Find Parts That Fit Your Vehicle

BMW Intake Parts

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

AFE - Corporate Logo
T#:1943
Part#: 55-10460
In Stock
$ 21.00 USD
Free Shipping on orders $49 and up

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Show More Show Less
AFE - Corporate Logo
T#:35121147
Part#: 31-10328
In Stock
$ 76.00 USD
Free Shipping on orders $49 and up
Featuring three layers of oil-free synthetic media, the Pro DRY S air filter is our most maintenance-friendly performance filter. Its tough polyurethane frame and innovative progressive bump seal design provide exceptional durability and hassle-free installation.
Show More Show Less
Alta Performance - Corporate Logo
T#:23615472
Part#: AMPTAC100
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up

Elevate your Mini Turbo Models, including Cooper S and JCW, with the ALTA BOV Spring Upgrade. This replacement spring offers a cost-effective, high-performance solution for your stock Blow Off Valve (BOV). By holding more boost between shifts, it significantly reduces turbo lag, enhancing overall performance. The carefully designed stiffer spring ensures normal BOV operation while maintaining increased pressure in the boost tubes, preventing power gaps.

  • Simple and cost-effective upgrade for improved turbo response
  • Reduces turbo lag between shifts, boosting overall performance
  • Designed with a custom-made heat-treated 17-7 Stainless Steel Spring
  • Rated for over 7,000,000 cycles for long-lasting durability
  • Holds and vents up to 40psi efficiently
Show More Show Less

aFe Throttle Body Spacer - E36 M3
CARB certified for sale in all 50 states
AFE - Corporate Logo
T#:189816
Part#: 46-31004
EO#: D-550-11
In Stock
$ 139.00 USD
Free Shipping on orders $49 and up
The Silver Bullet throttle body spacer creates turbulence in the air flow just prior to entry into the engine increasing horsepower, torque and improving throttle response. In recent dyno testing by aFe, this throttle body spacer produced +4hp and +8lbs. x ft. torque (measured on E36 M3 with S52 engine) . The Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. Great power per dollar performance.

This item fits the following BMWs:
1995-1999  E36 BMW  M3
Show More Show Less

AFE - Corporate Logo
T#:35121142
Part#: 30-10328
In Stock
$ 71.00 USD
Free Shipping on orders $49 and up
The Pro 5R air filter provides up to 34% more airflow than the stock filter, using factory-oiled media to enhance performance. Its tough polyurethane frame and advanced progressive bump seal design ensure durability and easy installation.
Show More Show Less

AFE - Corporate Logo
T#:48401506
Part#: 30-10438DM
In Stock
20% off MSRP $ 266.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 213.00 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 266.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 213.00 USD
Free Shipping on orders $49 and up
Washable, reusable high-flow OE replacement air filter with oil-free Pro DRY S synthetic media and durable polyurethane frame. Designed to replace restrictive stock filters on 2020–2025 BMW X5/X6 M, M Competition, M60i, X7 M60i, Alpina XB7, and XM models with the 4.4 L V8, it boosts airflow, sharpens throttle response, and traps dust efficiently while remaining low-maintenance and oil-free.
Show More Show Less
Alta Performance - Corporate Logo
T#:22756708
Part#: AMPINT201BK
In Stock at Vendor
$ 339.99 USD
Free Shipping on orders $49 and up

Elevate your car's performance with the ALTA Cold Air Box, precision-crafted from laser-cut aluminum sheet metal and expertly CNC bent to perfection. This airbox is not only a performance enhancer but also a protector, thanks to its durable black texture powder coating, offering long-term protection with an OEM-inspired appearance.

Key Benefits of the ALTA Cold Air Box:

  • Seals to the underside of the hood, shielding the intake airstream from under-hood heat.
  • Enhances your car's engine tone with a throaty, deep sound upon throttle, showcasing its modified nature.
  • Allows you to hear your supercharger's whine, whether stock or aftermarket.

The high-flow foam filter included with the ALTA Cold Air Box is designed to reduce intake restriction and increase the surface area for clean air ingestion. Unlike cotton and gauze filters, foam filters offer multi-layer filtration, trapping dirt at various levels. This results in improved particulate restriction without compromising horsepower as the filter accumulates dirt.

The ALTA Cold Air Intake System for R53 6-speed manual is available in black or red texture powder coating, allowing you to customize the appearance to your preference.

Show More Show Less

AFE - Corporate Logo
T#:26738320
Part#: 50-70060D
In Stock
$ 479.00 USD
Free Shipping on orders $49 and up
Eliminate your restrictive stock intake with this performance intake system from aFe Power! This intake is designed to provide significantly higher airflow to your engine and turbos, allowing for greater power potential. Dyno-Proven Gains up to +9 HP & +10 Lbs. x Ft. TQ Outflows Factory Intake by 10% Measured Flow: 325 CFM @ 7” H20 Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Three Layer Performance Air Filter: This 6” tall 360-degree radial flow air filter features a 4-1/2” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Aluminum Heat-Shield Panel: A durable aluminum heat-shield panel is designed to keep the hot engine air away from the intake housing. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation. Fitment Note: This item will not fit vehicles that comply with BMW RDE (Real Driving Emissions) statutes. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less

AFE - Corporate Logo
T#:2119671
Part#: 50-70061D
In Stock at Vendor
$ 479.00 USD
Free Shipping on orders $49 and up
Features & Specifications: Dyno-Proven Gains up to +11 HP & +11 Lbs. x Ft. TQ Outflows Factory Intake by 3% Measured Flow: 150 CFM @ 7” H20 Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Three Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. BMW Strut Brace: The Momentum intake is designed to fit with the factory strut brace, with no modification necessary. Dyno-Tuned Intake Tube: This system features a high-quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Aluminum Heat-Shield Panel: A durable aluminum heat-shield panel is designed to keep the hot engine air away from the intake housing. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent-pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less
AFE - Corporate Logo
T#:637597
Part#: 54-13053D
In Stock
$ 410.00 USD
Free Shipping on orders $49 and up
This Stage 2 cold air intake system produces 9 max horsepower, 8 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.
Show More Show Less
Alta Performance - Corporate Logo
T#:31423672
Part#: AMPENG303RD
In Stock at Vendor
$ 34.99 USD
Free Shipping on orders $49 and up

MINI R52 R53 Intercooler Couplers Red - Pair offer a stylish and practical upgrade for your MINI's intercooler system. These high-temperature silicone couplers replace the OEM rubber connectors on either side of the intercooler, addressing common issues such as lost horsepower, decreased fuel economy, and poor drivability.

The MINI R52 R53 Intercooler Couplers Red - Pair provide the following benefits:

  • Enhanced Durability: Made from high-temperature silicone to withstand extreme conditions and prevent cracking.
  • Improved Performance: Replaces thin rubber connectors that can degrade over time, ensuring a more reliable seal and optimal intercooler function.
  • Stylish Upgrade: Available in vibrant red, adding a touch of color to your engine bay.
  • Versatile Fit: Compatible with both stock and aftermarket intercoolers.
  • Easy Installation: Designed for straightforward replacement with no modifications required.
Show More Show Less


Alta Performance - Corporate Logo
T#:23383303
Part#: AMPINT201RD
In Stock
$ 339.99

This product was last offered at the strikethrough price on
10-01-2026

$ 297.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 339.99

This product was last offered at the strikethrough price on
10-01-2026

$ 297.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

ALTA Cold Air Intake System, specially designed for the R53 6-speed manual. Crafted from laser-cut aluminum sheet metal and precision CNC bent, this intake system ensures perfection in form and function. Finished with a durable black texture powder coating, it not only offers long-term protection but also delivers an OEM appearance.

The airbox of the ALTA Cold Air Intake seals to the underside of the hood, effectively preventing under-hood heat from infiltrating the intake airstream. This enhancement ensures cooler, denser air intake, resulting in improved engine performance. With the ALTA intake system, your BMW will produce a distinct throaty, deep tone on throttle, accentuating its modified nature. Additionally, it amplifies the sound of your supercharger, whether stock or aftermarket.

Featuring a high-flow foam filter, this intake system significantly reduces intake restriction while expanding the surface area for the engine to intake clean air. Unlike cotton or gauze-type filters, the foam-based filter facilitates multi-layer filtration, effectively trapping dirt at various levels. This superior filtration capability results in improved particulate restriction without compromising horsepower, even as the filter accumulates dirt.

Benefits:

  • Precision-crafted aluminum construction for durability
  • Under-hood heat prevention for cooler, denser air intake
  • Enhanced engine performance and modified engine tone
  • High-flow foam filter for reduced intake restriction
  • Multi-layer filtration without compromising horsepower
Show More Show Less
AFE - Corporate Logo
T#:48401508
Part#: 30-10438RM
In Stock
20% off MSRP $ 255.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.00 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 255.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.00 USD
Free Shipping on orders $49 and up
The AWE 30‑10438RM is a high-flow Magnum FLOW Pro 5R OE replacement air filter engineered to outperform stock while maintaining a perfect seal. Its pre-oiled, five-layer cotton gauze media allows your BMW’s V8 to ingest more air without letting dust in, making it ideal for street or track use. This direct-fit filter works on 2020–2025 BMW X5/X6 M, M Competition, M50i/M60i, X7 M60i, Alpina XB7, and XM models with the 4.4 L V8, delivering sharper throttle response, increased power potential, and reusable, long-lasting performance.
Show More Show Less
AFE - Corporate Logo
T#:588193
Part#: 30-10299
In Stock at Vendor
$ 71.00 USD
Free Shipping on orders $49 and up
With up to a 45% increase in flow over stock, this Pro 5R air filter features factory-oiled media for maximum performance. Its progressive bump seal design and polyurethane frame makes it extremely durable and simple to install. Washable and Reusable for Multiple Cleaning Cycles Pro 5R Filter Media Features Five Layers of Progressive Oiled Cotton Gauze for Maximum Performance Deep, Open Pleats Allow for Increased Surface Area, Flow, and Dust Holding Capacity
Show More Show Less

AFE - Corporate Logo
T#:204879
Part#: 54-12489-C
Ships in 3 Business Days
$ 338.00 USD
Free Shipping on orders $49 and up
The Dynamic Air Scoop (D.A.S.) from aFe is a very simple bolt-on product that increases airflow and velocity into the air intake through the factory kidney bean grille. This scoop is constructed of carbon fiber for reduced weight, greater strength and aggressive styling. This scoop is a perfect addition to a cold air intake installation.

Lower Intake Air Temperature:
Dynamic Air scoops lower intake air temperatures by forcing more cool air from the front grille into the factory intake snorkel.

Carbon Fiber D.A.S Scoop:
This Dynamic Air Scoop is constructed with lightweight high gloss clear-coated 2 x 2 Twill Weave Carbon Fiber For Heat Protection.

Hassle Free Installation:
All necessary hardware is included for an easy, hassle free installation.

This item fits the following BMWs:
2012+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe
Show More Show Less

AFE - Corporate Logo
T#:641179
Part#: 57-10004R
Ships in 3 Business Days
$ 773.00 USD
Free Shipping on orders $49 and up
Deliver more cool air to your BMW’s engine and reap the reward of better performance and an aggressive, not overpowering, turbo whistle. Dyno-Proven Gains up to +11 HP & +21 Lbs. x Ft. TQ Outflows Factory Intake by 44% Measured Flow: 650 CFM @ 7” H20 Lightweight, 100% Carbon Fiber Intake Tube Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Five Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that pulls in air from the front of the vehicle and minimizes warm engine air, for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It connects to the vehicle’s factory air inlet with no additional hardware. Carbon Fiber Intake Tube: The lightweight tubes are computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, they feature zero fiberglass and are clear-coated for the highest quality construction. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent-pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less

AFE - Corporate Logo
T#:3283360
Part#: 56-70037D
Ships in 3 Business Days
$ 435.00 USD
Free Shipping on orders $49 and up
$ 435.00 USD
Free Shipping on orders $49 and up
DETAILS: Dyno-Proven Gains up to +12 HP & +14 Lbs. x Ft. TQ Outflows Factory Intake by 23% Measured Flow: 325 CFM @ 7” H20 Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Three Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Toyota Strut Brace: The Takeda intake is designed to fit with the factory strut brace, with no modifications necessary. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum intakes are designed with fewer parts for a fast and easy installation. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less
AFE - Corporate Logo
T#:599404
Part#: 58-10005SC
Ships in 3 Business Days
$ 338.00 USD
Free Shipping on orders $49 and up
Improve your airflow path by directly replacing your restrictive factory inlet ducts with our larger carbon fiber air scoops. Lightweight, 100% Twill Weave Carbon Fiber Construction Snaps Into Factory Inlet Ducts and Mounts Onto V-Support Brace w/ No Extra Hardware Set of Two (Driver and Passenger Side), Visible Behind Grilles for an Aggressive Look
Show More Show Less

AFE - Corporate Logo
T#:21867192
Part#: 54-10468-N
Ships in 3 Business Days
$ 134.00 USD
Free Shipping on orders $49 and up
The Dynamic Air Scoop (D.A.S.) from aFe is a very simple bolt-on product that increases airflow and velocity into the air intake through the factory kidney bean grille. This scoop is constructed of lightweight powder-coated aluminum for reduced weight, greater strength and unique styling. This scoop is a perfect addition to a cold air intake installation. Lower Intake Air Temperature: Dynamic air scoops lower intake air temperatures by forcing more cool air from the front grille into the intake snorkel. Lightweight Aluminum D.A.S Scoop: This Dynamic Air Scoop is constructed with lightweight aluminum for strength and finished off by a powder-coated finish. Hassle-Free Installation: All necessary hardware is included for an easy, hassle-free installation. Fits: 1999-2006 BMW 323i/ci (E46) L6-2.5L M52 1999-2006 BMW 328i/ci (E46) L6-2.8L M52 1999-2006 BMW 330i/ci/xi (E46) L6-3.0L M54 2001-2006 BMW 325i/ci/xi (E46) L6-2.5L M54 2001-2007 BMW M3 (E46) L6-3.0L S54 Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less

AFE - Corporate Logo
T#:48401500
Part#: 30-10431DM
Back Ordered
20% off MSRP $ 223.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 179.00 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 223.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 179.00 USD
Free Shipping on orders $49 and up
A direct-fit, high-flow filter designed to ditch the restrictive factory element on 2023–2024 BMW G8X M2, M3, and M4 models running the S58. Its durable synthetic media feeds the engine more air while blocking debris, delivering sharper throttle response and long service life with zero oiling required. Reusable, efficient, and built for both street pulls and track days — a clean, effortless breathing upgrade for your Bavarian powerhouse.
Show More Show Less
AFE - Corporate Logo
T#:28171500
Part#: 30-10422R
Ships in 3 Business Days
$ 91.00 USD
Free Shipping on orders $49 and up

aFe POWER performance air filters utilize a rounded, evenly spaced pleat design that maximizes the usable filter surface area, resulting in increased airflow and greater dust retention capacity. The pliable sealing surface of these filters conforms seamlessly to varying filter housing shapes, ensuring a perfect fit and sealing surface without the need for additional gaskets or sealants.

Constructed with a durable 360-degree polyurethane frame, aFe POWER flat panel performance air filters maintain their original molded shape even after multiple heat cycles in the engine bay, unlike other materials that may degrade over time.

Featuring five layers of pre-oiled cotton gauze media, these filters deliver maximum performance with their progressive layering that allows consistent airflow even when dirty. Ideal for both street and track use, these Pro 5R filters can be easily rejuvenated with aFe's POWER CLEANER and blue air filter oil.

With a substantial increase in flow capacity compared to stock filters, the Pro 5R air filter offers factory-oiled media for optimal performance. Its progressive bump seal design and resilient polyurethane frame ensure durability and straightforward installation.

Show More Show Less
AFE - Corporate Logo
T#:193549
Part#: 54-12399
Back Ordered
$ 49.00 USD
Free Shipping on orders $49 and up
$ 49.00 USD
Free Shipping on orders $49 and up
Our new intake boot for E36 M3 with S52 engine and 3.5" Euro HFM retains the stock ASC option while providing a full diameter tube to connect the HFM to the throttle body. Often the 3.5" HFM is used with the a reducer to fit onto the stock intake boot. This upgraded intake boot does not use the reducer which results in greater air flow to the throttle body.

This upgrade kit retains the ASC throttle body when upgrading to a 3.5" EURO MAF sensor. This coupling upgrade was designed to work with aFe’s P/N: 51-12392 / 54-12392, but it can also be used with other competitors intakes. The coupling is constructed of polyurethane for strength and durability. This engineered coupling upgrade increases air flow and velocity by controlling the air intake dynamics. This is a very simple bolt-on product and requires no cutting or drilling.

This item fits the following BMWs:
1996-1999 E36 BMW M3, M3 convertible
Show More Show Less


AFE - Corporate Logo
T#:588194
Part#: 31-10299
Back Ordered
$ 76.00 USD
Free Shipping on orders $49 and up
This Pro DRY S air filter features three layers of oil-free synthetic media, making it aFe's easiest to maintain performance air filter. With a progressive bump seal design and polyurethane frame, it is also extremely durable and simple to install. Washable and Reusable for Multiple Cleaning Cycles Pro DRY S Filter Media Features Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience Deep, Open Pleats Allow for Increased Surface Area, Flow, and Dust Holding Capacity
Show More Show Less
AFE - Corporate Logo
T#:359505
Part#: 54-76306
Ships in 3 Business Days
$ 435.00 USD
Free Shipping on orders $49 and up
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Show More Show Less
AFE - Corporate Logo
T#:28171504
Part#: 30-10422D
In Stock
$ 97.00 USD
Free Shipping on orders $49 and up

aFe POWER performance air filters are designed with rounded, evenly spaced pleats that increase the usable filter surface area, enhancing airflow and dust retention capabilities. The flexible sealing surface of these filters adapts to varying filter housing shapes, ensuring a perfect fit and sealing surface without the need for gaskets or sealants. This design also ensures the filter always returns to its original form.

Constructed with a full 360-degree polyurethane frame, aFe POWER flat panel performance air filters maintain their shape even after multiple heat cycles in the engine bay, unlike materials that may degrade over time.

Featuring three layers of oil-free synthetic media, these filters require no oil during maintenance, providing maximum convenience. The progressive layering of the media offers excellent filtration efficiency and dust-holding capacity, making them ideal for street use. Pro DRY S filters can be easily rejuvenated with aFe's POWER CLEANER.

Offering maximum protection and significant performance enhancements, these filters feature a simple drop-in design for easy installation.

Show More Show Less

AFE - Corporate Logo
T#:27871803
Part#: 31-10174
Ships in 3 Business Days
$ 76.00 USD
Free Shipping on orders $49 and up

AFE - Corporate Logo
T#:584566
Part#: 54-13032CC
In Stock
$ 88.00 USD
Free Shipping on orders $49 and up
Magnum FORCE Stage-2 Carbon Fiber Trim Piece BMW M3/M4 (F80/82/83) 15-19 I6-3.0L S55
AFE - Corporate Logo
T#:10714259
Part#: 57-10026R
Ships in 3 Business Days
$ 750.00 USD
Free Shipping on orders $49 and up
$ 750.00 USD
Free Shipping on orders $49 and up
With carbon fiber components, impressive power gains, and the increased sound of the spooling turbo, the Track Series was made for performance enthusiasts like you. Dyno-Proven Gains up to +13 HP & +18 Lbs. x Ft. TQ Outflows Factory Intake by 34% Measured Flow: 335 CFM @ 7” H20 Lightweight, 100% Carbon Fiber Intake Tube and Air Filter Top Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Five Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. This Track Series air filter uniquely features a 100% twill weave carbon fiber top. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less

AFE - Corporate Logo
T#:35121148
Part#: 35-10024C-MB
Ships in 3 Business Days
20% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 91.00 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 91.00 USD
Free Shipping on orders $49 and up
The Pro DRY S air filter, with three layers of oil-free synthetic media, is our easiest performance filter to maintain. Its robust polyurethane frame and advanced progressive bump seal design offer outstanding durability and effortless installation.
Show More Show Less
AFE - Corporate Logo
T#:6523723
Part#: 50-70068D
In Stock
$ 435.00 USD
Free Shipping on orders $49 and up
Up to +10 HP & +19 Lbs. x Ft. TQ ~2018/2019 ON+ Check MAF Sensor as this LCI has a Slanted base design sensor part for the mount to the tube housing. SEE PHOTO COMPARISON PICTURE ON ITEM.

AFE - Corporate Logo
T#:31522901
Part#: 30-10174
Ships in 3 Business Days
$ 71.00 USD
Free Shipping on orders $49 and up

Alta Performance - Corporate Logo
T#:31291029
Part#: AMPINT106
In Stock at Vendor
$ 59.99 USD
Free Shipping on orders $49 and up

MINI R55 to R61 Foam Filter Panel features high-flowing, super-cleaning foam media that enhances air intake efficiency while maintaining excellent dirt-holding capacity. This advanced design allows for a thinner filter with double the volume compared to the OEM intake box, promoting superior airflow and performance.

The MINI R55 to R61 Foam Filter Panel offers several key benefits:

  • Enhanced Airflow: The foam media enables more air to be drawn across the entire filter, improving overall engine performance.
  • Increased Volume: Provides up to twice the volume of the OEM intake box, allowing the intake system to breathe more freely.
  • Consistent Performance: Unlike OEM and K&N filters, which can lose horsepower as they clog, the foam media continues to flow effectively even when full of dirt.
  • Improved Horsepower: Maintains maximum horsepower between filter cleanings, ensuring sustained engine performance.
Show More Show Less
Alta Performance - Corporate Logo
T#:31390566
Part#: AMPINT300BK
In Stock at Vendor
$ 249.99 USD
Free Shipping on orders $49 and up

MINI R52 R53 Cold Air Intake System Automatic - Black is engineered to enhance your MINI's performance with a sleek and durable design. The ALTA Cold Air Box is meticulously crafted from laser-cut aluminum sheet metal and CNC bent for precision. Finished in a rich black texture powder coating, it offers long-term protection and a stylish OEM look. This airbox seals tightly to the underside of the hood, preventing under-hood heat from contaminating the intake airstream.

With the ALTA intake system, your vehicle will produce a deep, throaty tone under throttle, making the presence of your supercharger unmistakable. The high-flow foam filter improves airflow and increases the surface area for clean air intake, featuring multi-layer filtration for superior dirt capture without reducing horsepower as it accumulates dirt.

The ALTA Cold Air Intake System consistently delivers a 10-12 WHP gain and is available in black or red texture powder coating.

  • Made from laser-cut aluminum and CNC bent for precision
  • Rich black texture powder coating for durability and OEM look
  • Seals to the underside of the hood to prevent heat contamination
  • Produces a deep, throaty engine tone
  • High-flow foam filter with multi-layer filtration for superior dirt capture
  • Proven 10-12 WHP gain
  • Available in black or red texture powder coating
Show More Show Less


AFE - Corporate Logo
T#:31357387
Part#: 51-12712
Ships in 2 Business Days
$ 354.00 USD
Free Shipping on orders $49 and up

MINI R60 R61 Magnum FORCE Pro DRY S Stage-2 Intake System delivers impressive performance gains and efficiency. Designed to enhance engine power, this intake system offers the following benefits:

  • +18 HP / +20 lbs. x ft. Torque Max Gains: Significant improvements in horsepower and torque.
  • 49% Increase in Airflow: Outflows the factory intake for better performance.
  • Pro Dry S Oil-Free Filter: Washable and reusable for maximum convenience and minimal maintenance.
  • 2.75" Mandrel-Bent Aluminum Tube: Wrinkle-black powder-coated for improved volumetric efficiency and performance.
  • Powder-Coated One-Piece Housing: Utilizes stock mounting locations for a clean, secure fit.
  • Clear Coated Anodized Aluminum Cover: Adds a stylish touch to your engine bay.
  • No Cutting or Drilling Required: Easy installation with no modification to OEM parts.
Show More Show Less
Alta Performance - Corporate Logo
T#:31622528
Part#: AMPINT300RD
Ships in 5 Business Days
$ 191.99 USD
Free Shipping on orders $49 and up
AFE - Corporate Logo
T#:42907345
Part#: 21-91074
Ships in 3 Business Days
21% off MSRP $ 106.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.00 USD
Free Shipping on orders $49 and up
21% off MSRP
$ 106.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.00 USD
Free Shipping on orders $49 and up
The perfect solution for BMW drivers looking to upgrade their intake system with a low-maintenance, high-performance filter that delivers proven results in airflow, filtration, and long-term reliability.
Show More Show Less

AFE - Corporate Logo
T#:3283359
Part#: 56-70037R
Ships in 3 Business Days
$ 420.00 USD
Free Shipping on orders $49 and up
$ 420.00 USD
Free Shipping on orders $49 and up
DETAILS: Dyno-Proven Gains up to +13 HP & +16 Lbs. x Ft. TQ Outflows Factory Intake by 30% Measured Flow: 345 CFM @ 7” H20 Washable and Reusable Pro 5R Air Filter for Maximum Performance Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Five Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Toyota Strut Brace: The Takeda intake is designed to fit with the factory strut brace, with no modifications necessary. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum intakes are designed with fewer parts for a fast and easy installation. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less

AFE - Corporate Logo
T#:5677368
Part#: 57-10017R
Ships in 3 Business Days
$ 750.00 USD
Free Shipping on orders $49 and up
$ 750.00 USD
Free Shipping on orders $49 and up
Features: Dyno-Proven Gains up to +26 HP & +27 Lbs. x Ft. TQ Outflows Factory Intake by 53% Measured Flow: 505 CFM @ 7” H20 Lightweight, 100% Carbon Fiber Intake Tube Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less
AFE - Corporate Logo
T#:5788164
Part#: 46-20548-B
Ships in 3 Business Days
$ 354.00 USD
Free Shipping on orders $49 and up
Directly replace your BMW’s restrictive plastic charge pipe with aFe's BladeRunner free-flowing, heat-resistant aluminum pipes. Outflows the Factory Charge Pipe by up to +19% Constructed from TIG-Welded 2-1/4 to 2-3/4" Aluminum Tubing Features Factory Style Quick-Connect With an O-Ring Seal Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps and 5-Ply Silicone Couplings Direct Fit Install with No Modifications Required 1/8" NPT Ports are Provided for Connecting Sensors or Water Methanol Injection Powder Coated Wrinkle Black for Heat and Corrosion Resistance
Show More Show Less

AFE - Corporate Logo
T#:26738321
Part#: 50-70060R
Ships in 3 Business Days
$ 462.00 USD
Free Shipping on orders $49 and up
Eliminate your restrictive stock intake with this performance intake system from aFe Power! This intake is designed to provide significantly higher airflow to your engine and turbos, allowing for greater power potential. Dyno-Proven Gains up to +13 HP & +14 Lbs. x Ft. TQ Outflows Factory Intake by 15% Measured Flow: 340 CFM @ 7” H20 Washable and Reusable Pro 5R Air Filter for Maximum Performance Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Five Layer Performance Air Filter: This 6” tall 360-degree radial flow air filter features a 4-1/2” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Aluminum Heat-Shield Panel: A durable aluminum heat-shield panel is designed to keep the hot engine air away from the intake housing. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation. Fitment Note: This item will not fit vehicles that comply with BMW RDE (Real Driving Emissions) statutes. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less
AFE - Corporate Logo
T#:58818985
Part#: 31-10099
Ships in 3 Business Days
New Item
20% off MSRP $ 95.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 76.00 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 95.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 76.00 USD
Free Shipping on orders $49 and up
This aFe Pro Dry S drop-in air filter uses a non-woven synthetic material. It offers increased airflow for improved horsepower and torque, and is washable and reusable for extended service.

AFE - Corporate Logo
T#:7953040
Part#: 50-70083D
In Stock at Vendor
$ 808.00 USD
Free Shipping on orders $49 and up
Features a custom CAD-designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. This system uses a high-quality plastic CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Dyno-Proven Gains up to +11 HP & +13 Lbs. x Ft. TQ Outflows Factory Intake by 29% Measured Flow: 605 CFM @ 7” H20 Washable and Reusable Pro DRY S Air Filters for Maximum Convenience Clear Sight Windows for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Three Layer Performance Air Filters: The 6-1/2” tall 360-degree radial flow air filters feature a 3-1/2” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Unique One-Piece Housings: The smooth one-piece sealed housings, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. Large, clear sight windows allow for hassle-free filter inspection, without having to disassemble your system. Dyno-Tuned Intake Tubes: This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Made from XLPE material and high-performance silicone, the intake tubes provide heat-soak resistance and extreme durability. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This item is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less

AFE - Corporate Logo
T#:35121182
Part#: 50-70105D
Back Ordered
$ 479.00 USD
Free Shipping on orders $49 and up
**Large Three-Layer Performance Air Filter:** This 6-1/2" tall, 360-degree radial flow air filter with a 5-1/2" round flange incorporates our oil-free Pro DRY S media, featuring three synthetic layers for maximum convenience. Its progressive layering ensures excellent filtration efficiency and dust-holding capacity without the need for oils, making it ideal for street and light off-road use. **Advanced One-Piece Housing:** Made from heat-resistant XLPE (cross-linked polyethylene) polymer, the smooth, one-piece sealed housing features our patent-pending filter-to-housing interface. A large clear sight window allows easy filter inspection without system disassembly. **Dyno-Tuned Intake Tube:** This high-quality, computer-designed, dyno-tuned intake tube is engineered to maximize power gains while maintaining a precise fit. Constructed from heat-resistant XLPE material, it offers exceptional durability and resists heat soak. **Simple Installation:** Using factory mounting points, this intake system reduces the need for extra hardware, ensuring an exact fit with each install. Its innovative design, featuring our patent-pending filter-to-housing interface, requires half the parts of traditional cold air intake systems. **Premium Components:** Equipped with stainless-steel worm clamps for added strength and a high-quality silicone coupling to provide flexibility and durability.
Show More Show Less
Alta Performance - Corporate Logo
T#:23416517
Part#: AMPINT401RD
In Stock
$ 283.99 USD
Free Shipping on orders $49 and up
Upgrade your Mini Cooper S with the Alta Performance Cold Air Intake (AMPINT401RD). This intake system is meticulously designed to enhance engine performance by optimizing airflow and increasing horsepower. Crafted specifically for the Mini Cooper S, it replaces the stock intake system, providing improved throttle response and a more aggressive engine sound. The Alta Performance Cold Air Intake features durable construction and high-quality materials, ensuring long-lasting performance and reliability. Elevate your driving experience with this high-performance intake system designed to unlock the full potential of your Mini Cooper S.
Show More Show Less


AFE - Corporate Logo
T#:391158
Part#: 46-20230AS
Back Ordered
$ 52.00 USD
Free Shipping on orders $49 and up

Reinforced Silicone:
These couplings feature high temperature 5-Ply polyester reinforced silicone material which meet or exceed SAEJ20 Standard.

Durable Couplings:
Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipe or other equipment break.

Note: This coupling kit fits aFe intercooler tube (46-20239-B, 46-20229-B/R, 46-20222-B) Only.

Show More Show Less
AFE - Corporate Logo
T#:14155789
Part#: 57-10017D
Ships in 3 Business Days
$ 773.00 USD
Free Shipping on orders $49 and up
With 53% flow increases and a +26 horsepower gain, this intake not only performs well but also looks the part. Made out of 100% carbon fiber, this intake is very lightweight and also washable thanks to the Pro Dry S air filter. The installation is almost as simple as it is to say that there is no better intake option for your car!
Show More Show Less