BMW Suspension Parts

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

• Largest available piston diameter for greater sensitivity and precise control.
• Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
• 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
• Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
• Weather resistant coating to resist oxidization, and ensure long life.
• Lighter weight reduces wear and tear on suspension components.
• Wrenches to adjust front and rear ride height included!

This coilover kit fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335d 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i

ECS E90 xDrive Lowering Spring Set Transform your E90’s handling and stance with our specially designed ECS Lowering Springs. Built to enhance both cornering capability and ride comfort, these springs provide a balanced drop between 1.0"-1.3", giving your vehicle a sportier profile while keeping a smooth, OEM-like ride. Experience a lower center of gravity for improved stability, enhanced steering feedback, and a sleek look that reduces unsightly wheel gap for a true performance appearance.

Why Choose ECS Lowering Springs?

Better Handling and Stability: By lowering the center of gravity, these springs reduce body roll and improve road grip, delivering precise control through corners. Performance-Driven Design: Linear spring rates tuned for sporty responsiveness without sacrificing comfort, making them ideal for daily driving. Durability You Can Trust: Finished with a flat black powder coating for excellent corrosion resistance, so they look great and last. Specifications

Lowering Range: Front 1.0"-1.2", Rear 1.2"-1.3" Spring Rate: Front 505 lbs/in, Rear 854 lbs/in Ideal for Daily Drivers and Enthusiasts: With rates slightly above factory specs, ECS Lowering Springs provide improved handling without the harshness typical of coilovers, making them perfect for drivers seeking a more refined, performance-focused setup. Take it a step further by adding wheel spacers to achieve the ultimate stance—browse our wide selection of options for the E90 xDrive to complete your suspension overhaul!

ECS Performance Rear Trailing Arm Set Say goodbye to suspension flex and unwanted geometry changes under load with our Performance Rear Trailing Arms, an upgrade engineered to enhance strength and handling precision. Factory steel trailing arms can flex and even fail under harsh conditions, but these trailing arms are built to stand the test of time. Lightweight, rigid, and built from solid 6061-T6 aluminum, these trailing arms offer improved stability and peace of mind, no matter how demanding the road.

Why Upgrade to ECS Rear Trailing Arms?

Engineered for Strength: Constructed from high-grade 6061-T6 aluminum, anodized for corrosion resistance, these arms are designed to last longer and handle tougher conditions than OEM steel arms. Lightweight and Strong: Each arm is 25% lighter than stock, weighing 384 grams versus the factory 517 grams, reducing unsprung weight for better performance. Easy DIY Installation: Designed to fit seamlessly, these trailing arms won’t alter alignment settings, making them a straightforward upgrade for enthusiasts and home mechanics alike. Enhanced Handling: With virtually no flex, they eliminate unwanted suspension changes, providing a smoother, more controlled ride. Kit Includes

Lowering Spring Set: Front and rear springs with precise lowering specs and premium powder coating. Rear Trailing Arms: A set of solid 6061-T6 aluminum trailing arms, ready for direct replacement, along with all necessary hardware. Bolt Torque Spec: 74 ft-lbs

F30/F32 RWD Lowering Springs:

Take your driving performance to the next level with ECS Tuning’s exclusive lowering springs for F30/F32 RWD models. These springs are engineered to optimize your car’s handling and visual appeal by lowering the ride height and delivering an aggressive, race-inspired stance. With an average drop of up to 1.8", you’ll experience sharper cornering, reduced body roll, and enhanced steering precision—all without sacrificing daily comfort.

Key Features:

Front Lowering: 1.6" - 1.8" Rear Lowering: 1.4" - 1.6" Lower Center of Gravity: Improves cornering stability and reduces body roll EDC Compatibility: Works seamlessly with electronic damping systems Linear Spring Design: A perfect balance of ride comfort and performance Durable Finish: Black powder coating with signature Turner red accents Proudly Made in the USA Unlike harsh coilover systems, our lowering springs provide a firmer yet comfortable ride, retaining street-friendly drivability while enhancing performance. Designed to bridge the gap between factory suspension and extreme coilovers, ECS springs are your ideal choice for performance tuning without compromise.

Flush Fitment Kit – Complete Your Look:

Achieve the perfect stance with our included flush kit. Push your wheels out for that aggressive, wide-body look while enhancing your handling with improved grip in corners. This kit includes 5mm front spacers and 15mm rear spacers with extended black wheel bolts, ensuring seamless integration with your OE-style wheels.

Elevate both your performance and aesthetics with ECS Tuning’s lowering springs and flush kit combo for your F30/F32. Don’t miss out on this special offer!