Find Parts That Fit Your Vehicle

Packaged by Turner BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Front & Rear Suspension Overhaul Kit - F10 M5
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:57014171
Part#: 31122284975KT2
Ships in 9 Business Days
New Item
$ 8,182.99 USD
$ 8,182.99 USD
Maintaining pure chassis feedback and high speed stability in the F10 M5 requires tight, uncompromised suspension geometry at all four corners. As high mileage control arm bushings deflect and ball joints wear down, the car loses its razor sharp turn in, predictable tracking under load, and firm rear axle hookup.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:21703006
Part#: T31122228461NCKT
Ships in 3 Business Days
Sale - Save 3% $ 494.99

This product was last offered at the strikethrough price on
05-03-2026

$ 479.69 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 494.99

This product was last offered at the strikethrough price on
05-03-2026

$ 479.69 USD
Free Shipping on orders $49 and up
Packaged by Turner - Corporate Logo
T#:28570831
Part#: M340IFRCAKT3
Ships on Sep 28, 2026
Sale - Save 1% $ 1,755.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,736.73 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 1,755.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,736.73 USD
Free Shipping on orders $49 and up

Are you experiencing unsettling creaks and wandering on the road, especially at highway speeds? Your vehicle's front control arms might be the culprit, losing their stability after just 50,000 miles. The solution is our comprehensive refresh kit, designed to upgrade and rejuvenate your front suspension.

This kit includes top-of-the-line components:

Turner Motorsport Adjustable Front Lower Control Arms: Crafted from lightweight Aluminum, Titanium, Chromoly, and Stainless Steel, these arms boast correct ball joint angles for full articulation. The clamp design facilitates easy alignment adjustments, while low friction 3-piece Teflon lined FK spherical bushings and Heim joints ensure smooth operation. Stainless steel roll center spacers of various sizes allow for precise tuning. Turner Motorsport Monoball Front Thrust Arms: Featuring OEM sealed, greased ball joints housed in 6061-T6 anodized aluminum for superior corrosion resistance, these thrust arms guarantee exceptional durability even under harsh conditions. CNC machined 304ss bearing inserts provide a precise fit, ensuring immediate, precise steering feedback with minimal maintenance requirements. Hardware: Our kit includes self-locking nuts, combination nuts, hex-bolts, and cage nuts, ensuring a complete and hassle-free installation. Restore functionality, comfort, and performance to your front suspension with the TMS upgraded refresh kit. Say goodbye to creaks, groans, and unstable handling, and enjoy a smooth and controlled ride on every road.

Show More Show Less

Complete Rear Upper Shock Mounting Kit
10X Entries Into Our F80 M3 Sweepstakes
Upper damper nuts vary in size from shock to shock. If you wish to replace them please measure your da
Packaged by Turner - Corporate Logo
T#:15677562
Part#: 07119905374-KT
Ships on Feb 24, 2027
Sale - Save 15% $ 115.30

This product was last offered at the strikethrough price on
05-03-2026

$ 98.18 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 115.30

This product was last offered at the strikethrough price on
05-03-2026

$ 98.18 USD
Free Shipping on orders $49 and up
Complete rear upper shock mounting kit includes everything you need to replace old, hardened mounts with new heavy duty replacements. Body seals, hardware, and reinforcement plates are included. Kit includes: Heavy-duty, German-made Lemfoerder rear shock mounts from the E46 M3 Elring shock mount gaskets Heavy-duty ECS rear shock mount reinforcement plates Locking nuts
Show More Show Less

Packaged by Turner - Corporate Logo
T#:583061
Part#: T33326770786KT
Ships on Feb 24, 2027
Sale - Save 8% $ 696.99

This product was last offered at the strikethrough price on
03-27-2026

$ 639.30 USD
Free Shipping
Sale - Save 8%
$ 696.99

This product was last offered at the strikethrough price on
03-27-2026

$ 639.30 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Control Arm Bushings
Trailing Arm Bushings
Sway Bar End Links
Rear Shock Mounts & Reinforcement Plates
Subframe Bushings
RTAB Limiters
Diff Bushings
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583022
Part#: T33326775551KT
Ships on Feb 24, 2027
Sale - Save 3% $ 441.99

This product was last offered at the strikethrough price on
05-29-2026

$ 428.80 USD
Free Shipping
Sale - Save 3%
$ 441.99

This product was last offered at the strikethrough price on
05-29-2026

$ 428.80 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Trailing Arm Ball Joint
Rear Control Arm Bushings
Rear Reinforcement Plate
Rear Shock Mounts & Gaskets
New Hardware

Show More Show Less

Packaged by Turner - Corporate Logo
T#:583066
Part#: T33326770786KT1
Ships on Feb 24, 2027
Sale - Save 5% $ 1,032.99

This product was last offered at the strikethrough price on
03-27-2026

$ 982.82 USD
Free Shipping
Sale - Save 5%
$ 1,032.99

This product was last offered at the strikethrough price on
03-27-2026

$ 982.82 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Control Arm Bushings
Trailing Arm Bushings
Sway Bar End Links
Rear Shock Mounts & Reinforcement Plates
Subframe Bushings
RTAB Limiters
Diff Bushings
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:41863730
Part#: 31336779613TKT
Ships on Feb 24, 2027
$ 778.86

This product was last offered at the strikethrough price on
08-04-2026

$ 771.16 USD
Free Shipping on orders $49 and up
$ 771.16 USD
Free Shipping on orders $49 and up
the smart choice for enthusiasts looking to do their suspension install the right way. Get the performance and reliability your BMW Z4 M deserves with Turner Motorsport’s expert-approved kit.

Front And Rear Suspension Refresh Kit - Level 3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:24344811
Part#: E463112-LVL3KT1
Ships on Feb 24, 2027
Sale - Save 2% $ 1,706.99

This product was last offered at the strikethrough price on
05-02-2026

$ 1,676.36 USD
Free Shipping
Sale - Save 2%
$ 1,706.99

This product was last offered at the strikethrough price on
05-02-2026

$ 1,676.36 USD
Free Shipping

Front Suspension Refresh Kit - Level 2
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15677491
Part#: 31106797237-KT
Ships in 4 Business Days
Sale - Save 3% $ 927.99

This product was last offered at the strikethrough price on
05-04-2026

$ 899.03 USD
Sale - Save 3%
$ 927.99

This product was last offered at the strikethrough price on
05-04-2026

$ 899.03 USD
Level 2 suspension refresh kit is designed to offer a complete overhaul of your BMW's front suspension. This kit address all suspension symptoms such as loose or not precise steering, clunking and wandering. Every component, from the control arms (with pressed in bushings) down to the tie rods and sway bar bushings are included for a new car feel. This refresh can be performed by a competent enthusiast in a day, assuming the correct tools are available. See kit contents tab for a list of included components
Show More Show Less
Packaged by Turner - Corporate Logo
T#:24344772
Part#: 311267689893T3KT
Ships on Sep 18, 2026
Sale - Save 5% $ 2,298.79

This product was last offered at the strikethrough price on
08-11-2026

$ 2,188.80 USD
Sale - Save 5%
$ 2,298.79

This product was last offered at the strikethrough price on
08-11-2026

$ 2,188.80 USD
No more clunks, squeaks, or wandering from the front or tail end of your BMW. Address problems all in one service - don't replace another component every few weeks, make it better than new! Level 3 includes: OEM Front & Rear Control Arms & Bushings OEM Tie Rods OEM Strut Mounts Sway Bar Bushings & Endlinks Rear Subframe Bushings Installation Hardware
Show More Show Less
Performance Suspension Cup Kit - Sport
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56616406
Part#: 29119-1KT2
Ships on Oct 29, 2026
New Item
$ 1,443.99

This product was last offered at the strikethrough price on
08-31-2026

$ 1,314.99 USD
$ 1,314.99 USD
Stock BMW suspensions are great out of the factory, but over time, factory shocks wear down, causing floating feels, nose dives during braking, and excess body lean in corners. By mating Bilstein’s precision B6 damping with H&R’s progressive Sport Springs, this kit is designed to eliminate body roll, tighten up turn in response, and give your BMW a lowered stance all without the super stiff, crashy feeling of track springs
Show More Show Less


Front And Rear Suspension Refresh Kit - Level 3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710780
Part#: 33526772864KT
Ships on Nov 30, 2026
$ 1,420.99

This product was last offered at the strikethrough price on
05-02-2026

$ 1,315.99 USD
$ 1,315.99 USD
Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering wheel, or sounds like squeaking, grinding or clunking. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 3 includes: 2 front control arms 2 control arm bushings 2 sway bar end links 2 tie rod assemblies 2 strut mounts 2 strut mount reinforcement plates 2 Heavy Duty ECS rear shock mount reinforcement plates 2 rear upper control arm bushings 2 camber arm bushings 4 rear upper and lower trailing arm ball joint upgrade 1 differential bushing 4 rear subframe bushings 2 trailing arm bushings 2 rear shock mounts 2 rear shock mount gaskets 4 ECS RTAB limiters
Show More Show Less
Packaged by Turner - Corporate Logo
T#:582930
Part#: T31126758513KT
Ships on Nov 30, 2026
Sale - Save 14% $ 908.99

This product was last offered at the strikethrough price on
05-03-2026

$ 783.34 USD
Sale - Save 14%
$ 908.99

This product was last offered at the strikethrough price on
05-03-2026

$ 783.34 USD

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 3 kit replaces:

Control Arms
Outer Tie Rods
Sway Bar End Links
Strut Tower Reinforcement Plate
Strut Mount & Gasket

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583023
Part#: T33326770824KT
Ships on Feb 25, 2027
Sale - Save 2% $ 750.99

This product was last offered at the strikethrough price on
06-03-2026

$ 738.20 USD
Free Shipping
Sale - Save 2%
$ 750.99

This product was last offered at the strikethrough price on
06-03-2026

$ 738.20 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Sway Bar End Links
Rear Trailing Arm Bushings
Rear Strut Mounts
Rear Sway Bar End Link
New Hardware

Show More Show Less

Performance Front Control Arm Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777298
Part#: 311267585130-KT
Ships on Dec 29, 2026
Sale - Save 1% $ 365.99

This product was last offered at the strikethrough price on
05-03-2026

$ 362.75 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 365.99

This product was last offered at the strikethrough price on
05-03-2026

$ 362.75 USD
Free Shipping on orders $49 and up
Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 1 includes: Front control arms with ball joints Turner Motorsport Polyurethane Control arm bushings with brackets - Upgraded performance, No more wrestling to install! All necessary hardware
Show More Show Less

Front Suspension Refresh Kit - Level 1
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777317
Part#: E463112-5-KT
Ships on Dec 29, 2026
Sale - Save 6% $ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 501.26 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 501.26 USD
Free Shipping on orders $49 and up
Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 1 includes: 2 front control arms 2 front control arm bushings 2 front inner ball joints
Show More Show Less
Packaged by Turner - Corporate Logo
T#:41255913
Part#: TSU4695PBX/163T
Ships on Jan 6, 2027
Sale - Save 8% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 211.49 USD
Sale - Save 8%
$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 211.49 USD
Avoid the hassle of pressing out old bushings or damaging new ones during installation! This bolt-on solution eliminates guesswork—no special tools required, no risk of damage. Just precision fitment, quick installation, and reliable performance.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:55353611
Part#: 31102283577KT8
Ships on Jan 6, 2027
New Item
$ 1,049.13 USD
Free Shipping on orders $49 and up
If you want your BMW to handle like it just rolled out of the factory your suspension needs to be tight, crisp, and completely free of play.
Packaged by Turner - Corporate Logo
T#:55353593
Part#: 31102283577KT6
Ships on Jan 6, 2027
New Item
$ 470.10 USD
Free Shipping on orders $49 and up
Factory rubber bushings weren't designed to last forever. Over time, miles and hard cornering turn those soft OEM bushings into mush

Front And Rear Suspension Refresh Kit HD - Level 3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710810
Part#: 31126768989-KT
Ships on Sep 18, 2026
$ 2,156.18 USD
$ 2,156.18 USD
Refresh your whole suspension system back to new with this level 3 refresh kit! Including all the components and hardware you need, this kit will transform your vehicle's ride back to showroom quality. All the parts you need at the click of a button!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:42638615
Part#: F8XCUPKT
Ships on Jan 13, 2027
Sale - Save 3% $ 1,449.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,413.28 USD
Sale - Save 3%
$ 1,449.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,413.28 USD
Give your F8X BMW the stance and handling it deserves with this Performance Suspension Kit. Featuring Bilstein B6 shocks and ECS Lowering Springs, it sharpens cornering and reduces wheel gap, all without compromising ride comfort. A perfect upgrade for drivers who want sportier performance and a more aggressive look.
Show More Show Less
Turner Front Suspension Refresh Kit - Level 1 - E83 X3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:582969
Part#: T31103443127KT
Ships on Sep 18, 2026
$ 595.99

This product was last offered at the strikethrough price on
03-20-2026

$ 541.99 USD
Free Shipping
$ 541.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Upper Control Arms
Front Lower Control Arms
Heavy Duty Ball Joints

Show More Show Less
Front And Rear Suspension Refresh Kit - BMW E36 M3 S50
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:24577348
Part#: E36S50FRSRKT
Ships on Feb 25, 2027
$ 3,116.99

This product was last offered at the strikethrough price on
04-15-2026

$ 2,672.99 USD
$ 2,672.99 USD
This kit includes all of the necessary high-quality aftermarket parts to completely rebuild your front and rear suspension in one comprehensive package! Level 3 includes: 2 front control arms 2 control arm bushings 4 sway bar end links 2 tie rod assemblies 2 strut mounts 2 strut mount gaskets 2 strut mount reinforcement plates 2 Heavy Duty ECS rear shock mount reinforcement plates 2 rear upper control arm bushings 2 camber arm bushings 4 rear upper and lower trailing arm ball joint upgrade 1 differential bushing 4 rear subframe bushings 2 trailing arm bushings 2 rear shock mount gaskets 2 upgraded rear shock mounts from the E46 M3 4 ECS RTAB limiters Adding strut reinforcement plates will help prevent the deformation of the strut tower and possible cracking. Upgrading the rear shock mounts and adding reinforcement plates is highly recommended because of the known failures with the mounts ripping apart. Replacing the lower trailing arm bushings with a ball joint will not only give a more solid feel in the suspension but last longer due to its rubber seal design.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:582868
Part#: T31126758533KT1
Ships on Sep 21, 2026
Sale - Save 8% $ 1,230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,130.17 USD
Sale - Save 8%
$ 1,230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,130.17 USD

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Front Strut Mounts & Reinforcements
Control Arms & Bushings
Outer Tie Rods
Sway Bar End Links

Show More Show Less
Turner Front Suspension Refresh Kit - Level 2 - E83 X3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:582970
Part#: T31103443127KT1
Ships on Sep 18, 2026
Sale - Save 6% $ 876.99

This product was last offered at the strikethrough price on
03-20-2026

$ 826.51 USD
Sale - Save 6%
$ 876.99

This product was last offered at the strikethrough price on
03-20-2026

$ 826.51 USD

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Front Upper Control Arms
Front Lower Control Arms
Heavy Duty Ball Joints
Sway Bar End Links
Strut Mounts
Outer Tie Rod Assembly

Show More Show Less
Packaged by Turner - Corporate Logo
T#:30463973
Part#: F10NMAWDFSSKT4
Ships in 1 Business Day
$ 1,436.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,050.99 USD
Free Shipping on orders $49 and up
$ 1,050.99 USD
Free Shipping on orders $49 and up

Upgrade your BMW’s front suspension with our high-quality Front Suspension Control Arm Kit, designed to restore stability and precision to your vehicle. Over time, worn control arms can lead to creaking, groaning, and instability, especially at highway speeds. Our comprehensive kit ensures a complete overhaul with all necessary components pre-assembled for easy installation.

Key Features:

Enhanced Stability: Say goodbye to wandering and instability on the road with new, durable control arms. Complete Solution: Our kit includes all four front control arms, two ball joints, and essential installation hardware. Premium Quality: Assembled by enthusiasts at ECS Tuning, ensuring top-notch performance and reliability. Ready for Installation: All related ball joints and bushings are pre-installed, saving you time and effort. Give your BMW the suspension upgrade it deserves. Enhance your driving experience with our Front Suspension Control Arm Kit and enjoy the confidence of driving a well-maintained vehicle. Order now and experience the difference in ride quality and stability.

Show More Show Less

Performance Suspension Cup Kit - EDC - BMW F80 M3, F82 M4
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:42638616
Part#: F8XCUPEDCKT
In Stock
$ 2,756.99 USD
$ 2,756.99 USD
Give your F8X BMW the stance and handling it deserves with this Performance Suspension Kit. Featuring Bilstein B6 shocks and ECS Lowering Springs, it sharpens cornering and reduces wheel gap, all without compromising ride comfort. A perfect upgrade for drivers who want sportier performance and a more aggressive look.
Show More Show Less

Front And Rear Suspension Refresh Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777299
Part#: 33172282484-KT
Ships on Feb 25, 2027
Sale - Save 4% $ 2,847.01

This product was last offered at the strikethrough price on
06-18-2026

$ 2,726.05 USD
Sale - Save 4%
$ 2,847.01

This product was last offered at the strikethrough price on
06-18-2026

$ 2,726.05 USD
Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering wheel, or sounds like squeaking, grinding or clunking. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 3 includes: 2 front control arms 2 front Polyurethane control arm bushings 4 sway bar end links 2 tie rod assemblies 2 strut mounts 2 strut mount reinforcement plates 2 Heavy Duty ECS rear shock mount reinforcement plates 2 rear upper control arm bushings 2 camber arm bushings 4 lower trailing arm ball joint 1 differential bushing 4 rear subframe bushings 4 ECS RTAB limiters 2 trailing arm bushings 2 rear shock mounts 2 rear shock mount gaskets
Show More Show Less
Packaged by Turner - Corporate Logo
T#:41289766
Part#: 31521428678TKT
Back Ordered
$ 52.99

This product was last offered at the strikethrough price on
07-23-2026

$ 50.99 USD
Free Shipping on orders $49 and up
$ 50.99 USD
Free Shipping on orders $49 and up
This kit comes with the seal and both dust covers needed to re-seal your vehicles input shaft on the front differential.

5-series Strut/Shock Mount Kit - E39 525i/528i/530i
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:182510
Part#: TMS182510
Back Ordered
$ 491.44

This product was last offered at the strikethrough price on
08-07-2026

$ 459.60 USD
Free Shipping
$ 459.60 USD
Free Shipping
Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

    You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i
    with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:1241384
    Part#: F3XPERFSUSR2KT
    Ships in 9 Business Days
    $ 1,940.99 USD
    Free Shipping
    $ 1,940.99 USD
    Free Shipping
    Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Rear: Lower Traction Rods - Adjustable length and elimination of deflection Toe Links - Increased range of adjustment and low suspension deflection Upper Control Arms - Upgraded durability over weak OEM linkages Sway Bar End Links - Adjustable height to eliminate preload
    Show More Show Less

    Performance Suspension Cup Kit - Sport - E39
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56363342
    Part#: 35-114079KT2
    Back Ordered
    New Item
    $ 1,198.99 USD
    $ 1,198.99 USD
    This kit matches progressive H&R Sport Springs with high pressure Bilstein B8 Performance Plus Gas Dampers. Because the B8 features a internally shortened piston rod, it pre loads the H&R spring correctly keeping the damper in its intended stroke range
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:3136217
    Part#: E46NONMPSOCOTKT
    Back Ordered
    Sale - Save 2% $ 2,417.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,375.76 USD
    Free Shipping
    Sale - Save 2%
    $ 2,417.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,375.76 USD
    Free Shipping
    Turner Motorsport refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components. Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering wheel, or sounds like squeaking, grinding or clunking. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. The Turner engineering team set out to design a no-compromise solution that requires no modification and offers instantaneous cornering and braking response. Our control arm bearings utilize a unique grease-able spherical bearing that is both serviceable and replaceable, with integrated dust seals to help keep dirt and moisture out. This bearing offers considerable improvement in both precision and durability compared to other unsealed poly and delrin bushing inserts previously available, which can wear prematurely due to contamination. The bearing assembly utilizes the highest quality materials, precision machining quality, and components to ensure a perfect fit and longest lasting component life possible. These Turner rear trailing arm bushings (RTAB) now feature a much sought after sealed design. Turner recognized the popularity of their original RTAB design as well as the customer demand for this sealed upgrade, ultimately utilizing the same concept at the front control arm monoballs. A sealed design means not only that contaminants such as salt, grit, and road debris will not affect the bearing, but also means they require no lubrication or maintenance - ever! Adding strut reinforcement plates will help prevent the deformation of the strut tower and possible cracking. Upgrading the rear shock mounts and adding reinforcement plates is highly recommended because of the known failures with the mounts ripping apart. Replacing the lower trailing arm bushings with a ball joint will not only give a more solid feel in the suspension but last longer due to its rubber seal design. See complete list below under Kit Contents.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:583088
    Part#: T33521091711KT
    Back Ordered
    Sale - Save 3% $ 1,083.99

    This product was last offered at the strikethrough price on
    08-10-2026

    $ 1,051.75 USD
    Free Shipping
    Sale - Save 3%
    $ 1,083.99

    This product was last offered at the strikethrough price on
    08-10-2026

    $ 1,051.75 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 2 kit replaces:

    Subframe Bushings
    Shock Mounts
    Diff Bushings
    Control Arms & Bushings
    Sway Bar End Links
    Hardware

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:182514
    Part#: TMS182514
    Back Ordered
    Sale - Save 4% $ 873.02

    This product was last offered at the strikethrough price on
    06-26-2026

    $ 835.52 USD
    Free Shipping
    Sale - Save 4%
    $ 873.02

    This product was last offered at the strikethrough price on
    06-26-2026

    $ 835.52 USD
    Free Shipping
    Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

    This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. This package includes all of the original parts used in the E39 factory sport suspension. If you're overhauling your E39 suspension with the factory sport shocks and springs this is the mount package you need (see our other listings if you're using performance shocks such as Bilstein). Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

    Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • front bump stop
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 540i
    with factory sport suspension
  • Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:582923
    Part#: T31126769717KT
    Back Ordered
    Sale - Save 3% $ 873.25

    This product was last offered at the strikethrough price on
    07-23-2026

    $ 848.13 USD
    Sale - Save 3%
    $ 873.25

    This product was last offered at the strikethrough price on
    07-23-2026

    $ 848.13 USD

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 2 kit replaces:

    Control Arms
    Outer Tie Rods
    Sway Bar End Links

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:583089
    Part#: T33521091711KT1
    Back Ordered
    $ 1,031.99

    This product was last offered at the strikethrough price on
    08-10-2026

    $ 998.99 USD
    Free Shipping
    $ 998.99 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 2 kit replaces:

    Subframe Bushings
    Shock Mounts
    Diff Bushings
    Control Arms & Bushings
    Sway Bar End Links
    Hardware

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:1241377
    Part#: F3XPERFSUSFR2KT
    Ships in 9 Business Days
    $ 4,114.99 USD
    Free Shipping
    $ 4,114.99 USD
    Free Shipping
    Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Tension Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Sway Bar End Links - Adjustable height to eliminate preload Rear: Lower Traction Rods - Adjustable length and elimination of deflection Toe Links - Increased range of adjustment and low suspension deflection Upper Control Arms - Upgraded durability over weak OEM linkages Sway Bar End Links - Adjustable height to eliminate preload For more detailed information on individual parts please view the kit contents section at the bottom of the page.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:3136216
    Part#: E46NONMPSOTKT
    Back Ordered
    Sale - Save 2% $ 2,380.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,340.62 USD
    Free Shipping
    Sale - Save 2%
    $ 2,380.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,340.62 USD
    Free Shipping
    Turner Motorsport refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components. Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering wheel, or sounds like squeaking, grinding or clunking. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. The Turner engineering team set out to design a no-compromise solution that requires no modification and offers instantaneous cornering and braking response. Our control arm bearings utilize a unique grease-able spherical bearing that is both serviceable and replaceable, with integrated dust seals to help keep dirt and moisture out. This bearing offers considerable improvement in both precision and durability compared to other unsealed poly and delrin bushing inserts previously available, which can wear prematurely due to contamination. The bearing assembly utilizes the highest quality materials, precision machining quality, and components to ensure a perfect fit and longest lasting component life possible. These Turner rear trailing arm bushings (RTAB) now feature a much sought after sealed design. Turner recognized the popularity of their original RTAB design as well as the customer demand for this sealed upgrade, ultimately utilizing the same concept at the front control arm monoballs. A sealed design means not only that contaminants such as salt, grit, and road debris will not affect the bearing, but also means they require no lubrication or maintenance - ever! Adding strut reinforcement plates will help prevent the deformation of the strut tower and possible cracking. Upgrading the rear shock mounts and adding reinforcement plates is highly recommended because of the known failures with the mounts ripping apart. Replacing the lower trailing arm bushings with a ball joint will not only give a more solid feel in the suspension but last longer due to its rubber seal design. See complete list below under Kit Contents.
    Show More Show Less

    E34 535i Bilstein/H&R Sport Suspension Package 7/90-1993
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:187026
    Part#: E34535SPORT-LATE
    Back Ordered
    $ 1,238.99

    This product was last offered at the strikethrough price on
    07-01-2026

    $ 1,170.14 USD
    Free Shipping
    $ 1,170.14 USD
    Free Shipping
    The first step in reducing bodyroll and making this car faster through turns is to replace the shocks and springs. The lower, stiffer H&R Sport springs for the 535i will lower the ride height and manage weight transfer better than the stock suspension. We package these H&R Springs with a set of Bilstein Sport shocks for a complete upgrade in a discounted package.

    H&R Sport springs lower the ride height by 1.3" in front and 0.75" in the rear and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs.

    We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. On the E34, suspension travel is crucial especially with a lowered ride height. This suspension is stiff but delivers uncompromising handling. These fit with the stock strut and shock mounts, making for an easy and clean install. Because BMW used multiple combinations of front strut and strut mount we will need specific information from your car in order to send you the correct parts.

    Parts list:
    • 1 set - H&R Sport Springs
    • 1 pair - Bilstein Front Sport struts
    • 1 pair - Bilstein Rear Sport Shocks

    This item fits the following BMWs:
    7/1990-1993 E34 BMW 535i sedan
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:583093
    Part#: T33322283547KT
    Back Ordered
    $ 2,128.99

    This product was last offered at the strikethrough price on
    03-13-2026

    $ 1,924.99 USD
    Free Shipping
    $ 1,924.99 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 2 kit replaces:

    Subframe Bushings
    Diff Bushings
    Control Arms & Bushings
    Sway Bar End Links
    Hardware

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:583038
    Part#: T33326767748KT1
    In Stock
    Sale - Save 4% $ 827.99

    This product was last offered at the strikethrough price on
    08-11-2026

    $ 794.59 USD
    Free Shipping
    Sale - Save 4%
    $ 827.99

    This product was last offered at the strikethrough price on
    08-11-2026

    $ 794.59 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Rear Control Arms
    Rear Ball Joints
    Rear Shock Mounts
    New Hardware

    Show More Show Less
    Turner Rear Suspension Refresh Kit - Level 2 - E36 318ti
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:583095
    Part#: T33329061945KT6
    Back Ordered
    Sale - Save 8% $ 223.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 206.92 USD
    Free Shipping
    Sale - Save 8%
    $ 223.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 206.92 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 2 kit replaces:

    Subframe Bushings
    Shock Mounts & Reinforcement Plates
    Diff Bushings
    Trailing Arm Bushings
    Sway Bar End Links
    Self Locking Collar Nut

    Show More Show Less

    3-series Strut/Shock Mount Kit - MZ3
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:340357
    Part#: MZ3MOUNTKIT
    Back Ordered
    Sale - Save 3% $ 474.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 460.74 USD
    Free Shipping
    Sale - Save 3%
    $ 474.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 460.74 USD
    Free Shipping
    This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

    We sell the basic strut and shock mount package, which includes:
  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets
    In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1998-2002 Z3 BMW M Roadster M Coupe
  • Show More Show Less

    Complete 16-Piece Control Arm Kit - E32
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:641082
    Part#: E32CNTRLCMPLTKT
    Ships on Sep 21, 2026
    Sale - Save 11% $ 859.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 763.56 USD
    Sale - Save 11%
    $ 859.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 763.56 USD
    Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Included in this Kit: Front and Rear upper and lower control arms Tie rod components Subframe bushings Front and rear end links
    Show More Show Less
    Shocks and spring Installation Kit - E38 740i/iL Non EDC
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:553600
    Part#: 33521094091KT4
    Back Ordered
    $ 194.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 187.99 USD
    Free Shipping
    $ 187.99 USD
    Free Shipping

    This kit is contains all new strut and shock mounts and hardware needed when installing a aftermarket suspension on your vehicle. 

    Click Here for Spring options 

     

    For vehicles without EDC only

    Fits the following BMW's

    1995-2001 E38 740i 740iL with out EDC 

     

    Show More Show Less
    Turner Rear Suspension Refresh Kit - Level 1 - E36 318ti
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:583044
    Part#: T33329061945KT1
    Back Ordered
    Sale - Save 16% $ 145.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 122.16 USD
    Free Shipping
    Sale - Save 16%
    $ 145.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 122.16 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Rear Shock Mounts & Gaskets
    Reinforcement Plates
    Trailing Arm Bushings
    Hardware

    Show More Show Less