Find Parts That Fit Your Vehicle

Oiling System

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:
Billet Oil Filter Cap
Billet Oil Filter Cap
Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
In Stock
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less
Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 (B58A) F22/23 F3X G01/02 G30
Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 ...
Burger Motorsports - Corporate Logo
T#:43378539
Part#: B58G1OFH
In Stock
$ 279.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 279.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.
BMS Oil Catch Can - S55
BMS Oil Catch Can - S55
Burger Motorsports - Corporate Logo
T#:38621421
Part#: BMS-OCC-S55
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Includes 18" NBT bung The S55 BMW turbo engine often faces oil control challenges, resulting in oil blow-by that contaminates the intercooler and charge piping, clogs intake valves and the VANOS system, lowers effective octane, and diminishes engine performance—especially at higher boost levels. The BMS Oil Catch Can provides the ultimate solution. Unlike generic catch cans that suffer from poor mounting, restrictive baffles, inadequate ventilation, or improper PCV integration, the BMS OCC is specifically engineered for turbo BMW applications. Key Features: ✅ CNC-machined precision construction—seamless design for a perfect fit and long-lasting durability ✅ Optimized hose diameter and flow rate—prevents crankcase pressure buildup ✅ Fully sealed PCV system—ensures no vapor leaks into the atmosphere ✅ Strategic mounting location—minimizes line length for efficient performance and a stealthy install ✅ Fast 20-minute installation—comes with all necessary hardware and is easily reversible ✅ Simple oil disposal—drain via the plug or removable base during oil changes Proudly made in the USA, the BMS Oil Catch Can delivers long-term engine protection while optimizing performance and reliability.
Show More Show Less
Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B58C/B58D) G20 G/22/23/26 G29 G05/06/07 G30
Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...
Burger Motorsports - Corporate Logo
T#:43378540
Part#: B58G2OFH
Ships on Nov 18, 2026
$ 279.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 279.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.
Improved Racing BMW Oil Cooler Thermostat (180F)
Improved Racing BMW Oil Cooler Thermostat (180F)
Burger Motorsports - Corporate Logo
T#:27171935
Part#: IRTHERM
Back Ordered
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). ​Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.
Show More Show Less
Billet Oil Filter Cap
Billet Oil Filter Cap
Burger Motorsports - Corporate Logo
T#:21045500
Part#: BMS-BOFC
In Stock
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA
Show More Show Less
Billet Oil Thermostat Lid
Billet Oil Thermostat Lid
Burger Motorsports - Corporate Logo
T#:21045480
Part#: BMS-TLID
Ships in 1 Business Day
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less
Blue Thermostat Caps (pair)
Blue Thermostat Caps (pair)
Burger Motorsports - Corporate Logo
T#:54139632
Part#: BMS-TCP-BLU
Ships in 1 Business Day
New Item
$ 29.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 29.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Convertible N55 3.0L
Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...
Burger Motorsports - Corporate Logo
T#:5567062
Part#: OCCN55-235VERT
Ships on Nov 18, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less
Dual BMS Turbo Double Baffled Oil Catch Can Kit - Vac & Boost Side - 535
Dual BMS Turbo Double Baffled Oil Catch Can Kit - Vac & Boost Side - ...
Burger Motorsports - Corporate Logo
T#:21045512
Part#: BDCC-N54-535
Ships on Nov 18, 2026
$ 399.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 399.00 USD
Free Shipping on orders $49 and up
Add to Wish List
It's no secret that the N54 BMW turbo motors suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The BMS N54 oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor / ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoe horned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Vacuum Side The BMS vacuum side N54 OCC works in conjunction with the world-famous boost side N54 oil catch can to prevent engine oil and PCV gunk from coating your intake valves and hurting engine efficiency under engine vacuum operation. Our boost side OCC separates oil traveling through the PCV while the engine is operating under boost pressure (e.g. heavy throttle) and our vacuum side OCC separates oil traveling through the PCV while the engine is operating under vacuum (idle and low throttle). When used together they provide the ultimate protection keeping oil from coating your intake ports and valves during all phases of engine operation! The unique PCV adapter design does not require you to permanently cap/plug your PCV holes! Includes a high performance check valve that attaches directly to the vacuum source eliminating boost leaks within the system and also includes quick connect fittings and 3/8” hose for quick, easy, and clean installation. The full vacuum side kit includes a BMS double baffle OCC which mounts on the strut brace right next to your BMS boost side OCC for a clean look and easy service. The full kit also includes our BOV adapter providing an extra 1/8" NPT vacuum port source. Note a BOV is not required to run this kit. This kit eliminates the need for a separate RB PCV or BMS PCV. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum
Show More Show Less
Burger Motorsports Turbo Double Baffle Oil Catch Can - F22 235i Coupe N55 3.0L
Burger Motorsports Turbo Double Baffle Oil Catch Can - F22 235i Coupe...
Burger Motorsports - Corporate Logo
T#:5567061
Part#: OCCN55-235COUPE
Ships in 1 Business Day
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Breather To -10AN Fitting - BMW S58 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...
Burger Motorsports - Corporate Logo
T#:46924978
Part#: S58OFBC-90F
Ships on Nov 18, 2026
$ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.
Show More Show Less
Oil Thermostat Caps
Oil Thermostat Caps
Burger Motorsports - Corporate Logo
T#:21045481
Part#: BMS-TCP
Ships in 1 Business Day
Starting at $ 29.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 29.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block Off Cap - BMW S58 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block...
Burger Motorsports - Corporate Logo
T#:46924975
Part#: S58OFBC-BO
Ships on Nov 18, 2026
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. A removable black block off cap is included to use the cap with no ventilation, but any custom ventilation solution using a -10ORB fitting can be used with this oil filler breather cap.
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Breather To -10AN Fitting - BMW Gen2 B58 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...
Burger Motorsports - Corporate Logo
T#:46924977
Part#: B58OFBC-90F
Back Ordered
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Breather To -10AN Fitting - BMW S68 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...
Burger Motorsports - Corporate Logo
T#:46924979
Part#: S68OFBC-90F
Back Ordered
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block Off Cap - BMW Gen2 B58 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block...
Burger Motorsports - Corporate Logo
T#:46924974
Part#: B58OFBC-BO
Back Ordered
$ 82.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 82.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. A removable black block off cap is included to use the cap with no ventilation, but any custom ventilation solution using a -10ORB fitting can be used with this oil filler breather cap.
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block Off Cap - BMW S68 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block...
Burger Motorsports - Corporate Logo
T#:46924976
Part#: S68OFBC-BO
Back Ordered
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. A removable black block off cap is included to use the cap with no ventilation, but any custom ventilation solution using a -10ORB fitting can be used with this oil filler breather cap.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping