The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING

Height adjustment range:
F: -1.0-2.5"
R: -1.0-2.0"

This coilover kit fits the following BMWs:
6/1992-1998 E36 BMW 318i 318is

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

• 6k Front & 12k Rear Spring Rate
• S-Barrel front & Linear rear springs
• Valved specifically to spring style and rate
• Camber Plate Front Mounts
• Rear Rubber Mounts
• Black Powder Coated Components
• All OE style brackets and mounting for perfect fit
• 30 Levels of Simultaneous Compression and Rebound Dampening
• 2 inch minimum and 3+ Inches of total potential drop
• Great for Track, Street, and any other conditions

H&R has introduced this Street Tuner CoilOver suspension kit for the 1M that has several unique features for the discerning enthusiast. H&R has designed this premium coil over specifically for the 1M using new materials and features not found on a typical 135 or M3 kit. The key features of this kit are the aluminum rear shocks with solid, Heim-joined lower mounts. The lighter weight from the aluminum and the free motion from the lower monoball makes for a more efficient shock motion and better response from the suspension. Combine these with our monoball upper shock mounts and you have race-bred shock technology for the ultimate BMW driver's car. H&R finely-tuned the rear shock dampening to reduce wheel hop. The wheel hop is inherent in the 1M and these H&R rear shocks go a long way in eliminating it. The front struts are a true nickel-plated, threaded body replacement for the stock strut. All four progressive-rate springs are included and rear aluminum ride height adjusters complete the set. You'll find this kit on H&R's own Project 1M so it has been dialed in by some of the best suspension engineers in Germany and the USA.

These 1M Coil Overs are height adjustable in the front and rear using spring perches associated with each spring. This helps to improve handling by lowering the center of gravity, reducing bodyroll with a stiffer spring, and reducing the unsightly wheel-fender gap.
Front Adjustment Range: -1.2 to -2.3 inches from stock
Rear Adjustment Range: -0.3 to -1.3 inches from stock

SPECIAL PRICING FOR A VERY LIMITED TIME! 
FREE GROUND SHIPPING 

This coil over fits the following BMWs:
2011+ E82 BMW 1 M Coupe

BC Racing BR Series Coilovers - The Ultimate in Performance and Versatility

BC Racing has established itself as a trusted name in the automotive enthusiast community, thanks to their dedication to crafting adjustable coilover kits. With over a decade of experience, BC Racing delivers coilovers that are not only highly effective but also budget-friendly.

The BR Series coilover suspension kit is BC Racing's flagship product. It boasts compatibility with all stock mounting locations and components, making it the most popular and versatile suspension system in their lineup. It features linear springs whenever possible and offers impressive flexibility with 30 levels of dampening adjustment, including simultaneous compression and rebound control. Moreover, it allows for a minimum 2-inch ride height drop. BC Racing ensures top-notch quality and performance through extensive dyno testing, which includes assessing the ideal valving and spring rates for each chassis. All BR Series kits are rigorously tested for a minimum of 6 months before they are made available to the public, ensuring superior ride quality and reliability.

Key components of the BC Racing coilover system are designed for strength and performance. The upper shock and strut mounts are crafted from lightweight yet durable 6061-T6 Aluminum. The front design offers customization with options like Caster/Camber Plates, Camber plates, and Rubber Mount Plates, allowing for up to 3 degrees of camber adjustment. The Rubber Mount Plates excel at reducing unwanted NVH (Noise, Vibration, Harshness).

Lower shock mounts come in two variations: They are either made of 6061-T6 Aluminum, similar to the upper mounts (Fork or Bolt Eye Style Mount), milled from a single piece, or constructed from high-quality STKM13C steel with robotically welded brackets. In both cases, a powder coating is applied for enhanced corrosion protection and aesthetic appeal.

All springs used in BC Racing's coilover kits, including linear, S-barrel, and v-barrel springs, are manufactured from SAE9254 steel. These springs feature a Zinc coating beneath a powder-coated finish, ensuring resistance to rust and safeguarding performance and reliability. Linear springs are preferred in locations where the vehicle's original design permits them, while S-Barrel or V-Barrel springs are used to match OE shape/style specifications in cases where linear springs are not feasible. The spring rate is adjusted accordingly to maintain a linear response.

BC Racing crafts their kits using a diverse range of shock types, lengths, and diameters, tailored to each vehicle's requirements based on comprehensive R&D data. Each shock undergoes manual assembly at their factory and is subject to dyno testing to ensure precise quality and performance. Shocks are paired based on their compression and rebound values after dyno testing, providing even and reliable performance. The shock body used in the system boasts a 53mm diameter, delivering added strength, performance, and increased fluid capacity, unless space limitations dictate otherwise. To round it off, the shocks are treated with a black chrome finish, providing a clean, cohesive appearance and enhancing corrosion resistance.

Specifications and Features:

• 7k Front & 8k Rear Spring Rate
• S-Barrel front & Linear rear springs
• Valved specifically to spring style and rate
• Camber Plate Front Mounts
• Aluminum and Rubber Rear Mounts
• Black Powder Coated Components
• OE style brackets and mounting for a seamless fit
• 30 Levels of Simultaneous Compression and Rebound Damping
• Adjustable from a 2-inch minimum drop to a potential 3+ inches
• Ideal for Track, Street, and diverse driving conditions