Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

JT Design - Corporate Logo
T#:3666
Part#: JTD909
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Made in the USA These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
Emmanuele Design - Corporate Logo
T#:555227
Part#: EMD-F80-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension. Lowering of 1.3" front and .3" rear.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:568357
Part#: EMD-F82-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension.
Show More Show Less

Alta Performance - Corporate Logo
T#:754312
Part#: AMPSUS100
In Stock at Vendor
$ 339.99 USD
Free Shipping
$ 339.99 USD
Free Shipping

ALTA Rear Control Arms are the ultimate upgrade for your MINI, replacing your rear lateral links with a solid and performance-focused design. These control arms enhance traction and handling while giving you precise control over camber and toe settings. The flexibility of ALTA control arms allows for fine-tuning without the hassle of removing and reinstalling the linkage. Simply adjust the lock nuts and twist the center section to achieve your desired settings.

These control arms are the perfect complement to other suspension products like springs, coilovers, or sway bars.

Key Features of ALTA Rear Control Arms:

  • CNC machined from 6061 aluminum rod for durability.
  • Heavy texture powder coating for corrosion resistance and added style.
  • Teflon-lined spherical rod ends for a solid connection and improved articulation.
  • Aircraft-quality spherical bearings for smooth and precise movement.
  • Injected Nylon around the ball center for quiet operation as the part ages.

For a comprehensive rear end upgrade, consider purchasing two sets of control arms to replace both upper and lower control arms. This minimizes deflection from the OEM rubber bushings and reduces weight. Please note that on models with Xenon-style headlamps, some modifications to the leveling sensor mounting may be necessary. For additional details, consult your ALTA dealer or our Tech Department.

ALTA Rear Control Arms come with high-quality hardware, including corrosion-resistant spacers and Grade 8 adjustment nuts.

Show More Show Less