Find Parts That Fit Your Vehicle

BMW Internal Engine Parts

Rebuilding your engine or giving your cylinder head an overhaul? Internal engine components covers parts that are located within the engine block and cylinder head. Examples include: timing chains and tensioners, rocker arms, rod bolts and studs, head bolts, valve springs, connecting rods, and more. These are Genuine BMW engine parts, performance upgrades, or approved aftermarket brands that have a long track record of reliability and quality.

Sub-Categories

Sort By:

ECS - Corporate Logo
T#:396674
Part#: 017301ECS01
In Stock
Sale - Save 25% $ 67.99

This product was last offered at the strikethrough price on
06-13-2026

$ 50.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 67.99

This product was last offered at the strikethrough price on
06-13-2026

$ 50.99 USD
Free Shipping on orders $49 and up

If you're not sure if your Vanos seals are bad then the only question you need to answer is if you've replaced them. Every unit from the factory came with the same failure prone o-rings and seals, even the re-manufactured units you can still get today. The only real fix is by replacing the seals and o-rings with material that is built to last in the oiled, extreme temperature environment found in these kits. 

A premium product replacement with easy to follow instructions makes rebuilding your Vanos unit a must. Even thought the power loss is barely felt it's the opposite result once you replace the seals, every car that gets rebuilt ends up wowing the customer and all of them saying they didn't realize what they lost. 

There are a number of symptoms that will plague your car as a result of these failing seals such as erratic idle, engine hesitation, stalling, and increased fuel consumption to name a few. If you've been chasing down any of these symptoms with no fix then this could be your issue.

Show More Show Less
Victor Reinz - Corporate Logo
T#:1551
Part#: 11121721938
In Stock
Sale - Save 66% $ 62.21

This product was last offered at the strikethrough price on
05-14-2026

$ 20.94 USD
Free Shipping on orders $49 and up
Sale - Save 66%
$ 62.21

This product was last offered at the strikethrough price on
05-14-2026

$ 20.94 USD
Free Shipping on orders $49 and up
Head Bolt Set for all M50 engines with a steel engine block.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.​

This item fits the following BMWs:
992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1998-2000 Z3 BMW M Roadster M Roadster
Show More Show Less
Victor Reinz - Corporate Logo
T#:25748
Part#: 11127831862
In Stock at Vendor
$ 51.98 USD
Free Shipping on orders $49 and up
Head Bolt Set for the S54 engine.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

Sneed4Speed - Corporate Logo
T#:7260311
Part#: 1828344
Ships in 1 Business Day
$ 425.00 USD
Free Shipping on orders $49 and up
Sneed4Speed Street Series Cast Piston Set – N18 "STD" will be printed on the pistons. Please inspect before install. Built for MINI Cooper S (2011–2016) and JCW (2013–2016), this complete piston set is a direct-fit upgrade for your turbocharged N18 engine. Each kit includes pistons, wrist pins, and a full ring set pre-installed for easy assembly. Every piston comes with a 3-ring configuration: a top and second compression ring plus a multi-piece oil control ring (two thin rails with a wavy expander in between). The rings arrive already installed on the pistons, saving you setup time and ensuring proper fitment. Engineered from high-quality cast aluminum, these pistons are designed to safely handle 18–20 PSI of boost on a tuned setup—perfect for street-driven builds looking for reliable performance without stepping up to forged internals.
Show More Show Less

Victor Reinz - Corporate Logo
T#:1560
Part#: 11121740065
Ships in 1 Business Day
$ 80.99

This product was last offered at the strikethrough price on
05-07-2026

$ 78.74 USD
Free Shipping on orders $49 and up
$ 78.74 USD
Free Shipping on orders $49 and up
Head Bolt set for M52TU and M54 engines with aluminum block.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
Show More Show Less
Sneed4Speed - Corporate Logo
T#:30397432
Part#: R56MSK
Ships in 2 Business Days
$ 159.99 USD
Free Shipping on orders $49 and up

Schrick - Corporate Logo
T#:637691
Part#: SCHCSSS55238/272
Back Ordered
$ 1,899.99 USD
Free Shipping on orders $49 and up
High-performance camshafts are key to increasing the top-end power output of your S55 engine at high boost. 238/272 degree, 10.6mm/10.5mm lift. Perfectly compatible with OE valves, springs, VANOS, Valvetronic etc
Show More Show Less
Sneed4Speed - Corporate Logo
T#:18965470
Part#: NSHBS
Ships in 7 Business Days
$ 74.99 USD
Free Shipping on orders $49 and up

MINI R55+ Sneed4Speed N Series Engine Cylinder Head Bolts Kit

Upgrade your MINI's engine with the MINI R55+ Sneed4Speed N Series Engine Cylinder Head Bolts Kit. Engineered for performance and durability, this kit includes high-quality cylinder head bolts designed specifically for N series engines. Ensure a secure and reliable seal for your cylinder head with this premium bolt kit from Sneed4Speed.

  • Specifically designed for MINI R55+ models
  • High-quality bolts ensure secure cylinder head seal
  • Engineered for performance and durability
  • Provides peace of mind for engine reliability
  • Easy installation for hassle-free upgrade
Show More Show Less

Sneed4Speed - Corporate Logo
T#:26238455
Part#: R53S4SROD
Ships in 3 Business Days
$ 449.99 USD
Free Shipping on orders $49 and up

Upgrade your Mini's engine with Sneed4Speed Forged H Beam Connecting Rods, designed for the R53 and R52 Supercharged engines, also compatible with the R50/R52 Base Engines. Crafted from 4340 forged steel, these rods are rated to handle up to 700 horsepower, making them ideal for high-power builds. Perfect for budget-conscious builders seeking reliable performance, these rods offer a direct fit and replacement solution. Backed by a 100-year warranty, they provide peace of mind and long-lasting durability. Each rod includes 180,000 psi rated chrome moly rod bolts, capable of supporting up to 1000 HP.

  • Designed for R53 and R52 Supercharged engines, compatible with R50/R52 Base Engines
  • Constructed from 4340 forged steel for strength and durability
  • Rated to handle up to 700 horsepower for high-power builds
  • Ideal for budget-conscious builders seeking reliable performance
  • Direct fit and replacement for easy installation
  • Backed by a 100-year warranty for long-lasting peace of mind
  • Includes 180,000 psi rated chrome moly rod bolts for added strength and support
Show More Show Less

Sneed4Speed - Corporate Logo
T#:7260305
Part#: 182834325
Special Order: No Guaranteed ETA
$ 425.00 USD
Free Shipping on orders $49 and up
"0.25" will be printed on the pistons. Please inspect before install.
Sneed4Speed - Corporate Logo
T#:26238483
Part#: N12PS.5
Ships in 9 Business Days
$ 425.00 USD
Free Shipping on orders $49 and up
"0.50" will be printed on the pistons. Please inspect before install.

Enhance your Mini's engine performance with the R56 N12 Sneed4Speed Street Series Piston (+0.50). This piston set includes a complete ring set, providing everything needed for installation. Each piston features three rings: a top compression ring, a second compression ring, and an oil control ring. The oil control ring is composed of three individual rings, including two thin rings and one wavy metal ring, all installed into a single ring groove on the piston. The pistons come pre-installed with the rings, ensuring a hassle-free installation process.

  • Street Series Piston designed for R56 N12 engines
  • Includes a complete ring set for convenience
  • Three rings per piston: top compression ring, second compression ring, and oil control ring
  • Oil control ring consists of two thin rings and one wavy metal ring
  • Pistons come pre-installed with rings for easy installation
Show More Show Less


Sneed4Speed - Corporate Logo
T#:7260306
Part#: 182834350
Ships on Sep 1, 2026
$ 425.00 USD
Free Shipping on orders $49 and up
"0.50" will be printed on the pistons. Please inspect before install.
Sneed4Speed - Corporate Logo
T#:7260314
Part#: 182834450
In Stock at Vendor
$ 425.00 USD
Free Shipping on orders $49 and up
"0.50" will be printed on the pistons. Please inspect before install.

MINI R56 N18 Street Series Piston Set Of 4 - Plus Size 77.50mm (+0.50) is a high-performance upgrade designed to enhance engine performance and reliability. This set includes four pistons with a complete ring set pre-installed.

  • Enhanced Performance: Designed to increase engine displacement with a plus size of 77.50mm (+0.50), improving overall power and efficiency.
  • Complete Ring Set: Each piston comes with three rings: a top compression ring, a second compression ring, and an oil control ring. The oil control ring is made up of three individual rings (two thin rings and one wavy metal ring) all installed in a single groove.
  • Pre-installed Rings: Pistons come with the rings already installed, reducing installation time and complexity.
  • Durable Construction: Crafted as cast pistons for reliable performance under street conditions.
Show More Show Less

Victor Reinz - Corporate Logo
T#:583709
Part#: 11127560274
Ships on Sep 1, 2026
$ 85.99

This product was last offered at the strikethrough price on
08-13-2026

$ 73.99 USD
Free Shipping on orders $49 and up
$ 73.99 USD
Free Shipping on orders $49 and up

Victor Reinz - Corporate Logo
T#:13957889
Part#: 11121734214
In Stock at Vendor
$ 126.09 USD
Free Shipping on orders $49 and up
$ 126.09 USD
Free Shipping on orders $49 and up
Victor Reinz - Corporate Logo
T#:27672116
Part#: 11127582454
Ships in 2 Business Days
$ 55.99

This product was last offered at the strikethrough price on
05-07-2026

$ 54.99 USD
Free Shipping on orders $49 and up
$ 54.99 USD
Free Shipping on orders $49 and up
One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.

Victor Reinz - Corporate Logo
T#:591738
Part#: 11340033950
Ships in 1 Business Day
$ 39.99 USD
Free Shipping on orders $49 and up

MINI N14 N18 Valve Stem Seal Kit - Set Of 16 is an essential upgrade for maintaining the performance and longevity of your Mini's engine. This comprehensive kit, designed specifically for the MINI N14 and N18 engines, includes 16 high-quality valve stem seals that ensure optimal sealing and efficient engine performance.

  • Complete set of 16 valve stem seals for comprehensive coverage.
  • Designed specifically for MINI N14 and N18 engines for perfect compatibility.
  • High-quality materials for long-lasting durability and reliable performance.
  • Prevents oil leakage and reduces engine wear.
  • Enhances engine efficiency and extends engine life.

Ensure your Mini's engine operates at peak performance with the MINI N14 N18 Valve Stem Seal Kit - Set Of 16.

Show More Show Less
Victor Reinz - Corporate Logo
T#:373825
Part#: 11127574303
In Stock at Vendor
$ 152.99

This product was last offered at the strikethrough price on
04-15-2026

$ 147.99 USD
Free Shipping on orders $49 and up
$ 147.99 USD
Free Shipping on orders $49 and up
Head Bolt set for the N54 engines with aluminum block. 

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time. 
Show More Show Less


Victor Reinz - Corporate Logo
T#:19403
Part#: 11121721939
Ships in 1-2 days
$ 54.58 USD
Free Shipping on orders $49 and up
Replacing a head gasket? The M42 /M44 engine cylinder head bolts stretch when installed and as a result cannot be re-used. Replace you head bolts with this set of 10 head bolts.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.​

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic
1997-1998 Z3 BMW Z3 1.9
Show More Show Less
Schrick - Corporate Logo
T#:26904914
Part#: SCH-N52-238/272
Special Order: No Guaranteed ETA
$ 1,749.99 USD
Free Shipping on orders $49 and up
Schrick - Corporate Logo
T#:589847
Part#: S85-296-284KT
Ships on Dec 3, 2026
$ 2,113.99 USD
Free Shipping on orders $49 and up
This is one full set of Schrick camshafts, 4 cams total, for the S85 V10 M5 engine. These cams are the 296/284 degree version and include two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V10 motor.
Show More Show Less


Victor Reinz - Corporate Logo
T#:597166
Part#: 12111252257
Ships in 1 Business Day
$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2.99 USD
Free Shipping on orders $49 and up
$ 2.99 USD
Free Shipping on orders $49 and up
Seals the cover plate to the cylinder head
ECS - Corporate Logo
T#:14651263
Part#: 11127550913WKT
In Stock
$ 1,815.99 USD
Free Shipping on orders $49 and up
A common issue on N54 motors is cam bearing ledges scoring due to lack of lubrication, and if left unattended can cause damage to the camshafts and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.
Show More Show Less
ECS - Corporate Logo
T#:585808
Part#: 11217849238WPCKT
In Stock
Sale - Save 29% $ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.08 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.08 USD
Free Shipping on orders $49 and up

Victor Reinz - Corporate Logo
T#:593898
Part#: 11331264519
Ships in 1-2 days
$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2.99 USD
Free Shipping on orders $49 and up
$ 2.99 USD
Free Shipping on orders $49 and up
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

ECS - Corporate Logo
T#:585807
Part#: 11217849234WPC
In Stock
Sale - Save 35% $ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.63 USD
Free Shipping on orders $49 and up
Sale - Save 35%
$ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.63 USD
Free Shipping on orders $49 and up
Sneed4Speed - Corporate Logo
T#:7260304
Part#: 1828343
Ships in 5 Business Days
$ 425.00 USD
Free Shipping on orders $49 and up
"STD" will be printed on the pistons. Please inspect before install.

Sneed4Speed - Corporate Logo
T#:7260310
Part#: 182834425
Ships in 2 Business Days
$ 425.00 USD
Free Shipping on orders $49 and up
"0.25" will be printed on the pistons. Please inspect before install.

Sneed4Speed - Corporate Logo
T#:42099869
Part#: 56HSK
Ships in 2 Business Days
$ 199.99 USD
Free Shipping on orders $49 and up

Sneed4Speed - Corporate Logo
T#:26538327
Part#: BSRBS
Ships in 2 Business Days
$ 39.99 USD
Free Shipping on orders $49 and up


Sneed4Speed - Corporate Logo
T#:26238482
Part#: 182834324
Ships in 1 Business Day
$ 425.00 USD
Free Shipping on orders $49 and up
"0.25" will be printed on the pistons. Please inspect before install.

Upgrade your non-turbo MINI engine with the Sneed4Speed street series N12 cast piston set. This set includes pistons, rings, and wrist pins for comprehensive engine enhancement. Ensure proper fitment by checking engine models and compatibility before purchase. Each piston in the set features three rings: a top compression ring, a second compression ring, and an oil control ring, providing efficient performance and control. The oil control ring consists of two thin rings and a wavy metal ring, all pre-installed on the piston for convenience.

  • Complete piston set with rings and wrist pins included
  • Rings pre-installed on each piston for easy assembly
  • Designed for non-turbo MINI engines
  • Enhances engine performance and durability
Show More Show Less
Sneed4Speed - Corporate Logo
T#:23449741
Part#: NSMBS
Ships in 7 Business Days
$ 129.99 USD
Free Shipping on orders $49 and up

MINI R56 owners can enhance their engine performance with the Sneed4Speed Engine Main Bearing Set. This high-quality set is meticulously crafted to improve durability and reliability, offering superior support to the engine's rotating assembly. Designed for precise fitment and long-lasting performance, these main bearings ensure consistent lubrication and reduce friction within the engine. Perfectly engineered to meet high-performance demands, this bearing set is a crucial upgrade for keeping the MINI R56 engine running smoothly and efficiently.

  • Enhances Engine Durability and Reliability: Improves the overall strength and dependability of the engine.
  • Optimal Support to the Rotating Assembly: Provides necessary support to maintain engine balance and performance.
  • Precise Fitment and Longevity: Ensures a perfect fit and long-lasting use.
  • Minimizes Friction and Enables Consistent Lubrication: Reduces wear and tear by ensuring smooth lubrication.
  • Engineered for High-Performance Demands: Designed to handle the stress of high-performance driving.
Show More Show Less

Sneed4Speed - Corporate Logo
T#:23383346
Part#: N12PSSTD
In Stock
$ 425.00 USD
Free Shipping on orders $49 and up
"STD" will be printed on the pistons. Please inspect before install.

Enhance your MINI's performance with these pistons equipped with a complete ring set, comprising top compression, second compression, and oil control rings. The unique oil control ring consists of three individual rings configured into a single ring groove on the piston. This setup includes two thin rings and a wavy metal ring nestled between them. The pistons come ready with the rings pre-installed, ensuring convenience in installation.

Benefits:

  • Complete Ring Set: Includes top compression, second compression, and oil control rings
  • Pre-Installed Rings: Rings are already assembled on the pistons for ease of use
Show More Show Less

Sneed4Speed - Corporate Logo
T#:26538326
Part#: BSMBS
Ships in 1 Business Day
$ 94.99 USD
Free Shipping on orders $49 and up
Sneed4Speed - Corporate Logo
T#:19230372
Part#: R53FPS-.5
Ships in 1 Business Day
$ 699.00 USD
Free Shipping on orders $49 and up
"0.50" will be printed on the pistons. Please inspect before install.

MINI R53 R52 W11 Sneed4Speed Forged Street Series Piston Set

A high-performance piston upgrade designed to optimize the engine performance of your Mini R53 or R52 with the W11 engine. Engineered by Sneed4Speed, these forged pistons offer superior strength and durability compared to stock pistons, allowing for higher compression ratios and increased power output. With precision machining and tight tolerances, these pistons ensure optimal fitment and reliable performance under high-stress conditions. Upgrade your Mini's engine with the MINI R53 R52 W11 Sneed4Speed Forged Street Series Piston Set for improved performance and reliability.

  • High-performance upgrade for Mini R53 or R52 with W11 engine
  • Forged construction for superior strength and durability
  • Allows for higher compression ratios and increased power output
  • Precision machining for optimal fitment
  • Reliable performance under high-stress conditions
Show More Show Less

ECS - Corporate Logo
T#:13299333
Part#: 11248053291WP2KT
Ships in 1-2 days
Sale - Save 3% $ 923.99

This product was last offered at the strikethrough price on
06-14-2026

$ 896.16 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 923.99

This product was last offered at the strikethrough price on
06-14-2026

$ 896.16 USD
Free Shipping on orders $49 and up
ECS - Corporate Logo
T#:13299336
Part#: 11247620969WP2KT
Ships on Sep 10, 2026
Sale - Save 10% $ 839.99

This product was last offered at the strikethrough price on
06-14-2026

$ 755.89 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 839.99

This product was last offered at the strikethrough price on
06-14-2026

$ 755.89 USD
Free Shipping on orders $49 and up

ECS - Corporate Logo
T#:5484815
Part#: 11248053291WPCKT
Ships in 1-2 days
Sale - Save 3% $ 923.99

This product was last offered at the strikethrough price on
06-14-2026

$ 896.16 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 923.99

This product was last offered at the strikethrough price on
06-14-2026

$ 896.16 USD
Free Shipping on orders $49 and up
What's better than using Original BMW connecting rod bearings in your next engine build? WPC-treated OEM bearings! What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service!
Show More Show Less

Victor Reinz - Corporate Logo
T#:369725
Part#: 12141748398
Ships in 4 Business Days
$ 2.99 USD
Free Shipping on orders $49 and up
$ 2.99 USD
Free Shipping on orders $49 and up
Always replace the o-ring when replacing sensor
Victor Reinz - Corporate Logo
T#:282
Part#: 11349059171
Ships on Sep 1, 2026
$ 15.99 USD
Free Shipping on orders $49 and up
E30 M3 Valve Seal Set (package of 8). If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.
Show More Show Less
BMW M30 6 Cyl. 282-Degree - Monotronik- Camshaft
For Vehicles Equipped With Bosch Monotronik Only
Schrick - Corporate Logo
T#:26638228
Part#: 002201820-01
Special Order: No Guaranteed ETA
$ 1,567.99 USD
Free Shipping on orders $49 and up
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M30 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 282 Duration Intake @ 1mm - Duration Exhaust - 282 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 8, 4 Cam Lobe Lift Exhaust - 8, 4 Valve Lift w/o Valve Clearance Intake - 10, 6 Valve Lift w/o Valve Clearance Exhaust - 10, 6 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25
Show More Show Less


Schrick - Corporate Logo
T#:26638221
Part#: 005601720-00
Special Order: No Guaranteed ETA
$ 1,274.99 USD
Free Shipping on orders $49 and up
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 272 Duration Intake @ 1mm - Duration Exhaust - 272 Duration Exhaust @ 1mm - Intake Peak Timing - 111 Exhaust Peak Timing - 111 Cam Lobe Lift Intake - 7 Cam Lobe Lift Exhaust - 7 Valve Lift w/o Valve Clearance Intake - 11 Valve Lift w/o Valve Clearance Exhaust - 11 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25
Show More Show Less
Schrick - Corporate Logo
T#:26638223
Part#: 005601880-00
Special Order: No Guaranteed ETA
$ 1,189.99 USD
Free Shipping on orders $49 and up
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 288 Duration Intake @ 1mm - Duration Exhaust - 288 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 3 Cam Lobe Lift Exhaust - 7, 3 Valve Lift w/o Valve Clearance Intake - 11, 4 Valve Lift w/o Valve Clearance Exhaust - 11, 4 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25
Show More Show Less