For MINI Cooper and Cooper S models, achieving optimal rear grip is crucial, and the adjustable rear camber range of zero to negative four degrees proves beneficial. These fully assembled Sport Rear Camber Links come preset to the stock length, featuring greasable bushings for smooth operation. Adjusting the camber is simple: loosen the lock nuts and rotate the hex center to fine-tune the camber to your preference.

These links are engineered and tested to perform exceptionally well in both street and track environments. By using the stock length as your new baseline, the two tubular steel outer arms with a billet aluminum hex center offer versatility in camber settings. The polyurethane bushings, with zerk fittings at each end, ensure durability and functionality. Ideal for lowered MINIs, these Sport Camber Links correct excessive negative camber and provide the freedom to optimize your Mini's rear camber.

• Corrects excessive negative camber
• Links preset to stock length for ease
• Greasable bushings for smooth operation
• Ideal for lowered MINIs

MINI R55 to R59 Koni Shock Sport Series Kit 8241-1252LSport delivers exceptional performance for enthusiasts who demand superior handling and comfort. Koni's renowned Sport shock absorbers are engineered for drivers who seek enhanced road-holding capabilities without sacrificing ride quality. This kit is designed to elevate your MINI’s driving dynamics with advanced engineering and a commitment to durability.

• Sport 'Yellow' Shocks: Engineered for improved performance and handling.
• Externally Adjustable Twin-Tube Design: Allows for fine-tuning of damping settings to match driving conditions.
• Low Pressure Gas Design: Provides consistent performance and comfort.
• Complete Strut Set: Includes both front and rear shocks for a comprehensive upgrade.
• Durability and Quality: Backed by a limited lifetime warranty for long-term reliability.

Note: For the rear shocks, Koni-supplied sleeves are required for both factory and aftermarket strut mounts.

Forge introduces its Forge Adjustable Rear Tie Bars for various MINI models, developed and tested in the demanding Mini Challenge Race Series environment. Designed for road-going MINIs, including R50-R53, R55-R59, and R60/R61 models, these tie bars offer superior performance and durability.

• Tested in the Mini Challenge Race Series for proven reliability
• Enhances tire surface contact area for improved traction
• Reduces uneven tire wear for extended tire life
• Adjustable geometry allows for fine-tuning and faster lap times
• Eliminates tramlining feel and improves steering response
• Manufactured from high-quality high tensile steel for strength and durability
• Corrosion-resistant powder coating ensures longevity in all conditions
• Supplied with custom-made dirt ingress covers for added protection
• Fitted with Powerflex polyurethane bushes for high performance and long life
• Covered by Forge's industry-leading Lifetime warranty

Upgrade your Mini's performance with Forge Adjustable Rear Tie Bars, manufactured in the UK for optimal quality and reliability.

Upgrade your Mini's front top strut mounts with the K-MAC ultimate design. These mounts offer separate Camber and Caster adjustment, ensuring precise alignment even under load. Made from high-grade aircraft aluminum, they are durable and lightweight. With K-MAC's patented system, adjustments are quick and easy, allowing you to switch between Street and Race settings in just 30 seconds. The design also features heavy-duty centers encased in elastomer for extended life and minimal stack height.

• Separate Camber and Caster adjustment
• Quick and easy adjustments
• Made from aircraft grade 7075 aluminum
• Durable and lightweight construction
• Compatible with OEM diam springs or smaller coil overs

Location: Front 
Type: Street/Track, Stage 2 

KMAC camber/caster plates use a patented adjustment method designed for easy and rapid alignment adjustments. The KMAC design has a 'floating' inner camber plate, rather than slotted, to allow camber and caster to be adjusted together. To adjust, simply loosen the top three nuts on the strut tower and position the KMAC mount to match your desired alignment settings. The KMAC design allows more camber and caster adjustment because separate caster hardware is eliminated. While primarily designed to increase negative camber for track use these can also be used to fix alignment issues that cause uneven tire wear or unwanted handling behavior. 

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required. 

Fits the following Mini Chassis:
R55, R56, R57, R56, R59, R60, R61

New Bilstein Shocks from Turner Motorsport

Upgrade your vehicle's suspension with the new Bilstein shocks from Turner Motorsport. These yellow powder-coated shocks and struts are designed to enhance ride quality and driving characteristics, giving your Mini a legendary suspension experience.

Benefits:

• Revives ride quality and improves vehicle handling
• Designed for performance-minded automotive enthusiasts
• Provides unparalleled control and performance
• Compatible with lowering springs and upgraded sway bars
• Backed by Bilstein's warranty for defects in material and workmanship

The ECS MINI Coilover Line was designed with the daily driver in mind! Focused on improving the performance and aesthetics of your vehicle without forgetting comfort. With 32 levels of available damping and height adjustments tailored to each car, ECS coilovers are right in that sweet spot of firm and compliant while giving you an aggressive look and vastly improved handling.

The ECS Tuning Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

Spring Rates: Front is 6kg/mm, Rear is 6kg/mm

PERFORMANCE FEATURES:

32 levels of rebound damping adjustment
Adjustable front sway bar end links
Lowering Adjustment of: 1.5" - 4"
Heat treated, progressive rate coil springs.
Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs gives your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance
Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load
Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height

PRODUCT DESIGN:

Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity
Threaded portions are are zinc-coated for optimum corrosion protection against rain and salt (finish will vary between clear or black zinc coatings depending on availability)
Coil springs are powder-coated Reflex Silver Metallic finish for durability
Red anodized, billet aluminum spring seats with locking collars allow for quick, on the car, adjustability with the included spanner wrenches
Anodized adjustable sway bar end links with heavy duty bushings
Self-locking, zinc-coated flanged nuts used for shock & strut shaft pins
Zinc coated strut mount securing nuts included
Rear shock adjuster housings are black E-coated for durability
Zinc-coated lower spring perches
Integrated bump stops and dust boots