Precision Raceworks Fuel Lines & Hoses

Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37757295

Part#: 601-0240

Back Ordered

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094311

Part#: 201-0188

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

Seamless fit – Compatible with most aftermarket top mount port injection manifolds
Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
Leak-proof design – Dual-seal quick connectors for maximum fuel safety
High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
Easy installation – Direct plug-and-play with factory and aftermarket fuel lines

Show More Show Less

Precision Raceworks Upgraded Fuel Lines W/ Ethanol Sensor Connection ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:10714270

Part#: 201-0247

In Stock

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

NOTE: Requires a Continental Flex Fuel Sensor be utilized, will not directly replace the OE fuel line. The Precision Raceworks AN6 Fuel line upgrade is a direct replacement from the fuel filter on the driver’s side of the car to the high-pressure fuel pump. All connections are designed in-house and machined from 6061 aluminum then anodized for 100% E85 compliance. All female connectors have 2 seals (a primary and secondary seal) to guarantee no possible fuel leaks. The fuel line used by Precision Raceworks is smooth bore PTFE hose that is wrapped in a Stainless Steel braiding for protection and then a nylon braiding to protect surfaces. This type of hose is used in high-end E85 applications built all over the world. This is a better than OEM quality solution to help you achieve the needs of your high horsepower build on E85. Specifications: Fuel hose type: PTFE Smooth Bore Line Size: -6AN (1/2") Connection Style: OEM Quick Connect Connector Material: 6061 Aircraft Grade Aluminum Connects to flex fuel sensor: Yes

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161736

Part#: 201-0405

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

AN6 Male Flare/ORB To 5/16" (7.89mm) Female Quick Connect

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094309

Part#: 201-0274

Ships in 6 Business Days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?

Show More Show Less

Precision Raceworks Port Injection Fuel Line - Plate Style PI - BMW N...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161752

Part#: 201-0148

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Precision Raceworks' Port Injection Fuel Line is designed to be compatible with most plate-style port injection kits on the market. Crafted from high-quality 6061 aluminum, all connections are precisely machined and fully compatible with E85 fuel. The female connectors feature dual seals, ensuring a leak-free performance. The fuel line itself is constructed from smooth-bore PTFE hose, a proven choice for numerous E85 applications. This plug-and-play solution seamlessly integrates with both factory and aftermarket fuel rails, offering a hassle-free way to deliver fuel to your port injection system.

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37892104

Part#: 601-0288

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

AN 6 Fuel Lines With Ethanol Sensor Connections - F2x/F3x

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11399223

Part#: 201-0245

Ships in 9 Business Days

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

This is a better than OEM quality solution is direct plug and play replacement for the factory line to help you achieve the needs of your high horsepower build on E85.

Precision Raceworks S58 Port Injection Kit - Blue Anodized - 950cc In...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229129

Part#: 601-0273

Ships in 10 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Silver Anodized - 950cc ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229130

Part#: 601-0277

In Stock

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

7.89mm(5/16") Male - 7.89mm(5/16") Female - Fuel Line Fitting AN6 PTF...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094344

Part#: 201-0177

Ships in 10 Business Days

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Perfect for upgrading or modifying your fuel delivery system, it offers effortless installation and long-lasting reliability in performance-driven builds

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161737

Part#: 201-0406

Ships on Jul 22, 2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

AN 6 Fuel Lines With Ethanol Sensor Connections - F2x/F3x B58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11399222

Part#: 201-0214

Ships in 6 Business Days

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

This is a better than OEM quality solution is direct plug and play replacement for the factory line to help you achieve the needs of your high horsepower build on E85.

9.89mm Fuel Line Fitting AN6 PTFE To Male QC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094338

Part#: 201-0181

Ships in 6 Business Days

$ 18.99

This product was last offered at the strikethrough price on
01-22-2026

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

This fitting allows you to terminate an AN-6 PTFE fuel line with a secure, leak-free 9.89mm male quick-connect, making it an ideal solution for upgrading or modifying fuel delivery systems in high-horsepower, E85, and race-fuel applications.

Show More Show Less

PTFE AN6 Fitting To 7.89mm Male QC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094325

Part#: 201-0176

Ships in 6 Business Days

$ 15.99

This product was last offered at the strikethrough price on
01-22-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

This setup involves a PTFE AN6 fitting that connects to a 7.89mm male quick-connect (QC) fitting, commonly used in fuel or fluid systems. The PTFE hose offers excellent durability, with resistance to chemicals, heat, and pressure. The AN6 fitting ensures a secure connection, while the 7.89mm male QC fitting allows for fast, tool-free connections and disconnections. When choosing this fitting, ensure it's compatible with both your PTFE hose and system. Need help finding the right components?

Show More Show Less

Precision Raceworks Universal AN8 ORB To AN6 Male Flare Adapter ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161738

Part#: 201-0331

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Convert your AN-8 ORB port to an AN-6 Male flare fitting with Viton O-Ring *O-Ring on AN6 side is only utilized if threading into ORB port

PTFE AN6 Fitting To Male AN6 ORB

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094327

Part#: 201-0237

Ships in 10 Business Days

$ 15.99

This product was last offered at the strikethrough price on
01-22-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 fitting to male AN6 ORB is a premium component designed for high-performance fuel and fluid systems. The PTFE AN6 fitting provides a secure connection to a PTFE hose, offering superior durability and resistance to heat, pressure, and chemicals. The male AN6 ORB fitting features an O-ring boss design, guaranteeing a leak-proof, reliable connection in demanding applications.

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Blue Anodized - 750cc In...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229126

Part#: 601-0271

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

Precision Raceworks - Dummy Ethanol Sensor 3/8" Male QC To 3/8" Male ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094347

Part#: 201-0232

Ships in 10 Business Days

$ 16.99

This product was last offered at the strikethrough price on
01-26-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Whether upgrading your fuel system for performance or simply eliminating unnecessary components, this fitting provides an efficient and reliable way to enhance your fuel delivery setup by removing your ethanol sensor

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Silver Anodized - No Inj...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229124

Part#: 601-0280

Ships in 10 Business Days

$ 649.99 USD

Add to Wish List

Qty

$ 649.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

Precision Raceworks Universal AN8 Male ORB To AN6 Female ORB Adapter ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161735

Part#: 201-0404

Ships in 5 Business Days

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Use this adapter to convert your AN8 fuel rail to AN6 female ORB with this helpful fitting!

AN 6 Fuel Lines With Ethanol Sensor Connections - E60

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11399224

Part#: 201-0225

Ships in 10 Business Days

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

This is an OEM quality solution is direct plug and play replacement for the factory line to help you achieve the needs of your high horsepower build on E85.

90 Degree Fitting PTFE AN6 To 9.89 Female QC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094334

Part#: 201-0233

Ships in 10 Business Days

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The AN-6 PTFE 90-Degree Fitting to 9.89mm Female Quick Connect is designed for seamless fuel system integration, featuring a durable air-hose-style quick-release for secure, leak-free connections in high-performance applications.

Show More Show Less

AN6 Female To AN6 Female Adapter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094328

Part#: 201-0266

Ships in 10 Business Days

$ 10.99

This product was last offered at the strikethrough price on
01-22-2026

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

The Precision Raceworks AN6 Female to AN6 Female Adapter is a durable fitting designed to join two AN6 fittings with female threads. It ensures a secure, leak-proof connection, making it perfect for fluid and fuel systems where a smooth, reliable link is needed. This adapter is commonly used to extend hose lengths or adjust configurations while keeping the same AN6 size.

Show More Show Less

45 Degree Fuel Line Fitting PTFE To Female Flare AN6

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094333

Part#: 201-0231

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Whether you're modifying your fuel lines for increased horsepower, adding a secondary fuel system, or upgrading to a more efficient setup, this 45-degree plug-and-play PTFE fitting delivers unmatched performance, easy installation, and rock-solid reliability.

Show More Show Less

Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47679263

Part#: 601-0332

Ships in 10 Business Days

$ 2,228.99 USD

Add to Wish List

Qty

$ 2,228.99 USD

Add to Wish List

The Precision Raceworks Stand-Alone Auxiliary Fuel System is the highest performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection!

Since direct injection came out, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically, this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential.

Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure, low volume, resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep the target AFR in check.

With this stand-alone low-pressure fuel system dedicated to your port fueling, that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures which are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), and put less demand on the car’s DI system to correct for fluctuations in pressure. Even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate. The list of benefits goes on and on!

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Black Anodized - No Inje...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229123

Part#: 601-0278

Ships in 10 Business Days

$ 649.99 USD

Add to Wish List

Qty

$ 649.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

Precision Raceworks PTFE Fuel Line Fitting - AN-6 To 7.89mm Female QC...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094320

Part#: 201-0178

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

he Precision Raceworks PTFE Fuel Line Fitting is a 180-degree AN-6 female flare fitting designed for high-performance fuel systems.onstructed from durable PTFE material, it ensures compatibility with various automotive applications.his universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. *Features:** **AN-6 Compatibility:** Designed to connect AN-6 male flare fittings to AN-6 female flare fittings at a 180-degree angle. **Durable Construction:** Made from high-quality PTFE material for enhanced durability and resistance to fuel additives. **Universal Fitment:** Suitable for a wide range of vehicle platforms, offering flexibility in fuel line routing. **High-Performance Design:** Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. or more information, visit the product page:citeturn0search0

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Blue Anodized - No Injec...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:33213285

Part#: 601-0279

Ships in 10 Business Days

$ 649.99 USD

Add to Wish List

Qty

$ 649.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

Precision Raceworks Port Injection Fuel Line For Manifold Kit - BMW G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47679253

Part#: 201-0358

Ships in 10 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Use this fuel line kit to replace the OEM flex line from the fender to the HPFP and add an AN6 tee for adding Port Injection. Port Injection Line included

PTFE AN6 Fitting To Male AN6 Flare

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094326

Part#: 201-0243

Ships in 10 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

A PTFE AN6 fitting to male AN6 flare is commonly used in fuel or fluid systems. The PTFE AN6 fitting ensures a secure connection to a PTFE hose, offering superior resistance to heat, pressure, and chemicals. The male AN6 flare fitting provides a tight, leak-proof seal, ideal for high-performance applications that require dependable, durable connections.

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Black Anodized - 750cc I...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229125

Part#: 601-0270

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

Swivel Fuel Line Fitting AN6 PTFE To AN6 ORB

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094346

Part#: 201-0175

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Upgrade your fluid system with a reliable, Precision Raceworks AN-6 PTFE fitting to AN-6 ORB, designed for maximum efficiency and ease of installation.

9.49 (3/8") PTFE AN6 90 Degree Fitting To Female QC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094339

Part#: 201-0227

Ships in 10 Business Days

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Upgrade your fuel system with the Precision Raceworks 90-degree fitting, and experience the convenience of air hose-style quick connects for efficient and easy-to-manage fuel system setups.

AN6 PTFE To 3/8" Female Quick Connect

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094343

Part#: 201-0180

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

This high-quality fitting is designed for seamless integration with an ethanol content sensor or a 3/8" male quick disconnect.

3/8" PTFE AN6 To Female Swivel QC With 1/8" NPT Port

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094342

Part#: 201-0241

Ships in 10 Business Days

$ 36.99

This product was last offered at the strikethrough price on
01-22-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Upgrade your fuel system or fuel lines with this premium AN-6 PTFE fitting, enhancing reliability and performance for your build.

9.89mm To 7.89mm Fuel Line Fitting 90 Degree Double Quick Connect ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094341

Part#: 201-0182

Ships in 10 Business Days

$ 36.99

This product was last offered at the strikethrough price on
01-22-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Engineered for seamless fuel system integration, this precision-machined 90-degree fitting is designed with a 7.89mm female quick connect on one end and a 9.89mm female quick connect on the other. Built for maximum convenience, it features an air hose-style quick connect system, ensuring effortless, secure connections without the need for special tools.

Show More Show Less

PTFE To AN-6 Female Flare - Fuel Line Fitting

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094323

Part#: 201-0179

Ships in 10 Business Days

$ 15.99

This product was last offered at the strikethrough price on
01-22-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Precision Raceworks PTFE to AN-6 Female Flare Fuel Line Fitting is designed for high-performance fuel systems. Constructed from durable PTFE material, it ensures compatibility with various automotive applications. This universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. Features: AN-6 Compatibility: Designed to connect PTFE fuel lines to AN-6 female flare fittings, ensuring a secure and leak-free connection. Durable Construction: Made from high-quality PTFE material, offering resistance to fuel additives and high temperatures. Universal Fitment: Suitable for a wide range of vehicles, providing flexibility in fuel line routing. High-Performance Design: Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. For more information, visit the product page on Precision Raceworks' website.

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Silver Anodized - 750cc ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229127

Part#: 601-0276

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

PTFE Fuel Line Fitting 135 Degree AN-6 Female Flare

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094331

Part#: 201-0222

Ships in 10 Business Days

$ 29.99

This product was last offered at the strikethrough price on
01-22-2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 135-Degree AN-6 Female Flare is a premium component designed for optimal fuel system routing. Its 135-degree angle enhances flexibility and provides better clearance in confined spaces. The AN-6 female flare connection ensures a secure, leak-proof fit, while its PTFE compatibility offers exceptional resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

PTFE AN6 Fitting To 7.89 (5/16") Female QC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094321

Part#: 201-0228

Ships in 10 Business Days

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 Fitting to 7.89mm (5/16") Female Quick Connect is a 90-degree fitting designed to connect your PTFE AN-6 fuel line to a 5/16" female quick connect. It features an air-hose style quick connect for easy connections. This fitting is compatible with various automotive applications, providing flexibility in fuel line routing.

Show More Show Less

Vise Jaws For AN Fittings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094329

Part#: 101-0228

Ships in 10 Business Days

$ 36.99

This product was last offered at the strikethrough price on
01-22-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Vise jaws for AN fittings are essential tools that securely hold AN fittings during assembly or disassembly. Made from soft aluminum or plastic, they prevent damage by firmly gripping the fittings without scratching or marring the surface. These jaws help preserve the integrity of threads and sealing surfaces, ensuring leak-proof and reliable connections in fuel or fluid systems.

Show More Show Less

AN6 Male Flare/ORB To 3/8" Female Quick Connect

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094330

Part#: 201-0206

Ships in 10 Business Days

$ 26.99

This product was last offered at the strikethrough price on
01-22-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 3/8" Female Quick Connect is a premium fitting designed for fluid and fuel systems. The AN6 male flare/ORB fitting ensures a secure, leak-proof connection with an O-ring boss design. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, making it perfect for high-performance setups that require both reliability and quick access.

Show More Show Less

PTFE Fuel Line Fitting 180 Degree AN-6 Female Flare

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094332

Part#: 201-0264

Ships in 10 Business Days

$ 29.99

This product was last offered at the strikethrough price on
01-22-2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 180-Degree AN-6 Female Flare is a high-quality component engineered for optimal fuel system routing. Its 180-degree design enables smooth, compact hose placement in confined spaces. The AN-6 female flare connection ensures a tight, leak-proof seal, while its PTFE compatibility offers superior resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

Replacement Ferrule For PTFE Fittings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094322

Part#: 101-0185

Ships in 10 Business Days

$ 3.99

This product was last offered at the strikethrough price on
01-22-2026

$ 3.00 USD

Add to Wish List

Qty

$ 3.00 USD

Add to Wish List

Replacement ferrules, also known as olives, are vital components for assembling PTFE fuel lines. These one-time-use metal ferrules are crimped onto the PTFE tube to form a secure, leak-proof connection with the fitting. Once crimped, they can leak if the fitting is loosened or removed. For high-performance fuel systems, Precision Raceworks provides replacement ferrules designed for PTFE fittings. These ferrules are engineered to deliver a reliable seal and preserve the integrity of your fuel line connections. When selecting replacement ferrules, it’s important to choose ones that are compatible with your specific PTFE hose and fittings to ensure maximum performance and safety.

Show More Show Less

PTFE AN6 Fitting To 3/8" Female QC With 1/8"NPT Port

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094324

Part#: 201-0229

Ships in 10 Business Days

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 Fitting to 3/8" Female QC with a 1/8" NPT port is a premium component designed for fuel and fluid systems. The AN6 fitting securely connects to a PTFE hose, offering exceptional resistance to heat, pressure, and chemicals. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, while the 1/8" NPT port allows for additional connections, such as sensors or pressure gauges.

Show More Show Less

90 Degree Fuel Line Fitting AN6 PTFE To AN6 ORB Male Swivel ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094336

Part#: 201-0189

Ships in 10 Business Days

$ 26.99

This product was last offered at the strikethrough price on
01-22-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The AN-6 PTFE 90-Degree Fitting to 9.89mm Female Quick Connect features a durable air-hose-style quick-release for secure, corrosion resistant coating and a leak-free connection for high-performance applications.

Show More Show Less

90 Degree Fuel Line Fitting AN6 PTFE To AN6 Flare Female

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094314

Part#: 201-0174

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

The AN-6 GTFE 90-Degree Fitting to AN-6 Female Flare is a premium-grade, precision-machined adapter crafted for effortless fuel system compatibility and optimal performance.

3-Sides Fuel Line Fitting AN6 Male Flare TEE

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094340

Part#: 201-0221

Ships in 10 Business Days

$ 13.99

This product was last offered at the strikethrough price on
01-22-2026

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Upgrade your fuel system with this Fuel line fitting TEE featuring AN-6 Male threads on all three ends, and enjoy a high-flow, race-ready solution built for maximum performance and reliability.

Double Female 90 Degree 9.89 QC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094349

Part#: 201-0230

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Enhance your fuel system with the Precision Raceworks 90-degree double quick connect, and experience the convenience of professional-grade fittings designed for high-performance applications.

Project Cars

SELECT YOUR BMW

Precision Raceworks Fuel Lines & Hoses

Select Vehicle

Category

Brand

Price

Narrow Results