Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. These poly inserts provide the inherent benefit of stiffness, which translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
MINI R50 to R59 Performance Polyurethane Front Sway Bar Bushing Set is designed to enhance your vehicle's cornering performance. Sway bars transmit cornering forces from the outside wheels to the inside wheels, keeping the vehicle flat and reducing body roll, thus improving the driver's confidence during cornering. OEM rubber sway bar bushings are often too soft, leading to excessive movement and reduced sway bar effectiveness.
Powerflex polyurethane sway bar bushings are much firmer than factory rubber bushings, reducing body roll and ensuring the sway bars perform at their best. These bushings maintain their integrity far better than OEM versions, allowing sway bars to function at their fullest potential.
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
MINI F Chassis Performance Polyurethane Front Control Arm - Front Bushings provide an exceptional upgrade for your Mini's suspension system. Designed to improve handling and performance, these high-quality polyurethane bushings replace the factory rubber bushings for enhanced durability and precision.
Upgrade your Mini's suspension system with the MINI F Chassis Performance Polyurethane Front Control Arm - Front Bushings for a more responsive and enjoyable driving experience.
Upgrade your Mini's suspension performance with Powerflex Performance Polyurethane Control Arm Bushings. These bushings play a crucial role in connecting your Mini's wheels to the chassis, ensuring optimal suspension geometry while reducing noise, vibration, and harshness (NVH).
Powerflex, the leading suspension bushing manufacturer in Europe, brings you premium performance bushings engineered to exact-fit standards. With Powerflex, expect improved handling, turn-in, and overall driving experience.
Ensure ease of installation and extended service life with Powerflex Copper Grease PCG1. For dedicated track cars, Powerflex Black Series bushings offer ultimate stiffness with a 95A durometer polyurethane construction.
Plus, Powerflex stands behind their products with a lifetime warranty for the original purchaser, providing peace of mind for your Mini's performance upgrades.
MINI Countryman R60 / R61 Front Control Arm Rear Bushing is essential for connecting the wheels to the chassis while maintaining proper suspension geometry. These bushings are crucial for absorbing noise, vibration, and harshness (NVH) and ensuring a smooth ride.
For the BMW E46 M3, upgrading the rear subframe front bushings is a smart move for both performance enhancement and preventive maintenance. The rear subframe is a critical component in the E46 M3’s suspension system, and using stronger, more durable bushings helps to ensure the car’s longevity and improve its overall handling dynamics.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
For BMW E30, Z3, E21, and 2002 models, upgrading to adjustable rear trailing arm bushings from manufacturers like Powerflex offers both improved performance and the ability to fine-tune suspension alignment. These bushings are designed to replace the factory rubber bushings, which can degrade over time and lead to imprecise handling.
These adjustable rear trailing arm bushings are perfect for enthusiasts looking for more control over their vehicle’s alignment and handling, whether for street driving or performance applications. They offer a great balance of increased performance, durability, and adjustability without sacrificing daily driving comfort.
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2000 - 2006 E53 X5 SUV X5 X5 3.0i X5 4.4i X5 4.6is X5 4.8is
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Rear trailing arm bushings serve the key purpose of keeping rear suspension triangulated and the vehicle moving where it's directed to. Though failure prone, even factory-fresh OEM rubber bushings allow for deflection, causing suspension geometry changes on hard launches, over bumps in the road, and during cornering. This deflection results in clunking in the rear end, a “rear steer” feeling, and uneven tire wear.
Powerflex polyurethane rear trailing arm bushings are firmer than OEM bushings, resulting in a reduction of deflection that causes these suspension angle changes, improving handling over bumps and with a proper alignment, extending tire wear.Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Non-M Rear Lower Arm Rear Bushing for the BMW E39 5 Series, specifically designed for a 12mm fitting, is an excellent performance enhancement for the vehicle's rear suspension system. By replacing the factory rubber bushings with high-performance polyurethane, this bushing offers numerous advantages for improved handling and stability.
Enhanced Suspension Performance: The stiffer polyurethane material reduces flex and unwanted movement in the rear lower arm, resulting in improved handling characteristics. This upgrade enhances cornering stability, allowing for more confident driving, especially in dynamic situations.
Long-lasting Durability: Unlike factory rubber bushings, which can deteriorate over time, these polyurethane bushings are engineered to withstand extreme conditions. They resist wear from oil, heat, and road debris, ensuring long-lasting performance and reliability.
Improved Driver Feedback: The firmer bushing design allows for better road feel and steering response, giving drivers a more connected experience with the vehicle. This leads to enhanced control during cornering and a more engaging driving experience.
Simple Installation: Designed for a direct fit into the BMW E39 5 Series lower arm, these bushings require no modifications for installation. This ease of fitment makes it a straightforward upgrade for enthusiasts and DIYers alike.
Versatile Use: Whether for daily driving or spirited performance applications, these bushings help optimize the rear suspension setup, improving tire contact with the road and enhancing overall performance.
This upgrade is ideal for BMW E39 5 Series owners who want to enhance their vehicle's handling capabilities and stability. The Powerflex Non-M Rear Lower Arm Rear Bushing is a reliable choice for improving the performance of the rear suspension system, making it suitable for various driving conditions and styles.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Rear Sway Bar Link to Sway Bar Bushings for BMW E36, E30, E28, and E24 models are engineered to provide a performance upgrade by connecting the sway bar links to the sway bar with high-quality polyurethane bushings. This enhancement significantly improves suspension performance and handling dynamics.
Ideal for BMW enthusiasts looking to enhance their vehicle's handling characteristics and overall suspension performance, these bushings deliver both durability and responsiveness, making them suitable for both everyday driving and spirited performance scenarios.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The BMW E60/E61 M5 Front Sway Bar Bushings & Plate Kit (26.5 mm) by Powerflex is an essential upgrade for enhancing the handling and responsiveness of the BMW M5. This kit is specifically engineered to replace the factory sway bar bushings and includes high-quality polyurethane bushings that fit sway bars with a 26.5 mm diameter.
Durable Polyurethane Bushings: Unlike the stock rubber bushings, Powerflex bushings are made of durable polyurethane. This material is more resistant to wear, oil, and other contaminants, making it ideal for both street and track use. Polyurethane offers a firmer feel than rubber, reducing unwanted flex and improving sway bar performance.
Sway Bar Compatibility: Designed to fit the 26.5 mm front sway bar found on BMW E60 (sedan) and E61 (wagon/touring) M5 models, this kit provides an exact fit without the need for modification.
Enhanced Performance: The stiffer bushings reduce sway bar movement under load, improving the car’s stability during cornering, reducing body roll, and enhancing overall vehicle control. This results in sharper, more responsive steering and better handling, especially under aggressive driving conditions.
Corrosion-Resistant Plates: The included plates are designed to resist corrosion and ensure a solid, secure mounting for the bushings, contributing to the longevity and reliability of the entire suspension system.
Long-Lasting Design: Polyurethane bushings have a longer service life compared to traditional rubber bushings, providing a durable and cost-effective solution to maintaining precise handling over time.
This Powerflex Front Sway Bar Bushings & Plate Kit is a must-have upgrade for M5 owners seeking improved handling, longevity, and performance without sacrificing ride quality.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Discover the perfect blend of performance and affordability with Powerflex Handling Packs. These thoughtfully assembled packs include a range of top-quality bushings, offering an excellent value for your suspension upgrade needs. By bundling these components, you can save on costs compared to purchasing them individually.
Powerflex Handling Packs are meticulously designed to maximize your suspension's performance, making them an ideal addition to other enhancements such as shock absorbers and springs. You'll not only enjoy improved handling but also the exceptional reliability and durability that Powerflex parts are known for. Rest assured, every component is backed by Powerflex's Lifetime Warranty.
The Powerflex Handling Pack includes crucial components, such as:
As a bonus, you'll receive a Powerflex keyring and sticker as part of the package.
Elevate your suspension to new heights with the Powerflex Handling Pack and experience enhanced performance and the peace of mind that comes with top-tier quality.
The Powerflex Rear Lower Arm Rear Bushing for the BMW E60 5 Series, E63 6 Series, E53 X5, and E39 5 Series, designed for a 14mm fitting, is a performance-oriented upgrade that enhances the functionality of the rear suspension system. By replacing the stock rubber bushings with high-quality polyurethane, this bushing offers multiple advantages for improved handling and stability.
Improved Handling Dynamics: The firmer polyurethane construction reduces flex and unwanted movement in the rear lower arm, resulting in enhanced cornering stability and overall handling. This upgrade helps drivers feel more in control during aggressive driving and tight turns.
Superior Durability: Unlike traditional rubber bushings that can wear out and degrade over time, Powerflex bushings are designed to withstand harsh conditions. They resist damage from oil, heat, and road debris, ensuring consistent performance and longevity.
Enhanced Steering Feedback: By minimizing unwanted movement within the rear suspension, these bushings provide better road feedback and improved steering response. This results in a more connected and engaging driving experience, allowing drivers to feel more attuned to their vehicle.
Easy Installation: Specifically designed for the E60, E63, E53, and E39 models, these bushings are a direct fit into the existing suspension components. The installation process is straightforward, requiring no modifications and making it an ideal upgrade for DIY enthusiasts.
Versatile Performance: Whether for daily driving or performance-oriented applications, these bushings help optimize the rear suspension geometry, enhancing tire contact with the road and improving handling capabilities in various driving conditions.
This upgrade is ideal for BMW owners looking to enhance their vehicle's rear suspension performance. The Powerflex Rear Lower Arm Rear Bushing for the 14mm fitting is a reliable solution for improving handling, stability, and overall driving enjoyment, making it suitable for both everyday use and spirited driving scenarios.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.