Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. 

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Genuine BMW Rear Swing Support -
This item fits the following BMW Chassis:
F01,F02,F06,F10,F12,F13

NM Engineering Adjustable Rear Sway Bar Links for MINI

Enhance your MINI's performance and handling with NM Engineering Adjustable Rear Sway Bar Links. These high-quality links are designed to optimize your driving experience. Say goodbye to the factory plastic links that might not meet the demands of your upgraded anti-sway bar. NM Engineering's All-Metal Sway Bar Links offer superior performance and durability.

Key Features:

• Heavy-duty ball joints with Teflon® lining
• Stainless Steel Spacers
• Grade 10.9 Trailing Arm Bolts

The NM Engineering Sway Bar Links are a significant improvement over factory plastic links. They offer the following benefits:

• Replace weak factory plastic links
• Provide direct feedback from the sway bar
• Adjustable to 15mm shorter than the factory length for extreme suspension drops
• Compensate for sway bar pre-load from poorly manufactured sway bars (uneven arms)

Upgrade your MINI's suspension and experience improved handling and control with NM Engineering Adjustable Rear Sway Bar Links.

Lowering your BMW does wonders for appearance and handling, but it also changes suspension geometry in ways that can hurt performance. As ride height changes, angles between the sway bar, control arms, and axles shift, which can cause binding, poor fitment, and added stress on the factory fixed-length end links. This is especially noticeable on cars equipped with coilover suspension, where slight height differences side to side can preload the sway bar and lead to inconsistent handling.

Our team of dedicated BMW enthusiasts set out to remedy this common issue with a set of Adjustable Rear Sway Bar End Links. Designed with performance in mind, they offer a fully adjustable range from 100mm to 120mm, helping eliminate preload, restore proper suspension alignment, and improve overall sway bar function. Constructed from high-quality billet aluminum, these end links are built to outlast the factory cast components and are finished with a black anodized coating for excellent corrosion resistance. Laser-etched wrench size markings allow for quick, easy adjustments while installed on the vehicle. Unlike the factory design, these end links use spherical rod ends at the control arm for increased responsiveness and a more direct handling feel. A unique knurled bushing design also ensures compatibility with the OEM sway bar, offering a first-to-market solution for enthusiasts looking to retain factory components.

Features & Benefits:

Adjustable from 100mm to 120mm Strong 6061-T6 billet aluminum construction Black anodized finish resists corrosion Spherical rod ends improve response and handling feel Polyurethane bushing with knurled bore helps retain grease Fits factory rear sway bars on E23, E24, E28, E30, and E36 Laser-etched markings for quick and easy adjustments

Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with these High Performance Adjustable End Links. 

Product Features:

• Designed for the BMW E90/E92 & E82.
• High articulation ball ends for maximum range of motion
• Front Length Range: 11.5 in. /- 0.5 in.
• Rear Length Range: 6.375 in. /- 0.5 in
• Optimum end link alignment on lowered cars.
• Increased sway bar effectiveness.
• Increased end link strength.

Fits the following BMW's:
2008-2013 E82 BMW 128i 135i
2006-2012 E90/2 BMW 328i 335i

The MMX Performance adjustable drop links are a great choice for any lowered or hard-driven BMW to zero the pre-load on your anti-roll bar geometry. Plus, by replacing the stock rubber joints with motorsport-spec ball joint ends, you'll add valuable stiffness and precision to handling and steering dynamics.

The sway bar end link attaches the front anti-roll bar ends to the front damper. The OEM links were made the length they are for a reason, to complement the standard ride height.

When your ride height is altered, your vehicle's anti-roll bar ends are pulled up. With around 40mm of adjustable length, plus left and right threaded ends for easy length adjustment, the MMX adjustable sway bar end links allow you to adjust back to zero preload on your anti-roll bar - allowing it to operate exactly as it should once again.

Motorsport-spec ball joint ends using high-strength Teflon-lined steel means a much more direct response when turning into corners. By replacing the soft rubber bushing in the factory links with these motorsport-spec ball joints, cornering and steering responses are immediately sharpened. Importantly, rubber dust boots are fitted to protect the joints from road dirt and salt accumulation.

The lightweight CNC-machined T6-6061 aluminum bodies are anodized in our beautiful MMX gloss black coating to look good and stay looking good.

Features:

Manufactured in the UK from Aircraft grade T6-6061 aluminum billet.

Complete OE replacements

Anodized in signature MMX Gloss black.

Heavy-duty ball joints to ensure a long life span.

325-365mm adjustment range.

Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with these High Performance Adjustable End Links. 

Product Features:

• Designed for the BMW E90/E92 & E82.
• High articulation ball ends for maximum range of motion
• Front Length Range: 11.5 in. /- 0.5 in.
• Optimum end link alignment on lowered cars.
• Increased sway bar effectiveness.
• Increased end link strength.

Fits the following BMW's:
2008-2013 E82 BMW 128i 135i
2006-2012 E90/2 BMW 325i 328i 335i/is

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM Lemförder sway bar links are the perfect option to restore body control and eliminate knocking noises.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Genuine BMW Front Swing Support -
This item fits the following BMW Chassis:
F01,F02,F06,F10,F12,F13

There are a lot of enthusiasts still committed to the E30 3-series. For these owners, giving up their 318, 325, or M3 is out of the question. We've tried to make it harder for them to part with their cars by developing reinforcements for common weak areas of the E30 chassis. With these pieces, you can prevent a costly repair or total failure that could cost you lots of money. These are a must-have for any E30 restoration (yes, restoration is the right word these days) or even during normal suspension work. Included in this package are reinforcements for:

• front subframe
• rear sway bar / swaybar tabs (from trunk floor)
• rear lower sway bar tab (on trailing arm)
• optional front sway bar tab (M3 only)

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3

Lemforder is a supplier of parts directly to BMW and other major automotive manufacturers. In order to save on the cost of parts, we are able to provide you these parts directly from Lemforder at a much lower cost than if bought directly from BMW. These parts have the same high quality and reliability, just without the BMW logos.

This item fits the following BMW Chassis:
E30 M3,E30

Elevate Your Suspension with Versatile and High-Quality Components

Transform your vehicle's suspension performance with these essential components. Designed to cater to a wide range of suspension setups, they serve as both high-quality OE-replacement parts and robust upgrade options. Whether you prefer a lowered suspension or maintain a stock setup, these components are indispensable. Their versatile design allows for easy adjustments, ensuring they meet your unique suspension requirements.