Water/Methanol and Nitrous Oxide

AEM Water/Methanol Injection System

T#:20815164

Part#: 30-3326

In Stock at Vendor

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Direct Port Water Methanol 4 Cylinder Upgrade - Red Line

T#:583755

Part#: SNO-94500-RED

In Stock at Vendor

$ 208.99 USD

Add to Wish List

Qty

$ 208.99 USD

Add to Wish List

4 Cylinder Direct Port Water Methanol Upgrade - Red Line is designed for BMW vehicles running high horsepower applications that rely on water-methanol tuning. This upgrade by Snow Performance allows for precise water-methanol injection with direct port mounting into each cylinder, enhancing performance and reliability.

Direct Port Injection: Enables direct mounting of water-methanol nozzles into each cylinder for optimized performance.
Comprehensive Kit: Includes Snow Performance 4 CYL Direct Port Distribution Block, 11 push lock fittings, a POWER solenoid upgrade, 4 nozzle holder/check valve combos, and 11 feet of high-temp nylon tubing.
High-Quality Components: All parts are engineered for durability and reliability, meeting high-performance standards.
Enhanced Tuning: Provides improved tuning capabilities and consistent performance for high HP applications.
Note: Nozzles are not included and must be purchased separately.

Upgrade your BMW with the 4 Cylinder Direct Port Water Methanol Upgrade - Red Line from Snow Performance for superior engine performance and reliability.

Show More Show Less

F9x M5/M8 WMI Nozzle Adapters

T#:21176941

Part#: BMS-WMI-F9XAD

Ships on Sep 14, 2026

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

These plug and play WMI nozzle adapters allow you to cleanly install a WMI kit on your F9x BMW M5/M8 without having to disassemble or drill/tap the factory charge pipes. They retain the factory boost cross over and include all required hardware. Does not include WMI nozzles. Made in the USA.

Show More Show Less

BMS Water/Methanol Injection (WMI) Kit - Gen 2 B58

T#:21308437

Part#: WMIK-B58G2

Ships on Sep 14, 2026

Starting at $ 799.00 USD

Add to Wish List

Starting at $ 799.00 USD

Add to Wish List

Make tremendous amounts of power on pump gas! Everything you need to get started with WMI in one convenient kit. JB4 compatible! Water/Methanol/Alcohol injection commonly referred to as WMI allows you to make tremendous amounts of power on pump gas. The effect is similar to running 100 octane race gas or E85 fuel all the time with the additional cooling benefits allowing for more power than you can make on race gas or E85 alone. For those that don't have easy E85 access WMI adds a on of power over pump gas, and for those running E85 WMI can still be very useful for its charge air cooling and fuel volume benefits. The key to a safe and effective WMI setup is tuning integration. The B58 BMS WMI kit integrates to the JB4 tuning system allowing for precise mapping based on boost, throttle position, engine speed, intake temperature, advance, gear, and other data elements available to the JB4 through its CANbus system. In addition, a pump flow signal is fed back to the JB4 allowing for a safe and smooth progressive boost mapping. If the tank runs empty or flow drops for any reason the JB4 will safely back down performance to avoid detonation. Boost is held low until WMI is properly flowing to avoid tip in knock common with non-integrated WMI setups. In addition WMI can be activated or disabled right from the JB4 Mobile app and will automatically disengage during traction control or safety map situations. WMI flow data can be displayed via your JB4 Mobile logging device. This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap, a compression pump feed fitting, and 12" of vinyl WMI line for the non-pressure side of the WMI pump. This kit includes a BM10 (10 GPH or approx. 750 ml/min) injection nozzle suitable for most B58 applications. Mounting requires an 1/8" NPT port or the throttle plate adapter. What's included (1) G20 Stealth Tank and Mounting Hardware (1) FSB JB4 Water/Methanol Injection Controller (1) BMS water/methanol Injection pump (1) BM10 Water/Methanol Nozzle (1) 12.5' of steel braided hose (straight and 90º fitting) (1) 2' of steel braided hose (straight and 90º fitting) (1) 18" of PTFE line (tank to pump) (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Solenoid (1) 15' (-) Negative black wire (1) 15' (+) Positive red wire (7) wire wire nuts (1) inline fuse holder

Show More Show Less

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Sep 14, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

2.5 Gal. Water-Methanol Tank Upgrade - Quick-Connect Fittings ...

T#:598939

Part#: SNO-40014

In Stock at Vendor

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

Billet Water/Methanol Injection (WMI) Spacer - Gen 2 B58

T#:20782258

Part#: BMSB58WMISPG2

Ships on Sep 14, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Normally you'd replace the factory charge pipe to install a water/methanol kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug and play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/methanol applications we suggest dual CM5 nozzles.

Show More Show Less

Water/Methanol Port Injection Kit - S58

T#:21209840

Part#: BMS-MPIKS58

Ships on Sep 14, 2026

Starting at $ 1,699.00 USD

Add to Wish List

Starting at $ 1,699.00 USD

Add to Wish List

Make tremendous amounts of power on pump gas! The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends. This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions. The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve available as well. Throw in a jug of boost juice to get on your way to power! Features & Benefits Included tank leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank Includes 2-way vented black plastic cap Includes all mounting hardware What's included: (1) Fuel-It! S58 Billet Fuel Rail (6) 550cc Fuel Injectors (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing (1) BMS Water/Methanol Pump (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) -6AN ORB fitting (1) -6AN ORB plug (2) 1/8" NPT plugs (3) 14 x 1 Stainless steel screws to secure the rail to your manifold (1) Injector installation jig (1) 8 x 3/4" screw for the installation jig (1) 21/64 drill bit to open the factory injector bosses (1) Superlube® (1) BMS JB4 Port Injection Controller (7) Wire nuts (1) inline fuse holder (1) 12V Relay(1) 15' of red power wire (1) 15' of black power wire (1) 3.5 Gallon Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of 1/4" nylon meth line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

Snow Performance 1/8NPT-1/4 Quick Connect Fitting

T#:2317850

Part#: SNO-82082R

In Stock at Vendor

23% off MSRP $ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD

Add to Wish List

Qty

23% off MSRP

$ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD

Add to Wish List

2 Gallon Stealth Tank F10

T#:558168

Part#: 2G-STMT-F10

Ships on Sep 14, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

A clean, stealth installation providing peace of mind and making no compromises. This completely custom design fits cleanly within the existing trunk cavity in your F10 BMW for the ultimate ease of installation. The Water/Methanol Injection (WMI) pump mounts directly to the bottom of the tank allowing for a quick and clean installation. The bottom of the tank includes a sump and baffle allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, (ES4714530) Burger Motorsports DDP 5800 water methanol alcohol Injection pump (ES4714532) Features & Benefits Pump mounts directly to the tank Works with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Bolts to an existing point in the vehicle Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 16.5" x W 6.5" x H 8.25"

Show More Show Less

BMS Water/Methanol Port Injection (WMI) Kit - S58

T#:21308440

Part#: WMIK-S58

Ships on Sep 14, 2026

Starting at $ 1,899.00 USD

Add to Wish List

Starting at $ 1,899.00 USD

Add to Wish List

The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends. This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions. The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Features & Benefits Included tank leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank Includes 2-way vented black plastic cap Includes all mounting hardware What's included: (1) Fuel-It! S58 Billet Fuel Rail (6) 550cc Fuel Injectors (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing (1) BMS Water/Methanol Pump (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) -6AN ORB fitting (1) -6AN ORB plug (2) 1/8" NPT plugs (3) 14 x 1 Stainless steel screws to secure the rail to your manifold (1) Injector installation jig (1) 8 x 3/4" screw for the installation jig (1) 21/64 drill bit to open the factory injector bosses (1) Superlube® (1) BMS JB4 Port Injection Controller (7) Wire nuts (1) inline fuse holder (1) 12V Relay (1) 15' of red power wire (1) 15' of black power wire 3.5 Gallon Tank: What's included: (1) 3.5 Gallon Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of 1/4" nylon meth line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

3GPH Water-Methanol Nozzle

T#:21374115

Part#: SNO-N0300

Ships on Sep 14, 2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Active Autowerke Methanol Injection System - E46

T#:397237

Part#: 14-003

Ships in 3 Business Days

$ 2,137.00 USD

Add to Wish List

Qty

$ 2,137.00 USD

Add to Wish List

Turbo vehicles often suffer from heat soak - methanol injection systems help cool the intake charge, and increases your engine’s knock limit – giving you a failsafe against high boost detonation. Active Autowerke's methanol-water is precisely delivered and metered by its own electronic module, which measures boost pressure within the engine and controls the delivery flow to match both the engine load and demand as needed.

The large 1.8+ gallon reservoir
Rigid mount can be easily detached if needed by its spring loaded quick releases.
For offroad use only.
Does not include any fluid.

This methanol injection system fits the following BMWs:
1998-2006 E46 320i 323i 325i 325xi 330i 330xi 323ci 325ci 330ci M3

Show More Show Less

Water/Methanol (WMI) Direct Port Injection Plate Only - N54/N55/S55 ...

T#:21308460

Part#: 40069

Ships in 1 Business Day

$ 309.99 USD

Add to Wish List

Qty

$ 309.99 USD

Add to Wish List

Direct port injection plate for clean WMI installs Snow Performance Direct Port Injection Plates are an easy, clean way to install a high performance water/methanol system. Add it to your existing system WMI system for a boost in capability and reliability, or build your system around it. Includes: 3.0 N54/N55 Direct Port Injection Plate O-Rings for seal between Injection Plate and head. Required Hardware for Installation Instructions for fitment on N54/N55/S55 style engines. *Will need to buy nozzles, lines and distribution block* *Note- For safety, a solenoid must be used when injecting post throttle body to prevent vacuum siphoning

Show More Show Less

Nozzle Holder Straight (Rectangle Style)

T#:21308474

Part#: SNO-900

Ships in 1 Business Day

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Straight, rectangular single nozzle holder. 1/8" NPT.

4AN "T" Fitting

T#:21374143

Part#: SNO-806-BRD

In Stock at Vendor

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

WMI Inline Filter

T#:21176933

Part#: BMS-WMI-FIL

Ships on Sep 14, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

Water/Methanol Nozzle - 2.5GPH

T#:21374122

Part#: SNO-N0250

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Snow Performance 7 Gallon Reservoir (incl. brackets/check valve/tubin...

T#:21374142

Part#: 40016

In Stock at Vendor

28% off MSRP $ 218.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 156.99 USD

Add to Wish List

Qty

28% off MSRP

$ 218.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 156.99 USD

Add to Wish List

Stage 3 Boost Cooler (EFI - Port Injection) - Nylon Line

T#:21374154

Part#: SNO-310

In Stock at Vendor

$ 729.99 USD

Add to Wish List

Qty

$ 729.99 USD

Add to Wish List

FSB WMI Controller - v1 N54 JB4

T#:21176922

Part#: FSB-N54

Ships on Sep 14, 2026

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

The BMS JB4 FSB Water/Methanol Injection (WMI) controller allows the JB4 to control your WMI pump and solenoid for dynamic progressive flow mapping. It also allows the JB4 to monitor pump current to overlay it with CANbus feedback for tuning parameters such as fuel trims and fuel pressure to provide a comprehensive flow-based safety system.

Show More Show Less

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

T#:3047546

Part#: SNO-211

In Stock at Vendor

$ 702.99 USD

Add to Wish List

Qty

$ 702.99 USD

Add to Wish List

Snow Performance Water Tank Upgrade - 7gal

T#:21308472

Part#: SNO-40016-BRD

Ships in 1 Business Day

$ 260.99 USD

Add to Wish List

Qty

$ 260.99 USD

Add to Wish List

7 gal. water-methanol tank upgrade braided stainless line (w/brackets, solenoid, hose & all necessary fittings) (15lx17hx9w)

Snow Performance Methanol Injection Ring - All BMW

T#:589571

Part#: SNO-40111.40112

Ships in 1 Business Day

Starting at $ 359.98 USD

Add to Wish List

Starting at $ 359.98 USD

Add to Wish List

Choose either V-band or hose camp style rings to add methanol injection easily to almost any vehicle.

Boost Cooler Stage 2.5 Progressive Water/Methanol Injection Kit - no ...

T#:21374113

Part#: SNO-210-BRD-T

In Stock at Vendor

$ 687.99 USD

Add to Wish List

Qty

$ 687.99 USD

Add to Wish List

BMS 3.5 Gallon Stealth Water/Methanol Injection (WMI) Tank

T#:20815187

Part#: BMW35G28

Ships on Sep 14, 2026

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

Safe, sleek, and ready to install out of the box! Your choice of color and accessories! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Burger Motorsports DDP 5800 water methanol alcohol Injection pump (ES4714532) Features & Benefits Leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank (pump sold separately) Tank dimensions: L 20.5" x W 11" X H 13.5" What's included: (1) Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (2) 1/4 push male to female 90º to pump in (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

Water Injection 26.5l Trunk Mounting Kit - ProLine

T#:37892117

Part#: SP30121PRO

Special Order: No Guaranteed ETA

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

5' Stainless Steel EPDM Braided Water Methanol Line

T#:28836419

Part#: SNO-800-BRD

Special Order: No Guaranteed ETA

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Union Tee

T#:640585

Part#: 82040

Special Order: No Guaranteed ETA

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Super Atomizing Water/Methanol Injection Nozzles

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Sep 25, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less