Find Parts That Fit Your Vehicle

BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

KW Suspension - Corporate Logo
T#:361415
Part#: 18020032
Back Ordered
$ 2,414.00 USD
Free Shipping
$ 2,414.00 USD
Free Shipping

Adjustable Rebound Damping, Sport Comfort Springs

Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads.

KW street comfort – The most individual sport suspension with maximum comfort

With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.

  • Maximum driving comfort for a perfect performance and more driving pleasure
  • Guarantees more comfort, flexibility and sportive as regular OE sport suspensions
  • Comfortable adjustment
  • Spring Rate; Front 286 lbs/inch, Rear 572 lbs/inch
  • Better handling due to less body roll
  • TUV approved lowering range
  • Individually height-adjustable - Front - 15-35mm, Rear - 10-30mm
  • Trapezoid thread for a easy height adjustability
  • High quality damper components for long durability
  • Adjustable rebound damping
  • Complete detailed documentation for easy use


FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2006-2012 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2013 E92 BMW 328i 335i 335is - Coupe

Show More Show Less
KW Suspension - Corporate Logo
T#:341736
Part#: 180200AD
Back Ordered
$ 2,764.00 USD
Free Shipping
$ 2,764.00 USD
Free Shipping
KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable - Front - 10-40mm, Rear - 20-40mm Trapezoid thread for a easy height adjustability High quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
Show More Show Less
KW Suspension - Corporate Logo
T#:348940
Part#: 1022000D
Back Ordered
$ 2,094.00 USD
Free Shipping
$ 2,094.00 USD
Free Shipping
Factory Pre-set Damping

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a BMW owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+
  • Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:638037
    Part#: 1820220857
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping
    After the success of ST's XTA line of coilovers, it's no wonder ST decided to take things a step further with their all-new XTA Plus 3 coilovers. These new coilovers take many of the great features of the XTA line and integrated them in a package with significantly more control, allowing you to individually adjust 3 dampening settings, including High-Speed Compression, Low-Speed Compression, and Rebound dampening. This makes dialing in your preferred tack settings a breeze and allows for fine-tuned adjustment to suit any track conditions and racing styles! As an added bonus, this means even major vehicle modifications (such as heavy roll cages, bushing changes, altered wheel loads) can be taken into account when adjusting your coilovers to help you further maintain similar optimal handling characteristics. Features: Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Individual lowering within the tested adjustment range Front and rear axle (when possible) with thread adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection Aluminum adjustable uniball top mounts (when possible) Scaled camber adjustment (when possible) 3-way adjustable dampers: 18 clicks low-speed rebound damping 24 clicks low-speed compression damping 24 clicks high-speed compression damping Lowering Specifications: Front: 0.4-1.6" Rear: 0.2-1.4"
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11636
    Part#: 35220024
    Back Ordered
    $ 3,094.00 USD
    Free Shipping
    $ 3,094.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    State-of-the-art technology from motor sports for more performance on the road for your E46 3 series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
  • Individually adjustable rebound and compression
  • Infinitely variable rebound damping adjustment
  • 14-way adjustable compression damping
  • Unique, individually working damping force adjustment
  • Stainless steel technology "inox-line"
  • Individually height-adjustable - Front - 35-65mm, Rear - 35-65mm
  • TUV approved lowering range
  • High-quality component parts for long durability.



    This item fits the following BMWs:
    2001-2005 E46 BMW 325xi 330xi
  • Show More Show Less
    BC Racing - Corporate Logo
    T#:4333544
    Part#: I-03-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less

    BC Racing - Corporate Logo
    T#:4347101
    Part#: I-80-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:206137
    Part#: 39020015
    Back Ordered
    $ 4,964.00 USD
    Free Shipping
    $ 4,964.00 USD
    Free Shipping
    Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.0 - 2.0" Rear:1.2 - 2.1"
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:582610
    Part#: 15220042KT
    Back Ordered
    $ 2,154.00 USD
    Free Shipping
    $ 2,154.00 USD
    Free Shipping
    With adjustable rebound damping, you can dial in the exact response, feedback, and cornering stability you need to give your car a real competitive edge whether you're carving up back roads or hunting down lap times.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11615
    Part#: 18020033
    Back Ordered
    $ 2,414.00 USD
    Free Shipping
    $ 2,414.00 USD
    Free Shipping
    Adjustable Rebound Damping, Sport Comfort Springs

    Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads.

    KW street comfort � The most individual sport suspension with maximum comfort

    With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.

  • Maximum driving comfort for a perfect performance and more driving pleasure
  • Guarantees more comfort, flexibility and sportive as regular OE sport suspensions
  • Comfortable adjustment
  • Spring Rate; Front 286 lbs/inch, Rear 572 lbs/inch
  • Better handling due to less body roll
  • TUV approved lowering range
  • Individually height-adjustable - Front - 15-35mm, Rear - 10-30mm
  • Trapezoid thread for a easy height adjustability
  • High quality damper components for long durability
  • Adjustable rebound damping
  • Complete detailed documentation for easy use
    When using original tires, wheel spacers may be required



    This item fits the following BMWs:
    2006-2012 E91 BMW 328i Wagon
    2007-2013 E93 BMW 328i 335i - Convertible
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:5282899
    Part#: 352200DK
    Back Ordered
    $ 3,474.00 USD
    Free Shipping
    $ 3,474.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use
    Show More Show Less
    BC Racing - Corporate Logo
    T#:598289
    Part#: I-34-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:349082
    Part#: 352208AK
    Back Ordered
    $ 4,584.00 USD
    Free Shipping
    $ 4,584.00 USD
    Free Shipping
    KW Clubsport coilovers were developed for customers who demand a better handling car when participating in track day events, but also require a setup that could be used on the street. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. These adjustment options, combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport Coilovers meet every demand regarding a coilover for the usage on the road and the race track.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:349022
    Part#: 1022000R
    Back Ordered
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F30/F32 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive - Sedan
    2013+ F32 BMW 428i xDrive Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:361870
    Part#: 15220080
    Back Ordered
    $ 2,834.00 USD
    Free Shipping
    $ 2,834.00 USD
    Free Shipping

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Not for cars with the factory EDC system. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i without EDC
    2009+ F01 BMW 740i 740li 750i 750li 
    Not for cars with Adaptive Drive.

    Show More Show Less

    BC Racing - Corporate Logo
    T#:4319921
    Part#: I-01-HM
    Back Ordered
    $ 2,535.00 USD
    Free Shipping
    $ 2,535.00 USD
    Free Shipping
    BC Racing's HM Coilover system offers the same great benefits of the RM Series with the addition of 2 way damping adjustment. Each HM Coilover system features inverted mono-tube dampers with independently adjustable compression and rebound. The inverted damper design moves vital damper fluid away from detrimental heat sources to avoid overheating which can cause damper fade under extreme track use. Know your safe from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Engineered for 100% track use * 30 levels of separate rebound and compression adjustment * Inverted damper design (depending on models) * Dual Piston design (1 res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:176983
    Part#: 39020017
    Back Ordered
    $ 4,964.00 USD
    Free Shipping
    $ 4,964.00 USD
    Free Shipping
    Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.6 - 2.5" Rear: 1.2 - 2.4"
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:341734
    Part#: 1802000T
    Back Ordered
    $ 2,764.00 USD
    Free Shipping
    $ 2,764.00 USD
    Free Shipping
    Adjustable Rebound Damping, Sport Comfort Springs Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit, a lowering of 10-40mm can be realized depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time, the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product, KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility, and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable Trapezoid thread for an easy height adjustability High-quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:361438
    Part#: 35220053
    Back Ordered
    $ 3,644.00 USD
    Free Shipping
    $ 3,644.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    State-of-the-art technology from motor sports for more performance on the road for your E53 X5 3.0i 4.4i 4.6is or 4.8is. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

    • Individually adjustable rebound and compression
    • Infinitely variable rebound damping adjustment
    • 14-way adjustable compression damping
    • Unique, individually working damping force adjustment
    • Stainless steel technology "inox-line"
    • Individually height-adjustable - Front - 35-65mm, Rear - 35-65mm
    • TUV approved lowering range
    • High-quality component parts for long durability

    Not for cars with Self Leveling Suspension.

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:349088
    Part#: 3972020E
    Back Ordered
    $ 7,054.00 USD
    Free Shipping
    $ 7,054.00 USD
    Free Shipping
    KW Clubsport coilovers were developed for customers who demand a better handling car when participating in track day events, but also require a setup that could be used on the street. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. These adjustment options, combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport Coilovers meet every demand regarding a coilover for the usage on the road and the race track.
    Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:4319900
    Part#: 18202208AG
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping

    KW Suspension - Corporate Logo
    T#:50731706
    Part#: 10220029-B
    Back Ordered
    $ 1,854.00 USD
    Free Shipping
    $ 1,854.00 USD
    Free Shipping
    The ideal choice for drivers who want to lower their vehicle without the guesswork.
    KW Suspension - Corporate Logo
    T#:2498436
    Part#: 352200DT
    Back Ordered
    $ 3,294.00 USD
    Free Shipping
    $ 3,294.00 USD
    Free Shipping


    KW Suspension - Corporate Logo
    T#:11678
    Part#: 35220811
    Back Ordered
    $ 4,094.00 USD
    Free Shipping
    $ 4,094.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs

    KW Clubsport coilovers was developed for E36 3 Series owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 40-80mm, Rear - 30-60mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 685 lbs/inch, Rear - progressive.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment note: wheel spacers may be required depending on wheel sizing and offset.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:206109
    Part#: 1522000Z
    Back Ordered
    $ 2,684.00 USD
    Free Shipping
    $ 2,684.00 USD
    Free Shipping
    Adjustable Rebound Damping The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including - Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable Front Lowering:1.2" to 2.0" Rear Lowering:1.2" to 2.4" TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. Coilover suspensions are better-engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Lifetime warranty!
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11655
    Part#: 35220066
    Back Ordered
    $ 4,034.00 USD
    Free Shipping
    $ 4,034.00 USD
    Free Shipping
    E65 (765); all models (bundle incl. EDC delete unit) KW Coilover Kit V3

    KW Suspension - Corporate Logo
    T#:180871
    Part#: 35220100
    Back Ordered
    $ 4,154.00 USD
    Free Shipping
    $ 4,154.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - Separate adjustments for compression (14 positions) and rebound (infinite settings), Stiffer springs over stock for less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering, TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. This kit is intended for cars that came with the factory EDC suspension and includes the KW EDC Cancellation Kit. Lifetime warranty! This item fits the following BMWs: 2012+ F13 BMW 640i 650i - Coupe ONLY for cars with Adaptive Drive and EDC.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:363864
    Part#: 152200AC
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning the company consisted of only three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361382
    Part#: 10220016
    Back Ordered
    $ 1,814.00 USD
    Free Shipping
    $ 1,814.00 USD
    Free Shipping

    Factory Pre-set Damping 

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 35-70mm lowering; Rear = 30-60mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for a Z3 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50830335
    Part#: 352082000G
    Back Ordered
    $ 3,644.00 USD
    Free Shipping
    $ 3,644.00 USD
    Free Shipping
    Designed for drivers who prioritize chassis stability and steering response over aggressive lowering.
    BC Racing - Corporate Logo
    T#:4333551
    Part#: I-14-ER-O
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less

    BC Racing - Corporate Logo
    T#:4333511
    Part#: I-01-ZR
    Back Ordered
    $ 2,835.00 USD
    Free Shipping
    $ 2,835.00 USD
    Free Shipping
    BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:206107
    Part#: 1022000H
    Back Ordered
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F33 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2013+ F33 BMW 428i Convertible
    2014+ F36 BMW 428i Gran Coupe
  • Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:379418
    Part#: 90609
    Back Ordered
    $ 1,229.00 USD
    Free Shipping
    $ 1,229.00 USD
    Free Shipping
    Need to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions. Height adjustable with average lowering of Front: 1.4" to 2.6" & Rear: 1.2" to 2.4" Features include: Galvanized coilover struts with additional coating for optimized corrosion protection Complete solution with adjustable spring plate, race spring system and bumpers with dust protection Powerful twin-tube dampers with high-quality components for maximum longevity 5 year limited warranty
    Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:5376294
    Part#: 182200BN
    Back Ordered
    $ 1,399.00 USD
    Free Shipping
    $ 1,399.00 USD
    Free Shipping
    With the adjustable dampers, you can influence more than just the ride height of your car. Whether your style is comfort or performance, with the ST XA Coilover you are in control of your driving dynamics. For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustments. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST manufactures the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material, corrosion is prevented between the strut and perch ensuring long-lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to ST's factory-recommended damper settings, the same configuration tested on KW's shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands. Features: Front Lowering: 1.2" to 2.0" Rear Lowering: 1.2" to 2.0" Version: XA Damping adjustment: Rebound Damping Galvanized Coilover struts with additional coating for optimized corrosion protection Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection Powerful twin-tube dampers with high-quality components for maximum longevity Externally adjustable damping 5 year limited warranty
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:50766807
    Part#: 352200ER
    Back Ordered
    $ 4,094.00 USD
    Free Shipping
    $ 4,094.00 USD
    Free Shipping
    The KW V3 is the ultimate suspension solution for the M4 Competition xDrive Convertible.
    KW Suspension - Corporate Logo
    T#:50731731
    Part#: 102200EX
    Back Ordered
    $ 2,494.00 USD
    Free Shipping
    $ 2,494.00 USD
    Free Shipping
    Delivers a pre-set damping profile that perfectly bridges the gap between aggressive driving and everyday comfort.
    BC Racing - Corporate Logo
    T#:4333547
    Part#: I-13-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50731700
    Part#: 10220011-B
    Back Ordered
    $ 1,664.00 USD
    Free Shipping
    $ 1,664.00 USD
    Free Shipping
    The KW V1 kit is the ultimate choice for drivers seeking custom ride height without sacrificing comfort.

    Suspension Techniques - Corporate Logo
    T#:5028764
    Part#: 182022080E
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping
    From the factory, the XTA plus 3 Coilover kit is equipped with KW dampers that are adjustable in high- and low-speed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high speed and low-speed compression damping, and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn't matter if you bolt in an aftermarket roll cage, weld in a cage, modification to PU bushings upgrade to spherical bushing or changed wheel loads - the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs, and aluminum unibal top mounts. Like all ST coilovers, the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction. The high-quality ST XTA plus 3 Coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731701
    Part#: 10220012-B
    Back Ordered
    $ 1,814.00 USD
    Free Shipping
    $ 1,814.00 USD
    Free Shipping
    Upgrade the stance and ride quality of your E36

    KW Suspension - Corporate Logo
    T#:384580
    Part#: 18020080KT
    Back Ordered
    $ 2,674.00 USD
    Free Shipping
    $ 2,674.00 USD
    Free Shipping
    KW Street Comfort coilovers offer the best mix of driving comfort and performance driving pleasure. With a KW Street Comfort coilover system, you can adjust the height of your vehicle, resulting in a comfortable ride with improved looks and driving dynamics. The KW Street Comfort coilover kit offers the following: Maximum driving comfort with improved driving dynamics. More comfort and flexibility over OE sport suspension. Less body roll and improved handling. Trapezoid thread for easy height adjustment. High quality components for long lasting durability.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361446
    Part#: 10220004
    Ships in 4 Business Days
    $ 2,214.00 USD
    Free Shipping
    $ 2,214.00 USD
    Free Shipping

    Factory Pre-set Damping 

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 20-50mm lowering; Rear = 15-40mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for an E90/E92 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50766785
    Part#: 15220013-B
    Back Ordered
    $ 2,144.00 USD
    Free Shipping
    $ 2,144.00 USD
    Free Shipping
    The ultimate upgrade for E36 owners who want a "no-compromises" approach to suspension.

    BC Racing - Corporate Logo
    T#:4333502
    Part#: I-10-RM-C
    Back Ordered
    $ 1,495.00 USD
    Free Shipping
    $ 1,495.00 USD
    Free Shipping
    BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361416
    Part#: 35220004
    Back Ordered
    $ 3,444.00 USD
    Free Shipping
    $ 3,444.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-50mm lowering; Rear = 15-40mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361418
    Part#: 35220006
    Ships in 4 Business Days
    $ 3,584.00 USD
    Free Shipping
    $ 3,584.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 10-40mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2004-2011 E63 BMW 645ci 650i Coupe
    2004-2011 E64 BMW 645ci 650i Convertible

    Show More Show Less


    BC Racing - Corporate Logo
    T#:4333517
    Part#: I-39-ZR
    Back Ordered
    2% off MSRP $ 2,895.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,835.00 USD
    Free Shipping
    2% off MSRP
    $ 2,895.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,835.00 USD
    Free Shipping
    BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50766810
    Part#: 352200DW
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    Designed for enthusiasts who want total command over their vehicle’s dynamics.