Find Parts That Fit Your Vehicle

Home
Suspension
Bushings & Mounts

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

This category contains parts that fit the following chassis:

Sub-Categories

Sort By:

Rein Front Strut Mount - E53

2X Entries Into Our F80 M3 Sweepstakes

T#:402075

Part#: 31306779604

Back Ordered

$ 34.99

This product was last offered at the strikethrough price on
08-13-2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

A common source of front suspension noise

5-series Strut/Shock Mount Kit - E39 540i with Factory Sport Suspensi...

10X Entries Into Our F80 M3 Sweepstakes

T#:182514

Part#: TMS182514

Back Ordered

Sale - Save 4% $ 873.02

This product was last offered at the strikethrough price on
06-26-2026

$ 835.52 USD

Add to Wish List

Qty

Sale - Save 4%

$ 873.02

This product was last offered at the strikethrough price on
06-26-2026

$ 835.52 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. This package includes all of the original parts used in the E39 factory sport suspension. If you're overhauling your E39 suspension with the factory sport shocks and springs this is the mount package you need (see our other listings if you're using performance shocks such as Bilstein). Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

front bump stop

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 540i
with factory sport suspension

Show More Show Less

Differential Bushing - Priced Each

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:376612

Part#: 33171131903

Back Ordered

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

HD Upper Control Arm Bushing - E34 525i, 530i, 535i, 540i, M5 ...

T#:186993

Part#: 31122226528Z

Back Ordered

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Does the front end on your E34 shake under braking or even while cruising on the highway? Upgrade from the stock type bushing to this heavy duty M5 style bushing from Lemforder. Lemforder is an OEM supplier to BMW so you can be assured of a top quality product that will ensure smooth vibration free driving in your e34. Sold Individually.

This item fits the following BMWs:
1989-1995 E34 BMW 525i 530i 535i 540i M5

Show More Show Less

Front Control Arm Bushing Set

10X Entries Into Our F80 M3 Sweepstakes

T#:45005581

Part#: 31126757623

Special Order: No Guaranteed ETA

Sale - Save 10% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.45 USD

Add to Wish List

Qty

Sale - Save 10%

$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.45 USD

Add to Wish List

Includes brackets and hardware

Strut Mount - Priced Each

T#:14353725

Part#: 31306785962

Back Ordered

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Delphi Front Lower Control Arm Bushing / Hydrobearing - Priced Each ...

T#:27838507

Part#: 31126854729

Back Ordered

$ 52.99

This product was last offered at the strikethrough price on
05-08-2026

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

When control arm bushings start deteriorating, you may notice increased suspension noise and steering vibrations. This can make the vehicle unstable during cornering and challenging to handle in regular driving. Such issues can lead to premature tire wear due to misalignment and put extra strain on other suspension parts, reducing their lifespan. Installing new control arm bushings can significantly improve the vehicle's handling and prevent damage to other suspension components, promoting overall durability.

Show More Show Less

3-series Strut/Shock Mount Kit - E36 Convertibles

10X Entries Into Our F80 M3 Sweepstakes

T#:340163

Part#: E36ICMOUNTKIT

Back Ordered

Sale - Save 2% $ 357.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 350.77 USD

Add to Wish List

Sale - Save 2%

$ 357.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 350.77 USD

Add to Wish List

The E36 3 Series Strut/Shock Mount Kit includes two OEM front strut tower mounts with bearings, two front strut reinforcement plates , front strut tower paper gaskets, two rear shock tower reinforcement plates , ten M8 13mm head Nyloc nuts, a pair of rear shock tower mount gaskets and your choice of three different rear shock mounts.

You can choose from the HD OEM Rear Mounts , the " Repair Shop" Lifetime Warranty Mounts , or the High Performance Aluminum & Rubber Mounts . Any of these mounts are suitable for street use, we recommend the Performance Aluminum & Rubber Mounts for coil-over suspensions or for cars that see a lot of track use.

When you replace spring or shocks & struts in your car, these mounts must be removed and reinstalled anyway. Do it at the same time you replace shocks to save yourself the the increased labor time if they go bad soon after shock/strutinstall.

Choose your product options below.

This item fits the following BMWs:
1994-1998 E36 BMW 318ic 323ic 325ic 328ic M3 Convertible

Show More Show Less

Front Axle Mount Set

2X Entries Into Our F80 M3 Sweepstakes

T#:57616345

Part#: 31129058931

Back Ordered

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Over time, factory rubber control arm bushings degrade, crack, and soften due to exposure to road debris, oil, and endless suspension cycles.

3-series Strut/Shock Mount Kit - E46 (not M3, not xi)

10X Entries Into Our F80 M3 Sweepstakes

T#:338747

Part#: E46MOUNTKIT

Back Ordered

Sale - Save 5% $ 377.99

This product was last offered at the strikethrough price on
06-25-2026

Starting at $ 357.85 USD

Add to Wish List

Sale - Save 5%

$ 377.99

This product was last offered at the strikethrough price on
06-25-2026

Starting at $ 357.85 USD

Add to Wish List

This mount package contains all of the commonly replaced rubber mounts and pads for the front and rear shocks on a 1999-2005 E46 3-series (not for M3 or xi AWD). While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

Pick and choose from mounts below:

Front strut mounts (also known as the guide support)

Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)

Front and rear self-locking mounting nuts

Rear Lifetime Warranty 'Repair Shop' shock mounts

Rear shock mount reinforcements (to prevent cracking of shock towers)

Rear shock mount gaskets The spring pads, dust boots, and bump stops can be added from the menu below. Note that front bump stops and dust boots are generally not required if you're using Bilstein struts, Bilstein coil overs, H&R coil overs, or KW coil overs. Those struts come with their own front bump stops and boots and may include rear stops and boots as well.

We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

Show More Show Less

Front Strut Mount - Priced Each

T#:14419845

Part#: 31306852167

Back Ordered

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

5-series Strut/Shock Mount Kit - E39 525i/528i/530i with Performance ...

10X Entries Into Our F80 M3 Sweepstakes

T#:338707

Part#: TMS182510

Ships in 1 day

$ 491.99

This product was last offered at the strikethrough price on
08-07-2026

Starting at $ 457.82 USD

Add to Wish List

Starting at $ 457.82 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i
with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc

Show More Show Less

Strut Mounting Kit With Ball Bearing & Add-On Material

T#:56580194

Part#: 31304074653

Special Order: No Guaranteed ETA

$ 56.99 USD

Add to Wish List

Qty

$ 56.99 USD

Add to Wish List

Eliminate unwanted suspension slop and restore crisp, precise handling to your BMW with the Febi Front Strut Mount Kit.

1
…
16
17

Select Vehicle

Category

Bushings & Mounts

Brand

View All Brands

Price

Special Offers

Shipping

Purpose