Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

TRW - Corporate Logo
T#:304215
Part#: 31102283578
In Stock
$ 145.99

This product was last offered at the strikethrough price on
04-28-2026

$ 105.99 USD
Free Shipping
$ 105.99 USD
Free Shipping

Improve your BMW's driving experience by addressing the wear and tear caused by years on the road. The suspension takes a beating from pot holes, speed bumps, and road hazards, leading to a weakened and sloppy feel. Enhance safety and ride comfort by replacing worn components, such as the control arm.

  • Improved driving experience and ride comfort
  • Enhanced safety through the replacement of worn suspension components
  • Non-serviceable ball joints and other components addressed for prolonged lifespan
  • Control arm replacement for a better feel and handling
  • Recommended replacement in pairs for optimal performance
  • Suitable for both front and rear suspension upgrades
  • Referred to as a wishbone by BMW
  • Performance upgrade for non-M3 models, recommended to replace in pairs due to heavy-duty nature
Show More Show Less
TRW - Corporate Logo
T#:304217
Part#: 31102283577
In Stock
42% off MSRP $ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping
42% off MSRP
$ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping

Enhance your driving experience with our premium suspension upgrade for your BMW. Over time, the road can take a toll on your suspension, leading to a sloppy and weak feel while driving. Our solution? Replace the control arm – a critical component that, after years of service, may wear out. Boost safety and ride comfort with this easy upgrade.

  • Improved driving experience
  • Enhanced safety
  • Better ride comfort
  • Extended service life of replacement parts

If you're considering replacing any part of your front or rear suspension, opt for doing it in pairs (both left and right sides). This ensures optimal performance and longevity of the replacement parts. In the BMW world, it's often referred to as a wishbone.

For non-M3 models, this isn't just a replacement – it's a performance upgrade. These heavy-duty components are recommended to be replaced in pairs to maximize their efficiency and provide a seamless driving experience.

Show More Show Less
TRW - Corporate Logo
T#:304216
Part#: 31102283575
In Stock
$ 90.99 USD
Free Shipping
$ 90.99 USD
Free Shipping
This left/driver's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less

Packaged by Turner - Corporate Logo
T#:42099866
Part#: 31126854727TKT
In Stock
Sale - Save 3% $ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD
Free Shipping on orders $49 and up
Give your BMW the sharp handling it was engineered for with the Front Control Arm Refresh Kit, the perfect solution for a complete front suspension overhaul.

Packaged by Turner - Corporate Logo
T#:711928
Part#: 31126852991KT2
Back Ordered
$ 553.99

This product was last offered at the strikethrough price on
04-06-2026

$ 490.99 USD
Free Shipping
$ 490.99 USD
Free Shipping
Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.
Show More Show Less
TRW - Corporate Logo
T#:395054
Part#: 31126855741
Back Ordered
$ 133.99

This product was last offered at the strikethrough price on
03-06-2026

$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
Thrust arm with ball joint

TRW - Corporate Logo
T#:348929
Part#: 33322283546
In Stock
$ 136.14

This product was last offered at the strikethrough price on
04-27-2026

$ 67.36 USD
Free Shipping on orders $49 and up
$ 67.36 USD
Free Shipping on orders $49 and up

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

 

33322283546

TRW - Corporate Logo
T#:348928
Part#: 33322283545
In Stock
$ 69.99 USD
Free Shipping on orders $49 and up

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

 

33322283545


TRW - Corporate Logo
T#:348950
Part#: 33322283547
In Stock
$ 175.52

This product was last offered at the strikethrough price on
03-17-2026

$ 152.99 USD
Free Shipping
$ 152.99 USD
Free Shipping
Connects the spindle assembly to the rear subframe

TRW - Corporate Logo
T#:341238
Part#: 33322283548
In Stock
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
Connects the spindle assembly to the rear subframe
TRW - Corporate Logo
T#:395053
Part#: 31126855742
In Stock
$ 127.99

This product was last offered at the strikethrough price on
03-10-2026

$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
Thrust arm with ball joint
Packaged by Turner - Corporate Logo
T#:21735879
Part#: E30SUPRBM1042KT
Ships in 6 Business Days
Sale - Save 8% $ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.16 USD
Free Shipping
Sale - Save 8%
$ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.16 USD
Free Shipping
Experience a new level of comfort and control with our Level 3 Comprehensive Suspension Service for your beloved E30 BMW. Say goodbye to clunks, squeaks, and wandering issues plaguing your vehicle's front and rear ends. We provide an all-in-one solution to address these problems, offering superior performance and durability, ensuring your E30 drives better than ever before. Front-End Upgrades: Lemforder Front Lower Control Arms: Replace worn-out control arms with Lemforder precision-engineered components for enhanced stability and handling. Solid Rubber E36 M3 Front Control Arm Bushings: Improve steering feel and responsiveness with these solid rubber bushings, guaranteeing a more connected driving experience. Lemforder Front Sway Bar End Links: Upgrade your sway bar end links to Lemforder for enhanced durability and reduced play, further enhancing your E30's handling. Sachs Front Strut Mounts: Ensure smooth and controlled ride quality with Sachs front strut mounts, providing improved shock absorption and longevity. Lemforder Inner and Outer Tie Rod Assemblies: Replace your tie rod assemblies with Lemforder precision for precise steering and handling. All Required Retaining Hardware: We include all the necessary hardware to ensure a seamless installation, saving you time and hassle. Rear-End Enhancements: Rear Trailing Arm Bushings: Upgrade your rear trailing arm bushings for improved stability and handling characteristics. Rear Stabilizer Links: Replace worn stabilizer links for better control and reduced body roll during cornering. Upgraded Rear Shock Mounts from the E46 M3: Experience improved ride comfort and handling with upgraded rear shock mounts from the E46 M3. ECS Rear Shock Mount Reinforcement Plates: Ensure the longevity and reliability of your shock mounts with ECS reinforcement plates, protecting against deformation. Rear Shock Mount Hardware and Gasket: We provide all necessary hardware and gaskets to complete the installation seamlessly. Rear Subframe Mounts: Enhance rear-end stability and performance with upgraded rear subframe mounts. Differential Bushing: Improve power delivery and drivetrain response with a new differential bushing.
Show More Show Less


TRW M3/1M Front Control Arm Upgrade Kit - with Level Sensor Rod - BMW...
Will add about .75 degrees of negative camber to the front for improved handling and tire wear
TRW - Corporate Logo
T#:557629
Part#: 31102283577MKT1
In Stock
$ 430.04

This product was last offered at the strikethrough price on
04-28-2026

$ 404.28 USD
Free Shipping
$ 404.28 USD
Free Shipping
The M3 control arm upgrade is for people who want a very serious change in the ride/handling of the car. These are the factory OEM E9X M3 upper control arms, so the ride will not be much different than a standard M3. But it is a very large jump compared to the stock E9X arms and bushings, since they are not fluid-filled and have a harder rubber compound than the stock or Meyle HD bushings. These are direct replacements for the original arms, do not require any modification to install, and will add about .75 degrees of negative camber to the front for improved handling and tire wear
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5389743
Part#: 37142283867TMSKT
In Stock
Sale - Save 12% $ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,158.03 USD
Free Shipping
Sale - Save 12%
$ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,158.03 USD
Free Shipping
Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.
Show More Show Less
GODSPEED - Corporate Logo
T#:590480
Part#: AK-135
Ships in 8 Business Days
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping

Maintaining optimal vehicle alignment is crucial, especially when dealing with challenging road or track conditions. To prevent excess tire wear and ensure precise vehicle handling, turn to the Godspeed Project Rear Toe Arms.

These rear toe arms offer stability at high speeds, thanks to their precise alignment capabilities. Unlike traditional rubber bushings that wear quickly, these arms feature solid spherical bushings for exceptional durability. Their heat-treated ball and hard chrome-plated alloy steel composition guarantee strength and longevity.

Not only do these rear toe arms provide cost-effective performance improvements, but they also offer extended adjustment ranges and versatility. Their solid design enhances road feel, giving you more control and confidence in your BMW's performance.

Please note that realignment is recommended after installation, and these rear toe arms are intended for "Track Use Only" due to the increased road noise and vibration caused by solid bushings.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:401618
Part#: TSU4695PBX/16KT
In Stock
Sale - Save 19% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD
Free Shipping
Sale - Save 19%
$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD
Free Shipping

For all 2001 to 2005 325xi and 330xi. For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers with pre-installed bushings (one left, one right) and mounting bolts.

 These bushing brackets fit all 2001, 2002, 2003, 2004, and 2005 model BMW 325xi and 330xi.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5416780
Part#: 31126777851TMSKT
In Stock
$ 591.99

This product was last offered at the strikethrough price on
05-13-2026

$ 535.99 USD
Free Shipping
$ 535.99 USD
Free Shipping
The front control arms on your E46 will fail at some time or another, since this part is the core of the front ends handling a refresh can greatly improve your driving experience. The question is, why settle for a standard soft bushing replacement? When you install this refresh kit you're adding in Turner Motorsport performance poly FCAB's adding enough stiffness to hold tight in the corners yet just soft enough to add almost zero NVH. Kit contents: Left & Right Meyle HD control arms with pressed in ball joints Turner 80a poly control arm bushings - pre-installed into the brackets All the necessary mounting hardware
Show More Show Less
Packaged by Turner - Corporate Logo
T#:30430683
Part#: 37142283867EKT2
In Stock
Sale - Save 14% $ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD
Free Shipping on orders $49 and up
Sale - Save 14%
$ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD
Free Shipping on orders $49 and up

Enhance your BMW's performance with our premium control arm upgrade kit from Turner Motorsport! This kit provides a significant handling upgrade without sacrificing ride quality. Perfect for enthusiasts looking to replace their factory control arms with sturdier, high-performance alternatives, this kit features stiffer bushings and ball joints for improved precision.

Key Benefits:

Improved Handling: Experience more precise and responsive steering, giving your BMW a sportier feel. Increased Durability: Our control arms are much sturdier than factory units, ensuring long-lasting performance. Negative Camber Adjustment: Adds approximately 0.75 degrees of negative camber to the front, enhancing cornering grip and stability. Complete Kit: Includes all four M3-specific lower control arms with mounting hardware. M3 Headlight Leveling Rod: Necessary for proper installation, ensuring your headlights are correctly aligned. Important Note for Z4 Models: For Z4 owners, please be aware that the M3 headlight level sensor rod is positioned differently. A custom solution will be required to attach the sensor rod to the control arm. Currently, we do not offer a direct solution for this issue.

Upgrade your BMW's suspension with confidence! Enjoy a smoother, more controlled ride with our premium control arm upgrade kit!

Show More Show Less

Packaged by Turner - Corporate Logo
T#:338043
Part#: 31102283576
In Stock
Starting at $ 88.99 USD
Free Shipping
Starting at $ 88.99 USD
Free Shipping
This right/passenger's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
GODSPEED - Corporate Logo
T#:22591963
Part#: AK-136
In Stock
$ 180.00 USD
Free Shipping on orders $49 and up

Don't let poor road or track conditions affect your vehicle's alignment, leading to excessive tire wear and compromised handling. Improve your suspension and achieve precise alignment with Godspeed Project's rear camber arms!

These camber arms enhance stability at high speeds, thanks to their precise alignment adjustments. The solid spherical bushings resist wear and outperform conventional rubber bushings. With heat-treated ball and hard chrome plated alloy steel construction, these camber arms offer exceptional strength and durability.

This cost-effective performance upgrade provides extended adjustment ranges, versatility, and improved road feel, thanks to their solid design. It's important to note that realignment is recommended after installation, and these camber arms are ideal for "Track Use Only" due to the increased road noise and vibration caused by solid bushings.

Show More Show Less

GODSPEED - Corporate Logo
T#:638015
Part#: AK-047-A
In Stock
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping

Lowering a vehicle can often lead to the OEM suspension falling out of factory specifications, resulting in compromised handling and uneven tire wear. Godspeed offers the ideal solution with their range of adjustable arms and links designed to correct camber issues and restore your vehicle's performance.

Constructed from heavy-duty steel alloy, these components are built to withstand the test of time. To further ensure durability and protect against corrosion, Godspeed employs a meticulous three-stage powder coating process. These arms and links are engineered as direct replacements for factory components, making installation straightforward with the right tools. What sets them apart is the inclusion of spherical bearings, which provide a tighter feel and superior durability compared to the rubber bushings commonly found in competitors' offerings.

Key Features:

  • Heavy Duty Steel Alloy Construction: Ensures exceptional durability
  • Spherical Bearing for Exceptional Durability: Delivers a tighter feel and enhanced longevity
  • Three-Stage Powder Coating for Corrosion Protection: Guards against corrosion for long-lasting performance
  • Adjustable Length for Camber and Track Width: Provides flexibility to fine-tune your vehicle's setup
  • Enhances Handling and Eliminates Uneven Tire Wear: Restore your vehicle's performance and tire longevity
  • A Must-Have for Lowered Vehicles: Essential for optimizing suspension geometry after lowering
  • Allows Camber Correction for Improved Handling: Offers adjustment up to +/- 3 degrees

Upgrade your vehicle's suspension with Godspeed's Adjustable Arms and Links to experience improved handling and resolve camber issues with ease.

Show More Show Less

TRW - Corporate Logo
T#:341241
Part#: 33322283547KT4
In Stock
$ 600.99

This product was last offered at the strikethrough price on
03-13-2026

$ 514.99 USD
Free Shipping
$ 514.99 USD
Free Shipping
These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting). 
 
Show More Show Less
Packaged by Turner - Corporate Logo
T#:582865
Part#: T31122343352KT
In Stock
Sale - Save 27% $ 570.99

This product was last offered at the strikethrough price on
05-01-2026

$ 414.44 USD
Free Shipping
Sale - Save 27%
$ 570.99

This product was last offered at the strikethrough price on
05-01-2026

$ 414.44 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms
Front Control Arm Bushings

Show More Show Less
GODSPEED - Corporate Logo
T#:600123
Part#: AK-034
In Stock
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
These are a cheap, performance addition that give you greater adjustment ranges and versatility as well as more positive feedback of road feel thanks to their solid design.


Packaged by Turner - Corporate Logo
T#:582866
Part#: T31126768989KT
Ships in 5 Business Days
Sale - Save 16% $ 514.26

This product was last offered at the strikethrough price on
02-27-2026

$ 431.13 USD
Free Shipping
Sale - Save 16%
$ 514.26

This product was last offered at the strikethrough price on
02-27-2026

$ 431.13 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms
Front Control Arm Bushings
Front Sway Bar End Links & Bushings
Front Ball Joints
New Hardware

Show More Show Less
TRW - Corporate Logo
T#:377447
Part#: 31102283577KT1
In Stock
$ 423.99

This product was last offered at the strikethrough price on
04-28-2026

$ 385.99 USD
Free Shipping
$ 385.99 USD
Free Shipping
Over the years, the road takes a serious toll on your suspension. Potholes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience and improve safety and ride comfort, replace suspension components as they wear. After years of service, non-serviceable ball joints and other components begin to wear out. Because some components cannot be replaced, the only solution is the replacement of the entire arm. This OEM TRW kit includes all four front control arms for the E9X M3 / E82 1M. Replacing all four at once will provide the most service life out of replacement parts and ensure they are all performing properly. This kit is intended for installation on Halogen headlight-equipped models, as a headlight level sensor rod is not included.
Show More Show Less
Dinan - Corporate Logo
T#:598376
Part#: D280-0022
Back Ordered
11% off MSRP $ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 425.99 USD
Free Shipping
11% off MSRP
$ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 425.99 USD
Free Shipping
An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness. Reduces brake shimmy. Nylon-lined bearings for quiet operation. Machined aluminum housings. Sealed bearings.
Show More Show Less

TRW - Corporate Logo
T#:395055
Part#: 31126855742KT
Back Ordered
$ 260.99

This product was last offered at the strikethrough price on
03-06-2026

$ 247.99 USD
Free Shipping
$ 247.99 USD
Free Shipping
The thrust arm keeps the lower wheel straight and contacting the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement.

Packaged by Turner - Corporate Logo
T#:338352
Part#: 31102283578X
In Stock
$ 145.99

This product was last offered at the strikethrough price on
04-28-2026

Starting at $ 105.99 USD
Free Shipping
Starting at $ 105.99 USD
Free Shipping
This right/passenger's front lower control arm - also know as a wishbone - 31102283578 . This is the control arm with the outer ball joint pointing up. This is the OEM or OE M3 part and fits E82 1M and E90/E92/E93 M3. It's also an upgrade for all non-M E82 and E9X models (except Xi). This control arm includes the inner rotating, sealed mono-balljoint and outer ball joint. A direct replacement.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2012 E92 BMW M3 Coupe
2008-2012 E93 BMW M3 Convertible
Show More Show Less
Packaged by Turner - Corporate Logo
T#:340278
Part#: TMS12080
In Stock at Vendor
$ 322.99

This product was last offered at the strikethrough price on
03-17-2026

Starting at $ 302.98 USD
Free Shipping
Starting at $ 302.98 USD
Free Shipping

As Used on Project E92 335i
These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This package includes:

  • Left M3 Guide Rod - 33322283547
  • Right M3 Guide Rod - 33322283548

Buy as a package and save $$!

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i 1M Coupe
2006-2011  E90 BMW  325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012  E91 BMW  325xi 328i 328xi 328i xDrive - Wagon
2007-2013  E92 BMW  328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013  E93 BMW  328i 335i M3 - Convertible

 

Show More Show Less

Packaged by Turner - Corporate Logo
T#:557628
Part#: 33322283547KT9
In Stock
Sale - Save 8% $ 966.99

This product was last offered at the strikethrough price on
03-13-2026

$ 891.15 USD
Free Shipping
Sale - Save 8%
$ 966.99

This product was last offered at the strikethrough price on
03-13-2026

$ 891.15 USD
Free Shipping
Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:343068
Part#: TSU9995PB3KT
In Stock
Sale - Save 18% $ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD
Free Shipping
Sale - Save 18%
$ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD
Free Shipping
Control arm bushing brackets do not typically wear or fatigue. But we sell replacement brackets as a convenience to go with new bushings (press one bushing instead of pressing out the old). For racers it's a great idea to keep a spare set of bushings with brackets on hand since pressing bushings at a racetrack is not ideal. Keep a spare set to avoid hassle and downtime.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:583021
Part#: T33526768544KT1
Ships in 1-2 days
Sale - Save 9% $ 175.99

This product was last offered at the strikethrough price on
05-28-2026

$ 161.01 USD
Free Shipping
Sale - Save 9%
$ 175.99

This product was last offered at the strikethrough price on
05-28-2026

$ 161.01 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Sway Bar End Links
Rear Trailing Arm Bushings
Rear Strut Mounts
New Hardware

Show More Show Less

Rear Suspension Link Kit
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:2513316
Part#: R280-0006
Ships on Aug 14, 2026
11% off MSRP $ 643.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 571.99 USD
Free Shipping
11% off MSRP
$ 643.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 571.99 USD
Free Shipping
These high-performance rear toe links are designed to eliminate the vagueness and flex associated with the stock linkages, which used rubber bushings and an alloy designed to flex under load. During hard acceleration and braking, this can actually change the toe angle, and cause the car to feel unstable during hard cornering. The flex is eliminated by utilizing Teflon coated, machined steel rod ends with billet aluminum rod for the links. The Rods have been machined with a hex in the center to aid adjustment.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:338099
Part#: 33326777424S1
Ships on Oct 15, 2026
Starting at $ 79.99 USD
Free Shipping
Starting at $ 79.99 USD
Free Shipping
This rear guide rod for the E39 chassis helps to control the toe alignment of the car (the horizontal in/out angle of the tire). There is a rubber bushing on the inside and a ball joint on the outside mounting point. When the bushings on the arm wear out they can contribute to a 'wandering' or 'loose' or unstable feeling in the rear. There may also be a clunking noise associated with bumps. This arm is just one part of the rear suspension, and other parts should be checked to confirm which one is causing the issues. For a complete overhaul of the rear suspension, check out our rear control arm package here .

Brand: Febi-Bilstein, Meyle
Price is for each - order 2 to replace both on the car.
This item fits the following BMWs:
12/2001-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
2002-10/2006 E65 BMW 745i 745li 750i 750li 760i 760li
Show More Show Less
Packaged by Turner - Corporate Logo
T#:338064
Part#: 31129069035
Ships on Jan 12, 2027
Starting at $ 46.99 USD
Free Shipping on orders $49 and up
Starting at $ 46.99 USD
Free Shipping on orders $49 and up
Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
Show More Show Less


Packaged by Turner - Corporate Logo
T#:5389778
Part#: E30SUSREF3TMSKT
Back Ordered
Sale - Save 9% $ 961.99

This product was last offered at the strikethrough price on
07-07-2026

$ 873.26 USD
Sale - Save 9%
$ 961.99

This product was last offered at the strikethrough price on
07-07-2026

$ 873.26 USD
Complete suspension refresh - front and rear. Select upgraded components and high quality OE and OEM parts! No more clunks, squeaks, or wandering from the front or tail end of your E30. Address problems all in one service - don't replace another component every few weeks, make it better than new! Level 3 includes: Front: Lemforder Front lower control arms Solid rubber E36 M3 front control arm bushings for improved handling and steering feel Lemforder Front sway bar end links Sachs Front strut mounts Lemforder Inner and outer tie rod assemblies All required retaining hardware Rear: Rear trailing arm bushings Rear stabilizer links Rear shock mounts - upgraded units from the E46 M3 Rear shock mount reinforcement plates for improved mount life and protection from shock mount deformation Rear shock mount hardware and gasket Rear subframe mounts Differential bushing
Show More Show Less
TRW - Corporate Logo
T#:3182
Part#: 31126769798
In Stock
$ 157.11 USD
Free Shipping on orders $49 and up
This right/passenger's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OEM replacement and fits all non-Xi BMW E90 E92 E93 325i 328i 330i 335i models, E82 128i 135i, and E89 Z4. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer at a fraction of the cost for the OE BMW part.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i 335is
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5498489
Part#: E36Z3CAKT
In Stock
Sale - Save 6% $ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 312.39 USD
Free Shipping
Sale - Save 6%
$ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 312.39 USD
Free Shipping
Turner Motorsport refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components. Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 1 contains: 2 Meyle HD front control arms 2 M3 front control arm bushings
Show More Show Less

TRW - Corporate Logo
T#:2342
Part#: 31126774829
In Stock at Vendor
$ 170.99

This product was last offered at the strikethrough price on
03-01-2026

$ 166.99 USD
Free Shipping
$ 166.99 USD
Free Shipping
This upper front control arm (also known as a thrust arm or tension strut) is a direct replacement for the original part and is TRW brand.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

This item fits the following BMWs:
2004+ E63 6 Series BMW 645ci 650i M6
2004+ E64 6 Series BMW 645ci Convertible 650i Convertible M6 Convertible
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15777305
Part#: 31122284529-KT
In Stock
$ 404.99

This product was last offered at the strikethrough price on
05-07-2026

$ 393.99 USD
Free Shipping on orders $49 and up
$ 393.99 USD
Free Shipping on orders $49 and up
Utilizes the factory control arms sourced from the M3, providing an additional -0.5 degrees of negative camber to enhance cornering stability and steering precision. This kit replaces both front rear-position control arms and includes the integrated headlight leveling sensor bracket for proper suspension geometry and functionality.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:27105174
Part#: 31126854727KT3
In Stock
Sale - Save 3% $ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD
Free Shipping on orders $49 and up

Is your BMW's suspension feeling loose and imprecise? It might be time for a refresh, and the team at Turner Motorsport has just the solution. Our front control arm refresh kit bundles all the essential components you need to restore your vehicle's handling and ride quality.

Why choose our kit? Because we understand the wear and tear that your BMW endures over time. Rough roads and harsh conditions take a toll on your suspension. With our comprehensive kit, you can address the common wear points in one go, ensuring optimal performance and longevity.

What's included in our kit? Everything you need: control arms, bushings, hardware, and more. By replacing these components together, you eliminate the risk of new parts being compromised by old, worn ones. Don't let sloppy handling and vague steering ruin your driving experience. Trust Turner Motorsport to provide a complete solution that restores the precision and feel of your BMW's suspension.

Signs that your front control arms may need replacing:

Clunking noise over rough roads Vague steering, especially at highway speeds Irregular tire wear Popping noises when going over bumps Vehicle pulling to one side during hard braking Don't wait for these symptoms to worsen. Upgrade your BMW's suspension with this front control arm refresh kit today.

Show More Show Less

TRW - Corporate Logo
T#:2347
Part#: 31126774830
Ships in 1-2 days
$ 196.99

This product was last offered at the strikethrough price on
07-03-2026

$ 158.99 USD
Free Shipping
$ 158.99 USD
Free Shipping
This upper front control arm (also known as a thrust arm or tension strut) is a direct replacement for the original part and is TRW brand.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

This item fits the following BMWs:
2004+ E63 6 Series BMW 645ci 650i M6
2004+ E64 6 Series BMW 645ci Convertible 650i Convertible M6 Convertible
Show More Show Less
Packaged by Turner - Corporate Logo
T#:583060
Part#: T33322406291KT
Ships Today
Sale - Save 6% $ 1,212.99

This product was last offered at the strikethrough price on
03-13-2026

$ 1,139.31 USD
Free Shipping
Sale - Save 6%
$ 1,212.99

This product was last offered at the strikethrough price on
03-13-2026

$ 1,139.31 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Suspension Bushings
Control Arm Bushings
Hardware
Rear Shock Mounts
Control Arms & Trailing Arms

Show More Show Less

TRW - Corporate Logo
T#:594010
Part#: 33326770060
In Stock
Sale - Save 25% $ 121.08

This product was last offered at the strikethrough price on
05-03-2026

$ 91.32 USD
Free Shipping
Sale - Save 25%
$ 121.08

This product was last offered at the strikethrough price on
05-03-2026

$ 91.32 USD
Free Shipping
One item to replace is the control arm. After years of service, the non-serviceable ball joints and other components can begin to wear out. Because some components cannot be replaced, the only solution is replacement of the entire arm.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:582909
Part#: T31122343352KT2
Ships in 1-2 days
Sale - Save 13% $ 944.99

This product was last offered at the strikethrough price on
05-01-2026

$ 818.22 USD
Free Shipping
Sale - Save 13%
$ 944.99

This product was last offered at the strikethrough price on
05-01-2026

$ 818.22 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Control Arms & Bushings
Outer Tie Rods
Sway Bar End Links
Upper Strut Mounts & Reinforcement Plates

Show More Show Less
Packaged by Turner - Corporate Logo
T#:30463953
Part#: 31102348046KT2
In Stock
Sale - Save 15% $ 877.99

This product was last offered at the strikethrough price on
06-24-2026

$ 744.54 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 877.99

This product was last offered at the strikethrough price on
06-24-2026

$ 744.54 USD
Free Shipping on orders $49 and up

Upgrade your BMW’s front suspension with our high-quality Front Suspension Control Arm Kit, designed to restore stability and precision to your vehicle. Over time, worn control arms can lead to creaking, groaning, and instability, especially at highway speeds. Our comprehensive kit ensures a complete overhaul with all necessary components pre-assembled for easy installation.

Key Features:

Enhanced Stability: Say goodbye to wandering and instability on the road with new, durable control arms. Complete Solution: Our kit includes all four front control arms, two ball joints, and essential installation hardware. Premium Quality: Assembled by enthusiasts at ECS Tuning, ensuring top-notch performance and reliability. Ready for Installation: All related ball joints and bushings are pre-installed, saving you time and effort. Kit Includes:

4 Front Control Arms Installation Hardware Give your BMW the suspension upgrade it deserves. Enhance your driving experience with our Front Suspension Control Arm Kit and enjoy the confidence of driving a well-maintained vehicle. Order now and experience the difference in ride quality and stability.

Show More Show Less
TRW M3/1M Front Control Arm Upgrade Kit - w/o Level Sensor Rod - BMW ...
Will add about .75 degrees of negative camber to the front for improved handling and tire wear
TRW - Corporate Logo
T#:390706
Part#: 31102283577T
In Stock
$ 423.55

This product was last offered at the strikethrough price on
04-28-2026

$ 385.96 USD
Free Shipping
$ 385.96 USD
Free Shipping
The M3 control arm upgrade is for people who want a very serious change in the ride/handling of the car. These are the factory OEM E9X M3 upper control arms, so the ride will not be much different than a standard M3. But it is a very large jump compared to the stock E9X arms and bushings, since they are not fluid-filled and have a harder rubber compound than the stock or Meyle HD bushings. These are direct replacements for the original arms, do not require any modification to install, and will add about .75 degrees of negative camber to the front for improved handling and tire wear
Show More Show Less