Fluids

Liqui Moly Top Tec 4600 Synthetic Engine Oil (5w-30) - 1 Liter

Upgrade your BMW's performance with Liqui Moly Top Tec 4600 Synthetic Engine Oil (5w-30) - 1 Liter, exclusively from Turner Motorsport. This oil is optimal for modern gasoline and diesel engines featuring multi-valve technology, Valvetronic, and turbocharging, whether with or without charge air cooling. It's specially formulated to meet the demands of heavy-duty engines and extended oil change intervals. Suitable for gas-powered vehicles (CNG/LPG), it's also rigorously tested and approved safe for catalytic converters and turbochargers.

Key Benefits:

• Ideal for modern engines with advanced technologies
• Suitable for long intervals between oil changes
• Perfect for heavy-duty engine requirements
• Compatible with gas-powered vehicles (CNG/LPG)
• Tested and approved safe for catalytic converters and turbochargers

Approvals:

• ACEA C2, ACEA C3
• API SN
• BMW Longlife-04
• GM dexos2
• MB-Freigabe 229.31, MB-Freigabe 229.51, MB-Freigabe 229.52
• VW 505 00, VW 505 01

Liqui Moly also recommends this product for vehicles requiring specifications such as Fiat 9.55535-S3, Ford WSS-M2C 917-A, Opel GM-LL-A-025, and Opel GM-LL-B-025.

500ml HP600 Race Brake Fluid is specifically formulated to deliver superior performance under extreme racing conditions, where braking systems must endure very high temperatures without failure. This premium DOT 4 brake fluid from Hawk Performance exceeds OE specifications and offers exceptional stopping power and reliability.

• Premium DOT 4 Fluid: Surpasses OEM specifications for enhanced performance.
• High Boiling Points: Minimum dry boiling point of 572°F (300°C) and wet boiling point of 383°F (195°C) ensure optimal performance under extreme conditions.
• Race-Ready: Designed for high-performance racing applications, delivering consistent braking power.
• Enhanced Safety: Higher dry boiling point reduces the risk of brake fluid vaporization, providing reliable stopping power.

For racers and high-performance driving enthusiasts, this brake fluid is essential for maintaining optimal braking performance and safety.

Experience superior engine protection with BMW TwinPower Turbo Longlife-04 SAE 5W-30, crafted with advanced GTL technology. This premium engine oil exceeds industry standards, ensuring your BMW engine stays clean and operates at its full potential. Compared to conventional oils, it offers enhanced viscosity and temperature stability, boosting fuel efficiency and overall engine performance. Thoroughly tested and approved, this oil is ideal for use in BMW engines under all temperature conditions.

Key Benefits:

Consistent Performance: Maintains stability across a wide range of temperatures and engine loads. Reliable Cold Starts: Ensures dependable engine starts even in low temperatures. Superior Wear Protection: Provides excellent defense against wear and tear. Advanced Active Treatment: Patented technology prevents deposits and corrosion, extending engine life.

Experience the power of Cataclean, an EPA-approved solution designed to comprehensively clean your BMW's engine, fuel system, and exhaust. This patented formula targets carbon build-up while revitalizing oxygen sensors, fuel injectors, and cylinder heads. Compatible with gasoline, diesel, and hybrid engines, Cataclean ensures peak engine performance without altering fuel composition. Independent emissions testing has shown significant reductions in hydrocarbon emissions, making it a trusted choice for engine maintenance. Utilize Cataclean regularly to address drivability issues, enhance catalytic converter efficiency, and extend your vehicle's lifespan. With its easy-to-use design, simply pour and go every three months to keep your BMW running smoothly.

• EPA Approved formula
• Easy-to-use application every 3 months
• Compatible with capless gas tanks
• Safe for gasoline, diesel, and Hybrid engines
• Reduces hydrocarbon emissions by up to 50%
• Restores catalytic converter, oxygen sensors, fuel injectors, and cylinder heads
• Legal in all 50 states
• Patented formula
• Improves fuel efficiency and MPG
• Features COEX-HDPE bottle for increased strength and no evaporation

This is Red Line's latest synthetic transmission fluid that is compatible with BMW's MTF-LT3 transmission fluid. This is the transmission fluid used in both manual and automatic transmissions since the mid-2000's. To confirm, check the decal located on the side of your transmission. Price is per quart.

Synthetic D6 ATF is a lower viscosity version of the D4ATF and is designed for better fuel efficiency in CAFE testing. Dexron VI requires a different approach to a conventional ATF formulation. Rather than beginning with a 7.5 cSt fluid and allowing a viscosity loss in use to drop to 5.5 cSt, the Dexron VI fluid requires a starting viscosity of less than 6.4 and a final drop to no less than 5.5 cSt. Red Line D6 will drop to no less than 6.1 cSt. Since the final viscosity after use of these fluids are similar, Dexron VI fluids can be used where Dexron III fluids were previously recommended (with the exception of some manual transmission applications, our customers report).

D6 ATF also provides significantly improved gear protection and will provide a GL-4 level of gear protection. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Suitable replacement for the following BMW part numbers: BMW ATF 3 BMW ATF 3+ 83220142516 (M-1375.4) 83222152426 (M-L12108) 83220432807 83220397114 MTF-LT-3 83222289720 83222305397 ZF Lifeguard 6/6 PLUS 8 ZF6/8

Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 1 Liter for your BMW

Upgrade your BMW with Turner Motorsport's Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 1 Liter. This top-class fully synthetic, low-SAPS motor oil features the latest additive technology, ensuring superior performance and efficiency in modern gasoline and diesel vehicles, whether equipped with or without particulate filters (GPF / DPF). It guarantees the lowest friction and outstanding protection even under tough operating conditions in high-performance engines.

Key Benefits:

• Outstanding lubrication reliability
• Rapid oil penetration
• Excellent high-pressure and wear protection properties
• Prevents the build-up of deposits
• Outstanding engine cleanliness
• Optimum stability to aging
• Reduces fuel consumption
• Compatible for use with turbochargers and catalytic converters

Specifications and Approvals:

• ACEA C3, API SN
• BMW Longlife-04 (LL-04) - Backwards compatible with Longlife-98 (LL-98) and Longlife-01 (LL-01)
• MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52
• Porsche C40
• VW 511 00

Recommended for Specifications:

• GM dexos2
• MB 226.5
• Renault RN 0700, Renault RN 0710

Specifically developed for selected gasoline and diesel engines of the latest generation. Tested safe with catalytic converters and turbochargers. Depending on the manufacturer's instructions, extended oil change intervals can be achieved.

Founded more than 50 years ago, Liqui Moly GmbH from Ulm in southern Germany offers a wide variety of high-quality products including motor oils, additives, car care products, and chemically-based technical solutions for automotive applications. Liqui Moly develops and tests its products in its own laboratories, manufactures only

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.�

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!� MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Technical Specifications:�

Density at 15�C - .855kg/cm3
Viscosity at 40�C - 80.7mm�/s
Viscosity at 100�C - 14.0mm�/s
Viscosity Index - 180
Flash Point - 230�C
Recommended for the following oil and manufacturer specifications:

ACEA A3
ACEA B4
API SN
API CF
Porsche A40
Renault RN 0700
VW 502.00
VW 505.00