Packaged by Turner BMW Internal Engine Parts

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges. 

Includes

• Shim set 
• Installation tool #83300493743
• 16 Blade Feeler gauge set 

BMW recommends S54 valve inspection and adjustment every 30k miles.

*Click here for valve adjustment instructions*

The S65 engine has a known history of rod bearing failure. If your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing, a failure that has the potential to trash your crankshaft.

What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service!

Kit Includes:

Turner Motorsport "Race Series" WPC-Treated Rod Bearing Shells (16) Genuine BMW Connecting Rod Bolts (16) OEM MANN Oil Filter Kit Liquid Moly Leichtlauf High Tech Engine Oil - 5W-40 (9 Liters) Elring Oil Pan Gasket Permatex Ultra Slick Engine Assembly Lube (4 oz.)

Protect your S65 engine from potential rod bearing failure by choosing the BE Bearings and Clevite collaboration. These upgraded rod bearings offer increased clearance and a lead-copper material composition, safeguarding against catastrophic engine failure caused by spun bearings. The innovative Clevite Tri-Metal design, featuring Tri-Armor™ coating, ensures improved lubrication, wear prevention, and tolerance to foreign particles in the oil. The softer bearings are gentle on your engine and enable accurate oil testing to monitor engine wear.

This kit includes:

• Upper and lower BE Bearings upgraded rod bearings
• Hardware
• Oil filter
• Castrol TWS Edge Professional
• Oil pan gasket
• RedLine assembly lube

Enhance your S65 engine's durability and performance with this comprehensive kit from Turner Motorsport.

Ensure the peak performance of your BMW N55 or S55 engine with Turner Motorsport's Eccentric Shaft Replacement Kit. This all-inclusive kit features essential components, including:

• Camshaft
• Eccentric Shaft Bearing
• Valve Cover Gasket Set
• Gasket

Designed for precision and durability, this kit guarantees optimal engine performance and longevity. Rely on Turner Motorsport for top-quality replacement parts that adhere to the highest standards.

This kit includes every thing needed to replace your rod bearings.

Kit includes

Upper and lower WPC-treated rod bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

If you're the proud owner of an S54-equipped BMW, chances are you're passionate about enhancing your vehicle's performance and longevity. One crucial upgrade that can significantly improve your driving experience is Turner Motorsport's WPC Rod Bearing Replacement Kit, coupled with ARP Rod Bolts for increased durability.

Enhanced Durability: The WPC Performance Rod Bearing Replacement Kit is designed with superior materials and manufacturing processes. WPC treatment reinforces the surface of the bearings, making them highly resistant to wear, which is essential for high-revving engines like the S54. This durability ensures your engine will stand the test of time, even under strenuous driving conditions. Improved Performance: By reducing friction and wear, WPC-treated rod bearings allow for smoother and more efficient engine operation. This increases power and responsiveness, providing a more exhilarating driving experience. Whether tearing up the track or enjoying a spirited weekend drive, you'll notice a difference in your vehicle's performance. Precision Engineering: Crafted from premium quality materials, these bolts and bearings offer exceptional tensile strength and structural integrity. This guarantees that your connecting rods will stay securely in place, even during high-stress situations. Your engine's components will work in perfect harmony, minimizing the risk of catastrophic engine failure. Preventative Maintenance: The S54 is notorious for rod bearing failure, often necessitating complete short block replacement. Choosing to proactively replace your rod bearings with our WPC offering ensures smooth operation and eliminates potential engine failure. Included in the kit:

12 - Turner Motorsport "Race Series" WPC-Treated Bearing Shells 4 - Self-Locking Collar Nut - Priced Each 1 - Oil Pan Gasket - Elring 1 - Oil Pan Center Cover Gasket 1 - Oil Filter Kit 1 - Oil Drain Plug 1 - Dipstick O-ring 1 - ARP Connecting Rod Bolt Kit (M10x1.25 - for S54B32 produced after 02/2003) 6 - Castrol Edge Euro Car Engine Oil (10w-60) Quart 1 - Redline Assembly Lube - 4 oz

BMW recommends valve adjustment every 30,000 miles on the S54 engine.This valve adjustment kit includes every thing needed to to a proper valve adjustment on the S54 engine. 

Kit includes

• Wiseco valve shims
• Elring valve cover gasket set
• BMW Valve shim Installation tool
• Valve shim feeler gauge set 
• Castrol TWS Edge Professional Engine Oil - 6 Quarts
• Mann Oil Filter Kit
• Oil pan drain plug 

Please note the the included feeler gauge set allows you to stack feeler blades to get a more precise adjustment 

*Click here for valve adjustment instructions*

This item fits the following BMWs: 
2001-2006 E46 BMW M3, M3 Convertible 
2001-2002 Z3 BMW M Roadster M Coupe 
2006-2008 Z4 BMW Z4 M Roadster M Coupe 

The S62 engine has a known history of rod bearing failure. If your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing, a failure that has the potential to trash your crankshaft.

What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service!

Kit Includes:

Turner Motorsport "Race Series" WPC-Treated Rod Bearing Shells (16) Genuine BMW Connecting Rod Bolts (16) OEM Hengst Oil Filter Kit Castrol Edge Euro Car Engine Oil (10w-60) - 7 Quarts Turner Oil Change Decal Elring Oil Pan Gasket Permatex Ultra Slick Engine Assembly Lube (4 oz.)

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (8) Hardware for Oil Pan & Oil Sump Oil filter Liqui-Moly Molygen 5W-40 (6L) Drain Plug Turner Motorsport Oil Reminder Sticker Oil pan gasket RedLine assembly lube (4 oz.)