BMW Coolant Expansion Tanks

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.

60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.

Features and benefits:

Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded

Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

The coolant expansion tank provides hot coolant with a place to travel, preventing pressure buildup within your cooling system. On many BMWs, this component is constructed from plastic. While cheap to replace and manufacture, a failed cooling tank can cause costly engine damage.

With this issue in mind, Moroso designed a high-quality replacement. Featuring TIG welded, 100% aluminum construction, this tank is sure to outperform it's factory counterpart.

Features:

Key Benefits:

Direct bolt-in replacement for stock, 2 piece plastic tank Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations & age Features billet aluminum mounting tab/bleeder assembly for strength and precision No cutting of factory hoses is required and accepts the factory clip-on hose Moroso part (63324) racing radiator cap included; operates in the same pressure range as the factory cap Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks This aluminum tank can be polished, chromed, powder coated or left as-is

Charge Air Cooler Expansion Tank - Rein | BMW F22/23, F3X B48/B46 B58 is an essential component that ensures proper coolant circulation in the charge air cooling system. Acting as a reservoir, this expansion tank allows coolant to expand and contract with temperature fluctuations, preventing excessive pressure buildup. Over time, plastic tanks can become brittle due to constant exposure to heat cycles, leading to cracks and leaks. A failing tank can cause coolant loss, reducing the efficiency of the charge air cooler and leading to increased intake temperatures, which negatively impact horsepower and engine performance. Rein offers a high-quality direct replacement designed for durability and a perfect fit on BMW F22, F23, and F3X models with B48, B46, and B58 engines.

• Maintains proper coolant circulation within the charge air cooling system
• Prevents excessive pressure buildup caused by temperature fluctuations
• Durable construction resists cracking and leaks for long-lasting performance
• Direct replacement for BMW F22, F23, and F3X models with B48, B46, and B58 engines
• Helps maintain optimal intake air temperatures, preserving horsepower and efficiency
• OE-quality fitment ensures hassle-free installation and reliable function

The coolant expansion tank provides hot coolant with a place to travel, preventing pressure buildup within your cooling system. On many BMWs, this component is constructed from plastic. While cheap to replace and manufacture, a failed cooling tank can cause costly engine damage.

With this issue in mind, Moroso designed a high-quality replacement. Featuring TIG welded, 100% aluminum construction, this tank is sure to outperform it's factory counterpart.

Features:

Bolt-in replacement for stock cracked or discolored tanks Fabricated aluminum Features billet aluminum filler neck and integrated sight glass to monitor coolant level Can be polished, painted, powder coated or left as-is Moroso radiator cap (63320) included

Reservoir Hose CHE0885 is a top-quality replacement part designed for BMW vehicles, ensuring a reliable connection between your vehicle’s reservoir and cooling system. Engineered for durability and heat resistance, this hose provides a seamless flow of coolant to maintain optimal engine temperature, preventing overheating. Reservoir Hose CHE0885 is made to meet or exceed OEM specifications, ensuring a perfect fit for your BMW. Available through Turner Motorsport, this hose is an essential component for keeping your vehicle's cooling system functioning efficiently.

• High-quality reservoir hose for BMW vehicles
• Ensures reliable coolant flow for optimal engine performance
• Made from heat-resistant, durable materials
• Prevents overheating and engine damage
• Meets or exceeds OEM specifications
• Perfect fit for a variety of BMW models
• Available from trusted supplier Turner Motorsport
• Easy to install with secure connections

Includes connector housing with terminals and seals. Commonly used for the coolant level sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 61132359999 - Commonly used for the coolant level sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943