Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

SPL Parts - Corporate Logo
T#:587627
Part#: SPL-FLCA-G29
In Stock at Vendor
$ 719.00 USD
Free Shipping
$ 719.00 USD
Free Shipping
SPL Parts Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the G29 Z4 / A90 Toyota Supra, and allow for full articulation with the proper ball joint angle. The main arm is slotted to allow the use of pinch bolts, and rotating clamps on SPL Parts' exclusive Double Adjuster lock down camber and track width settings.
Show More Show Less
Fall Line - Corporate Logo
T#:28038194
Part#: FLM-E9X-1BUNI
Ships in 3 Business Days
$ 423.00 USD
Free Shipping
$ 423.00 USD
Free Shipping
Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M3’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M3. *V2 improved design also incorporates hard coat clear anodized finish*
Show More Show Less
Verkline - Corporate Logo
T#:22525957
Part#: WAS-412
Ships in 10 Business Days
$ 499.00 USD
Free Shipping on orders $49 and up
Verkline is proud to unveil their Front Bump Steer Adjustable Tie Rod Ends, the culmination of extensive development and rigorous testing. These cutting-edge components have undergone a meticulous journey, which includes 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with these high-performance tie rod ends. Key Advantages: User-Friendly Length Adjustability: Enthusiasts can easily fine-tune the tie rod end's length to achieve optimal corner weights without sway bar preload, ensuring even suspension heights. Enhanced Strength and Rigidity: Verkline's design guarantees increased strength and rigidity, resulting in improved handling performance. Replaceable High-Quality Uniballs: In case of ball joint wear, there's no need to replace the entire tie rod end. Verkline utilizes easily obtainable, high-quality uniballs for convenience. Noteworthy Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Links: The tie rod ends arrive pre-assembled, simplifying the installation process. Robust Full-Length Pins: Precision-machined from high-strength steel, these pins ensure durability and reliability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, these turnbuckles offer superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Sway Bar and Coil-Over Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front tie rod ends Two pairs of CNC machined Cr-Mo upright pins Thin locking nuts High-quality motorsport spherical bearings Set of pin spacers for bump steer adjustment Printed installation instructions Automotive enthusiasts can now experience the precision and performance of Verkline's Front Bump Steer Adjustable Tie Rod Ends, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. These components are designed to be compatible with OEM sway bars and coil-over setups, providing versatility for various vehicle configurations. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91
Show More Show Less

Delphi - Corporate Logo
T#:591333
Part#: 33326768726
Ships in 1 Business Day
$ 56.99

This product was last offered at the strikethrough price on
05-07-2026

$ 54.99 USD
Free Shipping on orders $49 and up
$ 54.99 USD
Free Shipping on orders $49 and up

Lemforder - Corporate Logo
T#:594849
Part#: 31126854729
Ships in 1 Business Day
$ 66.16

This product was last offered at the strikethrough price on
07-08-2026

$ 65.59 USD
Free Shipping on orders $49 and up
$ 65.59 USD
Free Shipping on orders $49 and up
When control arm bushings begin to fail suspension noise and steering vibrations increase. The vehicle will become unstable when cornering and difficult to drive under normal conditions. This leads to premature tire wear caused by misalignment and places stress on other suspension components reducing there overall service life. New control arm bushings will drastically increase the vehicles handling and help to prevent damage to other suspension components.
Show More Show Less
Genuine MINI - Corporate Logo
T#:414735
Part#: 31126757551
Ships in 1-2 days
13% off MSRP $ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:191213
Part#: 31126851693
Ships in 1-2 days
9% off MSRP $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping
9% off MSRP
$ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping


Genuine BMW Rubber Mounting -
This item fits the following BMW Chassis:
F15,F16

Genuine BMW - Corporate Logo
T#:60348
Part#: 33326770829
Ships in 1-2 days
14% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD
Free Shipping on orders $49 and up

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


Genuine BMW Rubber Mount, Roll-Over Strut
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F80 M3,F82 M4,F83
 

 

Show More Show Less

Genuine BMW - Corporate Logo
T#:7707
Part#: 31122226528
Ships in 1-2 days
6% off MSRP $ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 46.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 46.99 USD
Free Shipping on orders $49 and up
Does the front end on your E34 shake under braking or even while cruising on the highway? The culprit is usually worn upper control arm / thrust arm bushings. Upgrade from the stock type bushing to this heavy duty M5 style bushing from Lemforder. Lemforder is an OEM supplier to BMW so you can be assured of a top quality product that will ensure smooth vibration free driving in your e34. Sold Individually.

This item fits the following BMWs:
1989-1995 E34 BMW 525i 530i 535i 540i M5
Show More Show Less

Genuine BMW - Corporate Logo
T#:360878
Part#: 33326770786
Ships in 1-2 days
1% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD
Free Shipping on orders $49 and up
1% off MSRP
$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:360879
Part#: 33326770817
In Stock
1% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD
Free Shipping on orders $49 and up
1% off MSRP
$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD
Free Shipping on orders $49 and up
This OE bushing is a standard replacement for M vehicles and an upgrade for Non-M vehicles. 
Genuine BMW - Corporate Logo
T#:60428
Part#: 33326792525
Ships in 1-2 days
9% off MSRP $ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping
9% off MSRP
$ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping


Genuine BMW Trailing Arm With Rubber Bushing -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36



Genuine BMW - Corporate Logo
T#:19975
Part#: 33329058822
Ships in 1-2 days
2% off MSRP $ 63.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 63.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping on orders $49 and up


Genuine BMW Set Rubber Mounting Eccentric - D=30Mm
This item fits the following BMW Chassis:
E30 M3,E30,E36

Genuine BMW - Corporate Logo
T#:368054
Part#: 31121138478
Ships in 1-2 days
3% off MSRP $ 524.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 507.99 USD
Free Shipping
3% off MSRP
$ 524.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 507.99 USD
Free Shipping

Upgrade your BMW's performance with the Genuine BMW Aluminum Front Lower Control Arm - Right for E34 and E31 models. Crafted with precision, this control arm ensures superior handling and durability for your vehicle. Designed to exact BMW specifications, this part guarantees a perfect fit and optimal performance. Elevate your driving experience with Turner Motorsport.

  • Enhances handling and control
  • Durable aluminum construction
  • Exact fit for E34 and E31 models
  • Optimizes performance
  • Genuine BMW quality assurance
Show More Show Less
Genuine BMW - Corporate Logo
T#:54257
Part#: 31126854723
In Stock
8% off MSRP $ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping
8% off MSRP
$ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping


Genuine BMW Tension Strut With Hydraulic Mount, Left -
This item fits the following BMW Chassis:
F30,F31,F32,F33,F36


Genuine BMW - Corporate Logo
T#:5077
Part#: 31102283579
Ships in 1-2 days
9% off MSRP $ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Free Shipping
9% off MSRP
$ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Free Shipping
These are the stock replacement front control arm bushings (FCAB) for the E82 1M and E9X M3 models. These solid rubber bushings replace the inner bushing on the front upper control arm, also known as the thrust arm or tension stut (it's the arm with the outer ball joint pointing down). These are the OEM bushings with a metal sleeve insert for precise but comfortable steering feel and response. A direct replacement for the E90/E92/E93 M3 and E82 1M. Professional installation recommended since these bushings need to be 'compressed' while they are being pressed in.

This can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The solid rubber of the M3 is a better and longer-lasting bushing than the fluid-filled stock E90 bushing. These M3 bushings are a bit stiffer than the original design so the steering and handling will be sharper while maintaining M3-levels of ride comfort.

Sold per bushing (order 2 for both sides).

This item is a direct fit for the following BMWs:
2008-2012 E82 BMW 1M
2008-2012 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
This item is an upgrade for the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Genuine BMW - Corporate Logo
T#:54261
Part#: 31126854729
Ships in 1-2 days
9% off MSRP $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping
9% off MSRP
$ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping


Genuine BMW Hydrobearing -
This item fits the following BMW Chassis:
F30,F31,F32,F33,F34,F36

Febi - Corporate Logo
T#:382080
Part#: 33326780438
Ships in 1-2 days
$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 51.99 USD
Free Shipping on orders $49 and up
$ 51.99 USD
Free Shipping on orders $49 and up
Located in the lower rear trailing arm

Genuine MINI - Corporate Logo
T#:60334
Part#: 33326767869
Ships in 1-2 days
8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping on orders $49 and up
Genuine MINI ADJUSTING PLATE
Genuine BMW - Corporate Logo
T#:21492
Part#: 31122341828
Ships in 1-2 days
4% off MSRP $ 326.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 312.99 USD
Free Shipping
4% off MSRP
$ 326.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 312.99 USD
Free Shipping
Genuine BMW
This is the factory BMW control upgrade used on the high-performance 330i ZHP Performance Package and offered by BMW as a sport retrofit. These arms are identical dimensions as the regular arms so they are a direct replacement. But they have all metal ball joints instead of plastic or rubber. This means they last a lot longer and are much stronger. We used these in our Grand Am and World Challenge E46 racecars with excellent performance.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

We also recommend replacing the bushings when changing the control arms. The bushings are mounted at the back of the control arm and located the arm to the frame rail on the car. The stock bushings are rubber and will wear out sooner than the control arms themselves. With the control arm off the car now is the perfect time to also replace the bushings. Alternate part number 31122282122.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less

Genuine BMW - Corporate Logo
T#:22771
Part#: 31126787669
Ships in 1-2 days
8% off MSRP $ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping
8% off MSRP
$ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping


Genuine BMW Wishbone, Left -
This item fits the following BMW Chassis:
F25 X3,F26 X4


Genuine BMW - Corporate Logo
T#:21811
Part#: 33322283549
Ships in 1-2 days
2% off MSRP $ 163.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 159.99 USD
Free Shipping
2% off MSRP
$ 163.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 159.99 USD
Free Shipping
NOW LOCATED UNDER T#338097

This item fits the following BMWs:
2012-2013 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
This fits 1M/M3 models only. It is not used on non-M models.
Show More Show Less
Genuine BMW - Corporate Logo
T#:368053
Part#: 31121138477
Ships in 1-2 days
3% off MSRP $ 524.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 507.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 524.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 507.99 USD
Free Shipping on orders $49 and up

Genuine BMW Aluminum Front Lower Control Arm - Left - E34 E31 part number 31121138477

Upgrade your vehicle's performance with the Genuine BMW Aluminum Front Lower Control Arm - Left - E34 E31 part number 31121138477. Made for precision and durability, this control arm ensures a smooth and stable ride. Engineered to fit perfectly, it is a direct replacement for your worn-out or damaged control arm. Experience enhanced handling and responsiveness on the road. Buy now and enjoy the benefits of:

  • Genuine BMW quality
  • Made from durable aluminum
  • Ensures precise handling
  • Direct replacement for OE part
  • Fits E34 and E31 models
Show More Show Less
Genuine BMW - Corporate Logo
T#:15324
Part#: 31107838575
Ships in 1-2 days
6% off MSRP $ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Free Shipping
6% off MSRP
$ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Free Shipping


Genuine BMW Set Rubber Mounting - D=66mm
This item fits the following BMW Chassis:
E85 Z4M,E85 Z4,E86 Z4



Genuine BMW - Corporate Logo
T#:54252
Part#: 31126791397
Ships in 1-2 days
9% off MSRP $ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping
9% off MSRP
$ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping


Genuine BMW Hydrobearing
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6

Genuine BMW - Corporate Logo
T#:195060
Part#: 33322284533
Ships in 1-2 days
8% off MSRP $ 329.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 301.99 USD
Free Shipping
8% off MSRP
$ 329.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 301.99 USD
Free Shipping
Genuine BMW Camber Control Arm.
Genuine BMW - Corporate Logo
T#:198755
Part#: 33322284534
Ships in 1-2 days
9% off MSRP $ 333.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD
Free Shipping
9% off MSRP
$ 333.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD
Free Shipping
Genuine BMW Left Tension Strut With Rubber Mounting

Turner Motorsport - Corporate Logo
T#:558910
Part#: 025736TMSKT
In Stock
$ 1,376.99 USD
Free Shipping
$ 1,376.99 USD
Free Shipping

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints goes back to those we designed and used in our IMSA E90 328i and E92 M3 race cars (GS class Champions in 2011). We wanted to offer as many BMW owners possible a similar level of handling, precision, and control for the track and street.

Utilizing a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

 

 

 

 

 

Watch to learn more about Turner Monoball Bushings

 

We offer these control arms with the monoball bearings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

 

Control Arm Bearing

  • CNC machined corrosion resistant 304 Stainless steel shell, bolt sleeves, & snap rings
  • Sealed spherical ball joint for long service life & maintained OE fitment
  • Suspension pre-load is no longer required when torquing the control arm hardware

 

Thrust Arm Bearing:

  • OEM BMW sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
  • 6061-T6 anodized housing for excellent corrosion resistance
  • Proprietary Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands
  • CNC machined 304ss, providing a precision fit between the ball joint and the subframe

 

Benefits of Both:​

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance.
  • Improved road feel without undesirable NVH.

Fits the following BMW models

2012+ F10 BMW M5
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6

Show More Show Less

Lemforder - Corporate Logo
T#:362332
Part#: 3493301
Ships in 3 Business Days
$ 21.99 USD
Free Shipping on orders $49 and up

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Genuine BMW - Corporate Logo
T#:47898
Part#: 18211176033
Ships in 1-2 days
$ 21.99 USD
Free Shipping on orders $49 and up


Genuine BMW Bracket Exhaust, Rear -
This item fits the following BMW Chassis:
E30

Fits BMW Engines including:
M20


Genuine BMW - Corporate Logo
T#:7708
Part#: 31122614006
Ships in 3 Business Days
3% off MSRP $ 559.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 541.99 USD
Free Shipping
3% off MSRP
$ 559.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 541.99 USD
Free Shipping
GENUINE BMW FRONT AXLE WISHBONE 31122614006.--

This item fits the following BMWs:
BMW 1600, 2002, 2002tii

--.
Front Control Arm Kit
5X Entries Into Our F80 M3 Sweepstakes
Meyle HD - Corporate Logo
T#:55281721
Part#: 3160500137HD
Ships in 4 Business Days
New Item
$ 435.99 USD
$ 435.99 USD
This Meyle HD front suspension arm set is the ultimate "fix-it-once" overhaul kit for your front end.

Genuine BMW - Corporate Logo
T#:13486
Part#: 33321138015
Ships in 6 Business Days
2% off MSRP $ 914.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 894.99 USD
Free Shipping
2% off MSRP
$ 914.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 894.99 USD
Free Shipping
GENUINE BMW WISHBONE:H33320

Lemforder - Corporate Logo
T#:398157
Part#: 31121136605
Ships on Oct 28, 2026
$ 24.99 USD
Free Shipping on orders $49 and up

Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed.

Fits the following Vehicles:
1989 - 1995 E34 BMW 525i, 530i

Show More Show Less
Packaged by Turner - Corporate Logo
T#:582866
Part#: T31126768989KT
In Stock
Sale - Save 14% $ 502.42

This product was last offered at the strikethrough price on
04-15-2026

$ 433.51 USD
Free Shipping
Sale - Save 14%
$ 502.42

This product was last offered at the strikethrough price on
04-15-2026

$ 433.51 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms
Front Control Arm Bushings
Front Sway Bar End Links & Bushings
Front Ball Joints
New Hardware

Show More Show Less
Rear Guide Rod - Left or Right - E39, E60, E63, E65
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338099
Part#: 33326777424S1
Ships on Jan 11, 2027
Starting at $ 79.99 USD
Free Shipping
Starting at $ 79.99 USD
Free Shipping
This rear guide rod for the E39 chassis helps to control the toe alignment of the car (the horizontal in/out angle of the tire). There is a rubber bushing on the inside and a ball joint on the outside mounting point. When the bushings on the arm wear out they can contribute to a 'wandering' or 'loose' or unstable feeling in the rear. There may also be a clunking noise associated with bumps. This arm is just one part of the rear suspension, and other parts should be checked to confirm which one is causing the issues. For a complete overhaul of the rear suspension, check out our rear control arm package here .

Brand: Febi-Bilstein, Meyle
Price is for each - order 2 to replace both on the car.
This item fits the following BMWs:
12/2001-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
2002-10/2006 E65 BMW 745i 745li 750i 750li 760i 760li
Show More Show Less


Meyle Ball Joint - E38, E39, E53, E60, E61, E63, E64, E65, E66 ...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362103
Part#: 33326767748
Ships on Nov 3, 2026
$ 243.99

This product was last offered at the strikethrough price on
08-17-2026

$ 30.00 USD
Free Shipping on orders $49 and up
$ 30.00 USD
Free Shipping on orders $49 and up
Pressed into rear wheel carrier
Meyle Heavy Duty Front Inner Ball Joint - E46 & Z4
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:371723
Part#: 31121126253HMY
Ships on Dec 10, 2026
$ 28.99 USD
Free Shipping on orders $49 and up
$ 28.99 USD
Free Shipping on orders $49 and up

Ball joints tend wear out over the years, creating vibrations and suspension and steering slack. This Meyle HD ball joint is perfect to restore your suspension's feel and provide longer lasting service than stock with a 4 year, unlimited mile warranty.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

*For Meyle HD control arms only*

Features:

  • 4 Year Warranty

  • All metal ball joints are more reliable and longer lasting than stock

  • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements


Fits the following BMWs:
E46 BMW
 RWD Non-M
E85/86 BMW Z4 2.5i 3.0i/Si

Show More Show Less
Meyle Rear Lower Control Arm - E36, E46, E83, Z4
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:369355
Part#: 33326770813
Ships on Nov 3, 2026
$ 44.99 USD
Free Shipping on orders $49 and up
Complete including bushing

Myle HD Tension Strut Hydraulic Bushing - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:8677202
Part#: 31106893550B
Ships in 8 Business Days
$ 88.99 USD
Free Shipping on orders $49 and up
Over time, these hydraulic bushings will wear and can start to make noise once the hydraulic fluid leaks out of the bushing. Failure of these bushings can cause a shake during braking or regular driving, uneven tire wear, and clunking noises when turning. Replace your old, torn bushings with these Meyle HD bushings for increased reliability and longevity! Features: Optimized design reduces stress in critical areas Significantly longer lifetime due to less cracks in the rubber material Longer driving safety 4-year warranty
Show More Show Less

ECS F2x/F3x 5-Bolt xDrive Performance Coilovers & Adjustable Rear Toe...
For vehicles with xDrive and 5 bolt upper strut mounts - Production date 01/15+
Enthusiast Bundles - Corporate Logo
T#:25009271
Part#: 029313ECS02EBKT
Ships on Feb 22, 2027
Sale - Save 24% $ 1,746.99

This product was last offered at the strikethrough price on
05-05-2026

$ 1,325.44 USD
Sale - Save 24%
$ 1,746.99

This product was last offered at the strikethrough price on
05-05-2026

$ 1,325.44 USD

Unveiling the BMW Coilover Line, meticulously crafted for the daily driver's needs. Engineered to elevate performance, aesthetics, and comfort, these coilovers offer a perfect blend of firmness and compliance. With 32 levels of damping and height adjustments tailored to each car, they deliver an aggressive look and significantly enhanced handling.

Key Features:

  • ECS Tuning Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • 32 levels of rebound damping adjustment
    • Adjustable front sway bar end links
    • Integrated camber plates for +/-1.5 degrees of adjustment
    • Lowering adjustment of 1.5" - 4"
    • Heat-treated, progressive rate coil springs (8k Front, 10K Rear)
    • Zinc-coated threaded portions for corrosion protection
    • Powder-coated Reflex Silver Metallic finish on coil springs
    • Red anodized, billet aluminum spring seats with locking collars
    • Anodized adjustable sway bar end links with heavy-duty bushings
    • Zinc-coated flanged nuts for shock & strut shaft pins
    • Rear shock adjuster housings black E-coated for durability
    • Integrated bump stops and dust boots

Turner Performance Adjustable Rear Toe Links:

Enhance stability and response with Turner's Performance Rear Toe Links. These links eliminate bushing deflection, providing increased rear toe adjustment crucial for lowered cars or performance alignments. With gun-drilled 2024 Aluminum center links, rotating clamp design, and low-friction Teflon-lined FK Heim joints, this pair ensures superior strength, durability, and ease of adjustment. A must-have for optimal grip on the track and extended tire life on the street.

Show More Show Less
Complete Front Upper Control Arm Upgrade - Left & Right - E39 525i/52...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:2216
Part#: E396HDARMS
Ships on Nov 3, 2026
$ 339.99 USD
Free Shipping
$ 339.99 USD
Free Shipping

The front control arm bushings is the Achilles heel on the E39 models. The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering.

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel.

This is a package of Meyle HD control arms with the HD bushings already pressed in. This makes for an easy swap out-swap in install. These arms replace the existing stock upper control arms - otherwise known as a tension strut or strut support arm. It's the arm with the twist. The BMW part numbers for these arms are 31 12 1 141 717 and 31 12 1 141 718.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty.

Features:

  • 4 Year Warranty

  • All metal ball joints are more reliable and longer lasting than stock

  • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

This item fits the following BMWs:
1997-2003 E39 5 Series BMW 525i, 525iT, 528i, 528iT, 530i sedans and touring wagons
2000-2003 E52 Z8 Z8 - Z8 Alpina

Show More Show Less

Sachs - Corporate Logo
T#:370564
Part#: 33329061945
Ships on Mar 15, 2027
$ 46.99 USD
Free Shipping on orders $49 and up

OEM quality rear suspension bushing replacement. This bushing is a common cause of noise in the rear.

Bushing Diameter: 30MM

Lemforder - Corporate Logo
T#:393910
Part#: 33321137819
Ships in 1 Business Day
$ 207.54 USD
Free Shipping on orders $49 and up

Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Corteco - Corporate Logo
T#:15478726
Part#: 33326792553C
Back Ordered
$ 21.99 USD
Free Shipping on orders $49 and up
This ball joint is located in the trailing arms. Fits both left & right side.

Fall Line - Corporate Logo
T#:28038203
Part#: FLM-E9X-1FRTAK
Back Ordered
$ 449.99 USD
Free Shipping
$ 449.99 USD
Free Shipping
Turner Motorsport - Corporate Logo
T#:598570
Part#: 019891TMS02
In Stock
Sale - Save 21% $ 377.99

This product was last offered at the strikethrough price on
05-03-2026

$ 299.99 USD
Free Shipping
Sale - Save 21%
$ 377.99

This product was last offered at the strikethrough price on
05-03-2026

$ 299.99 USD
Free Shipping
Swapping E46 Non-M control arms to your E36 is a quick way to increase camber and increase your front tire track width. To makes this an easier process, we are proud to introduce our Turner Motorsport Front Control Arm Monoball Upgrade kit! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer e30, e36, and e46 owners similar levels of handling precision and control for the track and street, but weren’t satisfied with the other options out there. Instead of a Delrin® bushing or unsealed spherical bearing alone, we selected an oversized sealed greaseable spherical monoball to offer unparalleled durability and precision, but designed a Delrin® adapter sleeve to help isolate the added noise, vibration, and harshness that a full solid monoball bearing will have. While race-ready, our hybrid Delrin®/monoball control arm bearings are more at home on the street than other kits that are advertised as “race-only” bearings. We did extensive street, autocross, and track testing to ensure the spherical bearing used in this bushing design excelled in each setting. The stock rubber bushings, even those found in the M3, allow significant fore/aft movement of the front wheels to help absorb road impacts, especially when being pushed hard. This soft flexible design maximizes daily driving comfort, but also allows considerable alignment change. This unwanted deflection stands between you and a crisp, confidence-inspiring driving experience. The advantage of a monoball bearing is that it will not deflect under load, eliminating all unwanted deflection while still allowing complete freedom of movement in the desired angles. What you get is superior steering precision with better handling from more consistent alignment and direct braking feedback, with exceptional service life. Thanks to the Delrin® insert and double lip seals, there's none of the extra noise or reduced service life often found on other spherical bearings. In short, if you're seeking front control arm bushings that offer precise, predictable handling, crisper braking feel, with a long service life free from noise - look no further. We have you covered. Watch to learn more about Turner Monoball Bushing Bearing Extremely robust, greaseable, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static). Housing 6061-T6, anodized bearing housing with needle grease zerk for easy maintenance. In house designed knurled OD to provide the perfect fit for the wide range of housing diameters among brands. Precision CNC machined Delrin bearing insert arm adapter, providing a tight fit between the bearing and the control arm. Performance Instant, crisp steering and braking response. Easy to maintain, long-lasting performance. Improved road feel without undesirable NVH. Grease before installation and with each oil service with high-quality Moly grease for maximum service life. Grease fitting tool - ES#3410138
Show More Show Less
Front Tension Strut - Right
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:6304595
Part#: 31126854724
In Stock
$ 194.99

This product was last offered at the strikethrough price on
05-07-2026

$ 114.99 USD
Free Shipping
$ 114.99 USD
Free Shipping
Meyle HD control arms are a favorite among BMW enthusiasts, they come in at an affordable cost, but offer a substantial increase in performance. Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution 4-year warranty on all MEYLE-HD parts Engineered and quality approved in Germany No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
Show More Show Less


Corteco - Corporate Logo
T#:15445614
Part#: 33326777424
Back Ordered
$ 28.99 USD
Free Shipping on orders $49 and up
Triangulates the front of the rear carrier to the subframe.
Powerflex - Corporate Logo
T#:19164185
Part#: PFF5K-201
In Stock
$ 254.99 USD
Free Shipping on orders $49 and up

MINI R56 Front Control Arm - Rear Bushings With Brackets offers an upgraded solution for Mini Gen 2 models (R55-R59), providing enhanced durability and performance. Featuring pre-installed Powerflex polyurethane bushings within high-quality Chassis Technology Europe (CTE) brackets, this setup is ideal for owners seeking a straightforward installation without the hassle of pressing or pulling tools.

  • Designed for MINI R56 models, also compatible with R55-R59, for a precise fit
  • Pre-installed Powerflex bushings offer improved handling and longevity over stock rubber bushings
  • High-quality polyurethane construction withstands wear and maintains performance longer than traditional bushings
  • CTE-supplied brackets simplify installation by eliminating the need for additional pressing or pulling tools
  • Enhances steering response and stability, making it ideal for both daily driving and spirited performance
  • Reduces maintenance time and cost with a simple bolt-on solution
  • Provides a more stable and controlled ride experience, especially during cornering
Show More Show Less