The F97 and F98 both have a very striking and attractive style. Although they do have some optional carbon additions, there is always room for more. The folks at AUTOTECKNIC have created this front bumper trim piece that replaces the gloss black trim below the kidney grilles. Give the front end of your ride this carbon upgrade is a no-brainer and made from high-quality dry carbon that will stand the test of time! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. This AutoTecknic Dry Carbon Fiber Bumper Trim will match with all the different aerodynamic packages currently offered on the market. Additionally, it can be used to cover up holes and imperfections in the area on the factory bumper.
Show More Show Less
Small rock chips can cause unsightly damage to your beloved G80 M3. AutoTecknic has specifically made the carbon fiber rear wheel arch extensions in the pre-preg dry carbon method to prevent unavoidable damage caused by minor rock chips and guard against water puddles and newly paved tar on the road. Not to mention that the extension on the rear wheel arches looks more trendy. These AutoTecknic carbon fiber rear wheel arch extension sets utilize the original mounting location. They are skillfully made in 3K twill weave carbon fiber by our master craftsman for the perfect aesthetic and fitment.
Show More Show Less
There's no detail too small to customize; all enthusiasts know that any change can make a world of difference. The same is true of these AutoTecknic carbon fiber side vent sets. When it comes to carbon fiber, you're guaranteed to get a unique and lightweight design, not to mention incredibly sturdy. Leave no stone unturned when it comes to your BMW; make your vision come alive with AutoTecknic.
Show More Show Less
Autotecknic's dry carbon fiber fender trim vents for the E70 X5M are composed of a 2x2 twill weave dry carbon fiber composition. The surface is coated with a high gloss clear coat and the underlying carbon fiber overlay is laid on with meticulous care ensuring their longevity. Package includes one pair of passenger and driver side direct OEM replacement fender trim.
Show More Show Less
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic's dry carbon fiber fender trim covers for the G01 X3 and G02 X4 are 3x3 twill weave dry carbon fiber fender trim covers that have a thickness of 1 millimeter. The surface is coated with a high gloss clear coat and the underlying carbon fiber overlay is laid on with meticulous care ensuring their longevity. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Set includes left and right sides.
Show More Show Less
It's the small details that matter! These AUTOTECKNIC dry carbon fender trim pieces add a perfect carbon contrast to your car leaving you with a sporty, high-quality look! Satisfy your carbon urge today!
Show More Show Less
Give your 6-series this subtle visual upgrade with these Autotecknic carbon fiber fender trim pieces. Rigorously tested in all environments, these trim pieces are ready to give your car an aggressive look while maintaining rigidity! The surface is coated with a high gloss clear coat and the underlying carbon fiber overlay is laid on with meticulous care thus ensuring that each grill you receive are uniform and breathes the same quality as your BMW straight from the factory.
Show More Show Less
Give your non-M E46 COUPE or CONVERTABLE the aggressive look of the M3 with our HARD Motorsport Rivet-on Fender Flares for your E46. We created the molds directly from actual M3 fenders to allow fitment of wheel-tire combos similar to those successfully run on E46 Ms. These flares are a ready-to-go option, which will allow you to run the wider rubber you want for track days or autocross sessions. The HARD Motorsport Fender Flares are specially designed to allow you to keep your factory BMW moldings intact and to retain the classic, factory look of your car.
Show More Show Less
From 3D Design comes a pair of F90 M5 Carbon Side Vents which were designed to help your vehicle stand out even more. These vents are constructed from 2x2 weave carbon fiber and are relatively easy to install. Reuses installed side grilles.
Show More Show Less
