Sport / Lowering Springs

Z4 sDrive M40i:
Front Lowering: -1.0"
Rear Lowering -.8"

Z4 sDrive30i:
Front Lowering: -1.3"
Rear Lowering -1.0"

Enhance the look of your BMW G14 M850i xDrive with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.

This item fits the following BMWs:
2019+ G29 BMW Z4 sDrive 30i M40i

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1/2" (12mm)
  
• R: 0" (0mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2007-2013 E92 BMW 335i 335is 335xi - Coupe

Elevate the performance of your BMW with Turner Motorsport Performance Springs, designed to reduce body roll and enhance handling. These springs feature increased spring rates for improved grip and a slight lowering to lower the vehicle's center of gravity without sacrificing street usability or comfort. Experience reduced dive under braking and squat under acceleration for a more controlled driving experience. Here are the key benefits:

• Reduced body roll for tighter handling
• Decreased dive under braking
• Enhanced grip for improved performance
• 1/2" front lowering without compromising rear comfort
• Preset to prevent spring sag
• Shot-peened for stress relief and durability
• Worth 2 points toward your Dinan badge

For over 35 years, Turner Motorsport has been at the forefront of BMW tuning, offering meticulously developed and tested parts that preserve the original driving feel while enhancing performance. Backed by a four-year, 50,000-mile warranty, Turner Motorsport ensures quality and reliability in every product.

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1/2" (12mm)
  
• R: -0.0" (0mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2007-2011 E90 BMW 335i - Sedan

Upgrade your MINI’s performance with the H&R spring set, designed to enhance handling and control while maintaining a smooth ride. These high-quality springs lower your MINI, providing a sportier stance and improved driving dynamics without compromising comfort. Crafted from premium-grade steel, they are built to last and offer a noticeable improvement over stock springs.

• Enhanced Handling: Improves control and responsiveness for a sportier driving experience.
• Comfortable Ride: Provides handling benefits while minimizing impact from road bumps.
• Durable Construction: Made from high-grade steel for long-lasting performance.
• Vehicle-Specific Fit: Precisely engineered for MINI models to ensure perfect fitment.

Specifications:

• R57 Lowering: 1.2 inches front / 1.1 inches rear
• R58 / R59 Lowering: 1.3 inches front / 1.2 inches rear

F30/F32 RWD Lowering Springs:

Take your driving performance to the next level with ECS Tuning’s exclusive lowering springs for F30/F32 RWD models. These springs are engineered to optimize your car’s handling and visual appeal by lowering the ride height and delivering an aggressive, race-inspired stance. With an average drop of up to 1.8", you’ll experience sharper cornering, reduced body roll, and enhanced steering precision—all without sacrificing daily comfort.

Key Features:

Front Lowering: 1.6" - 1.8" Rear Lowering: 1.4" - 1.6" Lower Center of Gravity: Improves cornering stability and reduces body roll EDC Compatibility: Works seamlessly with electronic damping systems Linear Spring Design: A perfect balance of ride comfort and performance Durable Finish: Black powder coating with signature Turner red accents Proudly Made in the USA Unlike harsh coilover systems, our lowering springs provide a firmer yet comfortable ride, retaining street-friendly drivability while enhancing performance. Designed to bridge the gap between factory suspension and extreme coilovers, ECS springs are your ideal choice for performance tuning without compromise.

Flush Fitment Kit – Complete Your Look:

Achieve the perfect stance with our included flush kit. Push your wheels out for that aggressive, wide-body look while enhancing your handling with improved grip in corners. This kit includes 5mm front spacers and 15mm rear spacers with extended black wheel bolts, ensuring seamless integration with your OE-style wheels.

Elevate both your performance and aesthetics with ECS Tuning’s lowering springs and flush kit combo for your F30/F32. Don’t miss out on this special offer!

• Improved handling performance & chassis dynamics
• Reduced body roll & understeer
• Superb comfort and ride quality
• Dynamic stance with optimal wheel gap
• Lightweight, high-strength construction
• Compatible with BMW adaptive suspension
• Made in USA at ISO 9001 certified facility