BMW Internal Engine Parts

BE Bearings - S65 Connecting Rod Bolt Set - BMW E9X M3

T#:403653

Part#: BE-CRB50-S65

In Stock

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

Designed by BE Bearings, manufactured by ARP. These custom made rod bolts are designed to be used on BMW factory connecting rods. BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion. Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.

Show More Show Less

BMW S65 BE Bearings Connecting Rod Bearing Upgrade Set

NOW SOLD AS SP1527F-STD-S65 (V2)

T#:403655

Part#: SP1527HKSTDS65

In Stock

$ 589.00 USD

Add to Wish List

Qty

$ 589.00 USD

Add to Wish List

BMW S65 BE Bearings Connecting Rod Bearing Upgrade Set is designed to address the known flaws in the factory BMW rod bearings, particularly for the S65B40 engine. Manufactured by Clevite to BE Bearing specifications, this set provides a crucial upgrade with its enhanced materials and design, ensuring improved performance and durability.

The original BMW bearings have minimal clearance, which leads to premature wear and potential engine failure. This upgrade replaces the tin-aluminum factory bearings with a superior silver-oxide-coated tri-metal "F" series design. The new bearings can handle 30% more load, offer better performance in low oil conditions, and are more forgiving of foreign particles in the oil. Designed specifically for BMW S65 engines, these bearings provide optimal performance for high-horsepower applications.

Designed specifically for BMW S65B40 engines
Silver-oxide coating withstands 30% more load capacity
Improved performance under low-oil and boundary conditions
Stronger backing material for enhanced durability
Corrects factory BMW rod bearing clearance issue
Ideal for high-horsepower applications and factory 10W60 weight oils
Complete set for 8 cylinders, ready for installation

Fits the following BMWs:

2008-2013 E9X BMW M3 (S65)

Show More Show Less

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

BE Bearings Connecting Rod Bearing Upgrade Set - BMW S85

Now ordered under BE Bearings "SP1527F-STD-S85"

T#:403658

Part#: SP1527HKSTDS85

In Stock

$ 734.00 USD

Add to Wish List

Qty

$ 734.00 USD

Add to Wish List

Designed and manufactured by Clevite to BE Bearing specifications.

These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure. Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil.

These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating.

Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended).
Designed with extra clearance to "fix" the BMW rod bearing design flaw.
Designed for use with factory 10W60 weight oils.
Tri-Armor coated for low conditions during cold start
Ideal for start-stop vehicles
Applicable for BMW engines S85B50
Standard Clearance
Sold as complete set (10-cylinders)

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

Show More Show Less

Schwaben VANOS Solenoid Socket - M52 M54 M62

T#:363378

Part#: 009333SCH01A

In Stock

Sale - Save 25% $ 38.99

This product was last offered at the strikethrough price on
05-02-2026

$ 29.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 38.99

This product was last offered at the strikethrough price on
05-02-2026

$ 29.24 USD

Add to Wish List

When servicing your vehicle's VANOS system, get the job done easier with this socket specifically designed for the removal of the VANOS solenoid.

Features:

85mm from end to end
1/2" drive
32mm with a depth of 70mm.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

BE Bearings Connecting Rod Bolt Upgrade Set - BMW S85B50

T#:403657

Part#: BE-CRB50-S85

In Stock

$ 369.00 USD

Add to Wish List

Qty

$ 369.00 USD

Add to Wish List

Designed by BE Bearings, manufactured by ARP. These custom made rod bolts are designed to be used on BMW factory connecting rods. BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion. Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.

Technical Details:

Composition: ARP2000®
Yield strength: 200,000 PSI
Tensile strength: 220,000 PSI
Torque specification: 50 Ft/Lbs, or 0.0065-0.0070 inch stretch

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

Show More Show Less

Crankshaft Socket - S54 / B46 / B48 / B58

T#:2181320

Part#: LCB226SCH

Ships on Sep 1, 2026

Sale - Save 25% $ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 44.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 44.99 USD

Add to Wish List

Enhance BMW engine maintenance with the Crankshaft Socket - B46 / B48 / B58, an essential tool for effortless engine rotation during timing jobs or valve timing adjustments.

Specifically designed for BMW B46, B48, and B58 engines
Facilitates easy and precise engine rotation
Ideal for timing jobs and valve timing adjustments
Ensures proper alignment and maintenance accuracy

Upgrade your BMW maintenance toolkit with the Crankshaft Socket, providing the necessary precision for timing tasks and valve adjustments on B46, B48, and B58 engines.

Show More Show Less

Glyco Connecting Rod Bearing Set

T#:375825

Part#: 11241284849

Ships in 1 Business Day

$ 92.02

This product was last offered at the strikethrough price on
07-15-2026

$ 84.36 USD

Add to Wish List

Qty

$ 84.36 USD

Add to Wish List

Standard bore - 45mm

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Rod Bearing - E30 M3, E28 M5, E24 M6, E34 M5 (sold individually) ...

T#:183

Part#: 11241310515

In Stock

$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD

Limited Qty Sale

Add to Wish List

E30 M3, E28 M5, E24 M6, E34 M5 Rod Bearing. Sold individually. Standard sizing.

This item fits the following BMWs
1988-1991 BMW E30 M3 - 8 required.
1988 BMW E28 M5 - 12 required.
1989-1993 BMW E34 M5 3.6 liter - 12 required.
1987-1989 BMW E24 M6 - 12 required.

Show More Show Less

Ferrea Performance Intake Valve - Stock Size

T#:583445

Part#: F1550P

Back Ordered

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

VANOS Solenoid Socket - B38, B48, & B58

T#:2453616

Part#: LCB225SCH

In Stock

Sale - Save 25% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.49 USD

Add to Wish List

VANOS central valve removal cannot be completed properly without this tool.

Glyco "Yellow" Crankshaft Bearing Shell - Set - E28, E30, E34, E36, E...

T#:375823

Part#: 11211706847

In Stock

$ 136.06

This product was last offered at the strikethrough price on
07-15-2026

$ 125.04 USD

Add to Wish List

Qty

$ 125.04 USD

Add to Wish List

Standard bore

BE Bearings Connecting Rod Bearing Upgrade Set - SP1534F - BMW S54 ...

T#:403644

Part#: SP1534HKSTDS54

Ships on Sep 15, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

NOTE: These bearings are now sold as SP1534F which features a new and improved silver oxide coating that is stronger and more durable! Designed and manufactured by Clevite to BE Bearing specifications. These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure. Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil. These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating. Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended). Designed with extra clearance to "fix" the BMW rod bearing design flaw. Designed for use with factory 10W60 weight oils. Tri-Armor coated for low conditions during cold start Ideal for start-stop vehicles Applicable for BMW engines S54 Standard size Sold as complete set (6-cylinders) Fits the following BMWs: 2002-2006 E46 BMW M3 S54 2002-2003 Z3 BMW M Coupe, M Roadster S54 2006-2008 Z4 BMW M Coupe, M Roadster S54

Show More Show Less

Ferrea Performance Exhaust Valve - Stock Size

T#:583444

Part#: F1552P

Ships on Sep 1, 2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Main Bearing Set - Standard Size - E30 M3 2.3 liter

T#:3166

Part#: 11210666110

Ships in 3 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

This E30 M3 Main bearing set is in standard size for the 2.3 liter S14 engine. This main bearing kit includes the thrust bearings.

This item fits the following BMWs:
1988-1991 E30 BMW M3

Show More Show Less

Genuine MINI Shaft Seal

T#:405713

Part#: 11117568264

In Stock

26% off MSRP $ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Qty

26% off MSRP

$ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Genuine MINI Crankshaft Sprocket

T#:32419

Part#: 11211485402

Ships in 2 Business Days

6% off MSRP $ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 71.99 USD

Add to Wish List

Qty

6% off MSRP

$ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 71.99 USD

Add to Wish List

Genuine MINI SPROCKET
Fits BMW Engines including:
W10,W11

Genuine MINI Hub

T#:406420

Part#: 11237537697

In Stock

$ 73.99 USD

Add to Wish List

Qty

$ 73.99 USD

Add to Wish List

Glyco Main Bearing Set (Standard) - E21, E28, E30

Features All Single-Tang Main Bearings for Earlier M20 Engines

T#:1196183

Part#: 11211722342

In Stock

$ 259.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD

Add to Wish List

Qty

$ 231.99 USD

Add to Wish List

Vargas "Spline Lock" Crank Hub Solution - N54

T#:558924

Part#: VTT-N54-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Glyco "Yellow" Crankshaft Bearing Shell - Set - E30, E36, E39, E46, E...

T#:375824

Part#: 11211706850

In Stock at Vendor

$ 126.61

This product was last offered at the strikethrough price on
07-15-2026

$ 118.92 USD

Add to Wish List

Qty

$ 118.92 USD

Add to Wish List

59.75MM(+0.25) bore

Spline Lock Crank Hub Solution

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

T#:18733527

Part#: VTT-CRANKHUB-2

Ships in 10 Business Days

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

T#:18733526

Part#: VTT-CRANKHUB-4

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Rod Bearing Set (+0.25)

T#:23748157

Part#: 112412848516CYL-

Ships in 1 Business Day

$ 331.13

This product was last offered at the strikethrough price on
07-15-2026

$ 305.57 USD

Add to Wish List

Qty

$ 305.57 USD

Add to Wish List

VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...

T#:19395579

Part#: VTTCRANKHUBPKG

Ships in 10 Business Days

$ 934.99 USD

Add to Wish List

Qty

$ 934.99 USD

Add to Wish List

VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture

Show More Show Less

Genuine MINI Exhaust Valve

T#:407264

Part#: 11347547187

Ships in 2 Business Days

8% off MSRP $ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Qty

8% off MSRP

$ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Glyco "Green" Crankshaft Bearing Shell - Set - E39, E46, E53, E83, Z3...

T#:374671

Part#: 11211706848

Ships in 1-2 days

$ 194.32 USD

Add to Wish List

Qty

$ 194.32 USD

Add to Wish List

Standard bore

Genuine MINI Impulse Sending Wheel

T#:515028

Part#: 11227634295

In Stock

7% off MSRP $ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD

Add to Wish List

Qty

7% off MSRP

$ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD

Add to Wish List

Genuine MINI Crankshaft Gear

T#:510222

Part#: 11217588996

In Stock

4% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.75 USD

Add to Wish List

Qty

4% off MSRP

$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.75 USD

Add to Wish List

Genuine MINI Camshaft Sprocket - SOHC

T#:33887

Part#: 11311485403

Ships in 2 Business Days

$ 128.99 USD

Add to Wish List

Qty

$ 128.99 USD

Add to Wish List

Genuine MINI SPROCKET
Fits BMW Engines including:
W10,W11

Genuine MINI Cylinder Head Bolts - Set Of 13

T#:405907

Part#: 11127560274

Ships in 2 Business Days

19% off MSRP $ 89.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.75 USD

Add to Wish List

Qty

19% off MSRP

$ 89.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.75 USD

Add to Wish List

Genuine MINI Hex Bolt With Washer

T#:29202

Part#: 07137829910

Ships in 2 Business Days

2% off MSRP $ 43.63

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.86 USD

Add to Wish List

Qty

2% off MSRP

$ 43.63

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.86 USD

Add to Wish List

Genuine MINI HEX BOLT WITH WASHER

Genuine MINI Shaft Seal

T#:405712

Part#: 11117568263

Ships in 2 Business Days

26% off MSRP $ 58.10

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.79 USD

Add to Wish List

Qty

26% off MSRP

$ 58.10

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.79 USD

Add to Wish List

Cylinder Head - N16

T#:15777325

Part#: 11122470427

Ships in 4 Business Days

6% off MSRP $ 4,526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,234.99 USD

Add to Wish List

Qty

6% off MSRP

$ 4,526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,234.99 USD

Add to Wish List

Introducing the Genuine Mini Cylinder Head (Part Number: 11122470427) for your Mini Cooper – the ultimate solution to enhance your engine's performance and reliability.

Precision-engineered to exacting standards, this cylinder head is an authentic replacement part from Genuine Mini, ensuring seamless compatibility and a perfect fit for your Mini Cooper. Crafted with the utmost attention to detail, it's designed to deliver exceptional combustion efficiency, improving power output and fuel economy.

Whether you're looking to replace a worn-out cylinder head or boost your Mini Cooper's performance, this Genuine Mini Cylinder Head is the ideal choice. Rest assured that you're investing in a top-quality component that meets the highest industry standards, backed by the reputation of Genuine Mini for excellence.

Upgrade your Mini Cooper's engine with the Genuine Mini Cylinder Head (Part Number: 11122470427) and experience the perfect balance of performance, durability, and reliability. It's time to unleash the full potential of your Mini Cooper with this authentic and high-quality component.

Show More Show Less

N54 Spline Lock Crank Hub Solution With Complete Package

T#:18733525

Part#: VTT-CRANKHUB-3

Ships in 5 Business Days

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Genuine MINI Piston W/ Rings - ( 0 Size ) Priced Each

T#:33527

Part#: 11257566019

Ships in 8 Business Days

10% off MSRP $ 414.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 370.99 USD

Add to Wish List

Qty

10% off MSRP

$ 414.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 370.99 USD

Add to Wish List

Genuine MINI MAHLE PISTON
Fits BMW Engines including:
N14

E36 325, 328 M3 Ferrea Spring Seat Set

T#:163

Part#: SL1021-24

Back Ordered

$ 118.80 USD

Add to Wish List

Qty

$ 118.80 USD

Add to Wish List

E36 325, 328 M3 Ferrea Spring Seat Set includes 24 seats. MUST be uses with the Ferrea valve springs. Recommended to be used with the Ferrea Competition Plus Big Valves and Ferrea Titanium Retainers. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

Show More Show Less

E36 325, 328 M3 Ferrea Titanium Retainer Set

T#:31

Part#: E11025-24

Back Ordered

$ 7,199.76 USD

Add to Wish List

Qty

$ 7,199.76 USD

Add to Wish List

E36 325, 328 M3 Ferrea Titanium Retainer Set - set of 24. Recommended to be used with the Ferrea Competition Plus Big Valves. MUST be used with the Ferrea high-performance valve spring and seat kit. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel, Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

Show More Show Less

E36 325, 328 & M3 Ferrea High Performance Valve Spring Set

T#:439

Part#: S10049-24

Back Ordered

$ 817.20 USD

Add to Wish List

Qty

$ 817.20 USD

Add to Wish List

Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicone steel These springs are manufactured with state-of-the-art equipment. Ferrea springs are heat-treated and stress-relieved, which dramatically increases the spring's life. Strict quality control procedures and cycle testing ensures consistency from batch to batch. Ferrea valve springs provide the stability needed for high lift, high rpm racing and street car engines. Kit includes a set of 24 springs. MUST be used with the Ferrea Spring Seat and Titanium Retainers. See links below.

https://www.turnermotorsport.com/e/p-163-e36-325-328-m3-ferrea-spring-seat-set/

https://www.turnermotorsport.com/e/p-31-e36-325-328-m3-ferrea-titanium-retainer-set/

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

Show More Show Less

Genuine Mini Hex Bolt With Washer R5X R6X - Priced Each

T#:405708

Part#: 11117540160

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Upgrade your Mini's engine with this high-quality Hex Bolt With Washer designed to attach the bottom engine crank housing to the top engine block. This essential component ensures a secure connection between engine parts, enhancing overall performance and reliability. Trust this genuine Mini part for optimal fit and function in your Mini vehicle.

Enhances engine performance
Ensures secure attachment between engine components
Genuine Mini part for optimal fit and reliability
Easy to install for quick replacement

Show More Show Less

Genuine MINI Hex Bolt With Washer - 07147543890

T#:29902

Part#: 07147543890

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Ensure the secure assembly of components in your Mini with the Genuine MINI Hex Bolt With Washer - 07147543890. This high-quality bolt and washer combination is designed specifically for Mini vehicles, providing reliability and peace of mind for various automotive applications.

Genuine OEM part ensures compatibility and fitment
High-quality construction for durability and longevity
Designed to meet Mini's specifications and standards
Ideal for various assembly and maintenance tasks in your Mini

Genuine MINI HEX BOLT WITH WASHER

Show More Show Less

RECTANGRING

T#:511589

Part#: 11317587757

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Connecting Rod Bolt - Priced Each

T#:512851

Part#: 11247593922

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Elevate your Mini's engine performance with the connecting rod bolt, essential for securing the connecting rod's bottom half to the rod itself. This vital component ensures the stability and integrity of the engine's operation, providing reliability and optimal functionality.