Dinan BMW Intake Parts

This intercooler improves performance by increasing thermal efficiency, keeping your car cool in a wider variety of conditions, as well as prolonging turbocharger life and decreasing cool-down time after hard running. Even on a stock car, this intercooler can add additional horsepower due to its increased volume and efficiency.

• Max gains of 7 HP and 5 lb-ft of torque on a stock car.
• Face area  278% larger than the stock intercooler setup for maximum cooling efficiency to deter heat soak.
• Charge Air Pressure drop: 0.80 PSI (69% improvement over stock)
• Charge Air Temperature drop: 193º F (9% improvement over stock)
• Charge Air Temperature / Ambient Temperature Delta: 25º F @ 6250 RPM (39% improvement over stock)

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Dinan's Cold Air Intake system for the F06/F13 M6 adds two additional intake snorkels to complement the factory intake ducts to the airboxes (a total of 4 intake ducts feeding air into the engine). Dinan studied the aerodynamics and packaging of the front end to determine where additional intakes can take in air. New airbox covers incorporate carbon fiber air ducts that run to the top of the radiator support where it gets a ram-air effect from the front grilles. The new airbox cover and piping are designed with a composite material that blocks hot air. A K&N high flow air filter that has 77% more surface area than stock sits in the new airbox. Dinan has shown peak gains of 13hp and 9ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6

Transform the M550i/M850i engine bay with the Dinan carbon fiber intake system and enjoy added top end power, improved throttle response as well as an overhauled visual appearance that embodies the raw strength of the stout V8 motor!

To propel these hefty, yet capable, luxury vehicles, a large volume of air is required to be fed into two powerful turbochargers. The stock airboxes that provide this air utilize restrictive panel filters and artificially limit air volume. With a few small tweaks, however, a more efficient system with increased flow capacity that yields more power can be achieved. That is exactly what Dinan has done with the revised and improved carbon fiber cold air intake system for the M550i and M850i. Retaining the factory lower boxes for simplicity but enlarging the air box lids via the removal of the unused "U" channels afforded the opportunity to be able to not only increase volume by 54%, but also allowed the use of bespoke high-flow cone filters with 22% more surface area than the factory panel filters. The improvements continue down the intake tract with the enlarged volume of air transitioning into an organically shaped intake pipe that grants a more natural and unhindered flow path into the turbo. The combination of these improved features means the engine is allowed to ingest more cold air with less restriction resulting in top end gains of +17 WHP / +18 ft-lbs of torque.

Performance aside, the cosmetics of the system have also undergone a massive makeover and now showcase a luxurious 2x2 gloss carbon weave instead of the lifeless black plastic seen in stock trim. The natural shapes/lines that were integrated to improve flow dynamics are extended beyond the engineering of the kit and are on full display outwardly as well. The muscular form offers a not-so-subtle reminder to the might the potent powerplant can, and will, deliver. Get yours, and 'flex the flow.'

Features:

More Power: Max gains of 17 WHP and 18 lb-ft of torque @ 5500 RPM without additional modifications Improved throttle response Outflows factory intake Larger volume air box (54% larger than stock) for increased breathability 34% increase in filter area (stock: 76.3in², Dinan: 102.1in²) for optimum flow Sealed system ensuring only colder outside air is utilized Quick and easy installation

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan S65 intake. Dinan improves on the factory air box system by using a larger K&N filter combined with a precision molded carbon fiber intake tube. The increased amount of air feeds the engine and elicits a slightly more audible and sporty tone over its stock counterpart. Dinan claims 8hp and 5ft-lb torque gain with this kit.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: Convertible models require modification to a factory chassis brace. Detailed instructions are included.

*NOT CARB APPROVED 

This item fits the following BMWs:
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

When modifying the car and increasing boost, installing an upgraded intercooler is essential to keep the engine computer from restraining boost as temperatures climb. The stock air-air intercooler is quickly overcome with heat and can't keep the intake air cool enough. If it's too hot the engine computer will reduce power to safer levels. A Dinan intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines. The E92/E93 335i Dinan intercooler is 93% larger than stock but is a direct replacement with only minor trimming of plastic undertrays required for installation. The factory charge piping in and out of the intercooler is re-used.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The intercooler is worth 2 points towards your Dinan badge.

This item fits the following BMWs:
2007-2010 E92 BMW 335i 335xi - Coupe
2007-2010 E93 BMW 335i - Convertible