Find Parts That Fit Your Vehicle

BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

Suspension Techniques - Corporate Logo
T#:4319905
Part#: 18202208AU
Back Ordered
$ 2,799.00 USD
Free Shipping
$ 2,799.00 USD
Free Shipping
KW Suspension - Corporate Logo
T#:341230
Part#: 1522000E
Back Ordered
$ 2,924.00 USD
Free Shipping
$ 2,924.00 USD
Free Shipping
The KW V2 coilovers are intended for the experienced drivers who not only wish to adjust ride height, but also want to determine the rebound characteristics. Rebound dampening primarily controls the pitch and roll of the vehicle, especially in the low speed dampening range which directly influences handling and comfort. The rebound adjustment is externally adjustable via an adjustment spindle at the top of the shock.
Show More Show Less
KW Suspension - Corporate Logo
T#:50731732
Part#: 102200EY
Back Ordered
New Item
$ 2,494.00 USD
Free Shipping
$ 2,494.00 USD
Free Shipping
Delivers a pre-set damping profile that perfectly bridges the gap between aggressive driving and everyday comfort.

KW Suspension - Corporate Logo
T#:362420
Part#: 3522000E
Back Ordered
$ 3,644.00 USD
Free Shipping
$ 3,644.00 USD
Free Shipping
The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
Show More Show Less

KW Suspension - Corporate Logo
T#:34650260
Part#: 152200AG
Back Ordered
$ 2,594.00 USD
$ 2,594.00 USD
BC Racing - Corporate Logo
T#:4333523
Part#: I-26-ZR-O
Back Ordered
2% off MSRP $ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD
Free Shipping
2% off MSRP
$ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD
Free Shipping
BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty
Show More Show Less

KW Suspension - Corporate Logo
T#:11627
Part#: 35220008
Back Ordered
$ 3,394.00 USD
Free Shipping
$ 3,394.00 USD
Free Shipping

Adjustable Rebound & Compression Damping

State-of-the-art technology from motor sports for more performance on the road for your E39 5 Series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

  • Individually adjustable rebound and compression
  • Infinitely variable rebound damping adjustment
  • 14-way adjustable compression damping
  • Unique, individually working damping force adjustment
  • Stainless steel technology "inox-line"
  • Individually height-adjustable - Front = 35-65mm lowering; Rear = 30-60mm lowering,
  • TUV approved lowering range
  • High-quality component parts for long durability

Fitment Notes: This kit is not for vehicles equipped with EDC or self-leveling suspensions. Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i
Not for Sport Wagons.

Show More Show Less
BC Racing - Corporate Logo
T#:4347100
Part#: I-29-ER
Back Ordered
$ 1,935.00 USD
Free Shipping
$ 1,935.00 USD
Free Shipping
The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
Show More Show Less

BC Racing - Corporate Logo
T#:4333548
Part#: I-39-ER
Back Ordered
$ 1,935.00 USD
Free Shipping
$ 1,935.00 USD
Free Shipping
The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
Show More Show Less

AST Suspension - Corporate Logo
T#:27205370
Part#: ACU-B1301S
Back Ordered
$ 2,586.99 USD
$ 2,586.99 USD
BC Racing - Corporate Logo
T#:4319921
Part#: I-01-HM
Back Ordered
$ 2,535.00 USD
Free Shipping
$ 2,535.00 USD
Free Shipping
BC Racing's HM Coilover system offers the same great benefits of the RM Series with the addition of 2 way damping adjustment. Each HM Coilover system features inverted mono-tube dampers with independently adjustable compression and rebound. The inverted damper design moves vital damper fluid away from detrimental heat sources to avoid overheating which can cause damper fade under extreme track use. Know your safe from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Engineered for 100% track use * 30 levels of separate rebound and compression adjustment * Inverted damper design (depending on models) * Dual Piston design (1 res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty
Show More Show Less
KW Suspension - Corporate Logo
T#:338387
Part#: 35220080X
Back Ordered
Starting at $ 4,044.00 USD
Starting at $ 4,044.00 USD

Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

 

  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
  • Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with EDC will require the KW EDC Cancellation Kit (or similar) available from the menu below. Cars without EDC do not need any extra materials.

    Lifetime warranty!

    *Not for cars with Adaptive Drive* 


    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i
    2009+ F01 BMW 740i 740li 750i 750li
    Not for cars with Adaptive Drive.

 

Show More Show Less


Suspension Techniques - Corporate Logo
T#:31357370
Part#: 18220850KT
Back Ordered
$ 1,649.00 USD
$ 1,649.00 USD

MINI R55 R56 R57 ST XTA Performance Coilover System - Adjustable Damping 18220850 offers unmatched driving dynamics with its advanced KW damping technology. This high-performance coilover system allows for precise adjustment of both ride stiffness and comfort, thanks to its externally adjustable damping settings and aluminum uniball top mounts for camber and caster fine-tuning.

  • Latest damping technology for enhanced performance and longevity
  • Reduced system friction for smooth and effective damping adjustments
  • Adjustable lowering within TÜV-tested range: 1.2-2.2" front and rear
  • Front thread adjustment for customized ride height
  • Galvanized coilover struts with additional coating for superior corrosion protection
  • Complete kit includes adjustable spring plate, race springs, and dust-protected bumpers
  • Aluminum adjustable uniball top mounts for precise camber and caster adjustments
  • Externally adjustable damping for on-the-fly changes
  • 5-year limited warranty for peace of mind
Show More Show Less
Suspension Techniques - Corporate Logo
T#:599126
Part#: 18220062
Ships in 4 Business Days
$ 1,399.00 USD
Free Shipping
$ 1,399.00 USD
Free Shipping
Designed in conjunction with KW Germany, ST XA coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST XA coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
Show More Show Less
Suspension Techniques - Corporate Logo
T#:380131
Part#: 18220862KT
Back Ordered
$ 1,649.00 USD
Free Shipping
$ 1,649.00 USD
Free Shipping
For those who accept nothing less than razor sharp handling and ultimate control, the ST XTA Coilover System is built to deliver. Powered by world renowned KW damping technology and paired with adjustable aluminum uniball top mounts
Show More Show Less

KW Suspension - Corporate Logo
T#:341737
Part#: 180200AE
Back Ordered
$ 2,764.00 USD
Free Shipping
$ 2,764.00 USD
Free Shipping
Adjustable Rebound Damping, Sport Comfort Springs Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable - Front - 10-40mm, Rear - 20-40mm Trapezoid thread for a easy height adjustability High quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
Show More Show Less

KW Suspension - Corporate Logo
T#:50731707
Part#: 102200CK
Back Ordered
New Item
$ 2,494.00 USD
Free Shipping
$ 2,494.00 USD
Free Shipping
Perfect for drivers seeking the perfect ride height without the guesswork.
KW Suspension - Corporate Logo
T#:50731701
Part#: 10220012-B
Back Ordered
New Item
$ 1,814.00 USD
Free Shipping
$ 1,814.00 USD
Free Shipping
Upgrade the stance and ride quality of your E36

BC Racing - Corporate Logo
T#:4347103
Part#: I-84-ER
Back Ordered
$ 1,935.00 USD
Free Shipping
$ 1,935.00 USD
Free Shipping
The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
Show More Show Less
KW Suspension - Corporate Logo
T#:50830335
Part#: 352082000G
Back Ordered
New Item
$ 3,644.00 USD
Free Shipping
$ 3,644.00 USD
Free Shipping
Designed for drivers who prioritize chassis stability and steering response over aggressive lowering.

KW Suspension - Corporate Logo
T#:361415
Part#: 18020032
Back Ordered
$ 2,414.00 USD
Free Shipping
$ 2,414.00 USD
Free Shipping

Adjustable Rebound Damping, Sport Comfort Springs

Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads.

KW street comfort – The most individual sport suspension with maximum comfort

With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.

  • Maximum driving comfort for a perfect performance and more driving pleasure
  • Guarantees more comfort, flexibility and sportive as regular OE sport suspensions
  • Comfortable adjustment
  • Spring Rate; Front 286 lbs/inch, Rear 572 lbs/inch
  • Better handling due to less body roll
  • TUV approved lowering range
  • Individually height-adjustable - Front - 15-35mm, Rear - 10-30mm
  • Trapezoid thread for a easy height adjustability
  • High quality damper components for long durability
  • Adjustable rebound damping
  • Complete detailed documentation for easy use


FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2006-2012 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2013 E92 BMW 328i 335i 335is - Coupe

Show More Show Less

KW Suspension - Corporate Logo
T#:180871
Part#: 35220100
Back Ordered
$ 4,154.00 USD
Free Shipping
$ 4,154.00 USD
Free Shipping
Adjustable Rebound & Compression Damping Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - Separate adjustments for compression (14 positions) and rebound (infinite settings), Stiffer springs over stock for less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering, TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. This kit is intended for cars that came with the factory EDC suspension and includes the KW EDC Cancellation Kit. Lifetime warranty! This item fits the following BMWs: 2012+ F13 BMW 640i 650i - Coupe ONLY for cars with Adaptive Drive and EDC.
Show More Show Less
KW Suspension - Corporate Logo
T#:349082
Part#: 352208AK
Back Ordered
$ 4,584.00 USD
Free Shipping
$ 4,584.00 USD
Free Shipping
KW Clubsport coilovers were developed for customers who demand a better handling car when participating in track day events, but also require a setup that could be used on the street. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. These adjustment options, combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport Coilovers meet every demand regarding a coilover for the usage on the road and the race track.
Show More Show Less
KW Suspension - Corporate Logo
T#:348849
Part#: 35220825
Back Ordered
$ 4,744.00 USD
Free Shipping
$ 4,744.00 USD
Free Shipping

Tailored for track performance, the KW Clubsport Coilover Kit offers exceptional adjustability, catering to enthusiasts who desire precise ride quality adjustments according to varying loads, tire setups, and other driving factors.

Product Benefits:

  • Ideal for track performance
  • Abundant adjustability options
  • Precision in ride quality adjustments
  • Customizable settings for load, tires, and driving conditions
  • Enhanced handling and responsiveness
Show More Show Less


KW Suspension - Corporate Logo
T#:590905
Part#: 1022000Q
Ships in 4 Business Days
$ 2,094.00 USD
$ 2,094.00 USD
Factory Pre-set Damping

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a BMW owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:50830799
    Part#: 352082000E
    Back Ordered
    New Item
    $ 3,644.00 USD
    Free Shipping
    $ 3,644.00 USD
    Free Shipping
    The KW V3 Leveling system brings motorsport-grade precision to the BMW F30 and F32 platforms.
    Suspension Techniques - Corporate Logo
    T#:5028764
    Part#: 182022080E
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping
    From the factory, the XTA plus 3 Coilover kit is equipped with KW dampers that are adjustable in high- and low-speed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high speed and low-speed compression damping, and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn't matter if you bolt in an aftermarket roll cage, weld in a cage, modification to PU bushings upgrade to spherical bushing or changed wheel loads - the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs, and aluminum unibal top mounts. Like all ST coilovers, the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction. The high-quality ST XTA plus 3 Coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50830981
    Part#: 352082000D
    Back Ordered
    New Item
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping
    The KW V3 Leveling system brings "unadulterated directness" to the BMW F30 and F32 platforms.

    KW Suspension - Corporate Logo
    T#:361441
    Part#: 35220072
    Back Ordered
    $ 3,434.00 USD
    Free Shipping
    $ 3,434.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

     

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 15-40mm lowering; Rear = 10-35mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,
    • Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

      Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

      Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
      Cars equipped with EDC from the factory must have the system disabled with the optional KW EDC Cancellation Kit.

      Lifetime warranty!




      This item fits the following BMWs:
      2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

     

    Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:4319900
    Part#: 18202208AG
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping

    KW Suspension - Corporate Logo
    T#:11599
    Part#: 15220033
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping

    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 30-60mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!

    This item fits the following BMWs:
    2007-2012 E91 BMW 328i - Wagon
    2007-2013 E93 BMW 328i 335i - Convertible

     

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731716
    Part#: 102200EV
    Back Ordered
    New Item
    $ 2,184.00 USD
    Free Shipping
    $ 2,184.00 USD
    Free Shipping
    Upgrade your G23 with the ultimate balance of performance and safety.

    KW Suspension - Corporate Logo
    T#:341651
    Part#: 152200AD
    Back Ordered
    $ 2,924.00 USD
    Free Shipping
    $ 2,924.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning the company consisted of only three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:384580
    Part#: 18020080KT
    Back Ordered
    $ 2,674.00 USD
    Free Shipping
    $ 2,674.00 USD
    Free Shipping
    KW Street Comfort coilovers offer the best mix of driving comfort and performance driving pleasure. With a KW Street Comfort coilover system, you can adjust the height of your vehicle, resulting in a comfortable ride with improved looks and driving dynamics. The KW Street Comfort coilover kit offers the following: Maximum driving comfort with improved driving dynamics. More comfort and flexibility over OE sport suspension. Less body roll and improved handling. Trapezoid thread for easy height adjustment. High quality components for long lasting durability.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:4333547
    Part#: I-13-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:36269423
    Part#: 180200AT
    Back Ordered
    $ 2,334.00 USD
    Free Shipping
    $ 2,334.00 USD
    Free Shipping


    KW Suspension - Corporate Logo
    T#:4908003
    Part#: 102200CX
    Back Ordered
    $ 2,184.00 USD
    Free Shipping
    $ 2,184.00 USD
    Free Shipping
    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features: Pre-set damping optimized for a blend of ride comfort and handling with less body roll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrosion resistance, Individually height-adjustable (Front & Rear Lowering: 1.2"-2.0") TUV approved lowering range and operation Expert engineering and design for ease-of-use and long durability, This is the ideal coil-over kit for a BMW owner who does not plan on tracking or autocrossing the car often and mainly just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock, the Variant 1 is an excellent choice. Coil over suspensions are better-engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil-overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50766809
    Part#: 352200DX
    Back Ordered
    New Item
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    Achieve the perfect stance and unmatched stability in one premium, durable package.
    KW Suspension - Corporate Logo
    T#:341731
    Part#: 1522000T
    Back Ordered
    $ 2,924.00 USD
    Free Shipping
    $ 2,924.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive - Sedan
    2013+ F32 BMW 428i xDrive- Coupe
  • Show More Show Less

    BC Racing - Corporate Logo
    T#:598289
    Part#: I-34-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:349088
    Part#: 3972020E
    Back Ordered
    $ 7,054.00 USD
    Free Shipping
    $ 7,054.00 USD
    Free Shipping
    KW Clubsport coilovers were developed for customers who demand a better handling car when participating in track day events, but also require a setup that could be used on the street. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. These adjustment options, combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport Coilovers meet every demand regarding a coilover for the usage on the road and the race track.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:5282889
    Part#: 152200CM
    Ships in 4 Business Days
    $ 3,024.00 USD
    Free Shipping
    $ 3,024.00 USD
    Free Shipping
    The KW V2 coilovers are intended for the experienced drivers who not only wish to adjust ride height, but also want to determine the rebound characteristics. Rebound dampening primarily controls the pitch and roll of the vehicle, especially in the low speed dampening range which directly influences handling and comfort. The rebound adjustment is externally adjustable via an adjustment spindle at the top of the shock. KW V2 kits offer: Stainless Steel "Inox-Technology" High quality component parts for durability Adjustable rebound dampening technology Lowering range approved by the TüV Fully finished complete solutions
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50731700
    Part#: 10220011-B
    Back Ordered
    New Item
    $ 1,664.00 USD
    Free Shipping
    $ 1,664.00 USD
    Free Shipping
    The KW V1 kit is the ultimate choice for drivers seeking custom ride height without sacrificing comfort.
    KW Suspension - Corporate Logo
    T#:206111
    Part#: 1802000R
    Back Ordered
    $ 2,454.00 USD
    Free Shipping
    $ 2,454.00 USD
    Free Shipping
    Adjustable Rebound Damping, Sport Comfort Springs Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit, a lowering of 10-40mm can be realized depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time, the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product, KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility, and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable Trapezoid thread for an easy height adjustability High-quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
    Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:4319907
    Part#: 1820220842
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping

    KW Suspension - Corporate Logo
    T#:349104
    Part#: 3522000T
    Back Ordered
    $ 3,644.00 USD
    Free Shipping
    $ 3,644.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361872
    Part#: 15220090
    Back Ordered
    $ 3,294.00 USD
    Free Shipping
    $ 3,294.00 USD
    Free Shipping

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    This kit includes the KW EDC Cancellation Kit to disable the EDC adjustable shock system. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i with EDC
    Not for cars with Adaptive Drive.

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731733
    Part#: 102200FA
    Back Ordered
    New Item
    $ 2,184.00 USD
    Free Shipping
    $ 2,184.00 USD
    Free Shipping
    Delivers a pre-set damping profile that perfectly bridges the gap between aggressive driving and everyday comfort.


    KW Suspension - Corporate Logo
    T#:361446
    Part#: 10220004
    Ships in 4 Business Days
    $ 2,214.00 USD
    Free Shipping
    $ 2,214.00 USD
    Free Shipping

    Factory Pre-set Damping 

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 20-50mm lowering; Rear = 15-40mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for an E90/E92 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:341653
    Part#: 1522000K
    Back Ordered
    $ 2,924.00 USD
    Free Shipping
    $ 2,924.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




  • Show More Show Less