Find Parts That Fit Your Vehicle

BMW Coilovers for Street Use

There are several coilover options on the market - while a lot of this decision boils down to preference, we categorize coilovers as aEURoestreetaEUR based on price and comfort level. Coilovers in our street category will be comfortable enough to use on your daily driver, but perform well enough to handle occasional autocross days and light track use. These coilovers also won't break the bank. However, many of the options we have under street coilovers share many of the same features as our track coilovers, they often just utilize less durable materials and won't hold up as well to torcher testing.
Sort By:

F22/F23 F30/F32 KW V3 Series Coilover Kit - Models With EDC
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KW Suspension - Corporate Logo
T#:362420
Part#: 3522000E
Back Ordered
$ 3,644.00 USD
Free Shipping
$ 3,644.00 USD
Free Shipping
The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
Show More Show Less
F39/F48 KW Coilover Kit V1
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KW Suspension - Corporate Logo
T#:396821
Part#: 102200BN
Special Order: No Guaranteed ETA
$ 2,044.00 USD
Free Shipping
$ 2,044.00 USD
Free Shipping

Factory Pre-set Damping 

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features - 

  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability, 

This is the ideal coil over kit for a F48 owner who wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 
Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC. 

Lifetime warranty!

This item fits the following BMWs: 
2016+ F48 BMW X1 s/xDrive28i

Show More Show Less
KW DDC Coilover Kit - DDC ECU Controlled - F30 320/328/330 xDrive ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KW Suspension - Corporate Logo
T#:363258
Part#: 39020030
Back Ordered
$ 4,964.00 USD
Free Shipping
$ 4,964.00 USD
Free Shipping
Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.0 - 2.2" Rear: 1.2 - 2.4"
Show More Show Less

BC Racing RM Series Coilover Suspension Kit - On-Center Mounts - Z3 M...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:4333502
Part#: I-10-RM-C
Back Ordered
$ 1,495.00 USD
Free Shipping
$ 1,495.00 USD
Free Shipping
BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.
Show More Show Less

BMW E36 RM Series Coilover Suspension Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:4319889
Part#: I-01-RM
Back Ordered
$ 1,495.00 USD
$ 1,495.00 USD

E36 RM Series Coilover Suspension Kit from BC Racing offers a top-tier solution for BMW enthusiasts seeking adjustable, street-and-track capable suspension upgrades. This kit is designed with high-quality inverted mono-tube dampers that enhance handling and performance. The RM Series provides superior strength and consistency, thanks to its large 42mm damper rod and inverted design. This setup reduces unsprung weight and improves steering geometry, making it ideal for both daily driving and competitive use.

  • Highly customizable for tailored performance
  • Features inverted mono-tube dampers for improved strength and resistance
  • Linear piston and damping curve for precise handling
  • Independent height adjustment from spring compression
  • 30-clicks of simultaneous compression and rebound adjustment
  • Front camber plates included with applicable kits
  • Rear camber plates available for applicable kits
  • Custom spring rates and Swift spring compatibility
  • Custom or paired valving for optimized performance
  • 1-year warranty against manufacturer defects
  • Fully rebuildable for long-term use
  • Supplied by Turner Motorsport for assured quality
Show More Show Less
E82 128i/135i KW Coilover Kit - Variant 2 (V2)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KW Suspension - Corporate Logo
T#:361413
Part#: 15220039
Back Ordered
$ 2,594.00 USD
Free Shipping
$ 2,594.00 USD
Free Shipping

Adjustable Rebound Damping 

The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 35-65mm lowering; Rear = 35-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,

This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i Coupe

Show More Show Less

ST XTA Plus 3-Way Adjustable Damping Coilover Kit Without EDC/DDC ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Suspension Techniques - Corporate Logo
T#:4319900
Part#: 18202208AG
Back Ordered
$ 2,799.00 USD
Free Shipping
$ 2,799.00 USD
Free Shipping
BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:4347104
Part#: I-49-ER
Back Ordered
$ 1,935.00 USD
Free Shipping
$ 1,935.00 USD
Free Shipping
The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
Show More Show Less

E89 Z4 2.8i/30i/35i/35is KW Coilover Kit V3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KW Suspension - Corporate Logo
T#:11669
Part#: 35220087
Back Ordered
$ 3,744.00 USD
Free Shipping
$ 3,744.00 USD
Free Shipping

Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

 

  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 15-40mm lowering; Rear = 10-35mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
  • Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars equipped with EDC from the factory must have the system disabled with the optional KW EDC Cancellation Kit.

    Lifetime warranty!




    This item fits the following BMWs:
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

 

Show More Show Less

TC Kline Single Adjustable Street/Track Coilover Kit - Z3 - FS 400# /...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
TC Kline Racing - Corporate Logo
T#:31755189
Part#: TCKZ3SINGLEKIT50
Ships in 2 Business Days
$ 2,354.99 USD
$ 2,354.99 USD
Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/500#R springs .
Show More Show Less
BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For models originally WITH EDC
BC Racing - Corporate Logo
T#:4333547
Part#: I-13-ER
Back Ordered
$ 1,935.00 USD
Free Shipping
$ 1,935.00 USD
Free Shipping
The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
Show More Show Less
ST XTA Plus 3-Way Adjustable Damping Coilover Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Suspension Techniques - Corporate Logo
T#:4319907
Part#: 1820220842
Special Order: No Guaranteed ETA
$ 2,799.00 USD
Free Shipping
$ 2,799.00 USD
Free Shipping


F30/F32 KW Coilover Kit V2
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KW Suspension - Corporate Logo
T#:341731
Part#: 1522000T
Back Ordered
$ 2,924.00 USD
Free Shipping
$ 2,924.00 USD
Free Shipping
Adjustable Rebound Damping

The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive - Sedan
    2013+ F32 BMW 428i xDrive- Coupe
  • Show More Show Less
    F01/F02/F06/F10 KW Coilover Kit - Variant 2 (V2)
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:361870
    Part#: 15220080
    Back Ordered
    $ 2,834.00 USD
    Free Shipping
    $ 2,834.00 USD
    Free Shipping

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Not for cars with the factory EDC system. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i without EDC
    2009+ F01 BMW 740i 740li 750i 750li 
    Not for cars with Adaptive Drive.

    Show More Show Less
    E84 KW V3 Series Coilover Kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:362695
    Part#: 35220068
    Special Order: No Guaranteed ETA
    $ 3,434.00 USD
    Free Shipping
    $ 3,434.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
    Show More Show Less

    KW DDC Plug & Play Coilover Kit - G22 430i xDrive (With EDC) ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:4908015
    Part#: 39020048
    Back Ordered
    $ 4,354.00 USD
    Free Shipping
    $ 4,354.00 USD
    Free Shipping
    Today, more and more premium vehicles are being fitted with an electronically adaptive suspension system. Before KW DDC Plug & Play coilovers were introduced to the market, you often had to make compromises when customizing your suspension lowering, and often had to eliminate the active electronic control system and comfort features that you had paid extra for. With the adaptive KW DDC Plug & Play coilover suspensions there are no compromises to be made and you can combine the control of your standard damper system with a seamless suspension lowering and the driving dynamics tuned by KW suspensions experienced engineers. During installation, the factory electronic struts are simply replaced by KW “inox-line” stainless steel coilover struts and the adaptive KW dampers are connected to the on-board electronics using your vehicle's original plugs. Fitting a KW DDC Plug & Play coilover suspension requires no further modifications. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover kit. The existing controls and the button installed in the vehicle interior for the operation of the damper control will now operate the KW DDC Plug & Play coilovers. For the first time, the KW DDC Plug & Play coilover kit combines the advantages of a KW coilover suspension with the convenience of the standard electronic damper controls. At the push of a button, the driver can choose between the Comfort, Normal and Sport setup optimized for the KW coilover suspension. In addition, the KW coilover suspension allows individual ride height adjustability within the tested adjustment range. Our original equipment quality suspension technology is compatible with various vehicle manufacturers. As a result, the adaptive KW DDC suspension is instantly recognized by the on-board electronics. So all the displays and controls of your factory vehicle remain fully functional but you get a completely new driving experience.
    Show More Show Less

    KW V3 Coilover Kit - BMW G82/G83 M4 Competition
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:50766807
    Part#: 352200ER
    Back Ordered
    New Item
    $ 4,094.00 USD
    Free Shipping
    $ 4,094.00 USD
    Free Shipping
    The KW V3 is the ultimate suspension solution for the M4 Competition xDrive Convertible.
    BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mounts - BMW...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    BC Racing - Corporate Logo
    T#:4347100
    Part#: I-29-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less

    BC Racing ER Series Coilover Suspension Kit - Off-Center Front Mounts...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    BC Racing - Corporate Logo
    T#:4333551
    Part#: I-14-ER-O
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    E63/E64 KW V3 Series Coilover Kit - With EDC Delete kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:11666
    Part#: 35220084
    Back Ordered
    $ 4,594.00 USD
    Free Shipping
    $ 4,594.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    F33/F36 KW Coilover Kit - Variant 1 (V1)
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:206107
    Part#: 1022000H
    Back Ordered
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F33 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2013+ F33 BMW 428i Convertible
    2014+ F36 BMW 428i Gran Coupe
  • Show More Show Less

    ST XA Performance Coilover System - Height And Rebound Adjustable - E...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Suspension Techniques - Corporate Logo
    T#:599124
    Part#: 18220023
    Back Ordered
    $ 1,399.00 USD
    Free Shipping
    $ 1,399.00 USD
    Free Shipping
    Designed in conjunction with KW Germany, ST XA coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST XA coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
    Show More Show Less
    E63 E64 KW V1 Series Coilover Kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:367046
    Part#: 10220006
    Back Ordered
    $ 2,044.00 USD
    Free Shipping
    $ 2,044.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    BC Racing HM Series Coilover Suspension Kit With Center Mounts - E36 ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    BC Racing - Corporate Logo
    T#:4333500
    Part#: I-26-HM
    Back Ordered
    $ 2,535.00 USD
    Free Shipping
    $ 2,535.00 USD
    Free Shipping
    BC Racing's HM Coilover system offers the same great benefits of the RM Series with the addition of 2 way damping adjustment. Each HM Coilover system features inverted mono-tube dampers with independently adjustable compression and rebound. The inverted damper design moves vital damper fluid away from detrimental heat sources to avoid overheating which can cause damper fade under extreme track use. Know your safe from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Engineered for 100% track use * 30 levels of separate rebound and compression adjustment * Inverted damper design (depending on models) * Dual Piston design (1 res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty NOTE: LEAD TIMES FOR ALL NEW ORDERS ARE 4-8 WEEKS.
    Show More Show Less


    KW V1 Coilover Kit Bundle - BMW G42 RWD 2' & G20 RWD 3'
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:50731707
    Part#: 102200CK
    Back Ordered
    New Item
    $ 2,494.00 USD
    Free Shipping
    $ 2,494.00 USD
    Free Shipping
    Perfect for drivers seeking the perfect ride height without the guesswork.
    F10/F06 M5 M6 KW V3 Series Coilover Kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:362424
    Part#: 35220097
    Back Ordered
    $ 4,394.00 USD
    Free Shipping
    $ 4,394.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    MINI R56 KW V2 Series Coilover Kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:31324153
    Part#: 15220070KT
    Back Ordered
    $ 2,594.00 USD
    $ 2,594.00 USD

    KW V2 Coilover Kit for Mini R56 Cooper S and JCW

    The KW V2 Coilover Kit is designed for the experienced driver looking to finely tune their vehicle's performance. Ideal for the Mini R56 Cooper S and JCW models, this system allows for individual lowering and precise setup adjustments, enhancing both handling and driving pleasure.

    Key Benefits:

    • Stainless Steel Inox-Technology for durability and longevity
    • High-quality components for reliable performance
    • Adjustable rebound dampening for custom pitch and roll behavior
    • TüV approved lowering range for legal compliance
    • Fully finished, complete solution for easy installation
    • Average lowering range of 1.2 to 2.2 inches for front and rear
    Show More Show Less

    KW Street Comfort Coilovers - BMW F48 X1, F39 X2
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:5376313
    Part#: 180200BPKT
    Back Ordered
    $ 2,644.00 USD
    Free Shipping
    $ 2,644.00 USD
    Free Shipping
    Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort – The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40 mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable - Front 20-45mm, Rear 20-45mm Trapezoid thread for a easy height adjustability High quality damper components for long durability Adjustable rebound damping Complete detailed documentation for easy use
    Show More Show Less

    F31/F34/F36 KW V2 Series Coilover System
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:341652
    Part#: 152200AB
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 35-60mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F31 BMW 328i xDrive - Wagon
  • Show More Show Less
    KW Clubsport Coilover Kit - with camber plates
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:343007
    Part#: 35220827TMKT
    Back Ordered
    $ 4,744.00 USD
    $ 4,744.00 USD
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling.
    Show More Show Less

    F22 F23 KW V1 Series Coilover Kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:590905
    Part#: 1022000Q
    Ships in 4 Business Days
    $ 2,094.00 USD
    $ 2,094.00 USD
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a BMW owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+
  • Show More Show Less
    DS Series Coilover Suspension Kit - R55/R56/R57/R58/R59
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    BC Racing - Corporate Logo
    T#:23416548
    Part#: T-02-DS
    Back Ordered
    $ 1,415.00 USD
    Free Shipping
    $ 1,415.00 USD
    Free Shipping

    BC Racing introduces the DS Series Coilovers, designed to elevate the driving experience for automotive enthusiasts. These coilovers boast a proprietary digressive piston design, delivering heightened damping force at lower speeds, ideal for enthusiasts tackling tracks or navigating winding roads.

    • Utilizes proprietary digressive piston design for enhanced damping force
    • Valved specifically for spring style and rate
    • Features camber plate front mounts and aluminum/rubber rear mounts
    • Offers 30 levels of simultaneous compression and rebound dampening
    • Ideal for track, street, and versatile conditions
    Show More Show Less

    KW DDC Coilover Kit - DDC ECU Controlled - E88 1 Series
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:348917
    Part#: 39020003
    Back Ordered
    $ 4,894.00 USD
    Free Shipping
    $ 4,894.00 USD
    Free Shipping
    Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.2 - 2.2" Rear:1.0 - 2.0"
    Show More Show Less

    KW V2 Coilover Kit - BMW G23 M440ixc
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:50831566
    Part#: 152200EY
    Back Ordered
    New Item
    $ 3,024.00 USD
    Free Shipping
    $ 3,024.00 USD
    Free Shipping
    The KW V2 is the definitive suspension solution for the BMW G23 enthusiast.
    KW Coilover Kit V4 - 2022+ BMW M3 (G80) Sedan/ M4 (G82) Coupe AWD ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:29898453
    Part#: 3A7200EQ
    Back Ordered
    $ 7,894.00 USD
    $ 7,894.00 USD
    Z4 2.5/3.0/3.0i/3.0si KW V1 Series Coilover Kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:361446
    Part#: 10220004
    Back Ordered
    $ 2,214.00 USD
    Free Shipping
    $ 2,214.00 USD
    Free Shipping

    Factory Pre-set Damping 

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 20-50mm lowering; Rear = 15-40mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for an E90/E92 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

    Show More Show Less


    ST X Performance Coilover System - E85 Z4
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Suspension Techniques - Corporate Logo
    T#:599111
    Part#: 13220004
    Back Ordered
    $ 1,089.00 USD
    Free Shipping
    $ 1,089.00 USD
    Free Shipping
    Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
    Show More Show Less
    MINI R58 R59 KW V1 Series Coilover Kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:31357317
    Part#: 1022000BKT
    Back Ordered
    $ 2,044.00 USD
    $ 2,044.00 USD

    Looking to enhance your Mini's performance and aesthetics simultaneously? The KW V1 Coilover Kit from Turner Motorsport is your ultimate solution. This coilover kit is expertly engineered to provide the perfect balance of improved handling and adjustable ride height, allowing you to achieve a sportier stance without compromising comfort. KW's extensive on and off-track testing ensures the ideal pre-set dampening for an unparalleled driving experience.

    • Enhanced Handling: Significantly improves your Mini's handling characteristics for a more responsive drive.
    • Adjustable Ride Height: Customize your vehicle's height for a performance-oriented look without sacrificing ride quality.
    • Stainless Steel "Inox-Technology: Offers superior durability and corrosion resistance.
    • High-Quality Components: Ensures long-lasting performance and reliability.
    • Sport Harmonious Dampening Technology: Delivers a perfect blend of comfort and sportiness.
    • TüV Approved Lowering Range: Allows safe and optimal lowering from 0.6 to 1.6 inches in the front and 0.6 to 1.8 inches in the rear.

    Note: Not compatible with JCW GP edition.

    Show More Show Less
    BC Racing RM Series Coilover Suspension Kit - E38 730i/iL 740i/iL 750...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    BC Racing - Corporate Logo
    T#:4319910
    Part#: I-23-RM
    Back Ordered
    $ 1,495.00 USD
    Free Shipping
    $ 1,495.00 USD
    Free Shipping
    BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.
    Show More Show Less

    KW Coilover Kit - Variant 1 (V1) - F30 320i, 328i, F32 428i, F22 228i...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:338245
    Part#: 1022000X
    Back Ordered
    Starting at $ 2,094.00 USD
    Starting at $ 2,094.00 USD
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F30 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2014+ F22 BMW 228i
    2012+ F30 BMW 320i, 328i - Sedan
    2013+ F32 BMW 428i - Coupe
  • Show More Show Less

    KW V3 Leveling Coilover Kit - BMW F30 3', F32 4'
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:50830562
    Part#: 352082000F
    Back Ordered
    New Item
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping
    The KW V3 Leveling system brings "unadulterated directness" to the BMW F30 and F32 platforms.
    ST XTA Plus 3 Coilover Kit - E36 M3 (S50, S52)
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Suspension Techniques - Corporate Logo
    T#:638034
    Part#: 1820220812
    Special Order: No Guaranteed ETA
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping
    After the success of ST's XTA line of coilovers, it's no wonder ST decided to take things a step further with their all-new XTA Plus 3 coilovers. These new coilovers take many of the great features of the XTA line and integrated them in a package with significantly more control, allowing you to individually adjust 3 dampening settings, including High-Speed Compression, Low-Speed Compression, and Rebound dampening. This makes dialing in your preferred tack settings a breeze and allows for fine-tuned adjustment to suit any track conditions and racing styles! As an added bonus, this means even major vehicle modifications (such as heavy roll cages, bushing changes, altered wheel loads) can be taken into account when adjusting your coilovers to help you further maintain similar optimal handling characteristics. Features: Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Individual lowering within the tested adjustment range Front and rear axle (when possible) with thread adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection Aluminum adjustable uniball top mounts (when possible) Scaled camber adjustment (when possible) 3-way adjustable dampers: 18 clicks low-speed rebound damping 24 clicks low-speed compression damping 24 clicks high-speed compression damping Lowering Specifications: Front: 1.2-2.4" Rear: 0.8-1.8"
    Show More Show Less

    E36 318i/323i/325i/328i KW Coilover Kit - Clubsport
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:11678
    Part#: 35220811
    Back Ordered
    $ 4,094.00 USD
    Free Shipping
    $ 4,094.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs

    KW Clubsport coilovers was developed for E36 3 Series owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 40-80mm, Rear - 30-60mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 685 lbs/inch, Rear - progressive.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment note: wheel spacers may be required depending on wheel sizing and offset.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
  • Show More Show Less
    KW V3 Series Coilover Kit - BMW G15/16 840i RWD
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:12643101
    Part#: 352200EM
    Back Ordered
    $ 4,194.00 USD
    Free Shipping
    $ 4,194.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Front Lowering:0.4" to 1.4" Rear Lowering:0.6" to 1.6" Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    MINI F56 JCW GP3 KW Clubsport Coilover Kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:1150781
    Part#: 352208DT
    Back Ordered
    $ 4,154.00 USD
    Free Shipping
    $ 4,154.00 USD
    Free Shipping

    MINI F56 JCW GP3 KW Clubsport Coilover Kit is engineered for drivers demanding superior handling on the track and the flexibility to drive on the street. Designed with track day enthusiasts in mind, this coilover kit includes independently adjustable rebound and compression damping, allowing precise suspension tuning based on vehicle load, tire characteristics, and track conditions. With high-performance linear race springs and optional racing top mounts for camber adjustment, the KW Clubsport kit delivers unparalleled agility and lap time performance.

    • Independently adjustable rebound and compression damping
    • High-performance linear race springs for enhanced handling
    • Stainless steel Inox-Line technology ensures durability and corrosion resistance
    • Optional racing top mounts for camber adjustments
    • TÜV-approved lowering range: front 1.0"–2.0", rear 1.2"–2.6"
    • Height adjustable on both front and rear axles
    • Designed specifically for the MINI Cooper JCW GP3
    Show More Show Less

    BC Racing DS Series Coilover Suspension Kit - Weld In - E28 528e 533i...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    BC Racing - Corporate Logo
    T#:598289
    Part#: I-34-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less
    E85/E86 Z4 2.5/3.0/3.0i/3.0si KW Coilover Kit - Clubsport
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:11677
    Part#: 35220804
    Back Ordered
    $ 4,334.00 USD
    Free Shipping
    $ 4,334.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs - 2 Way Adjustable

    KW Clubsport coilovers was developed for E85 Z4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 20-50mm, Rear - 15-40mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 400 lbs/inch, Rear Progressive.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment note: wheel spacers may be required depending on wheel sizing and offset.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
  • Show More Show Less
    E38 KW Coilover Kit - Variant 3 (V3)
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:361430
    Part#: 35220029
    Back Ordered
    $ 3,094.00 USD
    Free Shipping
    $ 3,094.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    State-of-the-art technology from motor sports for more performance on the road for your E38 7 series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

    • Individually adjustable rebound and compression
    • Infinitely variable rebound damping adjustment
    • 14-way adjustable compression damping
    • Unique, individually working damping force adjustment
    • Stainless steel technology "inox-line"
    • Individually height-adjustable - Front - 30-60mm, Rear - 20-50mm
    • TUV approved lowering range
    • High-quality component parts for long durability

    When using original tires, wheel spacers may be required 
    Not for vehicles with automatic self leveling control.

    FREE FEDEX GROUND SHIPPING! FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    1995-2001 E38 BMW 740i 740il 750il

    Show More Show Less


    KW V1 Classic Line Coilover Kit - BMW E36 3'
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:50731701
    Part#: 10220012-B
    Back Ordered
    New Item
    $ 1,814.00 USD
    Free Shipping
    $ 1,814.00 USD
    Free Shipping
    Upgrade the stance and ride quality of your E36
    HM Series Coilover Suspension Kit - Without Rear Pillowball - E90/92 ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    BC Racing - Corporate Logo
    T#:4319924
    Part#: I-03-HM
    Back Ordered
    $ 2,535.00 USD
    Free Shipping
    $ 2,535.00 USD
    Free Shipping
    BC Racing's HM Coilover system offers the same great benefits of the RM Series with the addition of 2 way damping adjustment. Each HM Coilover system features inverted mono-tube dampers with independently adjustable compression and rebound. The inverted damper design moves vital damper fluid away from detrimental heat sources to avoid overheating which can cause damper fade under extreme track use. Know your safe from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Engineered for 100% track use * 30 levels of separate rebound and compression adjustment * Inverted damper design (depending on models) * Dual Piston design (1 res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty NOTE: LEAD TIMES FOR ALL NEW ORDERS ARE 4-8 WEEKS.
    Show More Show Less