Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Corteco - Corporate Logo
T#:392853
Part#: 31331139452
In Stock
$ 43.99 USD
Free Shipping on orders $49 and up
A common source of noise in the front suspension
TRW - Corporate Logo
T#:304215
Part#: 31102283578
In Stock
$ 145.99

This product was last offered at the strikethrough price on
04-28-2026

$ 105.99 USD
Free Shipping
$ 105.99 USD
Free Shipping

Improve your BMW's driving experience by addressing the wear and tear caused by years on the road. The suspension takes a beating from pot holes, speed bumps, and road hazards, leading to a weakened and sloppy feel. Enhance safety and ride comfort by replacing worn components, such as the control arm.

  • Improved driving experience and ride comfort
  • Enhanced safety through the replacement of worn suspension components
  • Non-serviceable ball joints and other components addressed for prolonged lifespan
  • Control arm replacement for a better feel and handling
  • Recommended replacement in pairs for optimal performance
  • Suitable for both front and rear suspension upgrades
  • Referred to as a wishbone by BMW
  • Performance upgrade for non-M3 models, recommended to replace in pairs due to heavy-duty nature
Show More Show Less
TRW - Corporate Logo
T#:304217
Part#: 31102283577
In Stock
42% off MSRP $ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping
42% off MSRP
$ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping

Enhance your driving experience with our premium suspension upgrade for your BMW. Over time, the road can take a toll on your suspension, leading to a sloppy and weak feel while driving. Our solution? Replace the control arm – a critical component that, after years of service, may wear out. Boost safety and ride comfort with this easy upgrade.

  • Improved driving experience
  • Enhanced safety
  • Better ride comfort
  • Extended service life of replacement parts

If you're considering replacing any part of your front or rear suspension, opt for doing it in pairs (both left and right sides). This ensures optimal performance and longevity of the replacement parts. In the BMW world, it's often referred to as a wishbone.

For non-M3 models, this isn't just a replacement – it's a performance upgrade. These heavy-duty components are recommended to be replaced in pairs to maximize their efficiency and provide a seamless driving experience.

Show More Show Less

TRW - Corporate Logo
T#:304216
Part#: 31102283575
Ships in 6 Business Days
$ 106.74

This product was last offered at the strikethrough price on
10-23-2026

$ 106.71 USD
Free Shipping
$ 106.71 USD
Free Shipping
This left/driver's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less

Meyle Rear Bump Stop - BMW F22/23 F3X
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36066263
Part#: 3147400017
In Stock
$ 36.99

This product was last offered at the strikethrough price on
05-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up
The rear bump stop protects the suspension by preventing bottoming out, improving ride comfort and maintaining stability.
Meyle Upper Strut Mount - E36, Z3, Z4
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:375473
Part#: 31336779613
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
$ 31.99 USD
Free Shipping on orders $49 and up
Should be replaced each time shocks are replaced due to this being a wearing item

Fall Line - Corporate Logo
T#:27938407
Part#: FLM-G8X-1FECOTOE
Back Ordered
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard by Turner Motorsport is crafted to enhance the alignment process for BMW enthusiasts. Made in the USA, this standard toe link kit facilitates rapid toe adjustments during alignment, and when combined with the tension strut, it also allows for precise track adjustments. Designed for easy fitment, these arms simplify wheel alignment and camber adjustment, making the setup process quicker and more efficient.

  • Enhanced Alignment: Enables fast and precise toe adjustments for improved wheel fitment.
  • Track Adjustment: Works in conjunction with the tension strut for overall track adjustments.
  • Simplified Setup: Eases camber adjustment and simplifies alignment processes.
  • Direct Replacement: Matches OEM part number 33322284534 // 33-32-2-284-534.
  • Multi-Link Suspension Compatibility: Handles dynamic changes in alignment settings effectively.

Fits:

  • G80 / G81 / G82 / G83 M3 & M4
  • F80 / F82 M3 & M4
  • G87 M2
  • F87 M2
Show More Show Less
TRW M3/1M Front Control Arm Upgrade Kit - with Level Sensor Rod - BMW...
Will add about .75 degrees of negative camber to the front for improved handling and tire wear
TRW - Corporate Logo
T#:557629
Part#: 31102283577MKT1
Ships in 6 Business Days
$ 447.27

This product was last offered at the strikethrough price on
10-22-2026

$ 442.96 USD
Free Shipping
$ 442.96 USD
Free Shipping
The M3 control arm upgrade is for people who want a very serious change in the ride/handling of the car. These are the factory OEM E9X M3 upper control arms, so the ride will not be much different than a standard M3. But it is a very large jump compared to the stock E9X arms and bushings, since they are not fluid-filled and have a harder rubber compound than the stock or Meyle HD bushings. These are direct replacements for the original arms, do not require any modification to install, and will add about .75 degrees of negative camber to the front for improved handling and tire wear
Show More Show Less

Front Differential Bushing - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362591
Part#: 33171090389
In Stock
$ 28.99

This product was last offered at the strikethrough price on
05-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up

TRW - Corporate Logo
T#:395054
Part#: 31126855741
Back Ordered
$ 124.99

This product was last offered at the strikethrough price on
05-11-2026

$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
Thrust arm with ball joint
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
Ships in 6 Business Days
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
TRW - Corporate Logo
T#:348929
Part#: 33322283546
Ships in 3 Business Days
$ 138.65

This product was last offered at the strikethrough price on
10-22-2026

$ 67.36 USD
Free Shipping on orders $49 and up
$ 67.36 USD
Free Shipping on orders $49 and up

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

 

33322283546



TRW - Corporate Logo
T#:341238
Part#: 33322283548
In Stock
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
Connects the spindle assembly to the rear subframe
TRW - Corporate Logo
T#:348928
Part#: 33322283545
Ships in 3 Business Days
$ 84.99

This product was last offered at the strikethrough price on
10-22-2026

$ 69.99 USD
Free Shipping on orders $49 and up
$ 69.99 USD
Free Shipping on orders $49 and up

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

 

33322283545

TRW - Corporate Logo
T#:348950
Part#: 33322283547
In Stock
$ 152.99

This product was last offered at the strikethrough price on
10-19-2026

$ 62.99 USD
Free Shipping
$ 62.99 USD
Free Shipping
Connects the spindle assembly to the rear subframe

TRW - Corporate Logo
T#:395053
Part#: 31126855742
In Stock
$ 124.99

This product was last offered at the strikethrough price on
05-21-2026

$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
Thrust arm with ball joint

Meyle Steel Front Control Arm - Left - E30
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:378630
Part#: 31121127725
In Stock
$ 93.99 USD
Free Shipping
$ 93.99 USD
Free Shipping
Includes ball joints
Fall Line - Corporate Logo
T#:5580987
Part#: FLM-F87-1BFLINK
Back Ordered
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit is essential for achieving optimal corner balance and handling in your BMW. This kit allows for precise adjustments to ensure the sway bar remains properly aligned and stress-free at static ride height. Adjustable sway bar end links are crucial for maximizing mechanical grip and stability during cornering, braking, and acceleration. By ensuring even loading and eliminating any “zero load” points, this kit enhances chassis dynamics and delivers superior performance.

  • Improved Handling: Ensures the sway bar is completely unloaded and unstressed at static ride height for enhanced chassis dynamics.
  • Enhanced Corner Balance: Helps achieve an even distribution of weight across each tire, improving stability and grip.
  • Precision Adjustment: Allows for fine-tuning of the sway bar links to maintain proper alignment and prevent uneven loading.
  • Durable Protection: Dust boots seal the end links to prevent dust and debris from affecting performance.
  • Essential for Performance: Critical for those seeking the best handling and cornering performance from their BMW M car.
Show More Show Less

TRW - Corporate Logo
T#:341241
Part#: 33322283547KT4
Ships in 3 Business Days
$ 596.99

This product was last offered at the strikethrough price on
10-08-2026

$ 424.99 USD
Free Shipping
$ 424.99 USD
Free Shipping
These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting). 
 
Show More Show Less
Meyle Rear Guide Link - E38 E39
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362102
Part#: 33326768791
In Stock
$ 67.99

This product was last offered at the strikethrough price on
10-20-2026

$ 54.99 USD
Limited Qty Sale
Free Shipping
$ 67.99

This product was last offered at the strikethrough price on
10-20-2026

$ 54.99 USD
Limited Qty Sale
Free Shipping
This is a new rear guide link with a new balljoint and rubber bushing.

Meyle Steel Front Control Arm - Right - E30
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:378631
Part#: 31121127726
In Stock
$ 93.99 USD
Free Shipping on orders $49 and up
$ 93.99 USD
Free Shipping on orders $49 and up
Includes ball joints

Fall Line - Corporate Logo
T#:27938406
Part#: FLM-G8X-1BUNI
In Stock
$ 395.00 USD
Free Shipping
$ 395.00 USD
Free Shipping
Upgrade your BMW's front suspension with our premium Fall Line Motorsports G8X M3/M4 Front Monoball Conversion. This kit offers an advanced spherical bearing conversion, enhancing the performance of the bushing found within OEM BMW Part number: 31-10-8-095-668. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the car is put through its paces Made in the USA! Key Features: Spherical bearing conversion kit designed for precision and performance. Enhanced control and steering response without compromising ride comfort. Directly compatible with OEM BMW Part number: 31108095668. Perfectly complements G8X M3 and M4 models. Crafted with premium materials for long-lasting durability. Ideal for enthusiasts seeking improved handling during aggressive driving and track use. Take your BMW's performance to the next level with the Fall Line Motorsports G8X M3/M4 Front Monoball Conversion. Elevate your driving experience today with this high-quality upgrade. Get yours now and experience the difference!
Show More Show Less
Corteco - Corporate Logo
T#:16607666
Part#: 33311090946
Ships in 1 Business Day
$ 22.99 USD
Free Shipping on orders $49 and up
The subframe provides mounting for your rear suspension. The subframe connects to the body with bushings to absorb vibration at all mounting locations. These bushings absorb any vibration that would normally be transmitted to the cabin and keep the subframe solid. They also provide a solid mounting location to keep everything tight. If there is excessive vibration in your cabin or a clunk or knock when going over bumps, the problems may be your subframe bushings. By replacing them with new units, everything will stay tighter and provide a more secure mounting location for your entire rear suspension. These Meyle pieces will go right into the stock location to quiet everything down. With the same hardness as stock bushings, no excessive vibration will be transmitted to the cabin.
Show More Show Less
Meyle Rear Subframe Bushing - E39
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579247
Part#: 3003331104
Ships on Nov 16, 2026
$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up
Used on all four corners of rear subframe.


TRW - Corporate Logo
T#:377447
Part#: 31102283577KT1
Ships in 6 Business Days
$ 428.99

This product was last offered at the strikethrough price on
10-21-2026

$ 424.99 USD
Free Shipping
$ 424.99 USD
Free Shipping
Over the years, the road takes a serious toll on your suspension. Potholes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience and improve safety and ride comfort, replace suspension components as they wear. After years of service, non-serviceable ball joints and other components begin to wear out. Because some components cannot be replaced, the only solution is the replacement of the entire arm. This OEM TRW kit includes all four front control arms for the E9X M3 / E82 1M. Replacing all four at once will provide the most service life out of replacement parts and ensure they are all performing properly. This kit is intended for installation on Halogen headlight-equipped models, as a headlight level sensor rod is not included.
Show More Show Less
Fall Line - Corporate Logo
T#:20979735
Part#: F8X/E9X-1FLCOCA
Back Ordered
$ 1,095.99 USD
Free Shipping
$ 1,095.99 USD
Free Shipping
*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs
Show More Show Less
Fall Line - Corporate Logo
T#:28038181
Part#: FLM-G8X-1BLCABO
Ships in 1 Business Day
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
Experience championship-caliber performance with Fall-Line's Lower Control Arm Bearings, proudly Made in the USA. From years of competitive racing, Fall-Line is synonymous with producing top-tier suspension components that excel on the track. The weak link in the latest M Cars' rear camber arms is the rubber bushings, but Fall-Line's new lower control arm bearings offer a game-changing solution. This SKU replaces OEM BMW Part number: 33326792553 Key Features: Designed for all G8X and F8X M cars DMG Mori 5-Axis CNC machined for precision Full stainless bearing assembly including hats, bearings, housing, and spiral locks Sold in pairs; designed to replace the rear control/camber arm outer bearings (BMW Part Number: 33-32-6-792-553) By eliminating rubber from this critical feedback area, Fall-Line provides control over the tire's behavior and confidence behind the wheel at the limit. These bearings feature the largest FK spherical bearings on the market, ensuring strength and longevity even under competition-level loads. Stainless steel spiral locks offer 360 degrees of clamping force, securing the bearing from any potential movement. As a bonus, these spherical bearings outlast OEM rubber variants, eliminating the headache of repeated replacements over your ownership. Please note that, as with any elimination of suspension bushings, there may be a slight increase in noise, vibration, and harshness after installation. Upgrade your suspension with Fall-Line's Lower Control Arm Bearings and take your driving experience to the next level. Invest in championship-level performance with Fall-Line, the trusted name in motorsport.
Show More Show Less

Meyle Front Control Arm Bracket - E30 E36 Z3
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:178014
Part#: 31121136532MY
Ships on Dec 10, 2026
$ 42.99 USD
Free Shipping on orders $49 and up
Restore precise steering feel and eliminate unwanted noise. This Meyle bracket includes pre-pressed bushings for a straightforward installation, directly replacing worn components.

KMAC - Corporate Logo
T#:389661
Part#: 193616-1J
Ships on Nov 19, 2026
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
Show More Show Less
Rear Subframe Bushing - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:599854
Part#: 33316758259
In Stock
$ 46.99

This product was last offered at the strikethrough price on
05-07-2026

$ 36.99 USD
Free Shipping on orders $49 and up
$ 36.99 USD
Free Shipping on orders $49 and up
The rear subframe bushings are vital to the performance and handling of your vehicle. Transfer of load and strain in the drivetrain and rear suspension rely on the subframe to do their job effectively. If the subframe bushings are worn, the transfer of power to the ground can be greatly compromised.
Show More Show Less

Meyle Front Left Control Arm Bushing with Bracket - E30 non-M, E36 Z3...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:178013
Part#: 31121136531MY
Ships on Dec 10, 2026
$ 42.99 USD
Free Shipping on orders $49 and up
Restore precise front-end feel and handling with this Meyle HD Front Left Control Arm Bushing and Bracket assembly. Engineered for durability, it includes the bracket and mounting hardware for a straightforward, performance-oriented replacement.
Show More Show Less
TRW - Corporate Logo
T#:395055
Part#: 31126855742KT
Back Ordered
$ 248.99

This product was last offered at the strikethrough price on
07-07-2026

$ 247.99 USD
Free Shipping
$ 247.99 USD
Free Shipping
The thrust arm keeps the lower wheel straight and contacting the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement.

Front Upper Strut Mount - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:10128436
Part#: 31306785962
In Stock
$ 87.99

This product was last offered at the strikethrough price on
05-07-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Replace your worn-out mounts whenever servicing your suspension to maintain comfort and performance.

Fall Line - Corporate Logo
T#:598880
Part#: FLM-F87-1BUNI
Ships in 2 Business Days
$ 423.00 USD
Free Shipping
$ 423.00 USD
Free Shipping
Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M2. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M2 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M2’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M2.
Show More Show Less
Rear Differential Mount - Front Position
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594515
Part#: 33316792873
Ships in 1 Business Day
$ 41.99

This product was last offered at the strikethrough price on
05-07-2026

$ 38.99 USD
Free Shipping on orders $49 and up
$ 38.99 USD
Free Shipping on orders $49 and up
Over time bushings deteriorate and become ineffective. Replace them to reduce noise and harshness. Priced Each. Two required for complete service.
Fall Line - Corporate Logo
T#:28038194
Part#: FLM-E9X-1BUNI
Ships in 3 Business Days
$ 423.00 USD
Free Shipping
$ 423.00 USD
Free Shipping
Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M3’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M3. *V2 improved design also incorporates hard coat clear anodized finish*
Show More Show Less


Fall Line - Corporate Logo
T#:28038192
Part#: FLM-F8X-G8X-1BRL
Ships in 2 Business Days
$ 198.00 USD
Free Shipping
$ 198.00 USD
Free Shipping
Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: Installed photos show V1 jam-nut style V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair
Show More Show Less
Corteco - Corporate Logo
T#:592542
Part#: 37211090631
Ships in 1 Business Day
$ 292.79

This product was last offered at the strikethrough price on
08-13-2026

$ 208.99 USD
Free Shipping on orders $49 and up
$ 208.99 USD
Free Shipping on orders $49 and up
Used to hold air pressure for the shock absorbers
Corteco - Corporate Logo
T#:393173
Part#: 33526773669
Ships in 1 day
$ 55.05 USD
Free Shipping on orders $49 and up
Common failure component producing an audible clunk over bumps

Upper Strut Mount / Bearing - 2002, 2002tii, E21 320i
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:359655
Part#: 31331110195
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up
This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber and it can shorten the life of your shocks.
Show More Show Less

Meyle Bump Stop & Boot Kit - BMW E70 X5, E71 X6
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:40342816
Part#: 3147400019
Ships on Nov 16, 2026
$ 41.99 USD
Free Shipping on orders $49 and up
Rear bump stops protect your suspension by preventing it from reaching full travel, helping to extend its lifespan. Instead of bottoming out, the suspension compresses against these stops for added protection. If you're replacing shocks and struts, it's a good idea to replace the bump stops as well.
Show More Show Less
KMAC - Corporate Logo
T#:388807
Part#: 195116-1J
Ships on Nov 19, 2026
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
3/2002-2006  R50 MINI  MINI Cooper
2005-2008  R52 MINI  MINI Cooper Convertible, MINI Cooper S Convertible.
3/2002-2006  R53 MINI  MINI Cooper S
Show More Show Less

Meyle Rear Lower Shock Mount - E82, E88, E90, E91, E92, E93
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:378339
Part#: 33526768544
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
Recommended replacement when replacing shocks
Meyle Rear Lower Control Arm - E36, E46, E83, Z4
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:369355
Part#: 33326770813
Ships on Nov 16, 2026
$ 44.99 USD
Free Shipping on orders $49 and up
Complete including bushing

Meyle Front Inner Ball Joint - E30
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:592190
Part#: 31121126253
Ships on Nov 16, 2026
$ 20.99 USD
Free Shipping on orders $49 and up
Front lower ball joint from control arm to lower sub frame

Complete Front Upper Control Arm Upgrade - Left & Right - E39 525i/52...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:2216
Part#: E396HDARMS
Ships on Nov 16, 2026
$ 339.99 USD
Free Shipping
$ 339.99 USD
Free Shipping

The front control arm bushings is the Achilles heel on the E39 models. The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering.

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel.

This is a package of Meyle HD control arms with the HD bushings already pressed in. This makes for an easy swap out-swap in install. These arms replace the existing stock upper control arms - otherwise known as a tension strut or strut support arm. It's the arm with the twist. The BMW part numbers for these arms are 31 12 1 141 717 and 31 12 1 141 718.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty.

Features:

  • 4 Year Warranty

  • All metal ball joints are more reliable and longer lasting than stock

  • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

This item fits the following BMWs:
1997-2003 E39 5 Series BMW 525i, 525iT, 528i, 528iT, 530i sedans and touring wagons
2000-2003 E52 Z8 Z8 - Z8 Alpina

Show More Show Less
Front Strut Mount - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594559
Part#: 31306779604
Ships on Nov 16, 2026
$ 28.99 USD
Free Shipping on orders $49 and up
A common source of front-end clunking, should be replaced each time suspension is replaced.
Meyle Front Strut Cartridge - E34
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:372215
Part#: 31321134565
Ships on Nov 16, 2026
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping
Fits Left Or Right Side With Standard Suspension