Bilstein BMW Suspension Parts

The B16 PSS9 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS9 offer 9 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P9) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS9. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

• Largest available piston diameter for greater sensitivity and precise control.
• Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
• 9-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
• Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
• Weather resistant coating to resist oxidization, and ensure long life.
• Lighter weight reduces wear and tear on suspension components.
• Wrenches to adjust front and rear ride height included!

Fits the Following Vehicles:
1996-1999 BMW E36 M3

Bilstein B4 OE Sport Shocks & Struts Kit for Your Mini

Rejuvenate your Mini's suspension with the Bilstein B4 OE Sport Shocks & Struts Kit. This kit, encompassing four shocks and struts, is crafted to combat the wear and tear caused by road imperfections. From potholes to various road hazards, this comprehensive kit ensures an enhanced ride comfort and superior suspension performance for your Mini.

Key Benefits:

• Restoration of ride comfort
• Improved suspension performance
• Protection against road hazard wear
• Complete set of four shocks and struts for comprehensive replacement

The Bilstein B8 Performance Plus Kit includes two front struts and two rear shocks. These shocks are for use with lowered springs such as from H&R or Eibach. We do not recommend that you use them with any factory spring, including factory sport package springs. With the increased damping rates from stock you will have much more control over body motions. These will give a much more buttoned down and taut feeling with lowering springs compared to stock shocks.

These shocks fit the following BMWs:

1994-1999 E36 M3, M3 Convertible

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. The Bilstein B6 Performance Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.

This Bilstein B6 Performance shock package fits the following BMWs:

2013+ E84 BMW X1 x28i x35i

BMW F30 Bilstein B12 Pro-Kit Suspension System offers the ideal blend of sport dynamics, superior appearance, and high performance for BMW drivers. This suspension kit is engineered to enhance your vehicle's handling characteristics significantly, delivering both precision control and exceptional driver comfort. Perfect for those seeking a more engaging driving experience and improved road dynamics.

• Professional Cornering System (PCS): Delivers precise response and excellent performance for predictable control.
• Lowering: Lowers the vehicle by 20-15mm at both front and rear, providing a more aggressive and action-ready stance.
• Complementary Design: Features BILSTEIN dampers and EIBACH Pro-Kit performance springs that are road-tested and finely tuned to work seamlessly together.
• Enhanced Appearance: Achieves a lower, sportier look for the vehicle.
• Limited Lifetime Warranty: Comes with a warranty against defects in material and workmanship for the life of each Gas Pressure Shock. Proof of purchase required for warranty claims.

Position: Front Left
Setting: Performance, for stock suspensions

Front Left Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance Front shock fits the following BMWs:

2013-2015 E84 BMW X1 x28i x35i 2.0L 3.0L