Find Parts That Fit Your Vehicle

Staggered Performance Wheel Sets

The term Staggered refers to running two pairs of wheels with differing widths on either end of the vehicle. For example, you may want to run an 8.5' wide wheel in the front while running a 10' wheel in the rear. This can be done to increase traction in the rear by increasing the contact patch, but will also provide a dramatic contrast when running deep dish wheels.

Sub-Categories

Sort By:

APEX Solid Gloss Black BMW Center Caps - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
Ships in 9 Business Days
$ 9.99 USD
Free Shipping
$ 9.99 USD
Free Shipping
18" APEX SM-10RE Staggered Wheel Set - Anthracite
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:40478166
Part#: 10RE181011ANKT
Ships in 5 Business Days
$ 2,956.00 USD
$ 2,956.00 USD
Apex SM-10RE ​18x10" ET25 & 18x11" ET44 Staggered Wheel Set The SM-10RE is the forged Enduro version of our popular SM-10 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Upgrade the appearance and reduce the weight of your BMW with Apex's SM-10RE wheels! Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Retaining the same ten-spoke layout seen on the Flow Formed SM-10 and ultra light Forged SM-10RS, the all-new Forged SM-10RE gets dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a fully redesigned and reinforced outer lip. All said and done, the SM-10RE is rated at an impressive 2100 lb max load, a five-hundred pound increase over the lightweight SM-10RS. These fortifying measures have been countered with a number of unique weight-saving features as well. Just like the Sprint Line Forged Wheels, the Enduro Line SM-10RE sports deep spoke scalloping intended to machine away excess material without decreasing strength or stiffness. Going a step further, the SM-10RE does away with the center cap support, the outer barrel remains unpainted, showcasing a beautiful raw aluminum, and outer lip pocketing is present between the spokes (an Apex first!). All together, these weight-saving features result in a wheel that is shockingly light considering its impressive stiffness and load rating. The SM-10RE is significantly stronger and stiffer compared to both its Sprint Line and Flow Formed counterparts, and even more so than most competitors. The intention is for the Enduro SM-10RE to become the new de facto wheel of choice for track day enthusiasts and racers looking for a ten-spoke wheel design. For racers, track day goers and car enthusiasts in general who won’t put up with overly light wheels that bend at the sight of steep curbing, the SM-10RE is the answer!
Show More Show Less
APEX Wheels - Corporate Logo
T#:40478132
Part#: ARC8RT199510
Ships in 5 Business Days
Starting at $ 3,296.00 USD
Starting at $ 3,296.00 USD
Apex ARC-8RT 19x9.5" ET22 & 19x10" ET25 Staggered Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.
Show More Show Less

19" APEX VS-5 Staggered Wheel Set - Choose Your Finish!
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:40546004
Part#: VS5191011
Ships in 5 Business Days
Starting at $ 2,196.00 USD
Starting at $ 2,196.00 USD
APEX VS-5 19x10" ET12 & 19x11" ET22 Staggered Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.
Show More Show Less

VS-5RS Forged Wheels - Staggered Set - Pick Your Finish
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:20320732
Part#: VS5RS1810T25
Ships in 5 Business Days
Starting at $ 3,036.00 USD
Free Shipping
Starting at $ 3,036.00 USD
Free Shipping
Shed weight and add style with APEX wheels! 18x10" ET25 18x11" ET44 APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence!
Show More Show Less
BBS - Corporate Logo
T#:26404862
Part#: CC2201BPOKT2
Ships in 2 Business Days
$ 3,484.99 USD
Free Shipping on orders $49 and up

BBS - Corporate Logo
T#:26404863
Part#: CC2201GRPKKT2
Ships in 2 Business Days
$ 3,742.99 USD
Free Shipping on orders $49 and up
BBS - Corporate Logo
T#:26271796
Part#: CC2201BPOKT1
Ships in 2 Business Days
$ 3,466.99 USD
Free Shipping on orders $49 and up

Vorsteiner - Corporate Logo
T#:400735
Part#: VFS001198510KT
Ships on Dec 22, 2026
$ 3,596.00 USD
$ 3,596.00 USD

Vorsteiner Sport Forged wheels are built to provide the ultimate in low weight, strength, and strikingly good looks! These wheels are made using the latest T-6061 aerospace grade aluminum blocks and individually machined to your exacting standards.

The new Vorsteiner V-FS 001 add an another great contender to the lineup of top of the line wheels brought to us by Vorsteiner. They feature a milled split spoke design with a cut-out channel in the middle. In the center are recessed bolt holes and center cap that add another layer of depth to the wheels. Between the split spokes are supports of aluminum that have 3 individual holes cut out, both to save weight and add style to these already aggressive looking wheels.

Vorsteiner have pre-built these wheel kits specifically to fit certain intended vehicles. This kit is for the F3X 3 Series and F25 X3's and features:

  • 19x8.5" ET30 front wheels
  • 19x10" ET45  rear wheels
  • 72.56mm Center Bore
  • 5x120 Bolt Pattern
  • Brushed Aluminum Finish

Fits the following BMW's:
2012+ F30/1/4 BMW 3 Series
2010+ F25 BMW X3

Show More Show Less

BBS - Corporate Logo
T#:26404929
Part#: LM411DBPKKT2
Ships on Nov 3, 2026
$ 6,779.00 USD
Free Shipping on orders $49 and up
Vorsteiner - Corporate Logo
T#:567532
Part#: VFF108F3XKT
Ships on Dec 22, 2026
$ 1,700.00 USD
$ 1,700.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

Show More Show Less
BBS - Corporate Logo
T#:26404864
Part#: CC2201PPOKT2
Ships on Nov 3, 2026
$ 3,484.99 USD
Free Shipping on orders $49 and up


BBS - Corporate Logo
T#:26471473
Part#: CC0202BPOKT1
Ships in 2 Business Days
$ 3,877.99 USD
Free Shipping on orders $49 and up
BBS - Corporate Logo
T#:4154554
Part#: LMRDSPK19SKT2
Ships in 2 Business Days
$ 7,759.00 USD
$ 7,759.00 USD
The BBS LM-R is a Multi-Piece Alloy wheel that will give your vehicle the look and performance you've been searching for. These stunning 7 spoke wheels will definitely transform your ride into something truly special! The design of these wheels will be the perfect complement to your BMW. Starting from a billet of 6,000 series aluminum, or a special magnesium alloy, every BBS forged wheel uses a special multi-stage Die-Forging process which can require up to 18 million pounds of pressure to produce. Every stage of production is optimized to help create the best-forged wheel in the industry. BBS forged wheels are not only light, they have been designed to optimize the stiffness to weight ratio while providing the safety and long-term durability expected from BBS. Features & Specifications: Front: 19x9.5" ET25 5x120 Rear: 19x10" ET20 5x120 PFS Ring Kit: 72.56mm 2-Piece Die Forged Aluminum Wheel Titanium Fasteners BBS Patented Milling inside of open spoke area Weight optimized by FEM analysis
Show More Show Less
BBS - Corporate Logo
T#:26238412
Part#: REV7045DSKT1
Ships in 2 Business Days
$ 5,489.00 USD
$ 5,489.00 USD

BBS - Corporate Logo
T#:5457392
Part#: LM283DSPKKT1
Ships on Nov 3, 2026
$ 8,139.00 USD
$ 8,139.00 USD
BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. BB LM are 2-Piece Die Forged Aluminum Wheel - Weight optimized by FEM analysis. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. Staggered set of BBS LM Wheels - Diamond Silver center with a diamond cut lip Front - 20x9 ET20 72.5 CB FPS Rings Rear - 20x10 ET33 72.5 CB FPS Rings
Show More Show Less

BBS - Corporate Logo
T#:26471474
Part#: CC0202GRPKKT1
Ships in 2 Business Days
$ 4,133.99 USD
$ 4,133.99 USD
BBS - Corporate Logo
T#:26404888
Part#: LM434DBPKKT1
In Stock at Vendor
$ 7,169.00 USD
Free Shipping on orders $49 and up

BBS - Corporate Logo
T#:26204992
Part#: CC2002GRPKKT
Ships in 2 Business Days
$ 3,666.99 USD
Free Shipping on orders $49 and up
APEX SM-10 19" Staggered Wheel Set - Anthracite
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:19230369
Part#: SM101885H95ANKT
Ships in 5 Business Days
$ 1,936.00 USD
Free Shipping
$ 1,936.00 USD
Free Shipping
APEX SM-10 19" Staggered Wheel Set -- 19x8.5" / 19x9.5" This set of 8.5" and 9.5" SM-10 wheels is an easy staggered fitment for the E46 M3 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use an 8.5" ET35 on the front and a 9.5" ET28 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10 lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

BBS - Corporate Logo
T#:26238410
Part#: REV7045BKKT1
Ships in 2 Business Days
$ 5,489.00 USD
$ 5,489.00 USD

BBS - Corporate Logo
T#:26238439
Part#: LM312DSPKKT1
Ships on Nov 3, 2026
$ 7,599.00 USD
$ 7,599.00 USD
BBS - Corporate Logo
T#:5484754
Part#: RIA008GLKT
Ships in 2 Business Days
$ 4,620.00 USD
Free Shipping
$ 4,620.00 USD
Free Shipping
BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One-Piece Die Forged Aluminum Wheel - BBS Patented Milling Process inside the spoke area - Weight optimized by FEM analysis. Staggered set of BBS RI-A Gold Front - 18x9.5 ET23 72.5 CB FPS Rings Rear - 18x10.5 ET37 72.5 CB FPS Rings
Show More Show Less
Vorsteiner - Corporate Logo
T#:400791
Part#: VFF107209105KT1
Ships on Dec 22, 2026
$ 2,400.00 USD
$ 2,400.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

The V-FF 107's feature a double y-spoke pattern, creating an alternating mesh design that is a modern take on the classic mesh often seen in the 70's and 80's motorsport wheels. This design allows the wheel to appear both aggressive and sporty, yet still attractively simple and elegant enough that these would easily accompany any high end sports car without looking out of place. These are perfect for bringing out the performance styling any vehicle.

Wheels Specs:

  • 20x9" ET30 (2)
  • 20x10.5" ET40 (2)
  • 72.56mm Center Bore
  • 5x120 Bolt Pattern
  • Carbon Graphite Finish

Fits the following BMW's:
2010-2016 F10 BMW 5 Series Non-M
2011+ F12/13 BMW 6 Series Non-M

Show More Show Less


BBS - Corporate Logo
T#:26071925
Part#: RIA028MGRKT2
Ships in 2 Business Days
$ 4,689.00 USD
$ 4,689.00 USD
Vorsteiner - Corporate Logo
T#:400737
Part#: VFS00120911KT
Ships on Dec 22, 2026
$ 3,996.00 USD
$ 3,996.00 USD

Vorsteiner Sport Forged wheels are built to provide the ultimate in low weight, strength, and strikingly good looks! These wheels are made using the latest T-6061 aerospace grade aluminum blocks and individually machined to your exacting standards.

The new Vorsteiner V-FS 001 add an another great contender to the lineup of top of the line wheels brought to us by Vorsteiner. They feature a milled split spoke design with a cut-out channel in the middle. In the center are recessed bolt holes and center cap that add another layer of depth to the wheels. Between the split spokes are supports of aluminum that have 3 individual holes cut out, both to save weight and add style to these already aggressive looking wheels.

Vorsteiner have pre-built these wheel kits specifically to fit certain intended vehicles. This kit is for the F10 Non-M 5 Series and features:

  • 20x9" ET30 front wheels
  • 20x11" ET46 rear wheels
  • 72.56mm Center Bore
  • 5x120 Bolt Pattern
  • Brushed Aluminum Finish

Fits the following BMW's:
2010-2016 F10 BMW Non-M 5 Series

Show More Show Less
BBS - Corporate Logo
T#:26271797
Part#: CC2201GRPKKT1
Ships in 2 Business Days
$ 3,723.99 USD
Free Shipping on orders $49 and up

BBS - Corporate Logo
T#:26271798
Part#: CC2201PPOKT1
Ships in 2 Business Days
$ 3,466.99 USD
Free Shipping on orders $49 and up

BBS - Corporate Logo
T#:26238411
Part#: REV7045DBKT1
Ships in 2 Business Days
$ 5,489.00 USD
$ 5,489.00 USD
BBS - Corporate Logo
T#:26471520
Part#: CI0102MBZKT1
Ships on Nov 3, 2026
$ 4,337.99 USD
Free Shipping on orders $49 and up

Vorsteiner - Corporate Logo
T#:400801
Part#: VFF107209105KT
Ships on Dec 22, 2026
$ 2,400.00 USD
$ 2,400.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

The V-FF 107's feature a double y-spoke pattern, creating an alternating mesh design that is a modern take on the classic mesh often seen in the 70's and 80's motorsport wheels. This design allows the wheel to appear both aggressive and sporty, yet still attractively simple and elegant enough that these would easily accompany any high end sports car without looking out of place. These are perfect for bringing out the performance styling any vehicle.

Wheels Specs:

  • 20x9" ET30 (2)
  • 20x10.5" ET40 (2)
  • 72.56mm Center Bore
  • 5x120 Bolt Pattern
  • Titanium Machine Finish

Fits the following BMW's:
2010-2016 F10 BMW 5 Series Non-M
2011+ F12/13 BMW 6 Series Non-M

Show More Show Less
Vorsteiner - Corporate Logo
T#:567596
Part#: VFF109F12M6KT
Ships on Dec 22, 2026
$ 2,900.00 USD
$ 2,900.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

Show More Show Less

BBS - Corporate Logo
T#:5484751
Part#: RIA008MGRKT
Ships in 2 Business Days
$ 4,620.00 USD
Free Shipping
$ 4,620.00 USD
Free Shipping
BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One-Piece Die Forged Aluminum Wheel - BBS Patented Milling Process inside the spoke area - Weight optimized by FEM analysis. Staggered set of BBS RI-A Matte Graphite Front - 18x9.5 ET23 72.5 CB FPS Rings Rear - 18x10.5 ET37 72.5 CB FPS Rings
Show More Show Less

Vorsteiner - Corporate Logo
T#:400789
Part#: VFF107229105KT
Ships on Dec 22, 2026
$ 2,900.00 USD
$ 2,900.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

The V-FF 107's feature a double y-spoke pattern, creating an alternating mesh design that is a modern take on the classic mesh often seen in the 70's and 80's motorsport wheels. This design allows the wheel to appear both aggressive and sporty, yet still attractively simple and elegant enough that these would easily accompany any high end sports car without looking out of place. These are perfect for bringing out the performance styling any vehicle.

Wheels Specs:

  • 22x9" ET28 (2)
  • 22x10.5" ET35 (2)
  • 66.56mm Center Bore
  • 5x112 Bolt Pattern
  • Titanium Machine Finish

Fits the following BMW's:
2016+ G11 BMW 7 Series

Show More Show Less
BBS - Corporate Logo
T#:26171602
Part#: RIA045BBKT1
Ships in 2 Business Days
$ 4,769.00 USD
$ 4,769.00 USD
BBS - Corporate Logo
T#:26238512
Part#: LM403GPKKT1
Ships in 2 Business Days
$ 6,949.00 USD
$ 6,949.00 USD


BBS - Corporate Logo
T#:5457389
Part#: LM283DBPKKT1
Ships in 2 Business Days
$ 8,139.00 USD
$ 8,139.00 USD
BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. BB LM are 2-Piece Die Forged Aluminum Wheel - Weight optimized by FEM analysis. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. Staggered set of BBS LM Wheels - Diamond Black center with a diamond cut lip Front - 20x9 ET20 72.5 CB FPS Rings Rear - 20x10 ET33 72.5 CB FPS Rings
Show More Show Less
Vorsteiner - Corporate Logo
T#:400794
Part#: VFF1071995105KT
Ships on Dec 22, 2026
$ 2,200.00 USD
$ 2,200.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

The V-FF 107's feature a double y-spoke pattern, creating an alternating mesh design that is a modern take on the classic mesh often seen in the 70's and 80's motorsport wheels. This design allows the wheel to appear both aggressive and sporty, yet still attractively simple and elegant enough that these would easily accompany any high end sports car without looking out of place. These are perfect for bringing out the performance styling any vehicle.

Wheels Specs:

  • 19x9.5" ET22 (2)
  • 19x10.5" ET34 (2)
  • 72.56mm Center Bore
  • 5x120 Bolt Pattern
  • Carbon Graphite Finish

Fits the following BMW's:
2015+ F8X BMW M3 & M4

Show More Show Less
BBS - Corporate Logo
T#:26404855
Part#: REV7057DBKT1
Ships in 2 Business Days
$ 5,719.00 USD
$ 5,719.00 USD

BBS - Corporate Logo
T#:5484764
Part#: LM317DSPKKT
Ships in 2 Business Days
$ 8,979.00 USD
$ 8,979.00 USD
BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. 2-Piece Die Forged Aluminum Wheel - Titanium Fasteners - BBS Patented Milling inside of open spoke area - Weight optimized by FEM analysis Staggered set of BBS LM-R Diamond Silver Center With Diamond Cut Lip Front - 20x9.5 ET23 72.5 CB FPS Rings Rear - 20x10.5 ET35 72.5 CB FPS Rings
Show More Show Less

Vorsteiner - Corporate Logo
T#:400798
Part#: VFF107198510KT
Ships on Dec 22, 2026
$ 2,200.00 USD
$ 2,200.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

The V-FF 107's feature a double y-spoke pattern, creating an alternating mesh design that is a modern take on the classic mesh often seen in the 70's and 80's motorsport wheels. This design allows the wheel to appear both aggressive and sporty, yet still attractively simple and elegant enough that these would easily accompany any high end sports car without looking out of place. These are perfect for bringing out the performance styling any vehicle.

Wheels Specs:

  • 19x8.5" ET30 (2)
  • 19x10" ET45 (2)
  • 72.56mm Center Bore
  • 5x120 Bolt Pattern
  • Carbon Graphite Finish

Fits the following BMW's:
2012+ F30/1/4 BMW 3 Series

Show More Show Less
Vorsteiner - Corporate Logo
T#:567491
Part#: VFF101E8XE9XKT
Ships on Dec 22, 2026
$ 2,200.00 USD
$ 2,200.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

Show More Show Less

Vorsteiner - Corporate Logo
T#:567599
Part#: VFF109G12KT1
Ships on Dec 22, 2026
$ 2,900.00 USD
$ 2,900.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

Show More Show Less
Vorsteiner - Corporate Logo
T#:400788
Part#: VFF107229105KT1
Ships on Dec 22, 2026
$ 2,900.00 USD
$ 2,900.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

The V-FF 107's feature a double y-spoke pattern, creating an alternating mesh design that is a modern take on the classic mesh often seen in the 70's and 80's motorsport wheels. This design allows the wheel to appear both aggressive and sporty, yet still attractively simple and elegant enough that these would easily accompany any high end sports car without looking out of place. These are perfect for bringing out the performance styling any vehicle.

Wheels Specs:

  • 22x9" ET28 (2)
  • 22x10.5" ET35 (2)
  • 66.56mm Center Bore
  • 5x112 Bolt Pattern
  • Carbon Graphite Finish

Fits the following BMW's:
2016+ G11 BMW 7 Series

Show More Show Less

Vorsteiner - Corporate Logo
T#:567533
Part#: VFF108F3XKT1
Ships on Dec 22, 2026
$ 2,200.00 USD
$ 2,200.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

Show More Show Less

BBS - Corporate Logo
T#:26171601
Part#: RIA007MGRKT2
Ships in 2 Business Days
$ 4,529.00 USD
$ 4,529.00 USD
BBS - Corporate Logo
T#:26471628
Part#: FI135DBKT1
Ships in 2 Business Days
$ 10,120.00 USD
Free Shipping on orders $49 and up
$ 10,120.00 USD
Free Shipping on orders $49 and up

Upgrade your BMW's performance and style with the elite BBS FI-R wheels, renowned for their lightweight construction and cutting-edge design. Crafted with aerospace-grade aluminum alloy using advanced forging techniques, these wheels are exceptionally strong yet incredibly lightweight, enhancing both aesthetics and performance. Featuring a sleek and aggressive multi-spoke pattern, the FI-R wheels strike a perfect balance of style and function. Highly sought-after among automotive enthusiasts and professional racers, the FI-R series delivers top-notch quality and precision engineering. Elevate your vehicle's appearance and handling to the highest level with BBS FI-R wheels.

  • Exceptionally strong yet lightweight construction
  • Sleek and aggressive multi-spoke design adds style
  • Crafted with aerospace-grade aluminum alloy for superior performance
  • Perfect balance of aesthetics and function

Specs:

  • Size: 20"x9.5" / 20"x10.5"
  • Offset: 22mm / 35mm
  • Center Bore: PFS - Includes Set of Four PFS to 72.5mm PFS Rings & Clips
  • Bolt Pattern: 5x120
  • Color: Diamond Black
Show More Show Less
BBS - Corporate Logo
T#:25838999
Part#: RIA008MGRKT1
Ships in 2 Business Days
$ 4,689.00 USD
$ 4,689.00 USD


Vorsteiner - Corporate Logo
T#:567550
Part#: VFF108F87M2KT
Ships on Dec 22, 2026
$ 2,200.00 USD
$ 2,200.00 USD

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

Show More Show Less
BBS - Corporate Logo
T#:26204991
Part#: CC2002BPOKT
Ships in 2 Business Days
$ 3,408.99 USD
Free Shipping on orders $49 and up