BC Racing BMW Suspension Parts

BC Racing ZR Series Coilover Suspension Kit - On-Center Front Mounts ...

T#:4333522

Part#: I-26-ZR-C

Back Ordered

2% off MSRP $ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD

Add to Wish List

Qty

2% off MSRP

$ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

BC Racing DS Series Coilover Kit - 5-Bolt Top Mounts - 2015+ F83 M4 C...

T#:598300

Part#: I-69-DS

Back Ordered

3% off MSRP $ 1,445.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,395.00 USD

Add to Wish List

Qty

3% off MSRP

$ 1,445.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BMW E36 RM Series Coilover Suspension Kit

T#:4319889

Part#: I-01-RM

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

E36 RM Series Coilover Suspension Kit from BC Racing offers a top-tier solution for BMW enthusiasts seeking adjustable, street-and-track capable suspension upgrades. This kit is designed with high-quality inverted mono-tube dampers that enhance handling and performance. The RM Series provides superior strength and consistency, thanks to its large 42mm damper rod and inverted design. This setup reduces unsprung weight and improves steering geometry, making it ideal for both daily driving and competitive use.

Highly customizable for tailored performance
Features inverted mono-tube dampers for improved strength and resistance
Linear piston and damping curve for precise handling
Independent height adjustment from spring compression
30-clicks of simultaneous compression and rebound adjustment
Front camber plates included with applicable kits
Rear camber plates available for applicable kits
Custom spring rates and Swift spring compatibility
Custom or paired valving for optimized performance
1-year warranty against manufacturer defects
Fully rebuildable for long-term use
Supplied by Turner Motorsport for assured quality

Show More Show Less

BC Racing F30 ER Series Coilover Suspension Kit - Without Pillowball ...

T#:4347101

Part#: I-80-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - On-Center Mounts - Z3 M...

T#:4333502

Part#: I-10-RM-C

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

T#:4347103

Part#: I-84-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - Weld-In - E9 2800CS 3.0...

T#:555832

Part#: I-44-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

8k Front & 5k Rear Spring Rate
Linear front & V-Barrel rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Aluminum and Rubber Rear Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - On-Center Front Mounts ...

T#:4333550

Part#: I-14-ER-C

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - Without Rear Pillowball...

For models originally WITHOUT EDC

T#:4333517

Part#: I-39-ZR

Back Ordered

2% off MSRP $ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD

Add to Wish List

Qty

2% off MSRP

$ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

DS Series Coilover Suspension Kit - U25 MINI Countryman

T#:36066230

Part#: T-10-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

BC Racing RM Series Coilover Suspension Kit - E36 318ti

T#:4319911

Part#: I-25-RM

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

T#:4347105

Part#: I-68-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - E46 Non-M RWD

T#:4333542

Part#: I-02-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BR Series Coilover Suspension Kit For G8x

T#:13233503

Part#: I-109-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only highly effective but also don't break the bank! The BR Series coilover suspension kit features mounting points and brackets that are compatible with all stock mounting locations and components. It is their most popular and versatile suspension setup, offering linear springs (where possible), 30 levels of dampening adjustment including simultaneous compression and rebound control, and a 2-inch minimum ride height drop. All BR Series kits are Dyno tested to determine the best valving and spring rates for each chassis and are tested for a minimum of 6 months before being released to the public to ensure ride quality and reliability. All upper shock and strut mounts are constructed of 6061-T6 Aluminum to ensure a lightweight and incredibly strong design. Front design options include Caster/Camber Plates, Camber plates, and Rubber Mount Plates. See below for the option fitted to your chassis's BR Series Kit. The adjustable plate designs allow for up to 3 degrees of camber adjustment. The Rubber Mount Plates are better for preventing unwanted NVH. Lower shock mounts are either made of 6061-T6 Aluminum just like the top mounts (Fork or Bolt Eye Style Mount) that have been milled from a single piece of material, or high-quality STKM13C steel with all brackets welded robotically. Both styles are then powder coated for corrosion protection and styling. All springs used, linear, S-barrel, and v-barrel, are made of SAE9254 steel and utilize a Zinc coating under a powder coating finish to ensure rust cannot penetrate the metal of the spring and compromise performance or reliability. Liner springs are used in places possible unless otherwise limited by the OE design of the vehicle that does not allow it. In that case, S-Barrel or V-Barrel springs are used to match OE shape/style specifications and the spring's rate is then matched to the linear rate. BC Racing creates their kits utilizing a wide variety of shock types, lengths, and diameters. Each vehicle depending on their data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in their factory and dyno tested before use in their kits. Shocks are paired together by their compression and rebound numbers after dyno testing for even and precise quality and performance. Each shock body used in their system is 53mm for added strength, performance, and increased fluid capacity (unless limited spacing will not allow it). The shocks are then coated in black chrome for a clean, cohesive appearance and corrosion resistance. Specs and Features: 8k Front & 5k Rear Spring Rate S-Barrel front & Linear rear springs Valved specifically to spring style and rate Aluminum and Rubber Front Mounts Rear Rubber Mounts Black Powder Coated Components All OE style brackets and mounting for a perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening 2-inch minimum and 3+ Inches of total potential drop Great for Track, Street, and any other conditions

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - Weld In - E28 528e 533i...

T#:598289

Part#: I-34-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

HM Series Coilover Suspension Kit - Without Rear Pillowball - E90/92 ...

T#:4319924

Part#: I-03-HM

Back Ordered

$ 2,535.00 USD

Add to Wish List

Qty

$ 2,535.00 USD

Add to Wish List

BC Racing's HM Coilover system offers the same great benefits of the RM Series with the addition of 2 way damping adjustment. Each HM Coilover system features inverted mono-tube dampers with independently adjustable compression and rebound. The inverted damper design moves vital damper fluid away from detrimental heat sources to avoid overheating which can cause damper fade under extreme track use. Know your safe from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Engineered for 100% track use * 30 levels of separate rebound and compression adjustment * Inverted damper design (depending on models) * Dual Piston design (1 res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty NOTE: LEAD TIMES FOR ALL NEW ORDERS ARE 4-8 WEEKS.

Show More Show Less

BC Racing DS Series Coilover Kit - F01 All Models w/o OE Air Suspensi...

T#:598301

Part#: I-73-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

DS Series Coilover Suspension Kit Without DDC F60

T#:36066232

Part#: T-09-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

DS Series Coilover Suspension Kit - F66 MINI Cooper

Earn 5% back in Turner Rewards on orders placed 10/28-10/31. Redeem 11/27-12/1. Terms & conditions apply

T#:46924982

Part#: T-11-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing DS Series Coilover Suspension Kit - F12/F13 650i

T#:598288

Part#: I-27-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - E36 318ti

T#:598283

Part#: I-25-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

For models originally WITHOUT EDC

T#:4333548

Part#: I-39-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BR Series Coilover Suspension Kit Without DDC F54

T#:36066233

Part#: T-08-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing DS Series Coilover Kit - F06 640i 650i

T#:598293

Part#: I-45-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BR Series Coilover Suspension Kit Without DDC F54

T#:23615476

Part#: T-08-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Revamp your Mini's performance with BC Racing's BR Series coilover suspension kit. Known for over a decade for their adjustable, street-and-track capable coilovers, BC Racing offers effective solutions without breaking the bank. Here are the key benefits of this suspension upgrade:

Completely compatible with all stock mounting locations and components
Versatile and popular suspension setup with linear springs (where applicable)
30 levels of dampening adjustment for simultaneous compression and rebound control
2-inch minimum ride height drop for enhanced aesthetics and performance
Dyno tested for optimal valving and spring rates specific to each chassis
Upper shock and strut mounts made of lightweight and sturdy 6061-T6 Aluminum
Front design options include Caster/Camber Plates, Camber plates, and Rubber Mount Plates
Up to 3 degrees of camber adjustment with adjustable plate designs
Option of Rubber Mount Plates to minimize unwanted NVH
Lower shock mounts constructed from corrosion-resistant materials like 6061-T6 Aluminum or high-quality STKM13C steel
Springs made of SAE9254 steel with Zinc coating for rust prevention
Utilization of different shock types, lengths, and diameters for various vehicles
Hand-assembled and dyno-tested shocks for quality and performance
Coated in black chrome for durability and a sleek appearance

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - Off-Center Front Mounts...

T#:4333520

Part#: I-14-ZR-O

Back Ordered

$ 2,835.00 USD

Add to Wish List

Qty

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - E38 730i/iL 740i/iL 750...

T#:4319910

Part#: I-23-RM

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

For models originally WITH EDC

T#:4333547

Part#: I-13-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - On-Center Front Mounts ...

T#:4333519

Part#: I-14-ZR-C

Back Ordered

$ 2,835.00 USD

Add to Wish List

Qty

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - Off-Center Front Mounts...

T#:4333503

Part#: I-14-RM-O

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Off-Center Front Mounts...

T#:4333551

Part#: I-14-ER-O

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mounts - F32...

T#:47439430

Part#: I-61-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - BMW E93 M3 (without EDC...

T#:47576359

Part#: I-154-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

T#:47439395

Part#: I-68-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - BMW F26 X4 xDrive ...

T#:36811825

Part#: I-66-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mounts - BMW...

T#:47439375

Part#: I-29-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mounts - F30...

T#:36811813

Part#: I-41-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - E90/E92 325xi 328xi 330...

T#:47439369

Part#: I-113-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - F95 X5M, F96 X6M ...

T#:46409675

Part#: I-159-BR

Back Ordered

$ 1,215.00 USD

Add to Wish List

Qty

$ 1,215.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

Show More Show Less

BR Series Coilover Suspension Kit - F66 MINI Cooper

T#:46924980

Part#: T-11-BR

Back Ordered

$ 1,215.00 USD

Add to Wish List

Qty

$ 1,215.00 USD

Add to Wish List

BC Racing ER Series Coilover Suspension Kit - BMW E93 M3 (with EDC) ...

T#:47576361

Part#: I-153-ER

Back Ordered

$ 1,955.00 USD

Add to Wish List

Qty

$ 1,955.00 USD

Add to Wish List

The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

T#:47439396

Part#: I-68-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

ZX Series Coilover Suspension Kit - F31 (3-Bolt Top Mounts)

For Vehicles With 3-Bolt Top Mounts

T#:51320841

Part#: I-114-ZX

Back Ordered

$ 2,595.00 USD

Add to Wish List

Qty

$ 2,595.00 USD

Add to Wish List

For the F31 Touring owner who demands a professional-grade suspension setup, the BC Racing ZX Series delivers unparalleled driver feedback and thermal stability. By moving the compression valving to the external canisters, the system can better manage the extreme temperatures generated during track use, ensuring that damping rates remain consistent from the first lap to the last. The 3-way adjustment allows for specialized tuning; for instance, softening high-speed compression to handle curbing while keeping low-speed compression firm for sharp turn-in and minimal body roll. This level of control, paired with a significant reduction in unsprung weight via strategic component design, transforms the F31 into a remarkably poised and highly responsive racing machine. Key Features: Triple-Valved Control: 30 clicks of Rebound, 15 clicks of High-Speed Compression, and 15 clicks of Low-Speed Compression. Thermal Management: External reservoirs keep fluid cooler, extending the life of the oil and maintaining valving consistency. Reduced Unsprung Weight: Lightweight aluminum components where possible to improve wheel tracking over high-speed imperfections. Custom Valving Available: Valving can be paired specifically for custom spring rates or Swift Spring upgrades. Fully Rebuildable: Every component is individual and replaceable, making this a long-term investment for a competitive chassis. Specifications: Vehicle Fitment: 2012–2019 BMW 3-Series (F31) Touring / Wagon (3-Bolt Top Mount models). Spring Rates (Default): Front: 6 kg/mm | Rear: 10 kg/mm. Spring Options: Customizable from 6kg to 30kg+ to suit specific aero or tire requirements. Damping Architecture: Mono-tube with external canisters. Adjustment Type: Independent ride height and 3-way damping.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - BMW F34 328i RWD ...

T#:46753524

Part#: I-95-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mounts - F30...

T#:47439400

Part#: I-41-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - BMW E93 M3 without EDC ...

T#:46753509

Part#: I-154-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort.

Show More Show Less

BR Series Coilover Suspension Kit - G16 8-Series GC

For Gran Coupe AWD models only

T#:50731709

Part#: I-123-BR

Back Ordered

$ 1,215.00 USD

Add to Wish List

Qty

$ 1,215.00 USD

Add to Wish List

Step up to a real coilover system without blowing the budget with the BC Racing BR Series. Developed through extensive chassis testing and ongoing refinement, this kit is built to deliver sharper handling, everyday comfort, and the durability enthusiasts expect when the miles—and the pace—start adding up. BC avoids the trap of flashy, overly stiff spring specs and instead selects rates that preserve compliance while significantly improving body control. Matched damper valving ties the package together, producing a ride that feels planted, predictable, and easy to live with day after day. The mono-tube design resists heat fade during aggressive use, and the linear piston profile ensures smooth, consistent feedback as cornering loads increase. Because ride height is adjusted independently from preload, you can dial in the stance you want without compromising travel or upsetting the car’s balance. With 30 clicks of simultaneous compression and rebound adjustment, the BR Series covers a wide spectrum of driving styles—from daily commuting to serious weekend work. Key Features Highly customizable configuration 10KG front / 5KG rear spring rates Mono-tube shock construction Linear piston and damping characteristics Independent ride height adjustment 30-position compression and rebound tuning Front camber plates standard on applicable kits Rear camber solutions for select vehicles Custom spring rates and Swift compatibility Optional custom or matched valving Fully rebuildable design Protected by a 2-year manufacturer warranty

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - F30...

T#:47439374

Part#: I-80-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - BMW F34 328i RWD ...

T#:47576365

Part#: I-95-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - E70 X5 xDrive 30i/35d/3...

T#:47439367

Part#: I-77-DS

Ships in 5 Business Days

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

Project Cars

SELECT YOUR BMW

BC Racing BMW Suspension Parts

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results