TC Kline Racing, a leader in BMW performance parts, delivers unparalleled street and track performance with their Double-Adjustable Coilover Suspension Kit for the E36 3er. This kit combines cutting-edge technology and premium materials to elevate your driving experience to new heights.

Key Features:

Smart Shock technology for optimal performance VVS alloy springs (300# front, 400# rear) Koni double-adjustable cartridges for seamless street to race transitions Camber/caster plates for supreme adjustability Ride height adjustability for personalized setup BUNA rubber RSMs for reduced flex This comprehensive kit includes:

8711-1007LSPTC - TCK/Koni Coilover Driver’s Side Strut 8711-1007RSPTC – TCK/Koni Coilover Passenger’s Side Strut TCKFSXXXS – TCK VVS Alloy Short Front Springs (300#F/400#R) 8242-1007L/RSPTC – TCK/Koni Double Adjustable Rear Shocks TCKRSXXX – TCK VVS Alloy Rear Springs (customized rates) TCKRUM12R – Pair of Reinforced BUNA Rubber Shock Mounts (12mm sleeve) TCKRSA – Pair of TCK Rear Spring Adjusters Camber Plates - 1 pair Experience the ultimate blend of performance and value with TC Kline Racing's Double-Adjustable Coilover Suspension Kit.

Turner Motorsport introduces the TC Kline Coilover Kit, offering a lifetime warranty for street-driven cars, ensuring enduring performance and reliability. Featuring proprietary double-adjustable Koni dampers, camber plates, and spring rates of 400F / 180R, this kit delivers unmatched handling and comfort for BMW owners.

TC Kline Racing Coilovers are extensively designed and tested on both street and track, found in numerous competition vehicles and daily-driven cars. Engineered to optimize comfort and performance, every component of this system reflects a deep understanding of enthusiast needs.

Precisely-valved, compression, and rebound-adjustable Koni shocks are customized to TC Kline's specifications, combining Koni's manufacturing expertise with TC's extensive racing and tuning background. Stainless steel front strut housings ensure durability, ideal for road-salt conditions.

Front camber plates, crafted from anodized aircraft-grade aluminum with stainless steel bearing housing, allow for 2-degree adjustment. Rear mounts facilitate rebound adjustment without shock removal, enhancing usability.

This coilover system adapts to evolving driving habits, tire selections, and road conditions, offering adjustable camber, rebound, and replaceable springs for customization. TC Kline's racing experience emphasizes essential truths about suspension configurations, balancing comfort and competitive performance while debunking misconceptions about stiff suspensions.

Assembled in the USA, TC Kline's coilovers, camber plates, and suspension bushings showcase high-quality components meticulously developed through a close partnership between Turner Motorsport and TC Kline.

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

Enhance the handling and durability of your MINI with the M7 Speed MAXX-G High Performance Billet Aluminum Adjustable Rear Sway Bar Link Kit. This set of 2 direct replacement parts is compatible with all Gen 3 MINI Coopers and BMW X1 & X2 models. Crafted from CNC machined billet aircraft-grade aluminum, these sway bar links feature durable 90A durometer urethane bushings and forged steel adjustable tie rod ends. The design ensures over 10 times the strength and rigidity of the stock plastic parts, resulting in reduced compliance in the suspension system, improved sway bar response, and increased wheel rate for enhanced grip and control. With sealed and permanently lubricated tie rod ends and corrosion-resistant finishes, this kit guarantees longevity and performance. Upgrade your MINI's handling with the MAXX-G link kit, backed by a lifetime guarantee.

• Direct replacement for stock sway bar links
• Over 10 times stronger and more rigid than stock plastic parts
• Improved sway bar response and increased wheel rate
• Sealed and permanently lubricated tie rod ends for longevity
• Corrosion-resistant finishes for durability
• Lifetime guarantee for all parts

The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

Product Features:

• CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
• 2 Position, CNC Machined, TIG Welded Bar Ends
• Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
• 2 Stage Tangerine Orange, Powder-coated Finish
• Direct Fit Installation, Requires No Modifications

Fits the following BMWs:
2008-2013 E90/2 BMW M3