Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as our other popular silicone hose products, this OE replacement elbow offers enhanced durability and performance.

• Direct bolt-on OE replacement. No modifications required.
• OE part is not available from MINI
• Four-ply 100% silicone construction.
• Eliminates OE hose failure caused by age, environmental exposure, heat, and high boost pressure.
• Easy to install with basic hand tools.
• Comes with two stainless steel lined hose clamps.

Perfect for high-performance MINIs running increased boost, this M7 Speed Cold Side Lower Intercooler Elbow is designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure. The kit includes one silicone elbow and two high-quality lined stainless steel clamps. Currently available only in BLACK, this elbow is easy to install by any moderately skilled DIY car enthusiast using basic hand tools.

If you plan on turning up the boost on your car these charge pipes are a must-have! Full aluminum charge pipes ready to install in factory location.

S58 equipped cars are an absolute weapon on the road and track. Although BMW has upgraded their charge pipe design they are no match for the upgraded FTP charge pipes.

In years past the BMW charge pipes were made from flimsy plastic that ended up failing rather quickly and/or blowing apart due to the constant heat cycling in the engine. For the S58 BMW stepped it up a notch with a combination of rubber piping with aluminum flanges. The issue with the rubber hoses are that they can expand and contract which allow for fluctuating pressure and over time, failure. When upgrading to the full aluminum charge pipes you get a constant hold of pressure to keep your turbos, engines, and computer happy with consistent pressure.

The FTP charge pipes come with all the necessary o-rings, clamps, flanges, and oem mounting for a direct and simple installation.

Features and benefits:

Upgraded aluminum that wont expand under pressure
Smooth flow path
Durable black powder coat
OE mounting for DIRECT FITMENT
Clips, flanges, seals included for installation

Enhance the performance of your BMW with the S55 Turbo Intake Pipe. Designed to address the limitations of the original pipe, this upgrade is essential for boosting the turbocharger or increasing boost value. By improving airflow into the turbo, this intake pipe enhances turbo response, increases airflow, and reduces turbo lag. Enjoy increased flow and a direct OEM replacement with this 3-ply silicon coupler intake pipe.

Benefits:

• Improves turbo response
• Increases airflow
• Reduces turbo lag
• Direct OEM replacement for easy installation

MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is an essential upgrade for Mini enthusiasts looking to enhance the performance of their MINI N18 1.6L engine. This high-quality charge pipe, in sleek black finish, is designed to increase airflow and reduce turbo lag for improved throttle response and power delivery.

Crafted with precision engineering and durable materials, the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black ensures a perfect fit and reliable performance. It effectively increases the efficiency of the intercooler system, allowing for cooler and denser intake air for better engine performance.

• Enhances performance of MINI N18 1.6L engine
• Increases airflow and reduces turbo lag
• Improves throttle response and power delivery
• Sleek black finish adds aesthetic appeal
• Crafted with precision engineering and durable materials
• Ensures perfect fit and reliable performance

Investing in the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is a smart choice for Mini owners looking to unlock the full potential of their vehicle's engine.

Upgrade your Mini's performance with the M7 Speed COLD SIDE Intercooler Elbow Kit paired with the HOT SIDE Charge pipe in striking BLACK color. This comprehensive intercooler pipe kit optimizes airflow, ensuring maximum flow and minimal pressure drop from the turbo to the throttle body. Crafted from premium four-ply fabric reinforced 100% silicone material, this kit not only boosts power and throttle response but also enhances the under-hood aesthetics of your vehicle. By replacing OE parts, it eliminates high boost failures and removes the OE hose side muffler and cold side sound chamber for improved throttle response and increased mid-range to top-end power. The kit includes six high-quality lined stainless steel clamps, providing a complete solution for installation using basic hand tools.

• Maximizes airflow for increased power
• Improves throttle response and mid-range to top-end power
• High-quality four-ply fabric reinforced 100% silicone material
• Enhanced under-hood appearance
• Eliminates OE hose side muffler and cold side sound chamber
• Complete kit for easy installation with basic hand tools

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete your MINI's intake system with silicone components. It offers a matching set for your engine bay.

M7 Speed proudly announces the release of its newly developed 100% silicone, four-ply fiber reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. This direct OE replacement part provides superior durability, enhanced airflow, and virtually unlimited service life. Beyond its outstanding performance, it also adds a striking under-hood appearance that MINIs desperately need.

Unlike other similar hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit comes complete with three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N14 turbocharged engine that have one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

Upgrade your Mini's intake system with the M7 Speed Silicone Intake Hose Kit, including the intake boot, hot side boot, and cold side elbow kit. Crafted from 100% silicone materials resistant to oil and chemicals, this kit offers superior durability, improved airflow, and virtually unlimited service life. Benefits include:

• Direct OE replacement part for easy installation.
• Superior durability and airflow compared to stock parts.
• Retains stock PCV connection location and size.
• No modifications or cutting required for installation.
• 33% larger inside flow volume for enhanced performance.
• Available in four standard M7 colors for customization.
• Easy DIY installation with included stainless steel clamps and instructions.

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as other popular M7 silicone hose products, this OE replacement elbow offers enhanced durability and performance.

Key Features:

• Direct factory OE replacement with no modifications required
• Smooth and larger bend compared to the convoluted molded rubber OE part
• Resistant to age, oil reaction, high boost applications, and environmental damage
• Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure
• Includes one silicone elbow and two high-quality lined stainless steel clamps
• Easy installation with basic hand tools
• Currently available only in BLACK

Upgrade your MINI's performance with the M7 Speed Cold Side Lower Intercooler Elbow, designed to replace the OE rubber elbow prone to failure over time. With its durable silicone construction and easy installation, this elbow is perfect for high-performance MINIs running increased boost.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI's performance with the M7 Speed 100% silicone four-ply fiber reinforced intake hose, a direct OE replacement part designed to enhance durability, airflow, and service life. Not only does it improve performance, but it also adds a sleek under-hood WOW factor that MINIs desperately need.

M7 Speed proudly introduces its newly developed intake hose for all MINIs equipped with the N14 turbocharged engine, available in four standard M7 colors (BLACK, RED, BLUE, and GREEN). Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, ensuring hassle-free installation without any modifications. This eliminates the risk of triggering a Check Engine Light (DTC code) by disrupting the PCV electrical connection. The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.