Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

JT Design - Corporate Logo
T#:3666
Part#: JTD909
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Made in the USA These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
Front Upper Strut Mount - Priced Each
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Lemforder - Corporate Logo
T#:557118
Part#: 31306881929
In Stock
$ 122.99

This product was last offered at the strikethrough price on
03-11-2026

$ 87.69 USD
Free Shipping
$ 87.69 USD
Free Shipping
One often overlooked piece is the upper strut bearing and mount. This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber, and it can shorten the life of your shocks. To get the most out of your new suspension setup, it's recommended that you replace all parts that are known to fail. Not only will this make your new setup more effective, it will provide a better ride, proper tire position, and make all of your parts last longer.
Show More Show Less
OEM Lemforder Front Control Arm Bushing - Right Side - E46 M3 ...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Lemforder - Corporate Logo
T#:1607
Part#: 31122229624
In Stock
$ 98.99

This product was last offered at the strikethrough price on
03-19-2026

$ 82.99 USD
Free Shipping
$ 82.99 USD
Free Shipping

The front control arm bushings are a key piece of the suspension. They are constantly in motion and take abuse from impacts, potholes, rough roads, and general cornering/wheel motions. To give a quiet and smooth ride, the bushings are made of rubber with a metal sleeve insert. But the rubber can only withstand so much abuse before they become loose and spongy. This results in vibrations and possibly a shimmy when driving. A visual inspection will usually confirm that there is too much flex in the rubber or the rubber has cracked and torn. And if you're installing new control arms, always install new bushings to avoid duplicating labor costs.

This is a replacement stock RIGHT FRONT (Passenger's side) control arm bushing with the mounting bracket.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2001-2006 E46 BMW M3

Show More Show Less

OEM Lemforder 3-series Strut/Shock Mount Kit - E9X With Sport/Perform...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Lemforder - Corporate Logo
T#:11949
Part#: E9XSPORTMOUNTKIT
In Stock
$ 173.50

This product was last offered at the strikethrough price on
04-16-2026

$ 151.48 USD
Free Shipping
$ 151.48 USD
Free Shipping
New mounts should be installed whenever you are replacing the struts and shocks on your E90 and E92 3-series. The mounts keep the cabin isolated from annoying noises and impacts. Just like any other rubber mount, these will go bad over time, which allows more harshness and vibration to the chassis along with clunking noises. Replace them now to avoid doubling the labor charges down the road. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time!

This mount package is for 2006-2012 E90, E91, E92, and E93 3-series with the factory Sport, M Sport, or BMW Performance suspensions .

Included in the E9X Sport Mount Kit:
  • front upper strut mounts (also known as a guide support), 31306775098
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
  • rear lower shock mount (installs on spring arm), 33526768544
    Buy as a package and save $!!

    This item fits the following BMWs with factory Sport, M Sport, or BMW Performance suspension
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
  • Show More Show Less

    OEM Lemforder Front Control Arm Bushing - Left Side - E46 M3 ...
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:1727
    Part#: 31122229623
    In Stock
    $ 85.99

    This product was last offered at the strikethrough price on
    03-10-2026

    $ 83.99 USD
    Free Shipping
    $ 83.99 USD
    Free Shipping

    The front control arm bushings are a key piece of the suspension. They are constantly in motion and take abuse from impacts, potholes, rough roads, and general cornering/wheel motions. To give a quiet and smooth ride, the bushings are made of rubber with a metal sleeve insert. But the rubber can only withstand so much abuse before they become loose and spongy. This results in vibrations and possibly a shimmy when driving. A visual inspection will usually confirm that there is too much flex in the rubber or the rubber has cracked and torn. And if you're installing new control arms, always install new bushings to avoid duplicating labor costs.

    This is a replacement stock LEFT FRONT (Driver's side) control arm bushing with the mounting bracket.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMWs:
    2001-2006 E46 BMW M3

    Show More Show Less
    IRP - Individual Racing Parts - Corporate Logo
    T#:401369
    Part#: IRPRTM-P
    Ships on Aug 19, 2026
    $ 110.00 USD
    Free Shipping
    $ 110.00 USD
    Free Shipping

    Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension. 

    The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

    Fits the following BMW chassis:
    E36 BMW All Submodels except for 318ti
    E46 BMW All Submodels
    E30 BMW All Submodels
    E36 Z3 BMW All Submodels
    E85/E86 Z4 BMW All Submodels

    Show More Show Less

    OEM Lemforder Front Upper Strut Mount - E90 E92 - up to 03/2010 ...
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:393845
    Part#: 31336775097
    In Stock
    $ 76.99 USD
    Free Shipping
    $ 76.99 USD
    Free Shipping

    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less
    IRP - Individual Racing Parts - Corporate Logo
    T#:587022
    Part#: IRPRSM-90B
    Ships in 3 Business Days
    $ 195.00 USD
    Free Shipping
    $ 195.00 USD
    Free Shipping
    The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position
    Show More Show Less

    Condor Speed Shop - Corporate Logo
    T#:578349
    Part#: ADJRTAB
    Ships in 3 Business Days
    $ 209.99 USD
    Free Shipping
    $ 209.99 USD
    Free Shipping
    Designed specifically for those of you who prefer not to weld in toe and camber adjustment plates. If you have a lowered or track prepped BMW then you need this adjustable bushing kit. Condor's bushings feature in-car adjustability for camber and toe of up to +/- 1 degree. Their simple design allows for easy and accurate adjustment using the included stainless steel spanner wrench. Once adjusted, trailing arm bolts lock down the CNC machined center cores firmly in place. Condor's UHMW bushings and hard-coat anodized aluminum center cores will stiffen the rear trailing arms while giving you the benefit of adjustable suspension geometry.
    Show More Show Less

    Revshift - Corporate Logo
    T#:582007
    Part#: PSBE36GREEN
    Ships in 3 Business Days
    $ 159.99 USD
    Free Shipping
    $ 159.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
    For shocks with a standard 10mm pin diameter
    Revshift - Corporate Logo
    T#:1105924
    Part#: RSM-E6-10MM
    Ships on Aug 11, 2026
    $ 99.99 USD
    Free Shipping
    $ 99.99 USD
    Free Shipping
    Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 10mm threads.
    Show More Show Less
    Active Autowerke - Corporate Logo
    T#:397248
    Part#: 13-004
    Ships on Aug 25, 2026
    5% off MSRP $ 429.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 408.00 USD
    Free Shipping
    5% off MSRP
    $ 429.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 408.00 USD
    Free Shipping

    The main mounting bolt for the differential in the E36 is susceptible to shearing off during extreme driving conditions. This can cause internal damage to your diff, leaving you stranded at the track or on the side of the road. Active Autowerke's differential support bracket eliminates this issue forever in under an hour installation.

     

    Previously used Active Autowerke Part Number AA-DSB-E36

    This product fits the following BMWs:
    1992-1999 E36 323i 325i 328i M3

    Show More Show Less


    Revshift - Corporate Logo
    T#:582005
    Part#: PTABE6GREEN
    Ships in 1 Business Day
    $ 79.99 USD
    Free Shipping
    $ 79.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    OEM Lemforder Trailing Arm Bushing - 33321135808 - E34 M5, E32 ...
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:399343
    Part#: 33321135808
    Back Ordered
    $ 107.99 USD
    Free Shipping
    $ 107.99 USD
    Free Shipping

    Bushings tends to wear over time causing excessive movement, noise, and a sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Fits the following BMW's:
    E34 BMW M5
    E32 BMW 740i 740iL 750iL

    Show More Show Less
    Revshift - Corporate Logo
    T#:582006
    Part#: PTABE30GREEN
    In Stock
    $ 79.99 USD
    Free Shipping
    $ 79.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less

    Dinan - Corporate Logo
    T#:598376
    Part#: D280-0022
    Back Ordered
    11% off MSRP $ 479.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 425.99 USD
    Free Shipping
    11% off MSRP
    $ 479.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 425.99 USD
    Free Shipping
    An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness. Reduces brake shimmy. Nylon-lined bearings for quiet operation. Machined aluminum housings. Sealed bearings.
    Show More Show Less

    Revshift - Corporate Logo
    T#:582008
    Part#: PSBE36BLACK
    Ships in 2 Business Days
    $ 159.99 USD
    Free Shipping
    $ 159.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Revshift - Corporate Logo
    T#:1105909
    Part#: RBK-E3095A
    Ships in 5 Business Days
    $ 199.99 USD
    Free Shipping
    $ 199.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less

    OEM Lemforder Rear Subframe Bushing - E70 F15 E71 E72 F16
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:384625
    Part#: 33316784940
    In Stock
    $ 89.99 USD
    Free Shipping
    $ 89.99 USD
    Free Shipping

    Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less
    OEM Lemforder Rear Subframe Mounting, Front - 33312283382 - E9X E82 R...
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:398338
    Part#: 33312283382
    In Stock
    $ 68.99 USD
    Free Shipping
    $ 68.99 USD
    Free Shipping

    Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

    Upgrade for non-M vehicles!

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMW Chassis:
    2008 - 2013 E82 BMW 128i 135i 135is 1M Coupe
    2008 - 2013 E9X BMW M3
    2007 - 2013 E93 BMW 328i 335i
    2007 - 2013 E92 BMW 328i 335i
    2009 - 2011 E91 BMW 328i
    2006 - 2009 E91 BMW 328i
    2009 - 2012 E90 BMW 323i 328i 335d 335i
    2006 - 2008 E90 BMW 323i 325i 328i 330i 335i

    Show More Show Less

    OEM Lemforder Front Upper Control Arm Bushings - E60, E63
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:2725
    Part#: 31120305612
    In Stock
    $ 99.43

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 76.99 USD
    Limited Qty Sale
    Free Shipping
    $ 99.43

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 76.99 USD
    Limited Qty Sale
    Free Shipping

    This is a replacement Front Upper Control Arm Bushing also known as the "tension strut bushing" or "thrust arm bushing" for 2004-2010 BMW E60 5 series models (non Xi models). One required per arm. 

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    This item fits the following BMWs:
    2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5 - sorry not for Xi models
    2004+ E63 BMW 645ci 650i M6

    Show More Show Less

    Condor Speed Shop - Corporate Logo
    T#:577566
    Part#: RTAB36-OFFSET
    In Stock at Vendor
    $ 99.00 USD
    Free Shipping
    $ 99.00 USD
    Free Shipping
    Condor's Offset Rear Trailing Arm Bushings (RTABs) are perfect for the street and the track. They're designed to help correct rear toe-in and toe-out issues on lowered cars. To correct for toe-in: RTABs can be installed with the thick side inboard to help push the rear trailing arms towards the outsides of the car. To correct for toe-out when running minimal camber setup: RTABs can be installed with the thin sides inboard to help push the trailing arms inwards. The amount of total adjustment is purely dependent on how low your car is, but we've seen toe adjustment from 1/8” out on each side to 1/8” in on each side, which is a super nice range for the e36 rear end! They use UHMW in all of their suspension bushings because it is self-lubricating, meaning it requires no grease when installing, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. They include black oxide plated steel plates for each RTAB to prevent lateral movement between the bushing material and the aluminum. Polyurethane and rubber bushings will deflect and slide, causing your rear alignment settings to change mid-corner. With these bushings, you won't have to worry about dynamic changes in your toe settings; the rear alignment stays in check during hard cornering, braking, and acceleration. This item fits the following BMWs: 1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe Kit includes a pair of trailing arm bushings
    Show More Show Less
    Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
    For shocks with a larger 12mm pin diameter
    Revshift - Corporate Logo
    T#:1105925
    Part#: RSM-E6-12MM
    Ships in 2 Business Days
    $ 99.99 USD
    Free Shipping
    $ 99.99 USD
    Free Shipping
    Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 12mm threads.
    Show More Show Less
    Condor Speed Shop - Corporate Logo
    T#:583280
    Part#: S-CON-CAM-23
    Ships on Aug 13, 2026
    $ 184.99 USD
    Free Shipping
    $ 184.99 USD
    Free Shipping

    Swapping in E46 control arms into your E30 or E36 significantly increases negative camber by widening the track width and also gives you more clearance for more steering angle. Condor's CNC machined control arm brackets are made from solid steel and are fitted with a solid hex-shaped bushing. Designed for the street or the track, they hold the control arm steady and eliminate "shimmy" caused by stock bushings. They sharpen steering and improve overall driving feel. Comparable to the NLA Treehouse E36 & E30 Eyeball Arms.

    Easiest install of any aftermarket solution
    Allow clearance for E30 M50 Conversion exhaust
    Street Approved, marginal increase in NVH
    Easy Installation, no need for a press
    CNC machined steel construction
    Solid design without the maintenance of spherical bearings
    Heavy-Duty replaceable UHMW insert. Don't be misinformed, UHMW is the best material for these inserts. Delrin is not self-lubricating and will crack and degrade over time.
    Powder coated white for corrosion resistance
    Improve caster with M3 offset geometry
    Keep proper steering geometry under high loads
    Made in the U.S.A.
    Fitment:
    E30 84-91 3 Series
    E36 92-98 3 series & Z3

    Note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36

    Be sure to measure your control arms to determine if you need 21mm or 23mm. Meyle makes a standard e46 control arm and a Heavy Duty control arm. Most HD arms have a hex that is larger in size (23mm). Lifetime Warranty

    Show More Show Less


    OEM Lemforder Front Upper Ball Joint - E60 Xi
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:399299
    Part#: 31126779840
    In Stock at Vendor
    $ 98.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 95.99 USD
    Free Shipping
    $ 95.99 USD
    Free Shipping
    A BMW's suspension relies on the ball joints for freedom of movement as the control arms go through their range of motion. When a suspension 'wears out' it's usually the ball joints that need replacing along with rubber bushings. These are the front upper ball joints for the E60 AWD models - 525xi, 528xi, 530xi, and 535xi.

    This item fits the following BMWs:
    2004-2010  E60 5 Series  525xi 528xi 530xi 535xi & xDrive models
    Show More Show Less
    Revshift - Corporate Logo
    T#:1105899
    Part#: FBK-E36C95A
    Ships in 5 Business Days
    $ 379.99 USD
    Free Shipping
    $ 379.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Revshift - Corporate Logo
    T#:1105916
    Part#: PSB-E3095A
    Ships in 7 Business Days
    $ 89.99 USD
    Free Shipping
    $ 89.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less

    Condor Speed Shop - Corporate Logo
    T#:577958
    Part#: E34RSB
    Ships in 2 Business Days
    $ 109.99 USD
    Free Shipping
    $ 109.99 USD
    Free Shipping
    The subframe and differential mounting point is the heart of the rear suspension in an E34. When they move, so do all of the rear suspension mounting points. Replacing the stock rubber subframe and differential bushings with UHMW will limit drivetrain and suspension movement and keep your car’s suspension geometry the way it’s supposed to be. They will last longer than the original rubber and do not 'wind up' under load/unload, transferring more power through the axles to the wheels. Recommended for street or race use. Set of 2 subframe bushings.
    Show More Show Less

    OEM Lemforder Strut Mount With Bearing - 31306852167 - F25,F26 ...
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:399197
    Part#: 31306852167
    Ships on Dec 22, 2026
    $ 102.00 USD
    Free Shipping
    $ 102.00 USD
    Free Shipping

    This upper shock tower bearing/ strut mount is located at the top of the shock. We recommend inspecting or replacing these while replacing the front shocks. 

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMW Chassis:
    F25 X3,F26 X4

    Show More Show Less
    OEM Lemforder Front Upper Control Arm Bushing Set - E82, E89, E90, E9...
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:385277
    Part#: 31126763719LKT
    In Stock at Vendor
    $ 106.99

    This product was last offered at the strikethrough price on
    07-15-2026

    $ 78.99 USD
    Free Shipping
    $ 78.99 USD
    Free Shipping

    These are the stock replacement front upper control arm bushings. It is also known as the thrust arm bushing or pull rod bushing. This is a set of 2 bushings (31126763719 x 2).

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMWs:
    2008+ E82 BMW 128i 135i
    2006+ E90 BMW 325i 328i 330i 335d 335i - Sedan 
    2006+ E91 BMW 328i Wagon
    2007+ E92 BMW 328i 335i 335is - Coupe
    2007+ E93 BMW 328i 335i - Convertible
    2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Show More Show Less

    Revshift - Corporate Logo
    T#:1105922
    Part#: PSB-318TI95A
    Ships in 7 Business Days
    $ 89.99 USD
    Free Shipping
    $ 89.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    Revshift - Corporate Logo
    T#:1105932
    Part#: PSB-E3480A
    Ships in 1 Business Day
    $ 119.99 USD
    Free Shipping
    $ 119.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less

    Condor Speed Shop - Corporate Logo
    T#:583278
    Part#: CON-CAB-P
    Ships in 2 Business Days
    $ 195.99 USD
    Free Shipping
    $ 195.99 USD
    Free Shipping

    Swapping in E46 control arms into your E30 or E36 will significantly increase negative camber by widening the track width and will also give you more clearance for more steering angle. Condor's conversion bushings are machined from UHMW due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change). They've designed them offset to re-center the wheel and give your e30/e36 the correct caster. They will include a stainless-steel insert that tightly presses over the hex pattern on the E46 control arms. You do not need to grind down your control arms or make any other modifications to your chassis. Please note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36.

    Fitment:
    Fits the following Meyle and Lemforder arms with 21-22MM Hex.

    LEMFORDER ZHP - 31122282121 & 31122282122
    LEMFORDER - 31126777851 & 31126777852
    MEYLE HD - 31126777851 & 31126777852
    *Please note that Meyle makes a standard e46 control arm and a Heavy Duty control arm. SOME HD arms have a hex that is larger in size. These HD control arms may need to be shaved 1-2 mm for proper fitment.

    Show More Show Less

    OEM Lemforder Front Inner Ball Joint - Right - E46 325xi, 330xi ...
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:1736
    Part#: 31126756696
    In Stock at Vendor
    $ 145.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 131.99 USD
    Free Shipping
    $ 131.99 USD
    Free Shipping

    This is a replacement LEFT/DRIVER front inner ball joint, as found on all 2001 to 2005 BMW E46 325xi and 330xi. These are a common failure item, and we recommend replacing these in pairs (be sure to buy a right side as well). These should also be replaced when installing new control arms.

    Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    This item fits the following BMWs:
    2001-2005 E46 BMW 325xi 330xi

    Show More Show Less
    Revshift - Corporate Logo
    T#:1980634
    Part#: FBKOFFSET
    Ships in 7 Business Days
    $ 379.99 USD
    Free Shipping
    $ 379.99 USD
    Free Shipping
    Stiffen your suspension and improve your handling with these Revshift upgraded suspension bushings. Improves handing Will not wear out like oem bushings Properly dampens suspension components
    Revshift - Corporate Logo
    T#:1105926
    Part#: ASB-E9X
    Ships in 5 Business Days
    $ 299.99 USD
    Free Shipping
    $ 299.99 USD
    Free Shipping
    Revshift billet aluminum subframe bushings completely replace the oem rubber bushings on the BMW E82, E90, E91, E92, and E93 including the M3, 1M, and XI models. These bushings solid mount the rear subframe reducing wheel hop and improving the vehicles handling capabilities. The two piece bushing design sandwiches the subframe locking it in place. It will not shift on the bushings while driving like the one piece designs allow. They are CNC machined at Revshift in the USA from 6061-T6 billet aluminum.
    Show More Show Less


    Revshift - Corporate Logo
    T#:1105904
    Part#: PSB-E46M
    Ships in 7 Business Days
    $ 189.99 USD
    Free Shipping
    $ 189.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    OEM Lemforder Front Inner Ball Joint - Left - E46 325xi, 330xi ...
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:1732
    Part#: 31126756695
    In Stock at Vendor
    $ 147.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 115.99 USD
    Free Shipping
    $ 115.99 USD
    Free Shipping

    This is a replacement LEFT/DRIVER front inner ball joint, as found on all 2001 to 2005 BMW E46 325xi and 330xi. These are a common failure item, and we recommend replacing these in pairs (be sure to buy a right side as well). These should also be replaced when installing new control arms.

    Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    This item fits the following BMWs:
    2001-2005 E46 BMW 325xi 330xi

    Show More Show Less
    Lemforder Front Control Arm Bushings - Pair - E39, E52
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:592255
    Part#: 31129068753
    In Stock at Vendor
    $ 107.11

    This product was last offered at the strikethrough price on
    07-22-2026

    $ 98.18 USD
    Free Shipping
    $ 98.18 USD
    Free Shipping
    Fits in the front of the front axle support

    Dinan - Corporate Logo
    T#:396651
    Part#: D280-0017
    Ships in 5 Business Days
    11% off MSRP $ 598.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 531.99 USD
    Free Shipping
    11% off MSRP
    $ 598.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 531.99 USD
    Free Shipping
    For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.
    Show More Show Less

    OEM Lemforder Upper Front Control Arm Bushing Set - E83 X3
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:378185
    Part#: 31103412781
    In Stock at Vendor
    $ 125.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 111.99 USD
    Free Shipping
    $ 111.99 USD
    Free Shipping

    These are the stock replacement front upper control arm bushings. It is also known as the thrust arm bushing or pull rod bushing. Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less
    Revshift - Corporate Logo
    T#:1105914
    Part#: RBK-E3095A12MM
    Ships in 7 Business Days
    $ 224.99 USD
    Free Shipping
    $ 224.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less

    Revshift - Corporate Logo
    T#:1105917
    Part#: PSB-E3012MM95A
    Ships in 7 Business Days
    $ 119.99 USD
    Free Shipping
    $ 119.99 USD
    Free Shipping
    Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
    Show More Show Less
    14mm Front Differential Bushing Upgrade
    You will need to drill the diff casing & tap to M14x1.5
    Condor Speed Shop - Corporate Logo
    T#:597385
    Part#: 14MME36DIFFBU
    Ships in 2 Business Days
    $ 130.00 USD
    Free Shipping
    $ 130.00 USD
    Free Shipping
    These E36 & E36 M3 Differential Bushings from Condor Speed Shop are designed for the street and the track. You won't have to worry about any more rubbery flex in your diff mounts during hard acceleration. They use UHMW in all their suspension bushings because they are stiff, and have almost zero deflection while also absorbing vibration. It will outlast other types of rubber and polyurethane bushings.
    Show More Show Less

    OEM Lemforder Ball Joint - 33326770985 - E70 X5,E71 X6,F15,F16 ...
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Lemforder - Corporate Logo
    T#:398949
    Part#: 33326770985
    Ships in 5 Business Days
    $ 72.53

    This product was last offered at the strikethrough price on
    07-08-2026

    $ 71.94 USD
    Free Shipping
    $ 71.94 USD
    Free Shipping

    Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMW Chassis:
    E70 X5M,E71 X6M,E70 X5,E71 X6,F15,F16

    Show More Show Less

    Dinan - Corporate Logo
    T#:21045532
    Part#: D280-0030
    In Stock
    11% off MSRP $ 467.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 415.99 USD
    Free Shipping
    11% off MSRP
    $ 467.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 415.99 USD
    Free Shipping
    An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. They are also sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness Reduces brake shimmy Nylon-lined bearings for quiet operation Machined aluminum housings Sealed bearings Compatible with both RWD and xDrive models
    Show More Show Less
    IRP - Individual Racing Parts - Corporate Logo
    T#:2408498
    Part#: IRPRSB-9XMB2
    Special Order: No Guaranteed ETA
    $ 176.99 USD
    Free Shipping
    $ 176.99 USD
    Free Shipping
    Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.
    Show More Show Less
    IRP - Individual Racing Parts - Corporate Logo
    T#:401368
    Part#: IRPRTM-B
    Special Order: No Guaranteed ETA
    $ 185.99 USD
    Free Shipping
    $ 185.99 USD
    Free Shipping

    Want the best performance option in shock tower mounts? IRP has created their pillow-ball rear shock mounts for just this need. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in all conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars.

    The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

    Fits the following BMW chassis:
    E36 BMW All Submodels except for 318ti
    E46 BMW All Submodels
    E30 BMW All Submodels
    E36 Z3 BMW All Submodels
    E85/E86 Z4 BMW All Submodels

    Show More Show Less