BMW Water Pumps

Water Pump And Thermostat Kit - BMW N55 F Chassis

Ensure optimal engine cooling and performance with this high-quality Water Pump And Thermostat Kit - BMW N55 F Chassis. In the mid-2000s, BMW introduced electronically controlled water pumps and thermostats for better temperature regulation and efficiency. However, these components tend to have a shorter lifespan compared to traditional mechanical designs, often failing before BMW’s recommended 80,000-mile service interval.

This complete kit from Turner Motorsport includes premium-quality components that match OEM specifications, providing reliable and efficient cooling system performance. Maintaining a properly functioning cooling system helps prevent overheating, enhances efficiency, and extends engine life.

Signs Your Water Pump and Thermostat May Need Replacement:

• Engine overheating or failing to reach operating temperature
• Water pump running intermittently or erratically
• Cooling fans operating at maximum output
• Engine fault codes, including 20A804

Upgrade your BMW N55 F Chassis cooling system with this all-in-one kit for worry-free performance and longevity.

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Mahle-Behr thermostat
• Geba water pump
• Vaico coolant
• Mounting hardware required for the water pump

This item fits the following BMWs:
2006-2010 E60 BMW 550i
2006-2010 E63 BMW 650i
2005-2008 E65 BMW 750i 750li
2007-2013 E70 BMW X5 4.8i X5 xDrive48i

The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.

Included in this kit:

Thermostat
Water pump
Genuine BMW coolant
Mounting hardware required for both the thermostat and water pump

As a common failure point among all BMW models, the water pump should be serviced every 60,000 miles. While doing so, it's wise to change the thermostat to ensure proper functionality of your vehicle's cooling system. Thankfully, Turner Motorsport has combined these parts into one simple kit, making your cooling system refresh easier than ever. This Water Pump & Thermostat Replacement Kit Includes:

Meyle Water Pump - Metal Impeller (11510393338) Hamburg-Technic Thermostat (11531743017) Genuine BMW Coolant/Antifreeze (82141467704) Genuine BMW Installation Hardware Looking to maintain your M44 cooling system while enhancing cooling capabilities? Choose this performance kit assembled by the enthusiasts at Turner Motorsport and keep your BMW running cool and efficiently!

This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:

• OEM VDO electric water pump, p/n 11517588885 or 11517632426
• OEM mounting screws for water pump (set of 3), p/n 11517602123
• OEM Behr thermostat, p/n 11537549476
• Original BMW connecting hose from thermostat to water pump, p/n 11537545665
• Original BMW hose clamps for hose (x 2)
  
• BUY AS A PACKAGE AND SAVE $$!
  
  The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.
  
  How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.
  
  This water pump package fits the following BMWs with the N54 engine:
  2007-2010 E60 BMW 535i 535xi 535i xDrive
  2008-2010 E82 BMW 135i
  2011-2012 E82 BMW 1M Coupe
  2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
  2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
  2007-2010 E93 BMW 335i - Convertible

Maintain your BMW's cooling system and avoid costly repairs with our comprehensive Water Pump and Thermostat Replacement Kit, meticulously crafted by the experts at Turner Motorsport! Designed to service BMW models with the N62 engine, this kit ensures your vehicle runs at optimal temperature, preventing overheating and extending engine life.

Key Benefits:

All-Inclusive Kit: This package includes everything you need for a complete cooling system overhaul, saving you time and effort sourcing individual components. High-Quality Components: Each part in this kit is manufactured to meet or exceed OEM standards, guaranteeing reliable performance and longevity. Optimal Cooling Performance: Regularly replacing your water pump and thermostat every 60,000 miles is crucial for maintaining peak cooling efficiency. Our kit ensures your BMW's engine stays within the ideal temperature range, preventing overheating and potential engine damage. Enhanced Reliability: By including premium components like the Wahler Thermostat and Graf Water Pump, this kit provides enhanced durability and peace of mind. Kit Contents:

Wahler Thermostat (Part #11537586885): Renowned for its precision and reliability, ensuring your engine maintains the correct operating temperature. Graf Water Pump (Part #11517586779): High-performance pump designed for consistent and efficient coolant circulation. Genuine BMW Hex Bolts (M6x25) (Part #07119905400): Essential hardware for secure installation. Genuine BMW Hex Bolts (M6x40) (Part #07119904525): Ensures all components are firmly in place. Genuine BMW Coolant/Antifreeze (Diluted, 1 Gallon) (Part #82141467704): Formulated specifically for BMW cooling systems, providing optimal protection against corrosion and freezing. Upgrade your BMW N62 cooling system with this expertly curated Water Pump and Thermostat Replacement Kit. Perfect for maintaining the health and efficiency of your engine, this kit is an essential investment for any BMW enthusiast. Order now from Turner Motorsport and ensure your vehicle performs at its best.

BMW N55 3.0L Water Pump is an essential component for maintaining the performance and reliability of your BMW. Manufactured by Turner Motorsport, this high-quality water pump is designed to ensure optimal cooling efficiency for the N55 3.0L engine.

• Reliable Performance: Designed to handle the high demands of the BMW N55 engine, ensuring consistent cooling performance.
• High-Quality Construction: Made with durable materials to resist wear and provide long-lasting service.
• Prevents Overheating: Helps prevent engine overheating by effectively circulating coolant throughout the engine.
• Reduces Coolant Leaks: Engineered to minimize the risk of leaks, maintaining proper coolant levels and engine temperature.
• Quiet Operation: Operates smoothly and quietly, avoiding the whining noises often associated with failing pumps.