Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as our other popular silicone hose products, this OE replacement elbow offers enhanced durability and performance.

• Direct bolt-on OE replacement. No modifications required.
• OE part is not available from MINI
• Four-ply 100% silicone construction.
• Eliminates OE hose failure caused by age, environmental exposure, heat, and high boost pressure.
• Easy to install with basic hand tools.
• Comes with two stainless steel lined hose clamps.

Perfect for high-performance MINIs running increased boost, this M7 Speed Cold Side Lower Intercooler Elbow is designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure. The kit includes one silicone elbow and two high-quality lined stainless steel clamps. Currently available only in BLACK, this elbow is easy to install by any moderately skilled DIY car enthusiast using basic hand tools.

Enhance your Generation 2 MINI Cooper's cooling system with the M7 Speed Cold Side Lower Intercooler Elbow. Crafted from top-quality four-ply 100% silicone material, this OE replacement elbow offers superior durability and performance over the factory rubber part. Its mandrel tooling construction ensures a smoother and larger bend compared to the stock elbow. Engineered to withstand up to 58 PSI [4.0 BAR] of charge air pressure, it's an ideal fit for high-performance MINIs running increased boost. This kit includes one silicone elbow and two high-quality stainless steel clamps, offering a hassle-free installation process for DIY enthusiasts using basic hand tools.

• Direct bolt-on OE replacement with no modifications needed.
• OE-quality four-ply 100% silicone construction ensures enhanced durability.
• Resistant to age, environmental exposure, heat, and high boost pressure.
• Simple installation using basic hand tools.
• Kit includes two stainless steel-lined hose clamps.

Enhance your Mini's performance with this brand new replacement air filter element designed for the M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and the R56 AGS-R Ram Air System. Pre-oiled for convenience, it comes with a new clamp, making installation a breeze. Improve airflow and maintain optimal engine efficiency with this high-quality air filter element.

• Direct replacement for M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and R56 AGS-R Ram Air System
• Pre-oiled for immediate use
• Includes new clamp for hassle-free installation
• Enhances airflow for improved engine performance
• Maintains optimal engine efficiency

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

M7 Speed proudly introduces its new 100% silicone four-ply fiber reinforced intake hose, designed specifically for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly better airflow, and an almost unlimited service life. It not only performs exceptionally well but also adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out from other similar products by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This feature ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and straightforward installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed for MINIs with the N18 turbocharged engine. This direct OE replacement part provides superior durability, improved airflow, and an almost limitless service life. Plus, its sleek design adds an impressive under-hood WOW factor.

Key Features:

• Retains OE PCV connection location and size for seamless installation without modifications.
• No disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code).
• Complete kit with three stainless steel clamps and easy-to-follow installation instructions.
• Includes correct resistor pack to avoid CEL issues.
• Made from 100% silicone, resistant to oil and most chemicals.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber-reinforced construction for maximum strength and durability.
• 33% larger inside flow volume compared to the stock part.
• Smooth inner surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN).
• Sizes: 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

M7 Speed Silicone Intake Hose for N14 Turbocharged MINIs

Elevate your MINI's performance and style with the M7 Speed 100% silicone four-ply fiber reinforced intake hose. This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds the coveted under-hood WOW factor that MINIs need.

M7 Speed proudly introduces its newly developed intake hose designed for all MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose ensures a seamless integration into your MINI's engine bay while providing exceptional performance.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size. This means you can install it without any modifications, ensuring no disruption to the PCV electrical connection and eliminating the risk of initiating a DTC code (Check Engine Light). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions for hassle-free setup.

Crafted from 100% silicone materials resistant to oil and most chemical damage, this intake hose is designed for high-temperature continuous service up to 300°F (149°C). Its four-ply fiber reinforced construction ensures maximum strength and durability. With no modifications or cutting required for installation, this hose offers a 33% larger inside flow volume compared to the stock part, promoting better airflow to the turbocharger.

Key Features:

• Direct OE replacement part
• Superior durability
• Improved airflow
• Virtually unlimited service life
• Retains stock PCV connection location and size
• Easy DIY installation
• Available in four standard M7 colors
• Dimensions: 2.75” (70mm) ID at the MAF sensor, 1.97” (46mm) ID at the turbo inlet

Upgrade your Mini's performance with the M7 Speed COLD SIDE Intercooler Elbow Kit paired with the HOT SIDE Charge pipe in striking BLACK color. This comprehensive intercooler pipe kit optimizes airflow, ensuring maximum flow and minimal pressure drop from the turbo to the throttle body. Crafted from premium four-ply fabric reinforced 100% silicone material, this kit not only boosts power and throttle response but also enhances the under-hood aesthetics of your vehicle. By replacing OE parts, it eliminates high boost failures and removes the OE hose side muffler and cold side sound chamber for improved throttle response and increased mid-range to top-end power. The kit includes six high-quality lined stainless steel clamps, providing a complete solution for installation using basic hand tools.

• Maximizes airflow for increased power
• Improves throttle response and mid-range to top-end power
• High-quality four-ply fabric reinforced 100% silicone material
• Enhanced under-hood appearance
• Eliminates OE hose side muffler and cold side sound chamber
• Complete kit for easy installation with basic hand tools

Upgrade Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It also offers a matching set for your engine bay.

This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Besides outstanding performance, it looks super cool and adds the under hood WOW factor that MINIs need.

M7 Speed Silicone Intake Hose

M7 Speed proudly introduces its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose provides exceptional durability, improved airflow, and a long service life.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This design prevents disruption to the PCV electrical connection, eliminating the risk of a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.

Note: This part fits only MINIs with the N18 R60 R61 turbocharged engine and a single large PCV vent hose connecting the intake hose to the cam cover. The kit also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL issues.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as other popular M7 silicone hose products, this OE replacement elbow offers enhanced durability and performance.

Key Features:

• Direct factory OE replacement with no modifications required
• Smooth and larger bend compared to the convoluted molded rubber OE part
• Resistant to age, oil reaction, high boost applications, and environmental damage
• Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure
• Includes one silicone elbow and two high-quality lined stainless steel clamps
• Easy installation with basic hand tools
• Currently available only in BLACK

Upgrade your MINI's performance with the M7 Speed Cold Side Lower Intercooler Elbow, designed to replace the OE rubber elbow prone to failure over time. With its durable silicone construction and easy installation, this elbow is perfect for high-performance MINIs running increased boost.

M7 Pre-Intercooler Charge Pipe for MINI

Upgrade your MINI's performance with the M7 Pre-Intercooler Charge Pipe, a silicone hose designed to replace the stock piping between the turbocharger's outlet and the intercooler's inlet. Unlike OEM parts that feature restrictive piping and baffles, this charge pipe ensures uninterrupted airflow for enhanced turbocharger sound and performance.

Benefits:

• Smooth inner walls and mandrel bends allow uninterrupted airflow
• Enhances turbocharger sound for a more exhilarating driving experience
• Dyno-tested gains of 3.6 horsepower and 11.3 ft-lb of torque at the wheels
• Available in BLACK, RED, and BLUE to complement your MINI's engine bay
• Proudly made in the USA for quality assurance

Upgrade your B48/B46 JCW engine MINI Cooper with the FTP Charge Pipe for enhanced performance and reliability. This aluminum pipe replaces the factory plastic pipe, offering increased durability and resistance to boost pressure. With a larger piping size, it reduces turbulence and maximizes airflow into the engine, resulting in improved engine efficiency and power output. Experience direct replacement and enjoy a smoother, more responsive driving experience with the FTP Charge Pipe.

• Increases flow and improves reliability
• Replaces brittle factory plastic pipe
• Reduces turbulence for maximum airflow
• Direct replacement for easy installation