On several BMWs, rear control arms are a weak point. Turner Motorsport stocks a variety of replacement front control arms for your BMW. We recommend looking into the OE options we offer to save you money on your maintenance so you have more left over for performance parts!
This category contains parts that fit the following chassis:
The control arm keeps the lower wheel straight and in contact with the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement. This replacement control arm is the perfect option to restore your BMW's handling and get back on the road.
Show More Show Less
If the control arm bushings on your vehicle are beginning to fail, it will become quickly apparent. Suspension noise will be drastically increased and the entire car will have an all-around looser feel. This can also lead to premature tire failure as alignment is negatively affected. Replace your control arm bushings to give your entire suspension a tighter feel.
Show More Show Less
The rear wishbone links the chassis to the suspension, maintaining accurate wheel alignment, stability, and improved handling for a more comfortable ride.
Within as few as 50,000 miles, the rear control arms on your vehicle can begin to creak, groan, and compromise stability on the road. Worn bushings in the control arms may fail to maintain proper alignment, causing your vehicle to "wander" at highway speeds due to excessive play. Replacing the control arm bushings is the only way to restore your vehicle’s original ride quality and handling performance.
Show More Show Less
Over time, road conditions like potholes, speed bumps, and other hazards can take a toll on your suspension, leading to weakened performance and a less stable ride. Replacing worn components as needed is essential for improving safety and enhancing ride comfort. Control arms are a key part of this system. After years of use, their non-serviceable ball joints and other elements can deteriorate. Since these components cannot be replaced individually, replacing the entire control arm is often the best solution.
Show More Show Less
Meyle rear upper control arm. Over the years, the road takes a serious toll on your suspension. Pot holes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience, change components as they wear to improve safety and ride comfort. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. Thread SizeM12x1,5 Length [mm]212 mm Comparable OE Cross Reference - 33326779387 33326795047
Show More Show Less
The control arm is a key component that may require replacement after years of service. Non-serviceable ball joints and other parts can wear out over time, and since these components cannot be replaced individually, the entire control arm must be replaced.
Show More Show Less
Keep your vehicle’s suspension in top condition without replacing the entire control arm assembly! This kit includes four bushings (two per side) and all necessary hardware.
Restore the performance and comfort of your BMW’s suspension with the Meyle - Rear Upper control arm - right and enjoy sharper handling, better ride quality, and long-term dependability.
The control arm ensures your wheel stays aligned and maintains proper contact with the road. If you've been in an accident or your bushings are failing, replacement is the only solution. Why not opt for the same high-quality part your vehicle was originally equipped with?
Show More Show Less
The control arm keeps the lower wheel straight and contacting the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement. Why not replace it with the same part that originally came on your vehicle?
Show More Show Less
A control arm bushing minimizes vibrations and facilitates smooth motion between the control arm and the vehicle's frame or suspension, improving ride comfort and handling stability.
The Meyle 316 050 0203 Suspension Control Arm is a premium-grade replacement component tailored for the rear suspension of select BMW applications. Precision-engineered to restore factory handling and stability, this arm is manufactured from robust sheet steel, delivering strength and long-lasting performance under demanding conditions. **Product Highlights:** - **Fitment Location:** Rear Axle – Left & Right - **Construction:** Stamped Sheet Steel - **Type:** Transverse Control Arm - **Service Note:** Replace in pairs to ensure even wear and optimal function - **Cross Reference:** BMW OE# 33306878037 Would you like this reformatted for use in a product listing?
Show More Show Less
When control arms fail, they often cause vibrations and shaking through the steering wheel, which worsen with speed or braking. Additional symptoms can include clunking noises from the suspension, poor steering alignment, and uneven or rapid tire wear.
Show More Show Less
Over time, road conditions like potholes, speed bumps, and other hazards can take a toll on your suspension, leading to weakened performance and a less stable ride. To enhance your driving experience, it’s important to replace worn components, ensuring improved safety and comfort. One critical component to address is the control arm. After extended use, the non-serviceable ball joints and other parts can wear out. Since these components cannot be replaced individually, the entire control arm must be replaced to restore proper suspension function.
Show More Show Less
Over time, your suspension takes a beating from potholes, speed bumps, and everyday road hazards. This wear can lead to a loose, unresponsive ride. Replacing worn suspension parts as needed helps restore ride quality and safety. One key component to consider is the control arm—after years of use, its built-in ball joints and bushings can wear, compromising handling and performance.
Show More Show Less
The road can take a significant toll on your suspension system. Potholes, speed bumps, and other road hazards can lead to a weakened, sloppy suspension over time. After years of use, the control arm's non-serviceable ball joints may wear out, resulting in less precise steering, wobbling, or clunking noises when turning. Replacing worn components restores safety, ride comfort, and enhances your driving experience. When replacing parts of your front or rear suspension, it’s best to replace them in pairs (both left and right sides) or inspect other components prone to wear. This approach ensures maximum service life from replacement parts and maintains proper performance across your suspension system.
Show More Show Less
As your vehicle ages, rubber components begin to break down, allowing excess movement in the components that require a firm mounting point the most. The camber link allows fine adjustment of the rear camber. When the camber link bushings fail, the rear camber adjustment is compromised. The result is a loose feeling in the rear end, excessive tire wear, and a sacrifice in handling.
Show More Show Less
The control arm ensures the lower wheel remains aligned and in contact with the road. If your vehicle has been in an accident or the bushings are starting to fail, replacement is the only solution. Opt for a replacement part identical to the original to maintain your vehicle's performance and reliability.
Show More Show Less
Over time, everyday road conditions like potholes, speed bumps, and other hazards can significantly impact your suspension, leading to a loose and weakened ride quality. To enhance your driving experience, replace worn components as needed to ensure optimal safety and comfort. One key component to address is the control arm. After years of use, its non-serviceable ball joints and other parts can wear out. Since these components cannot be replaced individually, the only solution is to replace the entire control arm assembly.
Show More Show Less
Over time, roads take a toll on your suspension, with potholes, speed bumps, and other hazards contributing to a weakened and less responsive system. Replacing worn components as needed is crucial for maintaining safety and ride comfort. One key component to address is the control arm. After extended use, the non-serviceable ball joints and other parts may wear out. Since these components cannot be replaced individually, the entire control arm must be replaced to restore optimal performance.
Show More Show Less
The control arm bushing reduces vibration and facilitates smooth motion between the control arm and chassis, enhancing suspension function and ride quality.
The control arm keeps the lower wheel straight and contacting the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement. Why not replace it with the same part that originally came on your vehicle?
Show More Show Less
Meyle rear upper control arm. Over the years, the road takes a serious toll on your suspension. Pot holes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience, change components as they wear to improve safety and ride comfort. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. Thread SizeM12x1,5 Length [mm]212 mm Comparable OE Cross Reference - 33326796001 33326770969
Show More Show Less
Meyle brand wishbone. Mounts from the rear axle carrier to the trailing arm : also know as the control arm MEYLE-ORIGINAL: True to OE. Fitting Position Upper, Fitting Position Rear Axle Left, Fitting Position Rear Axle Right, Trailing Arm, Sheet Steel
Show More Show Less
The control arm bushing reduces vibration and facilitates smooth motion between the control arm and chassis, enhancing suspension function and ride quality.
The Meyle Rear Right Upper Control Arm (part number 33326861120, Meyle reference 316 050 0156) is a high-quality replacement designed for the BMW 640i xDrive Gran Turismo (G32). Crafted to maintain proper rear suspension alignment, it enhances both handling precision and ride comfort. With pre-installed rubber bushings, it allows for easy installation while effectively absorbing road vibrations. Built to meet or exceed OEM standards, this control arm delivers lasting durability and reliable suspension performance—ideal for restoring vehicle stability and comfort.
Show More Show Less
Upgrade your suspension with Meyle HD control arm bushings — built with reinforced materials for longer life and superior performance. They offer OE fitment with enhanced durability for both daily and spirited driving.
Show More Show Less
The Meyle Rear Left Upper Control Arm (part number 33326861119, Meyle 316 050 0155) is a high-quality replacement tailored for the BMW 640i xDrive Gran Turismo (G32). Designed to maintain proper rear suspension geometry, it ensures confident handling and a smooth driving experience. Pre-installed rubber bushings allow for easy installation while effectively absorbing road vibrations. Manufactured to meet or exceed OEM standards, this control arm offers long-lasting reliability and is perfect for restoring suspension function and driving comfort.
Show More Show Less