This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
The TMS Water Temp Sensor Wiring Adaptor is needed when you are upgrading to OBD-I (1992-1995 components) on a 3.2 or 2.8 liter engine. These earlier engines use two separate water temp sensors in the head, one for the ECU and one for the instrument cluster. Most of the 3.2 and some of the 2.8 liter engines do not have two holes drilled in the head for the early water temp sensors. This is due to the fact that the 3.2 and 2.8 engines used a combined water temp sensor. So we designed a easy to use plug and play wiring harness. The benefits are: No cutting and splicing, no trying to fine plugs and pins. We also suggest using TMS "3.2 in a 3.0" Coolant Hose Adapter P/N: TEN9931007 to make your life easier.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
All vehicles will lose some degree of performance due to heat soak under the right operating conditions. Engine management systems constantly monitor operating conditions and modifying parameters based on sensor inputs. BMW integrated the intake air temp sensor in the MAF housing on models such as the E39 M5, and, being sandwiched behind a hot radiator and in some applications next to an even hotter valve cover, this is less than ideal for performance applications. Absorbing excess heat from its surroundings, the MAF can’t shed it fast enough, and the ECU reads an inaccurately high intake air temperature. Compensating for this false hot air measurement, the ECU pulls timing and runs a richer fuel mixture, resulting in a significant loss of torque.
What can you do? Locate an intake air temp sensor in a location where it can properly measure incoming air temps and where it's less prone to heat soak. Mounting the sensor further away from the heat source and isolating it from the MAF housing, it can both resist the effects of heat soak longer and respond to temperature changes more quickly. The result is you’ll experience reduced torque loss and more consistent power output when you’re pushing your engine hard.
The Turner engineering team was initially skeptical of the claimed performance benefits of this modification. They first set out validate the functionality and performance benefit of a temp sensor relocation. Replicating stop-and-go traffic heat soak in a 2001 540i was a simple task in a controlled environment - their dynometer. First the car was heat soaked to simulate being stuck in traffic or moving at low speeds by running the car four times on the dyno with the dyno's cooling fans disabled. The fans were then turned on for three more runs to observe the recovery rate once air flow was reintroduced. The test: following this procedure once with a stock IAT, and once with their relocation kit in place.
The result? Turner recovered 11lb-ft torque at 2500rpm through use of their relocation kit, with even greater recovery to be found for M5 owners. Here are the heat soak-related torque losses Turner experienced:
Stock IAT location:
18rwtq at 2500rpm
10rwtq at 3000rpm
9rwtq at 3700rpm
Turner IAT Relocation:
7rwtq at 2500rpm
5rwtq at 3000rpm
5rwtq at 3700rpm
**Click here for installation instructions**
The Turner engineering team designed a complete plug and play kit (unlike all other options on the market) that makes for quick, easy, and reversible installation. Weather-sealed connectors keep out the elements, while sheathed wiring offers a clean appearance underhood. With a harness nearly 3 feet long - the Turner IAT relocation kit offers flexibility in positioning, but not too long that you're left with unsightly excess wiring. Turner recommends positioning the sensor in a location away from engine heat, but still within the intake ducting to achieve accurate intake temp readings - such as the far side of the base of the airbox. Vehicles with cold air intakes with cone-style filters can even position the sensor in the end of the filter. Simply drill a hole in your (cool) location of choice and plug in the harness. More information including installation instructions and some good examples of sensor mounting locations can be found in our DIY PDF.
We include everything you need to relocate your IAT, just select your desired sensor brand below - Genuine BMW or original equipment Beru.
Also the perfect plug-n-play option for anyone looking to upgrade their intake to utilize an Alpha-N tune!
Note for vehicles with M62 engine: applicable to 1999 and up
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
08-03-2026
This product was last offered at the strikethrough price on
03-09-2026
Knock sensors detect pings in the engine and adjust ignition timing to restore perfect operation. Faulty knock sensors will throw engine codes or even lead to engine damage. Replace your sensor with a reliable, high quality Bosch sensor to ensure proper engine ignition timing.
Bosch # 12141741648 OEM replacement for BMW part # 12141741648.
Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely s eupplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Fits the following vehicles:
1996-09/1999 E39 BMW 540i
1995-09/1999 E38 BMW 740i 740iL
1990-1999 E31 BMW 840Ci
The URO Camshaft Position Sensor - BMW E36 Z3 M42 M44 is an essential component for precise engine timing and efficient performance. Also known as the pulse generator, this sensor mounts to the side of the cylinder head and detects the camshaft’s position to optimize fuel injection and ignition timing. A failing sensor can trigger engine fault codes, cause rough idling, misfires, or poor fuel economy. Replacing a faulty camshaft position sensor restores accurate timing, ensuring smooth operation and peak efficiency for your BMW E36, Z3, M42, or M44 engine.
Replacing your factory environmental air catalyst sensor can be quite a headache when it's integrated into the radiator, causing a 2AD8 trouble code. But fear not! URO Parts has a solution with their standalone replacement sensor, making this repair much more manageable and cost-effective.
Key Features:
Guaranteed Fitment: Designed to fit perfectly, ensuring compatibility with your vehicle. Direct OE Replacement: Restores your factory cooling fan sensor's functionality seamlessly. Plug-and-Play Installation: Easy to connect, saving you time and hassle during installation. High-Quality Construction: Crafted from durable materials to withstand the heat of the engine compartment and cooling system. Low Electrical Resistance: Alloy conductors reduce resistance for accurate sensor operation. Reliable and Long-Lasting: Tested for reliability and engineered for a long service life. If you're dealing with a "direct ozone reduction catalyst temperature gradient too low" SES code, upgrading to this high-quality sensor from URO Parts is the solution you need.
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
08-13-2026
Knock sensors detect pings in the engine and adjust ignition timing to restore perfect operation. Faulty knock sensors will throw engine codes or even lead to engine damage. Replace your sensor with a reliable, high quality Bosch sensor to ensure proper engine ignition timing.
Bosch # 13627568421 OEM replacement for BMW part # 13627568421, 12141709317, and 12141435502.
Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
The URO Camshaft Position Sensor - E34 E36 | M20 M50 S50 Engines is a high-quality replacement component designed to restore proper engine operation and eliminate trouble codes or check engine lights. Replacing a failed original camshaft position sensor instantly improves engine performance by ensuring accurate timing signals for optimal fuel injection and ignition. With a direct-fit OE replacement design, this sensor offers easy installation, allowing for a seamless plug-and-play setup. Manufactured using premium polymer and metal materials, it withstands high engine temperatures, ensuring reliable performance over the long term.
This product was last offered at the strikethrough price on
03-17-2026
This product was last offered at the strikethrough price on
03-16-2026
Ensure precise timing in your BMW engine with this Camshaft Gear Sensor, also known as the "pulse generator". Designed to mount on the side of the cylinder head, this sensor accurately detects camshaft timing. When an engine fault code related to timing emerges, replacement of this sensor becomes essential for optimal engine performance.
The eccentric shaft sensor plays a vital role in controlling valvetronic timing and is often a common issue in BMW vehicles. If you've noticed difficult starts, reduced fuel economy, and overall engine power and performance issues, this component could be the culprit.
Key Features:
Guaranteed Fitment: Designed to fit perfectly, ensuring compatibility with your vehicle. Accurate Positioning: Provides precise shaft position control, even at high RPMs. Direct OE Replacement: Easy to install with its direct-fit design, saving time and effort. Low Electrical Resistance: Alloy connector conductors minimize resistance, ensuring accurate signal transmission. Upgrade to this quality replacement eccentric shaft sensor to restore optimal engine performance and address the symptoms associated with a faulty sensor.
This product was last offered at the strikethrough price on
05-07-2026
Ensure optimal engine performance in your Mini with this Bosch oxygen sensor. Designed to replace a malfunctioning sensor, this unit measures the amount of unburned fuel in the exhaust pipe, allowing for adjustments to fuel mapping for reduced emissions and improved fuel economy.
Upgrade your Mini's engine efficiency and reduce emissions with this high-quality Bosch oxygen sensor.
This product was last offered at the strikethrough price on
04-20-2026
This product was last offered at the strikethrough price on
06-17-2026
This product was last offered at the strikethrough price on
06-17-2026
URO Camshaft Position Sensor - For BMW M52 M54 Engines is the perfect solution for restoring proper engine operation when your original camshaft position sensor has failed. This direct-fit OE replacement sensor eliminates trouble codes and check engine lights, ensuring smooth engine performance. Made from high-quality polymer and metal materials, this sensor is designed to withstand the intense heat of your BMW’s engine. With alloy conductors that minimize electrical resistance, the sensor provides accurate operation across all engine RPMs. Built for reliability and long-lasting performance, it’s the ideal choice for your BMW M52 or M54 engine.
Upgrade your BMW M52 or M54 engine with the URO Camshaft Position Sensor and enjoy reliable engine performance.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Knock sensors detect pings in the engine and adjust ignition timing to restore perfect operation. Faulty knock sensors will throw engine codes or even lead to engine damage. Replace your sensor with a reliable, high quality Bosch sensor to ensure proper engine ignition timing. For cars with M42 Engine.
OEM replacement for BMW part # 12141734580.
Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
1992-1996 E36 BMW 318i 318is 318ic 318ti
The URO Camshaft Position Sensor is an essential component for BMW engines, providing precise data on camshaft position to ensure accurate fuel injection timing and peak engine performance. Designed to meet OEM specifications, this sensor helps optimize ignition timing, contributing to smoother acceleration, enhanced fuel economy, and overall engine efficiency. Available from Turner Motorsport, the URO Camshaft Position Sensor is the ideal replacement part for BMW owners aiming to maintain optimal performance and reliability.
The URO Camshaft Position Sensor is a cost-effective solution for BMW owners looking to keep their engine running smoothly and efficiently, delivering the performance and dependability they expect.
