Oiling System

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice. 

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

• 1x Aluminum Crank Bolt Capture
• 8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54 

Keep your BMW and MINI in optimal condition with the Turner Motorsport Full Housing Unit, designed for the replacement of units experiencing leaks, cracks, or internal damage. This comprehensive unit includes the oil filter set, even though it's not shown, ensuring a complete replacement solution. Mounted on the side of the engine, this housing unit comes with essential components, providing a hassle-free replacement process.

• Full housing unit for replacement
• Addresses leaks, cracks, or internal damage
• Includes oil filter set (not shown)
• Hassle-free mounting on the side of the engine
• Components included: Oil Filter Cover/Lid, oil filter elements, Oil Filter lid O-ring, Main gasket to the back of the engine, heat exchanger
• OES supplier for quality assurance

MINI R56 Oil Pump Assembly ensures optimal engine lubrication and performance for your MINI. This high-quality oil pump is engineered to maintain proper oil flow, preventing engine wear and extending the life of critical components. Designed to meet or exceed OEM specifications, it provides reliable performance and durability. Whether you're replacing a worn-out pump or upgrading your engine, this oil pump assembly is essential for keeping your MINI running smoothly.

• Optimal lubrication: Ensures proper oil flow to critical engine components.
• High-quality construction: Built to meet or exceed OEM specifications.
• Enhanced engine life: Helps prevent engine wear and prolongs component life.
• Reliable performance: Designed for durability and consistent operation.
• Perfect fitment: Specifically designed for the MINI R56.

MINI F56 Oil Pan - 11138590017 provides a reliable replacement solution for damaged or leaking oil pans caused by road debris and potholes. Constructed from lightweight metal, this oil pan offers durability and effective protection for the engine. Note that it does not include an oil drain plug and washer, so be sure to purchase these separately along with a new gasket and screws for a complete installation.

• Made from lightweight metal for enhanced durability and protection
• Direct replacement for damaged or leaking oil pans
• Does not include an oil drain plug or washer; these must be purchased separately
• Ideal for maintaining optimal engine performance and preventing leaks
• OES (Original Equipment Supplier) quality for assured fit and reliability

Upgrade your Mini's engine with the Oil Filter Housing W/ Cap for N14 1.6L Engine. This full housing unit is designed for replacing a unit that has experienced leaks, cracks, or internal damage, ensuring optimal engine performance and longevity. It includes an oil filter set for added convenience, though the specific brand is not shown. Easily mountable to the side of the engine, this housing unit offers a hassle-free installation process. For best results, it is recommended to use your preferred filter brand with this aftermarket housing unit.

• Complete oil filter housing unit for N14 1.6L Engine
• Ideal replacement for units with leaks, cracks, or internal damage
• Includes oil filter set for added convenience
• Easy mounting to the side of the engine
• Compatible with various filter brands for customization

BMW N54 N55 Heat Exchanger - 17217536929 is designed to maintain optimal transmission oil temperatures, ensuring reliable performance and longevity for your BMW. This high-quality heat exchanger effectively manages heat, preventing overheating and potential damage to the transmission system.

• Optimal Temperature Control: Keeps transmission oil at a safe temperature, enhancing overall performance.
• Durable Construction: Built to withstand high temperatures and demanding driving conditions.
• Improved Reliability: Helps prevent transmission overheating, which can lead to costly repairs.
• Direct Replacement: Engineered to fit seamlessly with BMW N54 and N55 engines.

Turner Motorsport's BMW N54 N55 Heat Exchanger - 17217536929 is an essential component for maintaining the efficiency and durability of your transmission system.