Find Parts That Fit Your Vehicle

Oiling System

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:

Iwis - Corporate Logo
T#:99
Part#: 11411716988
Ships in 1 Business Day
$ 29.99

This product was last offered at the strikethrough price on
05-07-2026

$ 28.99 USD
Free Shipping on orders $49 and up
$ 28.99 USD
Free Shipping on orders $49 and up
E30 M3 Replacement Oil Pump Chain. Superseded to 11417577656
Iwis - Corporate Logo
T#:377366
Part#: 11417576916
Ships in 1 Business Day
$ 28.99 USD
Free Shipping on orders $49 and up
Chain that drives the oil pump
URO Oil Pan
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:640378
Part#: 11131432703
Ships in 1 Business Day
$ 357.99 USD
Free Shipping on orders $49 and up
Replace your cracked or damaged oil pan with this URO part that fits models with the M52tu, M54 and M56 engines. The BMW aluminum oil pans can be damaged by road debris or even by putting the drain pan bolt in incorrectly.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
2003-2005 E85 BMW Z4 2.5i Z4 3.0i -M54
Show More Show Less

URO - Corporate Logo
T#:33446276
Part#: 11427573212
Ships in 1 Business Day
$ 143.99 USD
Free Shipping on orders $49 and up
An engine oil thermostat allows oil to bypassing the cooler until the oil has reached its minimum operating temperature.

Burger Motorsports - Corporate Logo
T#:5567061
Part#: OCCN55-235COUPE
Ships in 1 Business Day
$ 199.00 USD
Free Shipping on orders $49 and up
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less
Engine Oil Pan Gasket - E82 E9X E60 E83 E70 Z4
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:24145944
Part#: 11137548031
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up
High-quality replacement gasket for fixing oil pan gasket leaks.

Oil Filter Cap
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:381080
Part#: 11427615389
In Stock
$ 31.99

This product was last offered at the strikethrough price on
05-07-2026

$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
Secures the oil filter to the filter housing
Mahle - Corporate Logo
T#:581126
Part#: OX1773D
Ships in 1 Business Day
$ 24.78 USD
Free Shipping on orders $49 and up
High quality filter

AFE - Corporate Logo
T#:557622
Part#: 44-LF022-MB
In Stock
$ 54.00 USD
Free Shipping on orders $49 and up
Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.
Show More Show Less

Oil Filter Housing Lid
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:591694
Part#: 11421736674
Ships in 1 Business Day
$ 24.99 USD
Free Shipping on orders $49 and up
Does not include sealing o-ring
Weistec - Corporate Logo
T#:22690730
Part#: 01-555-02060-4
Ships in 1 Business Day
$ 179.00 USD
Free Shipping on orders $49 and up
Direct replacement/bolt in for the S55 engines. CNC machined 6061 aluminum Anodized in Red
NM Engineering - Corporate Logo
T#:26305130
Part#: NM.498855
Ships in 2 Business Days
$ 419.00

This product was last offered at the strikethrough price on
09-22-2026

$ 398.99 USD
Free Shipping on orders $49 and up
$ 398.99 USD
Free Shipping on orders $49 and up

Upgrade your Mini's performance and durability with the NM Engineering Catch Tank. Machined from billet 6061 aluminum alloy and anodized for added surface durability, this catch tank effectively traps oil and moisture from blow-by gas, preventing carbon and sludge buildup in crucial engine components. Enjoy these benefits:

  • Billet aluminum construction ensures durability.
  • Prevents carbon and sludge buildup in the turbo, intake system, and engine.
  • Easy disassembly for thorough cleaning and servicing.
  • Patent Pending Locking Clip system for secure installation.
  • Includes block-off plug for rear PCV port.
  • Compatible with N14 engine applications.
Show More Show Less


Sneed4Speed - Corporate Logo
T#:19627055
Part#: NS14OPK
Ships in 1 Business Day
$ 584.99 USD
Free Shipping on orders $49 and up
Mishimoto - Corporate Logo
T#:15544955
Part#: MMOC-G80-21SL
In Stock at Vendor
$ 776.99 USD
Free Shipping on orders $49 and up
Keep your 2021+ BMW M3/M4 cool and collected with the Mishimoto 2021+ BMW M3/M4 performance oil cooler. Much like their predecessors, the G8X M3 and M4 were designed with efficiency in mind. This can be a double-edged sword, as the optimally arranged engine bay has components placed in precarious positions. Most notably, the oil cooler is placed on the undercarriage, parallel to the road's surface. This placement increases air flow and uses aerodynamics to pull air through the core, but it also makes the stock cooler vulnerable to scrapes, bumps, and other road hazards. With this in mind, the engineers at Mishimoto set out to design a robust G8X oil cooler to keep your M3 or M4 running cool on and off the track. We started by swapping the stock tube-and-fin cooler for a bar-and-plate with CNC-machined end tanks. Our cooler boasts a 35.7-percent thicker core and a 41-percent increase in core volume for superior cooling efficiency. Our cooler fits directly in place of the stock unit and retains the stock seals and bash guards for optimal airflow and additional protection. The Mishimoto performance oil cooler for the 2021+ BMW G8X M3/M4 includes everything needed for installation and, as with all Mishimoto products, it's protected by the Mishimoto Lifetime Warranty for a lifetime of protection and cooling. Product Features: Direct fit for the 2021+ BMW G8X M3/M4 Full aluminum TIG-welded construction 41-percent increase in core volume and 35.7-percent thicker core than stock for improved cooling efficiency Robust bar-and-plate core provides superior pressure tolerance and durability Retains stock seals for optimal air flow from fresh air ducts Retains bash guards to protect cooler from bumps and curbs Silver powder coated finish for maximum corrosion resistance No cutting or modifications required Includes everything needed for installation Mishimoto Lifetime Warranty
Show More Show Less
Engine Oil Thermostat
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:15445596
Part#: 11427520214
Ships in 1 Business Day
$ 175.99 USD
Free Shipping on orders $49 and up
If you are looking to retrofit an oil cooler to your BMW, this adapter is absolutely necessary.

Oil Level Sensor
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:37858361
Part#: 12611406609
Ships in 1 Business Day
$ 124.99 USD
Free Shipping on orders $49 and up
Is your oil level light on even though the oil level is fine? The issue may be a faulty oil level sensor, which monitors your engine’s oil level.

Rein Oil Pan Kit
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:17738376
Part#: 11137618512
Ships in 3 Business Days
$ 181.99 USD
Free Shipping on orders $49 and up
This OE quality kit includes the engine oil pan and gasket.
Mishimoto - Corporate Logo
T#:2839826
Part#: MMSBH-F80-15
In Stock at Vendor
$ 456.99 USD
Free Shipping on orders $49 and up
The F8X M3/4 are equipped with a set of hardlines connecting the oil pump tot he oil cooler, these corrode overtime and start to fail causing oil leaks leading and improper oiling of your engine. This Mishimoto kit includes both lines and all needed brackets and hardware for a OE like installation, Features Direct replacement for OE hard lines -10AN fittings and adapters for use with OE oil cooler Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7593089
Part#: 11619
In Stock at Vendor
$ 130.00 USD
Free Shipping on orders $49 and up
$ 130.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. Ten gated holes control oil slosh in the sump. A must have for all track cars. **Note: welding is required to install. Photos of installed baffle for reference.
Show More Show Less
Heat Exchanger
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:593079
Part#: 17207500754
Ships in 1 Business Day
$ 103.99 USD
Free Shipping on orders $49 and up
The heat exchanger keeps your engine oil temperature at a safe level. Without it, oil temperatures could skyrocket causing shearing and potentially internal engine component failure.

Advanced Auto Fabrication - Corporate Logo
T#:7624656
Part#: 116184
Ships in 3 Business Days
$ 230.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.
Show More Show Less

Oil Cooler Pipe - Supply
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:18468293
Part#: 17227560979
In Stock
$ 100.99 USD
Free Shipping on orders $49 and up
Burger Motorsports - Corporate Logo
T#:21045512
Part#: BDCC-N54-535
Ships on Oct 15, 2026
$ 399.00 USD
Free Shipping on orders $49 and up
It's no secret that the N54 BMW turbo motors suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The BMS N54 oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor / ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoe horned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Vacuum Side The BMS vacuum side N54 OCC works in conjunction with the world-famous boost side N54 oil catch can to prevent engine oil and PCV gunk from coating your intake valves and hurting engine efficiency under engine vacuum operation. Our boost side OCC separates oil traveling through the PCV while the engine is operating under boost pressure (e.g. heavy throttle) and our vacuum side OCC separates oil traveling through the PCV while the engine is operating under vacuum (idle and low throttle). When used together they provide the ultimate protection keeping oil from coating your intake ports and valves during all phases of engine operation! The unique PCV adapter design does not require you to permanently cap/plug your PCV holes! Includes a high performance check valve that attaches directly to the vacuum source eliminating boost leaks within the system and also includes quick connect fittings and 3/8” hose for quick, easy, and clean installation. The full vacuum side kit includes a BMS double baffle OCC which mounts on the strut brace right next to your BMS boost side OCC for a clean look and easy service. The full kit also includes our BOV adapter providing an extra 1/8" NPT vacuum port source. Note a BOV is not required to run this kit. This kit eliminates the need for a separate RB PCV or BMS PCV. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum
Show More Show Less
Future Classic - Corporate Logo
T#:28038209
Part#: FC-E9X-S65-OFC
Ships in 3 Business Days
Starting at $ 240.00 USD
Free Shipping on orders $49 and up
Starting at $ 240.00 USD
Free Shipping on orders $49 and up

The factory E9X oil filter housing cap is made of plastic which, by nature of the material, dissipates heat poorly and is prone to failure over repeated heat cycles. By contrast to the OEM unit, our cap is constructed from 6061-T6 aircraft-grade aluminum which promises two functional benefits: greater longevity and cooler running throughout its life cycle.

So too will the oil itself benefit: By getting your oil up to temperature quickly, but tangentially evacuating excess heat, the aluminum oil filter housing cap will help your fluid operate within its working range while effectively preventing thermal breakdown.

Each cap has been meticulously manufactured on a DMG Mori 5-Axis with specially sourced tooling to achieve some of the cap's intricate details. Anodized, the housing cap’s details are happily preserved but offer up a valuable way for an enthusiast to express their individuality. Four colors are available at launch to maximize choice: Ferrari Red, Royal Blue, Hard Coat Clear, and Hard Coat Black.

Appropriately, our latest livery box echoes a Gulf theme—echoing our motorsport intent and ties to the culture that has inspired us to create from the beginning.

Product Details:

Compatible with S65-equipped BMW vehicles Plug-and-play replacement for OE plastic cap CNC precision machined from 6061-T6 aerospace aluminum Improves heat dissipation and increases cap longevity Four anodizing options: Ferrari Red, Royal Blue, Hard Coat Clear, & Hard Coat Black Proudly made in USA

Show More Show Less


Genuine BMW - Corporate Logo
T#:119041
Part#: 51747200790
Ships in 1 day
4% off MSRP $ 182.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 182.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD
Free Shipping on orders $49 and up


Genuine BMW Air Duct, Engine Oil Cooler, Front Right -
This item fits the following BMW Chassis:
F10

Genuine MINI - Corporate Logo
T#:207707
Part#: 12518626764
Ships in 1 day
7% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD
Free Shipping on orders $49 and up
Genuine BMW Adapter For Oil Pump Solenoi - 12518626764
Fits BMW Engines including:
N18

Genuine BMW - Corporate Logo
T#:35411
Part#: 11427598003
Ships in 1 day
4% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD
Free Shipping on orders $49 and up
Genuine BMW Oil Spraying Nozzle. These sometimes break and fall into the oil pan.

Genuine BMW - Corporate Logo
T#:35364
Part#: 11427537294
Ships in 1 day
5% off MSRP $ 39.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 39.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD
Free Shipping on orders $49 and up


Genuine BMW Cover -
This item fits the following BMW Chassis:
E82,E83 X3,E85,E86,F10,F25 X3

Fits BMW Engines including:
N51,N51,N52,N52N


Genuine BMW - Corporate Logo
T#:34934
Part#: 11411733962
Ships in 1 day
2% off MSRP $ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD
Free Shipping on orders $49 and up


Genuine BMW Sprocket -
This item fits the following BMW Chassis:
E34,E38,E39,E53 X5

Fits BMW Engines including:
M60,M62

Genuine BMW - Corporate Logo
T#:6605
Part#: 11121743294
Ships in 9 Business Days
8% off MSRP $ 39.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 39.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD
Free Shipping on orders $49 and up


GENUINE BMW ENGINE COVER LID 11121743294

We also offer a lower priced aftermarket version of this Oil filler cap 11127509328


Fits BMW Engines including:
M42,M44,M50,M52,M54,S50

Show More Show Less

Genuine BMW - Corporate Logo
T#:35051
Part#: 11417576917
Ships in 1 day
2% off MSRP $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.99 USD
Free Shipping on orders $49 and up


Genuine BMW Chain -
This item fits the following BMW Chassis:
E34,E38,E39

Fits BMW Engines including:
M60,M62

Genuine BMW - Corporate Logo
T#:201025
Part#: 11418600425
Ships in 1 day
3% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD
Free Shipping on orders $49 and up


Genuine BMW Sprocket -
This item fits the following BMW Chassis:
i12 i8


Genuine BMW - Corporate Logo
T#:6927
Part#: 11531306850
Ships in 1 day
$ 32.99 USD
Free Shipping on orders $49 and up
GENUINE BMW ENGINE RETURN PIPE 11531306850.--

This item fits the following BMWs:
BMW M Series - M5, M6

--. Fits BMW Engines including:
S38


Genuine BMW - Corporate Logo
T#:190636
Part#: 11428507685
Ships in 1 day
6% off MSRP $ 48.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 48.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Free Shipping on orders $49 and up


Genuine BMW Oil Filter Cover -
This item fits the following BMW Chassis:
F15,F25 X3,F30,F31

Fits BMW Engines including:
N57N

Genuine MINI - Corporate Logo
T#:31474
Part#: 11127572848
Ships in 1 day
8% off MSRP $ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.99 USD
Free Shipping on orders $49 and up
Genuine MINI COVER LID
Fits BMW Engines including:
N14

Genuine BMW - Corporate Logo
T#:15632
Part#: 32411141655
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up


Genuine BMW Bracket, Oil Carrier
This item fits the following BMW Chassis:
E36 M3,E36



Genuine BMW - Corporate Logo
T#:14122760
Part#: 11418482270
Ships in 1 day
13% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:45924
Part#: 17117542517
Ships in 1 day
$ 30.99 USD
Free Shipping on orders $49 and up


Genuine BMW Lower Cooler Bracket
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63

Fits BMW Engines including:
M54,N52,N52N,N54,N62,S85,N62N

Show More Show Less
Genuine BMW - Corporate Logo
T#:528048
Part#: 11438516508
Ships in 5 Business Days
5% off MSRP $ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:35266
Part#: 11421711075
Ships in 1 day
10% off MSRP $ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Free Shipping on orders $49 and up


Genuine BMW Oil Filter Cover
This item fits the following BMW Chassis:
E36 M3,E46 M3,E85 Z4M,E30,E34,E36,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
M30,M42,M50,S50,S52,S54

Show More Show Less

Genuine BMW - Corporate Logo
T#:35504
Part#: 11431309187
Ships in 2 Business Days
4% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 117.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 117.99 USD
Free Shipping on orders $49 and up


Genuine BMW Dipstick
This item fits the following BMW Chassis:
E30 M3,E30

Fits BMW Engines including:
S14

Genuine MINI - Corporate Logo
T#:31398
Part#: 11127542116
Ships in 1 day
6% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
This is a Genuine MINI oil filler cap that fits into the opening on the engine cover for cars with the N12 and N16 engines

This item fits the following BMWs:
2007+ R56 MINI MINI Cooper, MINI Cooper S
2007+ R55 MINI MINI Cooper Clubman
2007+ R57 MINI MINI Cooper Convertible
2011+ R60 MINI MINI Cooper Countryman
Show More Show Less

Genuine BMW - Corporate Logo
T#:19141
Part#: 11421745392
Ships in 1 day
4% off MSRP $ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD
Free Shipping on orders $49 and up


Genuine BMW Supporting Dome -
This item fits the following BMW Chassis:
E34,E38

Fits BMW Engines including:
M60,M70,M73,S70

Genuine BMW - Corporate Logo
T#:199542
Part#: 11417603574
In Stock
2% off MSRP $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD
Free Shipping on orders $49 and up


Genuine BMW Suction Pipe -
This item fits the following BMW Chassis:
F10,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Genuine BMW - Corporate Logo
T#:35576
Part#: 11437536198
Ships in 1 day
2% off MSRP $ 88.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 88.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping on orders $49 and up


Genuine BMW Guide Tube, Top
This item fits the following BMW Chassis:
E53 48IS,E53 X5

Fits BMW Engines including:
N62


Engine Oil Cooler
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:33013819
Part#: 11428585236
Ships in 1 day
$ 80.99

This product was last offered at the strikethrough price on
05-07-2026

$ 78.99 USD
Free Shipping on orders $49 and up
$ 78.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:19057
Part#: 11411405847
Ships in 1 day
3% off MSRP $ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD
Free Shipping on orders $49 and up


Genuine BMW Bracket Oil Pipe
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Genuine BMW - Corporate Logo
T#:622073
Part#: 11428580414
Ships in 1 day
4% off MSRP $ 804.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 768.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 804.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 768.99 USD
Free Shipping on orders $49 and up


Genuine BMW - Corporate Logo
T#:31635
Part#: 11127837024
Ships in 1 day
2% off MSRP $ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up


Genuine BMW Gasket
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Genuine BMW - Corporate Logo
T#:19325
Part#: 11127500568
Ships in 1 day
7% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 51.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 51.99 USD
Free Shipping on orders $49 and up
This Genuine BMW oil filler cap comes inscribed with "BMW Castrol" and is a direct replacement for many late model BMW's.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2003-2005 E46 BMW 325i 325ci - Only for M56 engine
2006-2011 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2012 E91 BMW 325xi - Wagon
2005-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
Show More Show Less