If your vehicle has started leaking coolant around the intake area and it is not the pipes, it is probably the valley pan.

This URO replacement has a high temperature and chemical resistant FKM Fluorocarbon Viton® rubber gasket to reduce the chance of leaks and increase the life of the gasket. This valley pan also features a gasket retention step to keep the gasket in place during installation and also reduce the chance of the gasket blowing out from pressure.

MINI R55+ Sneed4Speed N Series Engine Cylinder Head Bolts Kit

Upgrade your MINI's engine with the MINI R55+ Sneed4Speed N Series Engine Cylinder Head Bolts Kit. Engineered for performance and durability, this kit includes high-quality cylinder head bolts designed specifically for N series engines. Ensure a secure and reliable seal for your cylinder head with this premium bolt kit from Sneed4Speed.

• Specifically designed for MINI R55+ models
• High-quality bolts ensure secure cylinder head seal
• Engineered for performance and durability
• Provides peace of mind for engine reliability
• Easy installation for hassle-free upgrade

MINI N14 N18 1.6L SNEED4SPEED Stock Connection Rods

A reliable upgrade for Mini vehicles, enhancing engine performance and durability. Engineered with precision and quality materials, these stock connection rods ensure optimal power delivery and longevity for the N14 and N18 1.6L engines.

• Provides improved strength and durability over stock rods
• Enhances engine performance for a more exhilarating driving experience
• Precision engineering ensures perfect fit and compatibility with Mini vehicles
• Designed for easy installation with no modifications required

MINI R56 N18 Street Series Piston Set Of 4 - Plus Size 77.50mm (+0.50) is a high-performance upgrade designed to enhance engine performance and reliability. This set includes four pistons with a complete ring set pre-installed.

• Enhanced Performance: Designed to increase engine displacement with a plus size of 77.50mm (+0.50), improving overall power and efficiency.
• Complete Ring Set: Each piston comes with three rings: a top compression ring, a second compression ring, and an oil control ring. The oil control ring is made up of three individual rings (two thin rings and one wavy metal ring) all installed in a single groove.
• Pre-installed Rings: Pistons come with the rings already installed, reducing installation time and complexity.
• Durable Construction: Crafted as cast pistons for reliable performance under street conditions.

Sneed4Speed proudly presents their Forged H Beam Connecting Rods, tailored to fit R56, R55, R57, R58, R59, R60, and R61 MINIs equipped with the N14 and N18 engines. Crafted from resilient 4340 forged steel, these connecting rods are built to withstand the demands of high-performance engines, boasting a remarkable 700 horsepower rating. This makes them a superb choice for budget-conscious builders aiming to achieve significant power gains.

What sets these connecting rods apart is their direct fit and replacement design, ensuring a straightforward installation process for MINI enthusiasts. But that's not all – these rods come backed by an extraordinary 100-year warranty, providing unparalleled peace of mind to vehicle owners.

Furthermore, the kit includes high-quality chrome moly rod bolts, rated at an impressive 180,000 psi, capable of supporting up to 1000 horsepower. Elevate your MINI's performance and reliability with Sneed4Speed's Forged H Beam Connecting Rods.

Has your BMW's with the N62 V8 engine developed a coolant leak at the front of the engine from the timing cover weep hole? If so the it is likely that the coolant transfer pipe seal, located below the intake manifold has developed a leak. Normally, replacing the seal on this pipe would require almost 40 hours of labor and involve removing the entire engine from the car, then removing the cylinder heads, and timing covers. With this new collapsible pipe this repair can be accomplished in under 10 hours! This solution will save you or your mechanic from a bunch of headaches and get your V8 back on the road leak free!

With more than 100 years in the industry, Elring is one of the oldest names in the European autoparts segment. Delivering OE-quality you can rest assured the job will be done right the first time. 

video: N62 Cooling Pipe Replacement

Supplement Gasket Kit Parts List

(click to expand)

BMW p/nQtyDescription

115317100481Rear Engine Block O-ring,

115175077171Heat Pipe w O-ring

115175085351Water Pump Gasket

115114399761Valley Pan Pipe Pump

111475072781Valley Pan w Gasket

116175211812Intake Manifold Gasket

071199035962Camshaft Adjuster O-ring

123114399881Alternator Feed Pipe

750il gasket kit deletes 11617521181 and 07119903596 and adds - 8 - 11617537999 profile gaskets

This item fits the following BMWs:
2004-2010 E60 BMW 545i 550i
2004-2010 E63 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li
2004-2006 E53 BMW X5 4.4i X5 4.8is
2007-2013 E70 BMW X5 4.8i xDrive48i

Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicone steel These springs are manufactured with state-of-the-art equipment. Ferrea springs are heat-treated and stress-relieved, which dramatically increases the spring's life. Strict quality control procedures and cycle testing ensures consistency from batch to batch. Ferrea valve springs provide the stability needed for high lift, high rpm racing and street car engines. Kit includes a set of 24 springs. MUST be used with the Ferrea Spring Seat and Titanium Retainers. See links below. 

https://www.turnermotorsport.com/e/p-163-e36-325-328-m3-ferrea-spring-seat-set/ 

https://www.turnermotorsport.com/e/p-31-e36-325-328-m3-ferrea-titanium-retainer-set/

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

MINI R56 owners can enhance their engine performance with the Sneed4Speed Engine Main Bearing Set. This high-quality set is meticulously crafted to improve durability and reliability, offering superior support to the engine's rotating assembly. Designed for precise fitment and long-lasting performance, these main bearings ensure consistent lubrication and reduce friction within the engine. Perfectly engineered to meet high-performance demands, this bearing set is a crucial upgrade for keeping the MINI R56 engine running smoothly and efficiently.

• Enhances Engine Durability and Reliability: Improves the overall strength and dependability of the engine.
• Optimal Support to the Rotating Assembly: Provides necessary support to maintain engine balance and performance.
• Precise Fitment and Longevity: Ensures a perfect fit and long-lasting use.
• Minimizes Friction and Enables Consistent Lubrication: Reduces wear and tear by ensuring smooth lubrication.
• Engineered for High-Performance Demands: Designed to handle the stress of high-performance driving.