooth transition from turbo outlet to the upper aluminum pipe. The silicone also provides good wear resistance wear the charge pipe is in close contact with the turbo inlet and coolant hoses.

Get rid of your heavy and restrictive factory exhaust and upgrade to a lightweight free-flowing performance exhaust!

If you are looking for the perfect combination of sound, quality and pricing, this is exactly the exhaust you are looking for. Its time to upgrade from your old and blocked up factory exhaust or the leaky exhaust that was welded up by the owner before you. Your going to love the new sound of your N52 with our new Axle Back Exhaust! The tone and character of this exhaust was designed with the true enthusiast in mind.

This simple yet effective axle back turns your N52 from boring, into a recognized sports car. N52 cars have fantastic styling and can be fitted with exterior mods such as wheels, coil overs, carbon, the works. With such a great looking chassis you need a great sounding exhaust. With not only performance but sound in mind; this exhaust features a deeper tone with added volume to get a sound that will impress your fellow enthusiasts.

Our Turner N52 exhaust slips over your factory exhaust right after the secondary cats to keep your car in full compliance with emissions. After your secondary cats the exhaust feeds into a single 3" exhaust pipe which replaces the factory resonator for the best flow and transformation of sound. The large 3" diameter exhaust flows into a full 3" muffler that was designed in-house for the best performance and dampening to achieve the great tone from your N52. In order to compensate for the factory oversized muffler and resonator, this muffler was designed to provide a specific frequency and output that Turner was looking for.

Features and Benefits:

Deeper tone with added volume
Increased flow and performance
In-house designed and tested
100% hand-Tig welded at all joints
Direct fit hanger locations
Attaches to your factory exhaust pipe diameter
Optional tips for your preferred aesthetic
Accuseal clamps for ease of install
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
2.5"-3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Designed for smoother flow path and less backpressure
KIT Includes:

Axle Back Exhaust
Dual 3.0" exhaust tips (select your finish)
Stainless steel accuseal exhaust clamps
Optional exhaust pipe cutter and muffler hanger tools for a DIY
PRODUCT DEVELOPMENT

Our Turner N52 Axle Back was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Unlock the true potential of your B58 while retaining the functionality of the factory valved rear muffler. Our Turner Motorsport Center Muffler Delete replaces the restrictive OEM midsection with high-flow, TIG-welded 304 stainless steel tubing, improving both exhaust flow and acoustic character.

This direct-fit upgrade removes the factory resonator and center muffler, reducing system weight by approximately 5 lbs and eliminating built-in restrictions that limit performance. The result is a deeper, more aggressive exhaust tone with enhanced burbles, delivered without unwanted drone.

Design:

1.25mm wall brushed 304 stainless steel tubing, TIG-welded for durability
Single 80mm pipe transitioning into dual 70mm outlets
~5 lbs lighter than stock by eliminating the bulky resonator and muffler
Bolts to the factory downpipe and valved muffler using OEM-style clamps
Slip joints and 304 stainless Accuseal clamps allow fine alignment
Uses OEM hanger locations and attaches at designated cut points for ease of install and potential reversibility
Routes around OEM chassis braces with proper spacing
Kit Contents:

Front exhaust section
Mid-pipe exhaust section
OEM-style downpipe clamp
Rear sleeve clamp
Engineered for enthusiasts who want more sound, less restriction, and uncompromised fitment, this resonator delete delivers a refined yet aggressive exhaust character while letting your B58 breathe more freely.

Installation and Support:

Installation is as easy as cutting, placing into position, and clamping!
Tools you might want for the job:
Exhaust hanger removal pliers - T379176
Exhaust pipe cutter - T38545
Product Development:

Our Turner center resonator delete was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Our Race Inspired exhaust deletes the rear mufflers in the F10 M5 to allow more of the exhaust sound to be heard. We love our M5 but it's just too quiet so we looked at ways to get more of the stock exhaust to be heard. After evaluating the stock exhaust layout it was easy to see that removing the rear mufflers would accomplish what we wanted. But cutting the mufflers off is just the beginning. We then had to develop a set of pipes and design a set of tips that fit perfectly and also looked right at home on the M5 super sedan. And these M5 muffler delete pipes are the finished product.

Our axle-back exhaust is made from a 304 stainless steel tube in the same diameter as the stock exhaust and with mandrel bends for unimpeded flow. It fits with the stock hangers and is clamped to the stock exhaust pipes once the mufflers are cut off. And the entire installation can be done in about an hour with the exhaust on the car. With factory clamps, you can easily reinstall your stock mufflers or a set of Corsa Performance mufflers at any time. Our tips are also stainless in a perfectly proportioned 89mm (3.5" diameter). They fill out the rear bumper valence perfectly - not too small like stock and not boy-racer large. Tips are available in mirror silver or brushed aluminum..

The final result is that removing the stock mufflers really lets the M5 V8 sing! With the mufflers and flapper valves removed the sound on start-up is scintillating. The sound from the S63TU engine is robust and intoxicating - it just needs to be heard! From outside, the muffler-delete exhaust makes the car seem all the more impressive. From the burble at idle to the roar under full throttle there is little doubt that this is a proper M car. Inside the car during normal driving the sound is not changed much thanks to the Active Sound Design system. It's a little louder but not intrusive or irritating. Around town the car sounds much like stock but just a touch louder. The exhaust pops and burbles more with each downshift. On the highway at 70-80 cruising speeds it's as quiet as a muffled exhaust. We tried to get the exhaust to drone but only experienced it at low speeds in a high gear (i.e. - lugging the engine) which we normally wouldn't do.

Our Race Inspired M5 exhaust is perfect for enhancing and accentuating the stock sound. It lets more of the M5's soundtrack come through without extensive exhaust modifications. If you want to enjoy the M5's sound more, think of this as its volume knob turned up.

This item fits the following BMWs:
2012+ F10 BMW M5

Drop 10 lbs and replace your midpipes/resonator for a free flowing X-Pipe to get a smoother sound and decreased back pressure!

An X-Pipe can do wonders for your engine for performance and sound. Exhaust gasses come out of your motor in pulses from each individual cylinder, with a cross-over or x-pipe the exhaust gasses meet in the middle and combine. The result of the combining gasses is a smoother path leading to lower amounts of back pressure, a more free-flowing exhaust and leads to increase power and response. Combine with a new rear muffler for best results!

BMW's straight six motors have been referred to as sounding like chain-saws, and being "raspy" or "metallic". Transform your exhaust with our mid section exhaust with an integrated x-pipe to smooth out your exhaust tone and enjoy the sound of your M54! The mid section x-pipe comes with new hardware for connection to the downpipes and includes superior exhaust sleeves to slide over your factory rear section.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
2.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Flanges to mate up to your factory downpipes
10 lb weight reduction from factory midpipes
Designed for smoother flow path and less backpressure
Kit Contents:

E46 325/330 Mid Section With Integrated X Pipe
New downpipe hardware to replace your seized exhaust studs
2 Dual Clamps Exhaust Sleeves for easy installation to your factory exhaust

Presenting our Turner Motorsport Performance Cat-Back Exhaust, tailor-made for your 4-cylinder F Chassis. Immerse yourself in an enhanced driving adventure as this meticulously engineered exhaust takes your B48-equipped car to exhilarating new heights. With an unwavering commitment to performance and quality, the Turner exhaust is crafted to unlock the full potential of your F chassis.

Experience a symphony of performance and sound, coupled with a visual upgrade through the quad exit exhaust tips that amplify the motorsport essence of your vehicle. Elevate your driving encounters with the Turner Motorsport axle-back exhaust - unleash the power, reveal the glorious sound, and capture attention wherever you go.

Incorporating their distinctive design principles, this exhaust produces a commanding, deep tone, revealing the bold personality of the revolutionary line of 4-cylinder turbo engines. Leveraging the factory valve control, the Turner axle-back ensures an exciting sound during acceleration, seamlessly blending the high-performance sound with daily driving convenience. Crafted from 1.25mm wall T304 stainless steel, Turner's exhaust boasts superior durability, corrosion resistance, and aesthetic appeal.

Designed with the customer in mind, the installation is a breeze, featuring a straight-forward slip joint and mounting locations. Your exhaust system includes all the necessary clamps and hardware for a hassle-free installation. Upgrade your f chassis with the Turner Motorsport axle-back and let every drive become a statement of power and style.

Upgrading the sound:

This exhaust allows you to turn up the volume and let the 4 cylinder boast its smooth and hearty exhaust tone. Let's be honest, what's the point of owning a f chassis if you're not going to upgrade the exhaust? Turner's signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of B48 sound!

Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Pronounced dual 3.0" Exhaust tip options
Kit Contents:​

Valved rear muffler
Valve extension harness
Clamps and hardware for installation
Single to dual 3.0" exhaust tips
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Slip joints provide the most adjustability to obtain perfect fitment

- Click HERE for Installation Instructions -

Drop a gear and disappear! Your going to love the new sound of your N52 with this Turner Motorsport Muffler & Resonator Delete. Forget buying a whole new exhaust, with just this kit your exhaust will be completely transformed. Not only do you get performance gains and beautiful new tips to show off, the best part is you can do the delete on your own with just hand tools!

Turner Motorsport E9x N52 Muffler & Resonator Delete removes the heavy, restrictive factory muffler and replaces it with a lighter weight, high flow, T304 stainless steel 3.0" exhaust tubing. This exhaust adds a louder exhaust note in a simple, cost effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. Turner's Muffler Delete creates a noticeable increase in exhaust sound, without adding significant drone at cruising speeds. As an added bonus, this Turner Motorsport muffler delete shaves off about 20lbs, weighing in at only 22lbs. OEM units out of a 325/328 weight in at 44lbs, and the 330 is 41lbs.

Sound clips! Hear this exhaust in action:

Features:

Turner designed rear Muffler & Resonator Delete - made of T304 stainless steel, 1.25mm wall thickness, CNC mandrel bent 3.0" tubing for straight-through exhaust gas routing
Tig-welded exhaust hangers that fit into the factory location for direct fitment
100% hand-Tig welded at all joints
Stainless steel Accuseal exhaust clamps are included for a leak-proof seal
Large radius bends throughout provide smooth transitions for the best flow possible

KIT Includes:

Y-pipe section
Tailpipe section
Dual 3.0" exhaust tips (select your finish)
Stainless steel accuseal exhaust clamps
Optional exhaust pipe cutter and muffler hanger tools for a DIY