The stock M57 charge pipe relies on a weak rubber bend that deteriorates over time under high heat and pressure. Worse yet, the original part features an outer wire reinforcement that is notorious for rubbing directly against the hose, wearing through the rubber, inevitably causing a boost leak. If you’ve turned up the boost on your diesel build, it’s not a matter of if the factory hose will fail, but when.

Thankfully, our team of dedicated BMW diesel enthusiasts has engineered a smarter, more durable fix. This replacement hose is constructed from high-grade fluorosilicone with multi-layer internal fiber reinforcement. By moving the reinforcement layers inside the hose wall, our design eliminates the external friction that destroys the rubber coupler while giving the hose the tensile strength needed to hold higher boost pressures effortlessly.

Installation requires cutting off the original, worn-out rubber hose section from your factory charge pipe assembly and clamping the new reinforced silicone hose in its place using the provided T-bolt clamps.

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as our other popular silicone hose products, this OE replacement elbow offers enhanced durability and performance.

• Direct bolt-on OE replacement. No modifications required.
• OE part is not available from MINI
• Four-ply 100% silicone construction.
• Eliminates OE hose failure caused by age, environmental exposure, heat, and high boost pressure.
• Easy to install with basic hand tools.
• Comes with two stainless steel lined hose clamps.

Perfect for high-performance MINIs running increased boost, this M7 Speed Cold Side Lower Intercooler Elbow is designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure. The kit includes one silicone elbow and two high-quality lined stainless steel clamps. Currently available only in BLACK, this elbow is easy to install by any moderately skilled DIY car enthusiast using basic hand tools.

If you plan on turning up the boost on your car these charge pipes are a must-have! Full aluminum charge pipes ready to install in factory location.

S58 equipped cars are an absolute weapon on the road and track. Although BMW has upgraded their charge pipe design they are no match for the upgraded FTP charge pipes.

In years past the BMW charge pipes were made from flimsy plastic that ended up failing rather quickly and/or blowing apart due to the constant heat cycling in the engine. For the S58 BMW stepped it up a notch with a combination of rubber piping with aluminum flanges. The issue with the rubber hoses are that they can expand and contract which allow for fluctuating pressure and over time, failure. When upgrading to the full aluminum charge pipes you get a constant hold of pressure to keep your turbos, engines, and computer happy with consistent pressure.

The FTP charge pipes come with all the necessary o-rings, clamps, flanges, and oem mounting for a direct and simple installation.

Features and benefits:

Upgraded aluminum that wont expand under pressure
Smooth flow path
Durable black powder coat
OE mounting for DIRECT FITMENT
Clips, flanges, seals included for installation

Enhance the performance of your BMW with the S55 Turbo Intake Pipe. Designed to address the limitations of the original pipe, this upgrade is essential for boosting the turbocharger or increasing boost value. By improving airflow into the turbo, this intake pipe enhances turbo response, increases airflow, and reduces turbo lag. Enjoy increased flow and a direct OEM replacement with this 3-ply silicon coupler intake pipe.

Benefits:

• Improves turbo response
• Increases airflow
• Reduces turbo lag
• Direct OEM replacement for easy installation

MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is an essential upgrade for Mini enthusiasts looking to enhance the performance of their MINI N18 1.6L engine. This high-quality charge pipe, in sleek black finish, is designed to increase airflow and reduce turbo lag for improved throttle response and power delivery.

Crafted with precision engineering and durable materials, the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black ensures a perfect fit and reliable performance. It effectively increases the efficiency of the intercooler system, allowing for cooler and denser intake air for better engine performance.

• Enhances performance of MINI N18 1.6L engine
• Increases airflow and reduces turbo lag
• Improves throttle response and power delivery
• Sleek black finish adds aesthetic appeal
• Crafted with precision engineering and durable materials
• Ensures perfect fit and reliable performance

Investing in the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is a smart choice for Mini owners looking to unlock the full potential of their vehicle's engine.

M7 Speed Silicone Intake Hose for N14 Turbocharged MINIs

Elevate your MINI's performance and style with the M7 Speed 100% silicone four-ply fiber reinforced intake hose. This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds the coveted under-hood WOW factor that MINIs need.

M7 Speed proudly introduces its newly developed intake hose designed for all MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose ensures a seamless integration into your MINI's engine bay while providing exceptional performance.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size. This means you can install it without any modifications, ensuring no disruption to the PCV electrical connection and eliminating the risk of initiating a DTC code (Check Engine Light). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions for hassle-free setup.

Crafted from 100% silicone materials resistant to oil and most chemical damage, this intake hose is designed for high-temperature continuous service up to 300°F (149°C). Its four-ply fiber reinforced construction ensures maximum strength and durability. With no modifications or cutting required for installation, this hose offers a 33% larger inside flow volume compared to the stock part, promoting better airflow to the turbocharger.

Key Features:

• Direct OE replacement part
• Superior durability
• Improved airflow
• Virtually unlimited service life
• Retains stock PCV connection location and size
• Easy DIY installation
• Available in four standard M7 colors
• Dimensions: 2.75” (70mm) ID at the MAF sensor, 1.97” (46mm) ID at the turbo inlet

Upgrade your Mini's performance with the M7 Speed COLD SIDE Intercooler Elbow Kit paired with the HOT SIDE Charge pipe in striking BLACK color. This comprehensive intercooler pipe kit optimizes airflow, ensuring maximum flow and minimal pressure drop from the turbo to the throttle body. Crafted from premium four-ply fabric reinforced 100% silicone material, this kit not only boosts power and throttle response but also enhances the under-hood aesthetics of your vehicle. By replacing OE parts, it eliminates high boost failures and removes the OE hose side muffler and cold side sound chamber for improved throttle response and increased mid-range to top-end power. The kit includes six high-quality lined stainless steel clamps, providing a complete solution for installation using basic hand tools.

• Maximizes airflow for increased power
• Improves throttle response and mid-range to top-end power
• High-quality four-ply fabric reinforced 100% silicone material
• Enhanced under-hood appearance
• Eliminates OE hose side muffler and cold side sound chamber
• Complete kit for easy installation with basic hand tools

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to fully upgrade your intake system with matching silicone parts for your engine bay.

Introducing M7 Speed’s newly developed 100% silicone, four-ply fiber-reinforced intake hose for MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. It not only boosts performance but also adds a striking under-hood WOW factor that MINIs crave.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This means no disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code). The kit includes three stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, which has one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals
• Designed for continuous service at high temperatures (300°F [149°C])
• Four-ply fiber-reinforced construction for maximum strength and durability
• Retains stock PCV connection location and size for easy installation
• No modifications or cutting required for installation
• 33% larger inside flow volume compared to the stock part
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger
• Available in four standard M7 colors
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet
• Easy DIY installation

M7 Pre-Intercooler Charge Pipe for MINI

Upgrade your MINI's performance with the M7 Pre-Intercooler Charge Pipe, a silicone hose designed to replace the stock piping between the turbocharger's outlet and the intercooler's inlet. Unlike OEM parts that feature restrictive piping and baffles, this charge pipe ensures uninterrupted airflow for enhanced turbocharger sound and performance.

Benefits:

• Smooth inner walls and mandrel bends allow uninterrupted airflow
• Enhances turbocharger sound for a more exhilarating driving experience
• Dyno-tested gains of 3.6 horsepower and 11.3 ft-lb of torque at the wheels
• Available in BLACK, RED, and BLUE to complement your MINI's engine bay
• Proudly made in the USA for quality assurance

Upgrade your B48/B46 JCW engine MINI Cooper with the FTP Charge Pipe for enhanced performance and reliability. This aluminum pipe replaces the factory plastic pipe, offering increased durability and resistance to boost pressure. With a larger piping size, it reduces turbulence and maximizes airflow into the engine, resulting in improved engine efficiency and power output. Experience direct replacement and enjoy a smoother, more responsive driving experience with the FTP Charge Pipe.

• Increases flow and improves reliability
• Replaces brittle factory plastic pipe
• Reduces turbulence for maximum airflow
• Direct replacement for easy installation