Ignition

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Perfect for DIY enthusiasts, this all-in-one kit has everything you need to refresh your ignition system! With just one click, you'll get high-quality, matching replacement parts, making it simpler than ever to service and restore your ignition system.

If you're noticing misfires, poor fuel economy, reduced engine performance, or ignition-related diagnostic trouble codes (DTCs), a failing ignition coil is likely the cause. Late-model BMWs, such as the E60 M5, E63 M6, and E64 M6, use a coil-on-plug ignition system, where each cylinder has its own coil and spark plug for efficient ignition. When a coil fails, the affected cylinder won't receive a spark and will misfire. Even if the misfire doesn’t trigger a DTC, you’ll still feel the difference in engine performance—rough idling, hesitation during acceleration, or a strong fuel smell. To avoid these issues, we recommend replacing your ignition coils every 40,000-60,000 miles.

The S85's MSS65 DME uses a unique ignition system known as Ionic Current Control. BMW engineers developed this system to more accurately detect pre-ignition and misfires in the high-revving, ten-cylinder S85. Instead of relying on conventional knock sensors, the system uses each spark plug as a current probe, applying a low voltage to the electrode immediately after the power stroke and sending the resulting current to the Ionic Current Control Unit (ISS) for evaluation. This allows for precise monitoring of combustion events. To support this, the S85’s ignition coils are specially designed with a modified “pencil” shape and lack the typical Zener diode in the secondary winding, allowing for accurate current measurements without triggering fault codes in the engine control unit (DME). Bavarian Autosport ignition coils are manufactured to the exact specifications of the OE Ionic Current Control-compatible ignition coils, and will not trigger ignition-related fault codes in the DME.

Bavarian Autosport ignition coils are engineered for reliability, delivering a consistent, long-lasting spark. These high-quality OE replacement coils are specifically designed for your S85-powered E60 M5, E63 M6, or E64 M6. Constructed with durable, heat-resistant plastic and featuring premium rubber spark plug boots, each boot is pre-lubricated with dielectric grease to ensure smooth installation and prevent corrosion.

Features & Benefits:

Bavarian Autosport Ignition Coils - Set of Ten Durable, temperature-resistant plastic construction is designed to withstand extreme heat and harsh conditions, ensuring long-lasting performance. High-quality rubber spark plug boots are pre-lubricated with dielectric grease to prevent moisture intrusion and potential corrosion. Built to meet or exceed OE manufacturing standards, guaranteeing a perfect fit, reliable performance, and seamless installation. NGK 4471 LKR8AP Spark Plugs - Set of Ten Multi-ground electrodes improve ignition capability and are less sensitive to increased voltage use with gap growth. Corrugated ribs prevent flashover. Copper core aids in heat removal. Pre-gapped to 0.035" (0.9mm) OEM-specified spark plug for all S85 applications.

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Ignition components tend to wear out over years of use, including glow pugs. They may fail to maintain proper heat levels to properly ignite the fuel during cold starts and weather. By replacing the glow plugs and pre-heating unit, you can expect significantly quicker and more reliable cold starts with your M57 powered BMW.

This kit includes every thing needed to service your glow plugs including

•  6x Glow plugs
• 1x Preheating unit
• 12x intake manifold gaskets 
• 1 throttle body gasket 

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

This kit contains:

4 Beru MINI spark plugs - 12ZR6-SPP2 -1

4 Bavarian Autosport High-Performance Coils

One packet of dielectric grease (AGS)

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Elevate your engine bay aesthetics with the stunning gloss carbon fiber engine cover designed for F Chassis BMWs. This Turner carbon fiber engine cover is a quick and transformative upgrade, replacing the plain factory plastic cover on B58 engines. In just minutes, your engine bay's appearance can be revitalized. The cover retains the factory emblem, ensuring a seamless transfer from your original engine cover to the new carbon fiber one. As one of the initial modifications for a new car, this carbon engine cover provides an instant enhancement without the need for extensive disassembly.

Crafted from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the Turner B58 Carbon Engine cover boasts a factory-form fitment derived from a mold of the original engine cover. The gloss clear coat not only enhances its aesthetic appeal but also provides UV protection and extra durability. Explore the range of other carbon fiber pieces from Turner to further enhance your B58.

• Gloss carbon fiber engine cover for F Chassis BMWs
• Quick and transformative upgrade for B58 engines
• Retains factory emblem for a seamless transfer
• Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
• Gloss clear coat for UV protection and durability
• Easy installation, enhancing engine bay appearance in minutes

Set of 6 Blue Performance Ignition Coils

Upgrade your engine's performance with the Turner BMW Ignition Coils designed for efficiency and power. Modified for increased energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is essential for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a strong and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Revitalize your G Chassis B58 engine bay with the exquisite gloss carbon fiber engine cover from Turner. This carbon fiber upgrade seamlessly replaces the mundane factory plastic cover, instantly enhancing the appearance of your B58 engine. In just minutes, this Turner carbon fiber engine cover delivers a transformative aesthetic, making it one of the initial and simplest modifications for new car owners. Easily transfer the factory emblem from your original engine cover to the new carbon fiber one, marking off a key enhancement from your modification checklist.

The Turner B58 Carbon Engine cover is meticulously crafted, starting with a mold of the original engine cover to ensure optimal factory-form fitment. Constructed from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the cover is finished in a captivating gloss clear coat for UV protection and enhanced durability. Explore Turner's range of remarkable carbon fiber pieces designed to elevate your B58 engine further.

• Gloss carbon fiber engine cover for G Chassis B58 engines
• Quick and transformative upgrade for enhanced aesthetics
• Seamless transfer of the factory emblem
• Meticulously crafted for optimal factory-form fitment
• Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
• Gloss clear coat for UV protection and extra durability
• Easy installation for an instant engine bay makeover

Set of 6 Blue Performance Ignition Coils

Elevate your engine's performance with Turner BMW Ignition Coils, designed with a focus on efficiency and power. Modified to increase energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The distinctive blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is crucial for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a robust and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

ECS Tuning N54/N55 Cat-Back Exhaust for BMW E9X Take your 335i or 335xi to the next level with a high-performance cat-back exhaust designed to invigorate your driving experience. Constructed from premium brushed stainless steel, this ECS cat-back exhaust isn’t just about cutting weight—it’s about delivering unrestrained performance with a refined, yet powerful tone. Expect a thrilling soundtrack that underscores every shift and acceleration, giving you that much-needed connection to the road.

This exhaust system is crafted with balance in mind, providing a potent sound without the excessive drone that disrupts highway cruising. Designed for the N54 and N55 engines, it integrates seamlessly with both stock and aftermarket downpipes. Featuring twin 2.5” mandrel-bent pipes and turbo-style mufflers, this exhaust offers increased flow, weight savings, and a deep, exhilarating tone that complements the BMW’s high-output turbocharged engine.

Why Upgrade?

Better Sound and Flow: A dual 2.5” mid-pipe setup leads back to lightweight, turbo-style mufflers. Designed for unrestricted flow, the exhaust enhances horsepower, torque, and throttle response. Signature Tips: Complete with dual black chrome 3.5” tips, this system not only sounds incredible but looks the part, too. Weight Savings: Shedding 37% of the weight, this exhaust replaces the heavy factory cat-back and lightens your load to support a sportier feel. Improved Performance: Reduced backpressure for smoother, more responsive acceleration. Precision Engineering

Design Technology: Using FARO ARM laser scanning and SolidWorks 3D CAD, this system is built for an exact fit. High-Quality Materials: T304 stainless steel construction with 1.25mm wall thickness, TIG-welded for durability. OEM Fitment: Stainless steel hangers are welded in OE locations for a seamless, factory-quality installation. Adjustability: Strategic slip joints make adjustments easy, so you achieve the ideal alignment for your setup. What’s Included?

Dual 2.5” mid-pipes and rear exhaust section High-flow turbo-style mufflers Complete mounting hardware and clamps Black chrome 3.5” exhaust tips Turner Motorsport Performance Ignition Coils

Boosted Performance: Enhanced spark energy translates to a stronger and more reliable combustion cycle. Direct Fitment: Engineered for seamless installation with your BMW’s ignition system. Distinctive Turner Blue: Adds a stylish touch to your engine bay, making it look as good as it performs. Benefits at a Glance

Enhanced Exhaust Sound: Deeper, more aggressive note with minimized cabin drone. Lighter Build: 37% lighter than stock for added agility. Free Ignition Coils: Improved spark for consistent performance and fuel efficiency. Performance Ready: Fully compatible with both OEM and aftermarket setups. Turn heads, enjoy the ride, and make the most out of your BMW’s power with this ECS Tuning N54/N55 Cat-Back Exhaust and Turner Ignition Coil combo—built for enthusiasts who demand the best in performance and style.

Transform the appearance of your engine bay with the G Chassis S58 Carbon Engine and ECU Covers from Turner. These carbon fiber covers are a striking upgrade for the S58, replacing the plain factory plastic engine and ECU covers in just minutes. As one of the initial modifications for a new car, these covers offer an easy way to enhance the G80 M3 or G82 M4 without extensive dismantling.

The ECU cover is a direct replacement, while the engine cover allows for the transfer of the factory "M" badge and grommets. Crafted with meticulous attention, the Turner S58 Carbon Engine and ECU covers start with molds of the original components to ensure optimal factory-form fitment. Made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, they boast a glossy clear coat for UV-protection and enhanced durability. Explore Turner's range of carbon fiber pieces to further elevate your G80 M3 or G82 M4.

Set of 6 Blue Performance Ignition Coils

Receive a complimentary set of 6 Blue Performance Ignition Coils with your purchase of the G Chassis S58 Carbon Engine and ECU Covers. Engineered for performance and efficiency, Turner BMW ignition coils are modified to increase energy output, resulting in a faster, more efficient, and consistent burn. The distinctive blue housing not only enhances performance but also adds a unique aesthetic to your engine. Ensure your engine's health, performance, and efficiency by choosing Turner Ignition Coils for a robust and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

F87 M2 N55 Race-Inspired Catback Exhaust System

Ready to transform your N55-powered M2 into a track-inspired machine? The Turner Motorsport Catback Exhaust delivers a lightweight, high-flow design that enhances both power and exhaust tone. Unleash a bold, aggressive sound that matches the intensity of your M2, revealing the full sonic and performance potential of the twin-scroll turbo N55 engine.

BMW enthusiasts know the thrill of owning an M2 with the N55, but the stock exhaust system can mute its character, especially as it warms up. The Turner Catback exhaust brings this engine to life with unrestricted flow and minimized weight, making every throttle response feel sharper, and every acceleration, thrilling. Perfect for the driver who wants the raw, unfiltered power of the N55 without the cost premium of the M2 Competition model.

Engineered for Power and Flow

Turner’s engineers crafted this catback exhaust to minimize weight and maximize airflow, using a true 3.0-inch stainless steel front section and straight-through rear piping. By removing factory restrictions, they’ve created an exhaust system that significantly improves performance, reduces back pressure, and delivers a sport-tuned sound that’s equally exhilarating on the track and the road. Weighing just 28 lbs, it offers a significant 27 lb reduction over the OEM exhaust, amplifying your M2's agility and responsiveness.

Sound Optimization: The N55 comes alive with this race-inspired exhaust, delivering a fierce tone that announces your arrival. Explore sound clips on the ECS Tuning YouTube Channel. High-Quality Materials: Constructed from T304 stainless steel, this exhaust is TIG-welded for enhanced durability, while the slip joints and precision mandrel bends ensure an exact fitment. Performance-Built: The quad 4.0-inch brushed exhaust tips complete the aggressive look while helping to enhance airflow, resulting in improved horsepower and torque. Features and Benefits

Motorsports-inspired exhaust tone 27 lb weight reduction for enhanced performance Free-flow design reduces back pressure for optimal torque and power gains Quad exit tips with a striking brushed finish Straightforward bolt-on installation with OEM mounting points Kit Includes

3.0" front section, direct fit to factory downpipe Lightweight midsection for better flow and sound "Race Inspired" rear exhaust section Quad 4.0" brushed exhaust tips Necessary clamps and hardware for seamless installation Optional Exhaust Pipe Hanger Removal Pliers Turner Motorsport Performance Ignition Coils

For top-tier spark and efficiency, the Turner Performance Ignition Coils deliver! Boosting energy output, these ignition coils provide a consistent, efficient spark, maximizing fuel burn and optimizing performance. Engineered with Turner’s signature blue housing, they look as good as they perform.

Features and Benefits

Enhanced ignition performance Perfect fitment for N55 engines Signature Turner Blue finish for a distinctive engine bay upgrade