Racing Seat Mounts

Planted Seat Bracket - Driver / Left - E36 Sedan

T#:19924423

Part#: SB108DR

Ships in 1 Business Day

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Planted Seat Bracket - Driver / Left - E92 Coupe

T#:19924421

Part#: SB120DR

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Planted Seat Bracket - Driver / Left - E90 E91 E93

T#:19924427

Part#: SB141DR

Ships in 4 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Planted Seat Bracket - Passenger / Right - E92 Coupe

T#:19924422

Part#: SB120PA

Ships in 3 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Planted Seat Bracket - Driver / Left - F3x

T#:19924410

Part#: SB223DR

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Planted Seat Bracket - Passenger / Right - E36 Sedan

T#:19924424

Part#: SB108PA

Ships in 1 Business Day

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

OMP Steel tall brackets - 36 holes | Black

T#:393735

Part#: HC/923

Ships on Oct 16, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 3 mm

Planted Seat Bracket - Passenger / Right - F3x

T#:19924409

Part#: SB223PA

Ships in 1 Business Day

$ 185.00 USD

Add to Wish List

Qty

$ 185.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

OMP Steel low brackets - 16 holes | Black

T#:393734

Part#: HC/922

Ships in 5 Business Days

$ 129.00 USD

Add to Wish List

Qty

$ 129.00 USD

Add to Wish List

Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm

OMP Alluminum tall brackets - 36 holes | Black

T#:393737

Part#: HC/925

Ships in 10 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 6 mm

OMP Seat Sliding bracket

T#:393727

Part#: HC/665

Ships on Sep 29, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Sliding rail kit to be mounted between the seat mount and the seat.

OMP Racing Seat Mounting Bracket - E36 Sedan

T#:393771

Part#: HC/108

Ships on Oct 1, 2026

$ 185.00 USD

Add to Wish List

Qty

$ 185.00 USD

Add to Wish List

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E36 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1992-1999 E36 BMW Sedan Models

Show More Show Less

OMP Steel low brackets | Black

T#:393730

Part#: HC/733E

Ships in 10 Business Days

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Steel brackets for side mounted seats. Low model. 350 mm length x 3 mm thick.

Planted Seat Bracket Black - Left R50-R59 Gen 2 MINI Cooper

T#:23383271

Part#: SB094DR

Ships in 2 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Planted Seat Bracket - Driver / Left - E8x

T#:19924412

Part#: SB139DR

Ships in 1 Business Day

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

OMP Racing Seat Mounting Bracket - E36 Coupes

T#:393770

Part#: HC/006

Special Order: No Guaranteed ETA

$ 185.00 USD

Add to Wish List

Qty

$ 185.00 USD

Add to Wish List

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E36 coupe. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1992-1999 E36 BMW Coupe Models

Show More Show Less

Planted Seat Bracket - Passenger / Right - E24

T#:19924450

Part#: SB091PA

Ships in 7 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Planted Seat Bracket - Passenger / Right - E60

T#:19924452

Part#: SB182PA

Ships in 7 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Planted Seat Bracket - Right/Passenger Side - F3X F8X

T#:19924414

Part#: SB223PA

Ships in 7 Business Days

$ 196.99 USD

Add to Wish List

Qty

$ 196.99 USD

Add to Wish List

Planted Seat Bracket - Driver / Left - F07 F10

T#:19924438

Part#: SB252DR

Ships in 7 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

High quality steel constructed seat bracket made right here in the USA! The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.

Show More Show Less

Part#: HC/924

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 16 different positions. Length: 400 mm Thickness: 6 mm

OMP Racing Seat Mounting Bracket - E46 Sedan

T#:393774

Part#: HC/121

Ships in 10 Business Days

$ 185.00 USD

Add to Wish List

Qty

$ 185.00 USD

Add to Wish List

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Sedan

Show More Show Less

OMP Racing Seat Mounting Bracket - Driver Side - E82 E88

T#:393765

Part#: HC139

Ships in 10 Business Days

$ 185.00 USD

Add to Wish List

Qty

$ 185.00 USD

Add to Wish List

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E82 and E88. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
2008-2011 E82/E88 BMW 1 Series

Show More Show Less

OMP Racing Seat Mounting Bracket - Passenger Side - E82/E88 1-Series ...

T#:637971

Part#: HC/139PA

Ships in 10 Business Days

$ 185.00 USD

Add to Wish List

Qty

$ 185.00 USD

Add to Wish List

This vehicle-specific OMP Racing Seat Mounting Bracket is designed to fit your vehicle's exact specifications, ensuring a perfect fit for your premium OMP racing seats. Utilize stock mounting positions and hardware for easy installation, minimizing the need for major drilling or welding. These mounts are engineered to be stronger and safer, mirroring the build style of OE mounts for added security and stability.

Show More Show Less