Find Parts That Fit Your Vehicle

BMW Cooling System Parts & Accessories

The cooling system is arguably the weakest point in numerous BMWs. If you drive an aging BMW or plan on taking your car to the track like we do, we recommend beefing up your cooling system before going to the track. Generally, the main components in your cooling system that are prone to failure include the following: expansion tank, factory hoses, water pump, thermostat, fan (especially if your vehicle comes factory with a clutch fan), and radiator. Factory BMW expansion tanks are plastic and prone to either breaking off at connection points or combusting. As factory rubber hoses age they either crack or break over time - we offer silicone cooling hose upgrades for most applications to avoid future failures. If you have an older vehicle, your water pump likely comes from the factory with a plastic impeller - we offer upgraded water pumps with metal impellers that are far more reliable. Newer model BMWs utilize electric water pumps - BMW spent millions of dollars engineering these water pumps, but they fail so often that we recommend replacing at 60,000 mile service intervals to avoid being stranded on the side of the road. In terms of thermostats, we offer various upgraded thermostats for racing applications. If your BMW utilizes a clutch fan from the factory, we have several options available in terms of universal electric fans - we recommend replacing these to avoid sending brittle plastic fan blades through your hood. For radiators, we recommend swapping out your radiator for one that does not use plastic connection points like your factory radiator.

Sub-Categories

Sort By:

Nissens - Corporate Logo
T#:363985
Part#: 17117562079
In Stock
$ 174.52 USD
Free Shipping
$ 174.52 USD
Free Shipping
Fits both automatic and manual transmission BMWs! This radiator is made by Nissens, an original equipment supplier to BMW. The cooling system is a weak point on most BMWs, causing many BMWs to develop issues in as few as 50,000 miles. Overheating your engine can and usually will result in large repair bills and sometimes a warps the cylinder head(s), requiring intensive repair or full replacement. Prevent potential failure by replacing your radiator early, keeping your BMW happy and cool. This is the brand we use exclusively on our own BMWs, and think you should as well! As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
N54 Billet 90 Degree Coolant Tank Fitting
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:12184492
Part#: VTT-COOLANT-90-1
In Stock
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping

Enhance the flexibility of your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting. Ideal for applications such as single turbo setups or forward-facing intake manifolds, this fitting provides extra clearance and versatile hose routing options.

Key Benefits:

  • Allows hose to run straight down, increasing clearance
  • Made of durable 6061-T6 aluminum for long-lasting performance
  • Anodized black finish for enhanced durability and corrosion resistance
  • Includes fitting and clamp for easy installation

Upgrade your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting for improved performance and versatility.

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:7530036
Part#: COOLANTCAPBLUE
In Stock
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less

Ina - Corporate Logo
T#:40004835
Part#: 11515A05704
In Stock
$ 445.99 USD
Free Shipping on orders $49 and up
Water pumps are a critical component of your cooling system. A failed water pump will stop the flow of coolant in your vehicle, leading to overheating and eventual engine damage. Replace your faulty or aging water pump with a high-quality OEM unit from Schaeffler. Replacement for BMW part # 11519455978, 11517632426, and 11517563659.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7530034
Part#: COOLANTCAPRED
In Stock
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:26404815
Part#: VTT-N54-COOLANT9
In Stock
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
Race German - Corporate Logo
T#:6827888
Part#: RGCTSA1/8NPT
In Stock
$ 35.99

This product was last offered at the strikethrough price on
10-07-2026

$ 31.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 35.99

This product was last offered at the strikethrough price on
10-07-2026

$ 31.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. For those looking to install an aftermarket coolant temp gauge, Race German has the perfect accessory for you! This adapter is machined out of aluminum and splices into your upper radiator hose. Perfect for use with Race German's E30 temperature gauge but has compatibility with a wire variety of other cars as well! Features: Tapped for 1/8NPT sized sensor 38mm diameter outlets which fit most BMW hoses Includes 2x hose clamps **Does not include temp sensor
Show More Show Less

Race German - Corporate Logo
T#:6827887
Part#: RGCTSAM12
In Stock
$ 35.99 USD
Free Shipping on orders $49 and up
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. For those looking to install an aftermarket coolant temp gauge, Race German has the perfect accessory for you! This adapter is machined out of aluminum and splices into your upper radiator hose. Perfect for use with Race German's E30 temperature gauge but has compatibility with a wire variety of other cars as well! Features: Tapped for M12x1.5 sized sensor 38mm diameter outlets which fit most BMW hoses Includes 2x hose clamps **Does not include temp sensor
Show More Show Less

VTT Compete N54 Coolant Hose Kit - E8X, E9X N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:590227
Part#: VTT-N54-COOLANT-
Ships on Nov 24, 2026
$ 469.99 USD
Free Shipping
$ 469.99 USD
Free Shipping
A complete upgrade to the weak factory hoses.
Nissens - Corporate Logo
T#:363486
Part#: 17111433025
In Stock
$ 331.77

This product was last offered at the strikethrough price on
05-01-2026

$ 239.99 USD
$ 239.99 USD
Replace your radiator and restore cooling performance
Nissens - Corporate Logo
T#:362222
Part#: 17119071519
In Stock
$ 173.39

This product was last offered at the strikethrough price on
06-02-2026

$ 166.36 USD
Free Shipping
$ 166.36 USD
Free Shipping

The cooling system is a weak point on any E46. Many cars develop issues in as few as 50,000 miles.

Overheating an inline 6 engine almost always results in large repair bill, and sometimes a warped cylinder head.

Replace yours with a high-quality OEM Nissens radiator to prevent further issues and potential overheating.

Show More Show Less


Nissens - Corporate Logo
T#:362908
Part#: 17111436060
In Stock
$ 229.99 USD
$ 229.99 USD
This radiator is made by Nissens, an original equipment supplier to BMW. The cooling system is a weak point on most BMWs, causing many BMWs to develop issues in as few as 50,000 miles. Overheating your engine can and usually will result in large repair bills and sometimes a warps the cylinder head(s), requiring intensive repair or full replacement. Prevent potential failure by replacing your radiator early, keeping your BMW happy and cool. This is the brand we use exclusively on our own BMWs, and think you should as well! As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:22987117
Part#: VTT-N54-COOLANTR
In Stock
$ 464.99 USD
Free Shipping on orders $49 and up
VTT is proud to announce our N54 Billet/Silicone coolant hose upgrade kit! The factory plastic coolant connectors are prone to breaking over time, and the hoses are just your standard run of the mill coolant hose. We wanted to provide an upgrade to both areas. What we came up with is Billet 6061-T6 connectors anodized black for corrosion resistance, and 6 ply silicone molded silicone hoses in the factory shapes. Full hose kit includes: Upper Radiator hose Lower Radiator hose Cylinder head outlet hose (Mickey Mouse hose, this hose is notorious for breaking when removed) Upper vent hose (this hose is also notorious for breaking as stock the center is plastic that crumbles when moved) Water pump inlet hose (Horse Shoe hose)
Show More Show Less
VTT Billet/Silicone Cylinder Head Cooling Hose - B58TU
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:29334026
Part#: VTT-B58TU-UCH
Ships in 10 Business Days
Starting at $ 209.99 USD
Free Shipping on orders $49 and up
Starting at $ 209.99 USD
Free Shipping on orders $49 and up

Positioned directly in the charge pipe's path, the stock B58TU upper cylinder head cooling hose, primarily made of plastic, is prone to damage. A dislodged charge pipe can easily take out this cooling hose, leading to severe engine damage through rapid coolant loss and overheating.

To address this vulnerability, VTT has engineered a robust solution. By replacing the OEM rubber hose with a durable 7-ply silicone variant, they offer superior resilience and longevity. Furthermore, they've upgraded the factory plastic flanges to 6061-T6 billet aluminum with black anodizing, enhancing corrosion resistance.

This upgraded hose is the ultimate solution, providing protection against dislodged charge pipes and the heat generated from spirited driving or track use.

Key Features:

Direct factory replacement for easy installation 6061-T6 billet aluminum with black anodizing for improved corrosion resistance Durable 7-ply silicone available in three colors Upgrade your BMW B58TU engine with this enhanced cooling hose from Vargas Turbo Technologies for superior performance and reliability.

Show More Show Less

Nissens - Corporate Logo
T#:380578
Part#: 17111436063
In Stock
$ 188.99 USD
$ 188.99 USD
This radiator is made by Nissens, an original equipment supplier to BMW. The cooling system is a weak point on most BMWs, causing many BMWs to develop issues in as few as 50,000 miles. Overheating your engine can and usually will result in large repair bills and sometimes a warps the cylinder head(s), requiring intensive repair or full replacement. Prevent potential failure by replacing your radiator early, keeping your BMW happy and cool. This is the brand we use exclusively on our own BMWs, and think you should as well! As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

VTT Complete Blue N54 Coolant Hose Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:17771579
Part#: VTT-N54-COOLANTB
Ships in 6 Business Days
$ 464.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW N54's cooling system with VTT's Billet/Silicone coolant hose upgrade kit. Designed to address common issues with factory plastic connectors and standard coolant hoses, this kit offers premium enhancements for durability and performance. Crafted with Billet 6061-T6 connectors for corrosion resistance and 6-ply molded silicone hoses in factory shapes, it ensures reliability and longevity for your BMW's cooling system.
  • Upgraded Billet 6061-T6 connectors for enhanced durability
  • Corrosion-resistant black anodized finish
  • 6-ply molded silicone hoses for superior performance
  • Factory-shaped design for easy installation
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:27805174
Part#: B58-BSCHK-BLK
Back Ordered
$ 556.99 USD
Free Shipping
$ 556.99 USD
Free Shipping

Upgrade your cooling system with this kit, designed to address common issues with factory plastic cooling hose connectors and hoses. This kit features high-quality upgrades, including 6061-T6 billet aluminum connectors and 6-ply silicone hoses, ensuring durability and reliability.

Included in this comprehensive kit are:

Upper Radiator Hose (OEM Part 17128616548) Lower Radiator Hose (OEM Part 17128633482) Expansion Tank Hose (OEM Part 17128620944) Upper Vent Hose (OEM Part 17128616555)

Say goodbye to brittle plastic and dried-out hoses, and enjoy a more robust and long-lasting cooling system for your vehicle.

Show More Show Less

Race German - Corporate Logo
T#:2602235
Part#: 001-08-00-00-09
Ships in 2 Business Days
$ 50.00 USD
Free Shipping on orders $49 and up
Often overlooked item for your 24V E30 swap, this sensor is the best option for a plug and play solution to have a working temperature gauge when doing a engine swap.
Vargas Turbo Technologies - Corporate Logo
T#:27805179
Part#: B58-BSCHK-BLU
Ships in 9 Business Days
$ 556.99 USD
Free Shipping
$ 556.99 USD
Free Shipping

Upgrade your cooling system with this kit, designed to address common issues with factory plastic cooling hose connectors and hoses. This kit features high-quality upgrades, including 6061-T6 billet aluminum connectors and 6-ply silicone hoses, ensuring durability and reliability.

Included in this comprehensive kit are:

Upper Radiator Hose (OEM Part 17128616548) Lower Radiator Hose (OEM Part 17128633482) Expansion Tank Hose (OEM Part 17128620944) Upper Vent Hose (OEM Part 17128616555)

Say goodbye to brittle plastic and dried-out hoses, and enjoy a more robust and long-lasting cooling system for your vehicle.

Show More Show Less

Nissens - Corporate Logo
T#:583907
Part#: 17111468546
In Stock
$ 304.82

This product was last offered at the strikethrough price on
06-08-2026

$ 270.99 USD
Limited Qty Sale
Free Shipping
$ 304.82

This product was last offered at the strikethrough price on
06-08-2026

$ 270.99 USD
Limited Qty Sale
Free Shipping

Vargas Turbo Technologies - Corporate Logo
T#:26971821
Part#: VTT-S58-TB-COOLA
Ships in 10 Business Days
$ 114.99 USD
Free Shipping
$ 114.99 USD
Free Shipping
Heat is the enemy of power, and the last thing you want is hot coolant heating your charge air even further right before it enters the charge cooler, but this is what BMW has done on the S58. This is done for emissions and quick warm-up purposes. However, If you are looking to make power on the S58, and are upgrading your charge cooler, or adding PI. While you are there, it takes 30 seconds to remove the coolant lines from the TB connections and replace them with our billet coolant delete kit. This completely removes the coolant from the Throttle body and provides a bypass for the coolant. Simply remove the two lines going to the throttle body, and run our hose in their place. You leave the coolant fittings on the TB open and avoid any unwanted heat being introduced into your charge tract. In our opinion a must for full effort builds. We take the work out of it for you. Kit included: One Plug and Play TB Coolant Delete Hose Kit Features: Billet 6061 Anodized coolant fittings for long leak-free life Reinforced 7-ply silicone hose for strength and longevity Vibration-resistant crimp clamps 100% plug and play, NO cutting or removing factory clamps or hoses. Fully reversible
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7530035
Part#: COOLANTCAPRAW
Ships in 3 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less
Vargas Billet Water Neck - B58 Mk5 Supra/G29 Z4
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:7292067
Part#: VTT-A90G29-WN
Ships in 10 Business Days
$ 147.99 USD
Free Shipping
$ 147.99 USD
Free Shipping
The Factory B58 TU water neck is plastic and is right in the path of your charge pipe if you lose a connection and it blows off. If this does happen to you it can break the plastic neck emptying your coolant in seconds causing you in the best-case scenario to be stranded, and in the worst-case scenario expensive engine damage. Add some cheap insurance with Vargas' Billet Water neck. Product Details: Plug and play direct factory replacement 6061-T6 Billet aluminum with black anodizing for a corrosion-free life Cheap insurance against a blown charge pipe which could turn into a blown motor
Show More Show Less


Nissens - Corporate Logo
T#:381279
Part#: 17117618807
In Stock
$ 191.99 USD
Free Shipping
$ 191.99 USD
Free Shipping

Ensure optimal engine cooling performance for your BMW N20 2.0L & N55 3.0L Engines with Turner Motorsport's Nissens Radiator. Designed to withstand the demands of high-performance engines, this replacement radiator from Nissens ensures efficient heat dissipation, keeping your engine at an optimal operating temperature. With a direct fit for easy installation, this radiator is the perfect solution to keep your BMW running smoothly.

  • Direct replacement for BMW N20 2.0L & N55 3.0L Engines
  • Ensures efficient heat dissipation for optimal engine cooling
  • High-quality construction for durability and reliability
  • Easy installation with direct fit design
  • Maintains engine performance and longevity
Show More Show Less
Nissens - Corporate Logo
T#:362934
Part#: 17111702969
In Stock
$ 252.99

This product was last offered at the strikethrough price on
10-20-2026

$ 212.99 USD
Limited Qty Sale
$ 252.99

This product was last offered at the strikethrough price on
10-20-2026

$ 212.99 USD
Limited Qty Sale
This radiator is made by Nissens, an original equipment supplier to BMW. The cooling system is a weak point on most BMWs, causing many BMWs to develop issues in as few as 50,000 miles. Overheating your engine can and usually will result in large repair bills and sometimes a warps the cylinder head(s), requiring intensive repair or full replacement. Prevent potential failure by replacing your radiator early, keeping your BMW happy and cool. This is the brand we use exclusively on our own BMWs, and think you should as well! As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Nissens - Corporate Logo
T#:591348
Part#: 17117823568
Ships in 3 Business Days
Sale - Save 2% $ 187.67

This product was last offered at the strikethrough price on
05-15-2026

$ 184.10 USD
Sale - Save 2%
$ 187.67

This product was last offered at the strikethrough price on
05-15-2026

$ 184.10 USD
More than likely, you are going to replace the radiator in your vehicle at least once. The joints where the cores meet the end tanks tend to get weak and are the first place to spring a leak. Impacts to the fins themselves can cause holes to form. Corrosion and clogging from the inside can make cooling less than effective and compromise coolant flow. Genuine BMW Radiator - This item fits the following BMW Chassis: F25 X3,F26 X4 Fits BMW Engines including: N20,N55
Show More Show Less

Dinan High-Performance Heat Exchanger - F22/23 F3X B46/48 B58 ...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:21045539
Part#: D780-0002
Ships in 2 Business Days
Sale - Save 10% $ 584.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 526.46 USD
Free Shipping
Sale - Save 10%
$ 584.99

This product was last offered at the strikethrough price on
09-29-2026

$ 526.46 USD
Free Shipping
The factory B4x/B58 heat exchanger is not built to cater to the rigorous demands often associated with a modified build. The thin core is easily overwhelmed with IAT's rising dramatically once pushed beyond a few successive WOT pulls or even a few minutes at the track. This elevation in temperature gives way to the factory ECU fail safes pulling timing and reducing overall power in order to keep the system from overheating to the point of permanent damage. On an application where enjoyment is directly attributed to pushing the platform to its limits this constraint to cooling presents a challenge for the automotive enthusiast. The Dinan B4x/B58 heat exchanger for the F2x/F3x chassis assists in mitigating these issues with a more robust core (48mm thick Dinan core vs. 27mm thick OEM core) that wields 78% more heat transfer surface area for improved cooling capacity. The significant increase in core thickness requires unique "L" shaped end tanks to be incorporated as well, which also contributes to the overall thermal mass (ability to absorb, store, and release heat) improvement beyond the OEM setup. With up to a 15° IAT delta recorded over stock the Dinan heat exchanger is ready, and able, to assist in extending your vehicles ability to deliver maximum performance time and time again for your driving enjoyment! Features: Average of 8° reduction in IAT's with a maximum reduction of 15° over 15 successive WOT pulls Reduces the tendency to heat soak / go in to limp mode 48mm thick Dinan cooler vs. 27mm thick stock cooler 78% more cooling surface area and volume than stock 100% TIG welded and pressure tested Installation hardware included (inclusive of xDrive specific transmission oil cooler brackets) NOTE: Due to the enlarged core and unique "L" shaped endtanks minor modification to the plastic core stack shroud may be required with some factory configurations ( particularly those with the optional OEM hot climate heat exchanger). Consult the installation PDF for full documentation on what exactly that entails. (https://documents.dinancars.com/d780-0002.pdf)
Show More Show Less

AFE - Corporate Logo
T#:35121163
Part#: 46-53241
Back Ordered
Sale - Save 5% $ 236.00

This product was last offered at the strikethrough price on
10-19-2026

$ 224.20 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 236.00

This product was last offered at the strikethrough price on
10-19-2026

$ 224.20 USD
Free Shipping on orders $49 and up
The aFe POWER BladeRunner OER Series Radiators are engineered as the perfect replacement for worn or damaged stock radiators. Over time, stock radiators lose efficiency due to corrosion and road debris, with aging connectors and joints becoming prone to leaks that can lead to overheating and costly engine damage. Our OER radiators feature an all-aluminum core with molded plastic end tanks, incorporating all necessary mounting points and fittings for quick, easy installation. Keep your engine cool and performing at its best with aFe POWER BladeRunner OER Series Radiators.
Show More Show Less
Nissens - Corporate Logo
T#:374220
Part#: 17117558480
In Stock
38% off MSRP $ 395.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 243.99 USD
38% off MSRP
$ 395.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 243.99 USD
Keep your engine cooling properly

Nissens - Corporate Logo
T#:341244
Part#: 17112241913
In Stock
$ 221.99

This product was last offered at the strikethrough price on
06-29-2026

$ 183.99 USD
Limited Qty Sale
$ 221.99

This product was last offered at the strikethrough price on
06-29-2026

$ 183.99 USD
Limited Qty Sale
​This radiator is made by Nissens, an original equipment supplier to BMW. The cooling system is a weak point on most BMWs, causing many BMWs to develop issues in as few as 50,000 miles. Overheating your engine can and usually will result in large repair bills and sometimes a warps the cylinder head(s), requiring intensive repair or full replacement. Prevent potential failure by replacing your radiator early, keeping your BMW happy and cool. This is the brand we use exclusively on our own BMWs, and think you should as well! As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

Nissens - Corporate Logo
T#:641058
Part#: 17118476010
Ships in 1 Business Day
$ 746.87 USD
Free Shipping
$ 746.87 USD
Free Shipping
This radiator is made by Nissens, an original equipment supplier to BMW. The cooling system is a weak point on most BMWs, causing many BMWs to develop issues in as few as 50,000 miles. Overheating your engine can and usually will result in large repair bills and sometimes a warps the cylinder head(s), requiring intensive repair or full replacement. Prevent potential failure by replacing your radiator early, keeping your BMW happy and cool. This is the brand we use exclusively on our own BMWs, and think you should as well! As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

Ina - Corporate Logo
T#:36201645
Part#: 11538642559
Ships in 1 Business Day
$ 367.33 USD
Free Shipping on orders $49 and up
$ 367.33 USD
Free Shipping on orders $49 and up
Engineered specifically for BMW models, the electronic thermostat and coolant distribution module plays a vital role in the engine’s cooling system, adapting to changing temperatures for superior performance under all driving conditions. Whether on the track or the highway, this module ensures your BMW runs cooler, longer, and more efficiently.
Show More Show Less
BMW E30 M20 Radiator
This fits E30 09/87 and up, Manual gearbox only!
Nissens - Corporate Logo
T#:597571
Part#: 17112241912
Ships in 1 Business Day
$ 264.99

This product was last offered at the strikethrough price on
05-07-2026

$ 257.99 USD
$ 257.99 USD

BMW E30 M20 Radiator provides a reliable factory replacement solution for your vehicle's cooling system. Over time, radiators can develop leaks at the joints where the cores meet the end tanks, or the fins may become damaged. Corrosion and internal clogging can also impair cooling efficiency. Replacing your old radiator with this high-quality factory replacement ensures effective cooling performance and prevents coolant leaks.

  • Reliable Replacement: A direct factory replacement designed to restore optimal cooling performance.
  • Prevents Leaks: Addresses common failure points, such as joint leaks and damaged fins.
  • Improves Cooling Efficiency: Mitigates issues caused by corrosion and clogging for effective coolant flow.
  • Easy Installation: Designed for a straightforward swap with your existing radiator.
  • High-Quality Construction: Ensures durability and long-lasting performance.
Show More Show Less
ACM - Corporate Logo
T#:2069
Part#: 17201728770
Ships in 1 Business Day
$ 207.15

This product was last offered at the strikethrough price on
05-11-2026

$ 205.10 USD
Free Shipping
$ 205.10 USD
Free Shipping
This transmission fluid/oil cooler fits E36 318i 318is 318ti 323i 323is 325i 325is 328i 328is M3, E34 525i 530i 1993-1995 and Z3 1.9 2.3 2.5i 2.8 3.0i with automatic transmission.

This oil cooler fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1993-1995 E34 BMW 525i 525i Wagon
1994-1995 E34 BMW 530i 530i Wagon
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0ibr>
Show More Show Less


Nissens - Corporate Logo
T#:596465
Part#: 17101439101
Ships in 1 Business Day
$ 183.01 USD
$ 183.01 USD
More than likely, you are going to replace the radiator in your vehicle at least once. The joints where the cores meet the end tanks tend to get weak and are the first place to spring a leak. Impacts to the fins themselves can cause holes to form. Corrosion and clogging from the inside can make cooling less than effective and compromise coolant flow. Replace your leaking unit with a factory replacement and get that jug of coolant out of your back seat.
Show More Show Less
Nissens - Corporate Logo
T#:591953
Part#: 17111468073
Ships in 1 Business Day
$ 368.99

This product was last offered at the strikethrough price on
08-13-2026

$ 356.99 USD
$ 356.99 USD
Replacement radiator for your BMW!
Nissens - Corporate Logo
T#:596469
Part#: 17117533472
In Stock at Vendor
$ 634.70

This product was last offered at the strikethrough price on
07-15-2026

$ 594.43 USD
$ 594.43 USD
More than likely, you are going to replace the radiator in your vehicle at least once. The joints where the cores meet the end tanks tend to get weak and are the first place to spring a leak. Impacts to the fins themselves can cause holes to form. Corrosion and clogging from the inside can make cooling less than effective and compromise coolant flow. Replace your leaking unit with a factory replacement and get that jug of coolant out of your back seat.
Show More Show Less

Vaico - Corporate Logo
T#:595421
Part#: 17127575428
Ships in 1 Business Day
$ 143.99

This product was last offered at the strikethrough price on
08-13-2026

$ 80.99 USD
Free Shipping on orders $49 and up
$ 80.99 USD
Free Shipping on orders $49 and up
Overflow hoses connect the radiator and the expansion tank to store overflow of coolant. As pressures in the cooling system increase due to coolant temperatures, a valve on the radiator cap permits coolant back into the reservoir to help ease the build-up of pressure and prevent coolant loss. If your hose is leaking or damaged, we recommend swapping it out with this replacement from Vaico.
Show More Show Less

Nissens - Corporate Logo
T#:640043
Part#: 17117547059
In Stock at Vendor
$ 259.99

This product was last offered at the strikethrough price on
05-07-2026

$ 252.99 USD
$ 252.99 USD
Nissens - Corporate Logo
T#:369502
Part#: 17112242138
Ships in 1 Business Day
$ 176.67 USD
$ 176.67 USD
Complete new radiator

Nissens - Corporate Logo
T#:592137
Part#: 17117570489
Ships in 1 Business Day
$ 221.56

This product was last offered at the strikethrough price on
05-11-2026

$ 207.42 USD
$ 207.42 USD
Nissens - Corporate Logo
T#:594432
Part#: 17117589004
Ships in 1 Business Day
$ 280.00

This product was last offered at the strikethrough price on
05-07-2026

$ 275.90 USD
$ 275.90 USD
Replacement Radiator from Nissens

Nissens - Corporate Logo
T#:592144
Part#: 17117794488
Ships in 1 Business Day
$ 326.99

This product was last offered at the strikethrough price on
05-07-2026

$ 293.99 USD
Free Shipping
$ 293.99 USD
Free Shipping
More than likely, you are going to replace the radiator in your vehicle at least once. The joints where the cores meet the end tanks tend to get weak and are the first place to spring a leak. Impacts to the fins themselves can cause holes to form. Corrosion and clogging from the inside can make cooling less than effective and compromise coolant flow. Replace your leaking unit with a factory replacement and get that jug of coolant out of your back seat.
Show More Show Less

Nissens - Corporate Logo
T#:362195
Part#: 17119071517
Ships in 1 Business Day
$ 184.70

This product was last offered at the strikethrough price on
05-11-2026

$ 175.65 USD
$ 175.65 USD
Replace your leaking radiator.
Nissens - Corporate Logo
T#:586994
Part#: 64541392913
Ships in 6 Business Days
$ 191.99 USD
Free Shipping
$ 191.99 USD
Free Shipping
Nissens - Corporate Logo
T#:361274
Part#: 17113400013
Ships in 1 Business Day
$ 179.29

This product was last offered at the strikethrough price on
07-15-2026

$ 177.95 USD
$ 177.95 USD
More than likely, you are going to replace the radiator in your vehicle at least once. The joints where the cores meet the end tanks tend to get weak and are the first place to spring a leak. Impacts to the fins themselves can cause holes to form. Corrosion and clogging from the inside can make cooling less than effective and compromise coolant flow. Replace your leaking unit with a factory replacement and get that jug of coolant out of your back seat.
Show More Show Less


Nissens - Corporate Logo
T#:373949
Part#: 17113415693
Ships in 2 Business Days
$ 191.46

This product was last offered at the strikethrough price on
05-11-2026

$ 178.96 USD
$ 178.96 USD
Nissens - Corporate Logo
T#:585074
Part#: 17111469179
Ships in 6 Business Days
$ 233.99 USD
Free Shipping
$ 233.99 USD
Free Shipping
Standard replacement radiator.