Find Parts That Fit Your Vehicle

Oil Separation & Breather System

Every car has a crankcase vent system that is supposed to suppress oil from making it into the intake ports and combustion chamber. A good functioning system will separate oil from the atmosphere and return it to the oil pan (or collect it in a catch can) while allowing the leftover vapors to burn in the combustion chamber or recirculate through the system. This has always been known as a PCV system (Positive Crankcase Ventilation) but BMW has several other names for it - oil separator, crankcase vent (CCV), and cyclonic separator. Failures in the system will allow raw oil to enter the intake and eventually into the engine itself which can have disastrous effects on engine performance and longevity. As emissions regulations on oil and gas venting have gotten more stringent the PCV systems have gotten more complex and failure prone. And because the CCV is intertwined with other systems you could experience rough running, loss of power, higher oil consumption, misfiring, stalling, or other annoying issues. There is no replacement interval for these so we recommend inspecting your crankcase vent system as part of your regular maintenance routines. Symptoms of a bad crankcase vent are: whitish or yellowish film on the underside of the oil cap, whistling/squealing noises (not caused by a belt), suction on the oil cap that makes it hard to unscrew, large amounts of white smoke from the exhaust, and excessive oil consumption.

Sub-Categories

Sort By:

Rein - Corporate Logo
T#:39059240
Part#: 11157843150
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
The Crankcase Vent Hose is a crucial component that helps regulate crankcase pressure and prevent oil vapor buildup, ensuring optimal engine performance. Designed as a direct replacement for BMW part number 11157843150, this high-quality vent hose restores proper ventilation to protect vital engine components.
Show More Show Less
Engine Oil Separator Package - Level 2 - E46 325, E39 525i M54 ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:24344785
Part#: M54OILSEPKT
In Stock
Sale - Save 35% $ 177.99

This product was last offered at the strikethrough price on
11-07-2026

$ 115.41 USD
Free Shipping on orders $49 and up
Sale - Save 35%
$ 177.99

This product was last offered at the strikethrough price on
11-07-2026

$ 115.41 USD
Free Shipping on orders $49 and up
If you need to perform a complete oil separator system service, this Level 2 kit provides you with all of the main components necessary to service your engine oil separator system. This Level 2 kit includes the following: Oil Separator Hose from oil separator to dipstick tube Hose from oil separator to valve cover Hose from intake manifold back to the connector hose Hose from oil separator up to the intake manifold Throttle body gasket Throttle body inlet boot ICV rubber grommet Oil dipstick tube o-ring seal It is highly recommended to replace the oil dipstick tube with the updated design by BMW as this also a common place for sludge to build up.
Show More Show Less
Crank Case Vent Hose Kit - S63 4.4L Engine
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:23913949
Part#: CRNKVENTKITKT
In Stock
Sale - Save 3% $ 224.99

This product was last offered at the strikethrough price on
11-07-2026

$ 217.80 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 224.99

This product was last offered at the strikethrough price on
11-07-2026

$ 217.80 USD
Free Shipping on orders $49 and up

Elevate your S63 4.4L engine's capabilities with our meticulously designed Crank Case Vent Hose Kit. Crafted from premium-grade materials, this kit ensures superior ventilation, mitigating pressure accumulation within the engine, thereby enhancing its overall performance.

Engineered to precise specifications, our kit seamlessly replaces the OEM vent hoses, guaranteeing a perfect fit. By reducing stress on the engine, it prolongs its lifespan and maintains peak functionality. Rely on this kit to provide unparalleled performance and unwavering reliability for your S63 4.4L engine.

Show More Show Less

Rein - Corporate Logo
T#:402033
Part#: 11157646086
In Stock
$ 50.99 USD
Free Shipping on orders $49 and up
Connects to the valve cover over cylinders 1-4. These pipes tend to crack after become brittle from numerous heating and cooling cycles. If this happens, OEM Rein pipes are a perfect replacement to restore a tight seal and prevent any check engine codes.
Show More Show Less

Bremmen Crankcase Ventilation Connecting Pipe - Cylinders 1-4 - E70/1...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bremmen Parts - Corporate Logo
T#:640154
Part#: 11157646086
In Stock
Sale - Save 30% $ 53.99

This product was last offered at the strikethrough price on
11-07-2026

$ 37.79 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 53.99

This product was last offered at the strikethrough price on
11-07-2026

$ 37.79 USD
Free Shipping on orders $49 and up
Connects to the valve cover over cylinders 1-4. These pipes tend to crack after become brittle from numerous heating and cooling cycles. If this happens, Bremmen pipes are a perfect replacement to restore a tight seal and prevent any check engine codes.
Show More Show Less
Genuine BMW - Corporate Logo
T#:6684
Part#: 11151406953
Ships in 1-2 days
2% off MSRP $ 53.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 53.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up


Genuine BMW Vent Hose - Zyl. 5-8
This item fits the following BMW Chassis:
E39 M5,E39

Fits BMW Engines including:
S62


Genuine BMW - Corporate Logo
T#:19248
Part#: 11617501562
Ships in 1-2 days
3% off MSRP $ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 84.99 USD
Free Shipping
3% off MSRP
$ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 84.99 USD
Free Shipping
Genuine BMW ENGINE COVER WITH NON-RETURNVALVE
Genuine BMW - Corporate Logo
T#:174248
Part#: 11157646086
Ships in 1-2 days
13% off MSRP $ 127.09

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.00 USD
Free Shipping
13% off MSRP
$ 127.09

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.00 USD
Free Shipping

Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self-evident in the quality and vast amount of applications they serve. With more than 34,000 repair solutions for cars and commercial vehicles, you can be sure Febi has you covered.


Genuine BMW Connecting Line - Zyl 1-4
This item fits the following BMW Chassis:
E71,F01,F02,F10,F12,F13

Fits BMW Engines including:
N63
 

 

Show More Show Less

Rein - Corporate Logo
T#:26404796
Part#: 11157843151
In Stock
$ 32.99 USD
Free Shipping on orders $49 and up

Rein Crank Case Vent Hose is a high-quality replacement part designed to enhance the performance and longevity of your vehicle’s engine. Manufactured by Rein Automotive, this vent hose is built to withstand high pressures and temperatures, ensuring reliable crankcase ventilation. Engineered for a precise fit, it helps prevent harmful oil vapors from entering the intake manifold, improving overall engine efficiency. Available at Turner Motorsport, this vent hose is an ideal choice for drivers looking to maintain their vehicle’s performance and emissions standards.

  • Designed for optimal crankcase ventilation, improving engine performance
  • Reduces oil vapor contamination in the intake system, protecting engine components
  • Made with durable materials to resist wear from heat and pressure
  • Ensures precise fit and easy installation as a direct OEM replacement
  • Helps reduce harmful emissions, supporting cleaner engine operation

Turner Motorsport offers the Rein Crank Case Vent Hose as a dependable solution to keep your engine running smoothly while meeting emissions regulations.

Show More Show Less

Genuine BMW - Corporate Logo
T#:2811
Part#: 11617501563K
In Stock
$ 117.99

This product was last offered at the strikethrough price on
11-13-2026

$ 116.99 USD
Free Shipping
$ 116.99 USD
Free Shipping
When the crankcase vent valve fails it can cause excessive oil consumption, engine fault codes and poor idle. This crankcase vent valve ( also know as Oil separator valve or PCV ) fits E39 540i 97-03 E38 740i 96-01 E31 840ci 96-98.

This kit includes the following parts:
1 x 11617501563 - Intake Manifold Rear Cover with Oil Separator Valve
1 X Rear Intake Manifold Gasket

This item fits the following BMWs:
1997-2003 E39 BMW 540i
1996-2001 E38 BMW 740i 740il
1996-1998 E31 BMW 840ci
Show More Show Less
Extraction Line
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bremmen Parts - Corporate Logo
T#:30629688
Part#: 11157537701
In Stock
Sale - Save 30% $ 29.99

This product was last offered at the strikethrough price on
11-07-2026

$ 20.99 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 29.99

This product was last offered at the strikethrough price on
11-07-2026

$ 20.99 USD
Free Shipping on orders $49 and up
Rein - Corporate Logo
T#:39059261
Part#: 11151747066
Ships in 3 Business Days
$ 31.99 USD
Free Shipping on orders $49 and up

BMW Oil Separator Valve | M60 3.0 / 4.0L is a vital component that ensures proper crankcase ventilation by separating oil vapors from blow-by gases, preventing excessive oil consumption and maintaining engine efficiency. Designed for BMW models equipped with the M60 3.0L and 4.0L engines, this oil separator valve helps reduce carbon buildup and extends the life of essential engine components. For optimal results, it is recommended to replace the valve cover and crankcase ventilation system (CCV) when changing the separator valve.

  • Effectively separates oil vapors to prevent excessive oil consumption
  • Helps maintain proper crankcase ventilation for optimal engine performance
  • Reduces carbon buildup and prolongs engine longevity
  • Direct-fit replacement for BMW M60 3.0L and 4.0L engines
  • High-quality materials ensure durability and resistance to engine heat
  • Recommended to replace valve cover and CCV for complete system maintenance

Ensure the longevity and efficiency of your BMW engine by replacing a worn oil separator valve with this high-quality replacement.

Show More Show Less


Genuine BMW - Corporate Logo
T#:528933
Part#: 11158636541
Ships in 1-2 days
6% off MSRP $ 515.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 485.99 USD
Free Shipping
6% off MSRP
$ 515.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 485.99 USD
Free Shipping
### **Genuine BMW Oil Separator & Seal Kit – Overview** The **Genuine BMW Oil Separator & Seal Kit** is a crucial OEM component designed to optimize engine performance by regulating crankcase ventilation and minimizing oil buildup in the intake system. ### **Key Features:** - **OEM Precision:** Direct-fit replacement, ensuring compatibility and reliability for BMW engines - **Crankcase Ventilation Management:** Prevents excessive oil vapors from entering the intake, reducing carbon deposits - **High Durability:** Constructed from premium materials to withstand high temperatures and pressure - **Complete Kit:** Includes necessary seals and gaskets to ensure a secure, leak-free installation ### **Benefits:** - Prevents oil consumption and sludge accumulation - Enhances engine efficiency and longevity - Reduces emissions by effectively controlling oil vapor circulation Ideal for **routine maintenance** or **replacing a worn PCV system**, this kit helps keep your BMW running at peak performance. Need assistance finding the right part number for your specific model?
Show More Show Less
Genuine BMW - Corporate Logo
T#:177043
Part#: 11157843151
In Stock
$ 108.59 USD
Free Shipping on orders $49 and up


Genuine BMW Vent Hose - Zyl. 5-8
This item fits the following BMW Chassis:
F06,F10,F12,F13

Fits BMW Engines including:
S63N

Rein - Corporate Logo
T#:34080765
Part#: 11151705301
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up

The Rein Crank Case Breather Pipe is a high-quality replacement part designed specifically for BMW models, ensuring proper engine ventilation and maintaining optimal performance. This crucial component prevents pressure build-up in the crankcase, reducing the risk of oil leaks and protecting vital engine parts. Manufactured to meet or exceed OEM standards, the Rein Crank Case Breather Pipe guarantees a perfect fit and long-lasting durability. Available through Turner Motorsport, this pipe is the ideal solution for BMW owners looking to restore or upgrade their engine’s ventilation system.

  • Designed for BMW models to ensure perfect fit and compatibility
  • Prevents crankcase pressure build-up, reducing the risk of oil leaks
  • Protects engine components from damage due to excess pressure
  • Made from high-quality, durable materials for long-lasting performance
  • Direct-fit replacement for easy and hassle-free installation
  • Meets or exceeds OEM specifications for reliable engine performance

Upgrade your BMW’s engine ventilation system with the Rein Crank Case Breather Pipe, ensuring smooth performance and protecting against costly repairs.

Show More Show Less

Genuine BMW - Corporate Logo
T#:13028
Part#: 11617533399
In Stock
2% off MSRP $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up
GENUINE BMW CONNECTING LINE:111060

URO Crankcase Vent Hose - 11157522931
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:26171673
Part#: 11157522931
In Stock
$ 39.79 USD
Free Shipping on orders $49 and up

Connecting the cyclone oil separator to the engine valve cover, this hose is crucial for maintaining optimal engine performance. Over time, exposure to heat from engine components can cause the plastic hose to become brittle, resulting in cracks, tears, or splits. These issues can lead to vacuum and oil leaks, triggering a check engine light.

  • High-quality replacement for BMW crankcase vent hose
  • Ensures optimal engine performance
  • Resistant to heat and wear
  • Helps prevent vacuum and oil leaks
  • Easy to install
Show More Show Less
Bav Auto Crank Case Ventilation Valve - E31 E38 E39 M62 4.4L ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bavarian Autosport - Corporate Logo
T#:640206
Part#: 11617501563
In Stock
Sale - Save 30% $ 47.99

This product was last offered at the strikethrough price on
11-07-2026

$ 33.59 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 47.99

This product was last offered at the strikethrough price on
11-07-2026

$ 33.59 USD
Free Shipping on orders $49 and up
An integral part of the emissions system, the PCV valve lets the crankcase breathe. This allows proper intake and exhaust flow, resulting in proper running and operation. When the crankcase vent valve fails it can cause excessive oil consumption, engine fault codes, and poor idle. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less

Oil Separator Valve
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bremmen Parts - Corporate Logo
T#:8677203
Part#: 11617531423
In Stock
Sale - Save 4% $ 69.99

This product was last offered at the strikethrough price on
11-07-2026

$ 67.20 USD
Free Shipping on orders $49 and up
Sale - Save 4%
$ 69.99

This product was last offered at the strikethrough price on
11-07-2026

$ 67.20 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:6683
Part#: 11151406952
Ships in 1-2 days
2% off MSRP $ 53.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 53.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up


Genuine BMW Vent Hose - Zyl. 1-4
This item fits the following BMW Chassis:
E39 M5,E39

Fits BMW Engines including:
S62


Genuine BMW - Corporate Logo
T#:32308
Part#: 11157843150
In Stock
4% off MSRP $ 108.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 108.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping on orders $49 and up


Genuine BMW Vent Hose - Zyl. 1-4
This item fits the following BMW Chassis:
F06,F10,F12,F13

Fits BMW Engines including:
S63N


Billet Check Valve - 10 Barb
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:597641
Part#: VTT-CHECK-2
Ships in 3 Business Days
$ 36.99 USD
Free Shipping
$ 36.99 USD
Free Shipping
Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!
Engine Crankcase Breather Element
5X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Hengst - Corporate Logo
T#:35795496
Part#: 11617533400
In Stock
Sale - Save 10% $ 41.99

This product was last offered at the strikethrough price on
11-14-2026

$ 37.79 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 41.99

This product was last offered at the strikethrough price on
11-14-2026

$ 37.79 USD
Free Shipping on orders $49 and up
Commonly referred to as the "oil separator" or PCV URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts.
Show More Show Less
Genuine BMW - Corporate Logo
T#:174249
Part#: 11157646087
In Stock
6% off MSRP $ 110.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Limited Qty Sale
Free Shipping
6% off MSRP
$ 110.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Limited Qty Sale
Free Shipping

Directs the gases from the PCV system back to the intake.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Connecting Line - Zyl 5-8
This item fits the following BMW Chassis:
E71,F01,F02,F10,F12,F13

Fits BMW Engines including:
N63

Show More Show Less


Oil Separator kit - N63
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:56291074
Part#: 11158636540KT2
In Stock
New Item
$ 442.99 USD
Free Shipping on orders $49 and up
If your BMW is burning oil, showing unmetered air faults, or suffering from degraded throttle response, a compromised breather system is usually the culprit. The N63 Crankcase Breather Package pairs Genuine BMW oil separators with OE tier Rein connecting pipes. Designed to restore factory level oil separation and sealed vacuum integrity across both cylinder banks
Show More Show Less
Bremmen Crankcase Ventilation Connecting Pipe - Cylinders 5-8 - E70/1...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bremmen Parts - Corporate Logo
T#:640153
Part#: 11157646087
In Stock
Sale - Save 30% $ 50.99

This product was last offered at the strikethrough price on
11-07-2026

$ 35.69 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 50.99

This product was last offered at the strikethrough price on
11-07-2026

$ 35.69 USD
Free Shipping on orders $49 and up
Connects to the valve cover over cylinders 5-8. These pipes tend to crack after become brittle from numerous heating and cooling cycles. If this happens, Bremmen pipes are a perfect replacement to restore a tight seal and prevent any check engine codes.
Show More Show Less
Genuine BMW - Corporate Logo
T#:216971
Part#: 11158647299
Ships in 1-2 days
4% off MSRP $ 223.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 213.99 USD
Free Shipping
4% off MSRP
$ 223.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 213.99 USD
Free Shipping
Genuine Bmw Connecting Line - 11158647299

Genuine BMW - Corporate Logo
T#:22212
Part#: 11157537701
Ships in 1-2 days
13% off MSRP $ 63.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.74 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 63.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.74 USD
Free Shipping on orders $49 and up


Genuine BMW Extraction Line -
This item fits the following BMW Chassis:
E85,E86,E90

Fits BMW Engines including:
N52


ECS Tuning Baffled Oil Catch Can - 8oz
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
ECS - Corporate Logo
T#:13496655
Part#: 003779ECS05-02
In Stock
Sale - Save 10% $ 238.99

This product was last offered at the strikethrough price on
11-07-2026

$ 215.09 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 238.99

This product was last offered at the strikethrough price on
11-07-2026

$ 215.09 USD
Free Shipping on orders $49 and up
Upgrade Your BMW with ECS Baffled Oil Catch Can

Modern emission regulations require a closed PCV/Breather system for cleaner operation. However, inefficient oil particle capture can lead to excessive oil vapor ingestion, causing carbon buildup, reduced performance, and fuel economy. ECS Tuning's updated ECS Baffled Oil Catch Can, now with an easy-to-empty 1/4" drain fitting, is engineered to collect toxic blow-by gases, minimize carbon deposits, and reduce oil contamination within engine oil. Recirculating oil vapor ensures emissions compliance without venting to the atmosphere.

  • Key Features:
  • Highly Efficient Oil Separator: Strategically positioned 4 chamber baffle system maximizes oil/air separation and minimizes oil droplets in the intake tract.
  • Integrated Dipstick: Knurled and black anodized oil dipstick simplifies oil volume inspection.
  • Reservoir: Available in 6oz or 8oz capacity with a 1/4" NPT drain plug fitting.
  • Serviceable: Easily removable baffle plates and drain plug for cleaning.
  • Easy/Customizable Installation: Combine with the ECS Universal Bracket Kit for simplified installation and adjustable mounting locations.
  • Leak-Free Fittings: Machined -10AN ORB (O-Ring Boss) fittings available for secure connections (fittings sold separately).
Show More Show Less
Genuine BMW - Corporate Logo
T#:11946
Part#: 11157553949
Ships in 1-2 days
4% off MSRP $ 89.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.92 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 89.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.92 USD
Free Shipping on orders $49 and up
This hose directs the oil & combustion vapors from the valve cover and directs them to the intake manifold where they are put through combustion again in order to reduce emissions. When installing one of our N54 Oil Catch Cans the connections on this hose will often break. We recommend replacing this hose at the same time as your catch can.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Oil Separator Vent Hose
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bremmen Parts - Corporate Logo
T#:33746535
Part#: 11617559530
In Stock
Sale - Save 30% $ 43.99

This product was last offered at the strikethrough price on
11-07-2026

$ 30.79 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 43.99

This product was last offered at the strikethrough price on
11-07-2026

$ 30.79 USD
Free Shipping on orders $49 and up
Rein - Corporate Logo
T#:591596
Part#: 11157575641
In Stock
$ 44.99 USD
Free Shipping on orders $49 and up
Replace your damaged crank vent pipe

Genuine BMW - Corporate Logo
T#:37159
Part#: 11667575774
Ships in 1-2 days
4% off MSRP $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD
Free Shipping on orders $49 and up


Genuine BMW Vacuum Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW - Corporate Logo
T#:12911
Part#: 11157831311
Ships in 1-2 days
2% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD
Free Shipping on orders $49 and up
This hose directs the oil & combustion vapors from the valve cover and directs them to the intake manifold where they are put through combustion again in order to reduce emissions. We recommend replacing this hose when replacing the oil separator #11157840446.

This item fits the following BMWs:
2001-2004 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
Show More Show Less
Rein - Corporate Logo
T#:591595
Part#: 11157575640
In Stock
$ 42.99

This product was last offered at the strikethrough price on
11-13-2026

$ 42.49 USD
Free Shipping on orders $49 and up
$ 42.49 USD
Free Shipping on orders $49 and up
Replace your damaged crank vent pipe
Genuine BMW - Corporate Logo
T#:348236
Part#: 11617504536
In Stock
2% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD
Free Shipping on orders $49 and up

Part of the vacuum and emissions system that runs from the intake manifold back to the connecting hose.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Fits the following BMW's:
E46 M52 (from 01/2000) and M54
E39 M52 (from 01/2000) and M54
E53 M54
E60 M54
E83 M54
Z3 M52 (up to 01/2000 for 2.3L and from 01/2000 for 2.8L) and M54
Z4 M54

Show More Show Less


Rein - Corporate Logo
T#:402018
Part#: 11157559528
In Stock
$ 48.99

This product was last offered at the strikethrough price on
10-22-2026

$ 41.69 USD
Free Shipping on orders $49 and up
$ 41.69 USD
Free Shipping on orders $49 and up
Over time this hose can become clogged and blocked up causing running problems. This is a direct factory replacement for the PCV hose.
Intake Manifold Cover (PCV)
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:373047
Part#: 11617501562
Ships in 2 Business Days
$ 55.99 USD
Free Shipping on orders $49 and up
An integral part of the emissions system, the PVC valve lets the crank case breathe. This allows proper intake and exhaust flow, resulting in proper running and operation. Often split from underhood heat and age, this vents excess oil into the engine compartment. Replace it now.
Show More Show Less
Rein - Corporate Logo
T#:378292
Part#: 11617504535
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
Runs from the top of the oil separator up to intake manifold.

Rein - Corporate Logo
T#:17804807
Part#: 11157522931
In Stock
$ 44.99

This product was last offered at the strikethrough price on
10-20-2026

$ 38.89 USD
Free Shipping on orders $49 and up
$ 38.89 USD
Free Shipping on orders $49 and up
Manufactured with high-quality materials to withstand heat, dirt, oil, and other debris.

Genuine BMW - Corporate Logo
T#:6617
Part#: 11127547058
Ships in 1-2 days
1% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 123.99 USD
Free Shipping
1% off MSRP
$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 123.99 USD
Free Shipping


Genuine BMW Repair Kit, Pressure Regulating Valve
This item fits the following BMW Chassis:
E53 48IS,E53 X5,E63,E65,E70 X5 X5

Fits BMW Engines including:
N62,N62N

Show More Show Less
URO Crankcase Ventilation Return Hose - 11157567801
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:26171675
Part#: 11157567801
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up

For your BMW's optimal performance, ensure the functionality of the hose connecting the oil dipstick to the crankcase vent valve. Positioned below the intake manifold, this hose is susceptible to clogging with oil film and condensation, leading to potential failure over time. Cracks and swelling in old hoses can result in oil and vacuum leaks, compromising engine performance.

  • Essential component for BMW engine functionality
  • Prevents clogging and potential hose failure
  • Minimizes oil and vacuum leaks
  • Convenient replacement when replacing crankcase vent valve
Show More Show Less

Rein - Corporate Logo
T#:7968540
Part#: 11157501567
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
This crank case vent valve (CCV) / oil separator / PCV valve helps to trap oil from the crank case. If this unit becomes plugged or develops a leak it can lead to rough idle or driveability issues. This item fits the following BMWs: 1992-1998 E36 BMW 318i 318is 318ti 318ic 1997-2002 Z3 BMW Z3 1.9
Show More Show Less
Flapper Delete Fitting - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:557962
Part#: VTT-FLAPPER-DELE
Ships on Dec 2, 2026
$ 57.99 USD
Free Shipping
$ 57.99 USD
Free Shipping

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

Genuine BMW - Corporate Logo
T#:367705
Part#: 11611432559
Ships in 1-2 days
$ 47.99 USD
Free Shipping on orders $49 and up
$ 47.99 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:13027
Part#: 11617531423
Ships in 1-2 days
6% off MSRP $ 148.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 139.99 USD
Free Shipping
6% off MSRP
$ 148.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 139.99 USD
Free Shipping
The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or solid oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create a oil sludge condition that is impossible to clear. Thankfully, the CCV is replaceable on the early N52 engines (2006) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2012 E91 BMW 325xi - Wagon
2006-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
Show More Show Less
Genuine BMW - Corporate Logo
T#:2885
Part#: 11157532628
Ships in 1-2 days
3% off MSRP $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.99 USD
Free Shipping on orders $49 and up
This is the updated hose that goes from the Crankcase Oil Separator Valve to the oil dipstick tube. This tube tends to get plugged with oil sludge and becomes brittle and cracks. It fits X5 3.0i.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2000-2006 E53 BMW X5 3.0i
Show More Show Less
Genuine BMW - Corporate Logo
T#:340670
Part#: 11157848155KT
Ships in 1-2 days
$ 1,085.99 USD
Free Shipping
$ 1,085.99 USD
Free Shipping
The crankcase breather, or also commonly called the PCV or oil separator, allows the crankcase to expel air without losing any oil. When failing, the PCV can cause misfires and a rough running commonly experienced at idle. This kit allows you to service your breather system and keep your vehicle's emissions system in top shape and running great.
Show More Show Less


Genuine BMW - Corporate Logo
T#:19163
Part#: 11151718642
Ships in 1-2 days
$ 34.99 USD
Free Shipping on orders $49 and up


Genuine BMW Volume Control Valve - Zyl.7-12

Fits BMW Engines including:
M70,S70

Genuine BMW - Corporate Logo
T#:367818
Part#: 13411710793
Ships in 1-2 days
3% off MSRP $ 108.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 105.89 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 108.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 105.89 USD
Free Shipping on orders $49 and up