Find Parts That Fit Your Vehicle

Fender Upgrades

Here at Turner Motorsport, we carry both carbon fiber and wider fenders for your BMW.

This category contains parts that fit the following chassis:

Sort By:
Autotecknic Replacement Carbon Fiber Fender Slats - E63 Coupe / E64 Cabrio - 6-Series /M6
Autotecknic Replacement Carbon Fiber Fender Slats - E63 Coupe / E64 C...
AUTOTECKNIC - Corporate Logo
T#:21407089
Part#: ATK-BM-0205
Ships in 7 Business Days
$ 165.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 165.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Give your 6-series this subtle visual upgrade with these Autotecknic carbon fiber fender trim pieces. Rigorously tested in all environments, these trim pieces are ready to give your car an aggressive look while maintaining rigidity! The surface is coated with a high gloss clear coat and the underlying carbon fiber overlay is laid on with meticulous care thus ensuring that each grill you receive are uniform and breathes the same quality as your BMW straight from the factory.
Show More Show Less
AUTOTECKNIC Dry Carbon Fiber Fender Trim - F9X M8
AUTOTECKNIC Dry Carbon Fiber Fender Trim - F9X M8
AUTOTECKNIC - Corporate Logo
T#:21176920
Part#: ATK-BM-0029-DCG
Ships in 7 Business Days
$ 165.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 165.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The folks at AUTOTECKNIC take details to the next level, especially with dry carbon fender trim pieces. Made from 3k twill weave dry carbon, these pieces are ultra-thin and leave you with a high-quality OEM fit and finish. Dry carbon is the highest-quality version of carbon fiber products that are produced. Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed autoclave to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. With the strength and quality that will stand the test of time, these trim pieces are a no-brainer to add to your vehicle!
Show More Show Less
Alpha-N G87 M2 Carbon Front Fender Set - V2 With Blades
Alpha-N G87 M2 Carbon Front Fender Set - V2 With Blades
Alpha-N - Corporate Logo
T#:27005145
Part#: AN-0523
Ships in 3 Business Days
$ 4,595.00 USD
Free Shipping
Add to Wish List
$ 4,595.00 USD
Free Shipping
Add to Wish List
Alpha-N has a reputation for pushing the boundaries of performance and style. With Alpha-N's connection to BMW Motorsport and their track record of producing high-quality carbon parts, their latest G8X M2 / M3 / M4 components are no exception. Anyone familiar with Alpha's carbon fenders for the F87-chassis M2 knows that their aero components are truly an exercise of form following function. As aero designs advance and motorsport applications make their way onto road cars, we once again see that Alpha-N is employing a similar design as Porsche for airflow around the front of the car. Much like their previous generation fenders, Alpha's G87 V2 carbon fender set utilizes the same aero blade element as the new 992 GT3 RS. As air flows into the left and right coolers in the M2's front bumper and into the wheel wells, it can then escape out of the blade openings in front of the doors. The mass evacuation of air from inside the front fenders reduces air pressure, increasing downforce. Note: Fenders Come in Bare Carbon Fiber Finish
Show More Show Less
AutoTecknic Dry Carbon V1 Fender Set - A90 Supra 2020-Up
AutoTecknic Dry Carbon V1 Fender Set - A90 Supra 2020-Up
AUTOTECKNIC - Corporate Logo
T#:39599350
Part#: TO-0012
Ships in 7 Business Days
$ 649.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 649.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade your Toyota Supra A90’s exterior with the AutoTecknic Dry Carbon V1 Fender Set, a perfect combination of style, functionality, and weight reduction for enthusiasts looking to take their Supra to the next level.
Show More Show Less
AutoTecknic Carbon Rear Wheel Arch Extension Set - G80 M3
AutoTecknic Carbon Rear Wheel Arch Extension Set - G80 M3
AUTOTECKNIC - Corporate Logo
T#:14386776
Part#: BM-0243
Ships in 7 Business Days
$ 310.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 310.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Small rock chips can cause unsightly damage to your beloved G80 M3. AutoTecknic has specifically made the carbon fiber rear wheel arch extensions in the pre-preg dry carbon method to prevent unavoidable damage caused by minor rock chips and guard against water puddles and newly paved tar on the road. Not to mention that the extension on the rear wheel arches looks more trendy. These AutoTecknic carbon fiber rear wheel arch extension sets utilize the original mounting location. They are skillfully made in 3K twill weave carbon fiber by our master craftsman for the perfect aesthetic and fitment.
Show More Show Less
Autotecknic Replacement Dry Carbon Fiber Fender Trim - F97/F98/G01/G02
Autotecknic Replacement Dry Carbon Fiber Fender Trim - F97/F98/G01/G0...
AUTOTECKNIC - Corporate Logo
T#:5135671
Part#: ATK-BM-0093-CF
Ships in 7 Business Days
$ 595.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 595.00 USD
Free Shipping on orders $49 and up
Add to Wish List
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic's dry carbon fiber fender trim covers for the F97/F98 X3M and X4M are composed of a 2x2 twill weave dry carbon fiber composition. The surface is coated with a high gloss clear coat and the underlying carbon fiber overlay is laid on with meticulous care ensuring their longevity. These trim covers will also fit the G01 X3 and G02 X4. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Set includes left and right sides. *Note: Emblems are not included.
Show More Show Less
Autotecknic Replacement Glazing Black Fender Trims - F15 X5 / F85 X5M
Autotecknic Replacement Glazing Black Fender Trims - F15 X5 / F85 X5M...
AUTOTECKNIC - Corporate Logo
T#:21407047
Part#: ATK-BM-0078-GB
Ships in 7 Business Days
$ 150.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 150.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Made for a seamless and secure fit, these Autotecknic glazing black fender grilles are perfect if you desire a more aggressive look with a subtle upgrade! Package includes one pair of passenger and driver side direct OEM replacement fender trim.
Show More Show Less
AUTOTECKNIC Carbon Fiber Rear Wheel Arch Extension Set - G30
AUTOTECKNIC Carbon Fiber Rear Wheel Arch Extension Set - G30 ...
AUTOTECKNIC - Corporate Logo
T#:21209829
Part#: ATK-BM-0204
Ships in 7 Business Days
$ 240.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 240.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Small rock chips can cause unsightly damage to your beloved G30. AutoTecknic has specifically made the carbon fiber rear wheel arch extensions in the pre-preg dry carbon method to prevent unavoidable damage caused by minor rock chips and guard against water puddles and newly paved tar on the road. Not to mention that the extension on the rear wheel arches looks more trendy. They are skillfully made in 3K twill weave carbon fiber by our master craftsman for the perfect aesthetic and fitment. These AutoTecknic carbon fiber rear wheel arch extension sets utilize the original mounting location.
Show More Show Less
AUTOTECKNIC Dry Carbon Wheel Arch Trim Kit - G87 M2 - Front
AUTOTECKNIC Dry Carbon Wheel Arch Trim Kit - G87 M2 - Front
AUTOTECKNIC - Corporate Logo
T#:20979711
Part#: ATK-BM-0054
Ships in 7 Business Days
$ 350.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 350.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Give your car some personalization and carbon pop with these AUTOTECKNIC dry carbon front fender arches! Made from high-quality dry carbon fiber, this product is durable and ready to give your car some more personality!
Show More Show Less
AP Designed F87 Carbon Fiber Front Fenders - F87 M2, M2 Comp, M2 CS
AP Designed F87 Carbon Fiber Front Fenders - F87 M2, M2 Comp, M2 CS ...
Suvneer - Corporate Logo
T#:25473965
Part#: F87CFENDERS
Ships in 6 Business Days
$ 1,999.00 USD
Add to Wish List
$ 1,999.00 USD
Add to Wish List
The AP Designed F87 Carbon Fiber Front Fenders are a high-performance and visually striking upgrade for your vehicle. Crafted with precision and attention to detail, these front fenders are specifically designed for the F87 chassis, ensuring a seamless fit and enhanced aerodynamics. Constructed from high-quality carbon fiber materials, these front fenders not only contribute to the overall lightweight design of your vehicle but also add a touch of aggressive styling. The carbon fiber construction not only provides strength and durability but also gives a modern and sporty appearance. Upgrade your vehicle with these premium carbon fiber front fenders, and enjoy the combination of form and function that adds a distinctive edge to your F87 while delivering improved aerodynamics and performance. Key Features: Material: High-quality dry carbon fiber Precision Fitment: Designed for the F87 M2 chassis for a seamless integration Lightweight: Carbon fiber construction reduces weight while maintaining strength Aerodynamic Enhancement: Improves airflow and downforce for better stability Sleek Design: Carbon Fiber light weight with integrated cooling fins. Build Material: Fiber-Reinforced Polymer and Glossy Carbon Fiber Coating We encourage customers to seek professional installation since equipping these products will require the removal of parts currently installed, to better secure fitment to your vehicle
Show More Show Less
Autotecknic Carbon Fiber Rear Splash Gaurds - F97 X3M | G01 X3
Autotecknic Carbon Fiber Rear Splash Gaurds - F97 X3M | G01 X3 ...
AUTOTECKNIC - Corporate Logo
T#:21242719
Part#: BM-0302
Ships in 7 Business Days
$ 199.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Road grim, rocks, and other contaminants are no longer a concern with these Autotecknic dry carbon splash cards, made to protect your paint while also adding some carbon pop to your car! If you're adding 20" or larger wheels, AutoTecknic recommends adding this small trim piece to avoid the spray from the wider rear tires. It can be added to any F97 X3M or G01 X3 for a sporty look and provides a minor improvement in stone protection for the rear bumper.
Show More Show Less
AutoTecknic Dry Carbon Fiber Side Vent Set - F96 X6M
AutoTecknic Dry Carbon Fiber Side Vent Set - F96 X6M
AUTOTECKNIC - Corporate Logo
T#:14419864
Part#: BM-0704
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 295.00 USD
Free Shipping on orders $49 and up
Add to Wish List
There's no detail too small to customize; all enthusiasts know that any change can make a world of difference. The same is true of these AutoTecknic carbon fiber side vent sets. When it comes to carbon fiber, you're guaranteed to get a unique and lightweight design, not to mention incredibly sturdy. Leave no stone unturned when it comes to your BMW; make your vision come alive with AutoTecknic.
Show More Show Less
15cm "Muscle" Universal Fender Flares - Pair
15cm "Muscle" Universal Fender Flares - Pair
Clinched - Corporate Logo
T#:31158737
Part#: MS15
Special Order: No Guaranteed ETA
$ 330.00 USD
Add to Wish List
$ 330.00 USD
Add to Wish List
15cm "Muscle" Universal Fender Flares - Pair

15cm "Muscle" Universal Fender Flares - Pair are crafted from high-quality, impact-resistant ABS plastic, the same durable material used in OE bumpers. Designed for a universal fit, these fender flares offer both strength and lightweight performance, making them a versatile addition to various makes and models with minor customization.

  • High-Quality Material: Made from impact-resistant ABS plastic, ensuring durability and strength comparable to OE bumpers.
  • Universal Fit: Suitable for many makes and models with minor customization; can be blended with the vehicle's body or left with exposed rivets and edges.
  • Customizable Installation: Requires drilling and cutting of original fenders; installation with rivets and bolts.
  • Pliable Design: Easily heated and molded to follow factory body lines, offering flexibility compared to fiberglass flares.

Enhance your vehicle's look and protection with these high-performance fender flares.

Show More Show Less
Autotecknic Replacement Carbon Fiber Fender Gills - E70 X5M
Autotecknic Replacement Carbon Fiber Fender Gills - E70 X5M
AUTOTECKNIC - Corporate Logo
T#:21308449
Part#: ATK-BM-0207-CF
Ships in 7 Business Days
$ 250.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 250.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Autotecknic's dry carbon fiber fender trim vents for the E70 X5M are composed of a 2x2 twill weave dry carbon fiber composition. The surface is coated with a high gloss clear coat and the underlying carbon fiber overlay is laid on with meticulous care ensuring their longevity. Package includes one pair of passenger and driver side direct OEM replacement fender trim.
Show More Show Less
Suvneer Sayber Design Carbon Fiber Front Fenders - Toyota Mk5 A90 Supra
Suvneer Sayber Design Carbon Fiber Front Fenders - Toyota Mk5 A90 Sup...
Suvneer - Corporate Logo
T#:28570824
Part#: A90-SB-FENDERS
Ships in 6 Business Days
$ 1,100.00 USD
Add to Wish List
$ 1,100.00 USD
Add to Wish List
Introducing the Sayber Design A90 Fenders, a sleek and dynamic enhancement engineered to elevate the aesthetic appeal and functionality of your vehicle. Crafted with precision and innovation, these fender flares are meticulously designed to perfectly complement the contours of the vehicle's body while providing exceptional protection against debris, mud, and other road hazards. Constructed from high-quality, durable materials, the Sayber Design A90 Fenders offer superior resilience against the elements, ensuring long-lasting performance and reliability. Their robust construction not only safeguards your vehicle's exterior but also adds a touch of rugged sophistication to its overall appearance. With a seamless integration into the vehicle's design, these fender flares seamlessly blend in, creating a cohesive and unified look that enhances the vehicle's overall profile. Whether you're navigating urban streets the Sayber Design A90 Fender Flares deliver unparalleled style and functionality, making them the ideal choice for automotive enthusiasts seeking to make a bold statement on and off the road. Experience the perfect balance of form and function with the Sayber Design A90 Fender Flares – where innovation meets style to redefine your driving experience. Key Features: Material: High-quality carbon fiber (Fiber-Reinforced Polymer and Glossy Carbon Fiber Coating) Precision Fitment: Designed for the A90 chassis for seamless integration. Lightweight: Our fenders are made of high-quality carbon fiber. Aerodynamic Enhancement: Improves airflow and downforce for better stability. Sleek Design: Adds a sporty and aggressive look to your vehicle. We encourage customers to seek professional installation since equipping these products will require the removal of parts currently installed, to better secure fitment to your vehicle. Compatibility: Toyota A90 Supra 2019 - 2022
Show More Show Less
AutoTecknic Dry Carbon Fiber Side Marker Set - G80 M3
AutoTecknic Dry Carbon Fiber Side Marker Set - G80 M3
AUTOTECKNIC - Corporate Logo
T#:14419854
Part#: BM-0503-G80
Ships in 7 Business Days
$ 495.00 USD
Add to Wish List
$ 495.00 USD
Add to Wish List
High quality dry carbon fiber fender grilles for you G8X! Fits G80 M3 Includes both left and right pair
3D Design Carbon Side Vent Set - F90 M5
3D Design Carbon Side Vent Set - F90 M5
For Pre-LCI Models Only
3D Design - Corporate Logo
T#:4607296
Part#: 3303-29011
Ships in 3 Business Days
$ 595.00 USD
Free Shipping
Add to Wish List
$ 595.00 USD
Free Shipping
Add to Wish List
From 3D Design comes a pair of F90 M5 Carbon Side Vents which were designed to help your vehicle stand out even more. These vents are constructed from 2x2 weave carbon fiber and are relatively easy to install. Reuses installed side grilles.
Show More Show Less
HARD Motorsport M3-Style Fender Flares - E46 Coupe & Convertible
HARD Motorsport M3-Style Fender Flares - E46 Coupe & Convertible ...
HARD Motorsport - Corporate Logo
T#:32284521
Part#: E46FLARE2D
Ships in 10 Business Days
Starting at $ 499.00 USD
Add to Wish List
Starting at $ 499.00 USD
Add to Wish List
Give your non-M E46 COUPE or CONVERTABLE the aggressive look of the M3 with our HARD Motorsport Rivet-on Fender Flares for your E46. We created the molds directly from actual M3 fenders to allow fitment of wheel-tire combos similar to those successfully run on E46 Ms. These flares are a ready-to-go option, which will allow you to run the wider rubber you want for track days or autocross sessions. The HARD Motorsport Fender Flares are specially designed to allow you to keep your factory BMW moldings intact and to retain the classic, factory look of your car.
Show More Show Less
Genuine BMW Fender Flare - Left Rear - F15
Genuine BMW Fender Flare - Left Rear - F15
Genuine BMW - Corporate Logo
T#:188452
Part#: 51777343143
Ships in 5 Business Days
5% off MSRP $ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping
Add to Wish List
5% off MSRP
$ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping
Add to Wish List


Genuine BMW Cover, Wheel Arch, Rear Left - 20" Schwarz
This item fits the following BMW Chassis:
F15

Genuine BMW Fender Flare - Right Rear - F15
Genuine BMW Fender Flare - Right Rear - F15
Genuine BMW - Corporate Logo
T#:188453
Part#: 51777343144
Ships in 7 Business Days
5% off MSRP $ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping
Add to Wish List
5% off MSRP
$ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping
Add to Wish List


Genuine BMW Cover, Wheel Arch, Rear Right - 20" Schwarz
This item fits the following BMW Chassis:
F15

Genuine BMW Front Fender - Left - E46 323Ci 325Ci 328Ci 330Ci
Genuine BMW Front Fender - Left - E46 323Ci 325Ci 328Ci 330Ci ...
Genuine BMW - Corporate Logo
T#:73370
Part#: 41358241439
Special Order: No Guaranteed ETA
2% off MSRP $ 532.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 519.99 USD
Add to Wish List
2% off MSRP
$ 532.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 519.99 USD
Add to Wish List


Genuine BMW Side Panel, Front Left -
This item fits the following BMW Chassis:
E46

Carbon Fiber Front Fender Pair
Carbon Fiber Front Fender Pair
Genuine BMW - Corporate Logo
T#:14155773
Part#: 41352449804KT
Ships on Aug 4, 2026
$ 4,961.99 USD
Add to Wish List
$ 4,961.99 USD
Add to Wish List
Front carbon fiber fenders for the F87 M2. Includes fender liner and hardware required for installation.
5cm "Classic" Universal Fender Flares - Pair
5cm "Classic" Universal Fender Flares - Pair
Clinched - Corporate Logo
T#:28836378
Part#: CL5
Special Order: No Guaranteed ETA
$ 190.00 USD
Add to Wish List
$ 190.00 USD
Add to Wish List

5cm "Classic" Universal Fender Flares - Pair

A versatile exterior enhancement for vehicles seeking a rugged and stylish look. Crafted with durable materials, these fender flares offer increased tire coverage and protection from road debris.

  • Enhances the aesthetic appeal of the vehicle with a classic design
  • Provides additional clearance for larger tires and wheels
  • Protects the vehicle's paintwork from scratches and chips
  • Universal fitment allows for easy installation on various vehicle models
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping