BMW Suspension Parts

Macht Schnell EDC Emulation Module

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:5351

Part#: TMS5351

Ships on Nov 17, 2026

$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:

The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required

Compatible with iDrive and non-iDrive systems

Easy 15-minute installation process with no wire cutting

Proper emulation of the EDC monitoring system

No dealer visits or coding required after installation

Completely removable at any time

Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
Will not work on vehicles equiped with BMW's Dynamic Drive system.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
2008+ E71 BMW X6 xDrive35i X6 xDrive50i

Show More Show Less

Bav Auto Trailing Arm Bushing and Ball Joint Tool - Master Set ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580410

Part#: B8800100

In Stock

Sale - Save 3% $ 222.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.30 USD

Add to Wish List

Qty

Sale - Save 3%

$ 222.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.30 USD

Add to Wish List

Remove and install the three bushings and ball joints that are pressed into the rear trailing arm. Use this one tool kit for on-vehicle or off-vehicle removal and replacement of the Rear Trailing Arm Bushing, Outer Upper Control Arm Bushing (ball joint) and Outer Lower Control Arm Bushing (ball joint). This tool is designed to work on E36 3-series (except E36 318ti), E46 3-series, E83 X3 and E85/E86 Z4 Coupe & Roadster.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Bav Auto Rear Subframe Bushing Press - E88 E9X BMW

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580432

Part#: B8800127

In Stock

Sale - Save 3% $ 419.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.39 USD

Add to Wish List

Qty

Sale - Save 3%

$ 419.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.39 USD

Add to Wish List

The Bav Auto Rear Subframe Bushing Press allows you to remove and install rear subframe bushings while the subframe is still in the vehicle, saving you several hours of labor.

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:4648679

Part#: 69.10.100

Ships on Nov 20, 2026

$ 289.00 USD

Add to Wish List

Qty

$ 289.00 USD

Add to Wish List

Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.

Show More Show Less

Bav Auto Rear Subframe Bushing Press Tool

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580407

Part#: B8800097

Special Order: No Guaranteed ETA

Sale - Save 3% $ 383.99

This product was last offered at the strikethrough price on
05-03-2026

$ 372.47 USD

Add to Wish List

Qty

Sale - Save 3%

$ 383.99

This product was last offered at the strikethrough price on
05-03-2026

$ 372.47 USD

Add to Wish List

Allows you to both remove and install rear subframe to body bushings without removing your subframe, saving you hours of labor from having to disassemble suspension components.

Macht Schnell Aluminum Differential Bushing Kit - E9X M3

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:4648688

Part#: 69.10.110

Ships in 9 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.

MINI Adjustable Rear Tie Bars

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:26404915

Part#: FMRCAM

In Stock

Sale - Save 10% $ 560.99

This product was last offered at the strikethrough price on
10-26-2026

$ 504.36 USD

Add to Wish List

Qty

Sale - Save 10%

$ 560.99

This product was last offered at the strikethrough price on
10-26-2026

$ 504.36 USD

Add to Wish List

Forge introduces its Forge Adjustable Rear Tie Bars for various MINI models, developed and tested in the demanding Mini Challenge Race Series environment. Designed for road-going MINIs, including R50-R53, R55-R59, and R60/R61 models, these tie bars offer superior performance and durability.

Tested in the Mini Challenge Race Series for proven reliability
Enhances tire surface contact area for improved traction
Reduces uneven tire wear for extended tire life
Adjustable geometry allows for fine-tuning and faster lap times
Eliminates tramlining feel and improves steering response
Manufactured from high-quality high tensile steel for strength and durability
Corrosion-resistant powder coating ensures longevity in all conditions
Supplied with custom-made dirt ingress covers for added protection
Fitted with Powerflex polyurethane bushes for high performance and long life
Covered by Forge's industry-leading Lifetime warranty

Upgrade your Mini's performance with Forge Adjustable Rear Tie Bars, manufactured in the UK for optimal quality and reliability.

Show More Show Less

Strut Spring Compressor

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:363968

Part#: 013892SCH01A

In Stock

Sale - Save 21% $ 60.99

This product was last offered at the strikethrough price on
05-02-2026

$ 47.99 USD

Add to Wish List

Qty

Sale - Save 21%

$ 60.99

This product was last offered at the strikethrough price on
05-02-2026

$ 47.99 USD

Add to Wish List

This spring compressor is built with ease of use and safety in mind.

MacPherson Strut Coil Spring Compressor Set

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:383404

Part#: 013845SCH01A

In Stock

Sale - Save 15% $ 211.99

This product was last offered at the strikethrough price on
05-02-2026

$ 179.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 211.99

This product was last offered at the strikethrough price on
05-02-2026

$ 179.99 USD

Add to Wish List

Professional Spring Compressor Kit will compress most styles of strut springs. This is a safe and efficient way to compress strut springs. This set is supplied with everything you need to get the job done like a pro. Each jaw has safety lips to eliminate slip and is designed to fit the pitch of the spring to ensure maximum surface contact between the jaws and the spring, thus eliminating the risk of the compressor slipping around the spring. The spindle is driven by a 21mm hex nut and is not designed to be used with a impact gun. Hand turn the nut with a wrench or hand ratchet.

Show More Show Less

Schwaben Ball Joint Removal Tool 20-80mm

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:379416

Part#: 008958SCH01A

In Stock

Sale - Save 23% $ 96.99

This product was last offered at the strikethrough price on
05-02-2026

$ 74.24 USD

Add to Wish List

Qty

Sale - Save 23%

$ 96.99

This product was last offered at the strikethrough price on
05-02-2026

$ 74.24 USD

Add to Wish List

This ball joint separator has a wider jaw opening for vehicles needing a larger jaw opening. Popular on cars with thicker a-frames.

Schwaben Strut Nut Socket - 22mm

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:362742

Part#: 003046SCH01A-04

In Stock

Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Show More Show Less

Schwaben Strut Nut Socket - 21mm

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:362741

Part#: 003046SCH01A-03

Ships on Dec 18, 2026

Sale - Save 20% $ 34.99

This product was last offered at the strikethrough price on
09-29-2026

$ 27.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 34.99

This product was last offered at the strikethrough price on
09-29-2026

$ 27.99 USD

Add to Wish List

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Show More Show Less

Bav Auto Trailing Arm Bushing Tool Set - E82/88 E84 E9X

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:587611

Part#: B8800101

In Stock

Sale - Save 8% $ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.39 USD

Add to Wish List

Qty

Sale - Save 8%

$ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.39 USD

Add to Wish List

Remove and install the rear trailing arm bushings and upper and lower rear control arm bushings with one toolset without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90, E91, E92, E93 model cars.

Show More Show Less

Bav Auto Trailing Arm Bushing Tool

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580370

Part#: B8800047

Ships on Feb 22, 2027

Sale - Save 10% $ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.69 USD

Add to Wish List

Remove and install rear trailing arm bushings without removing the trailing arms from the vehicle.

Schwaben 21mm and 22mm Double Sided Strut Wrench

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:396481

Part#: 017822SCH01A

In Stock

Sale - Save 25% $ 35.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 35.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.99 USD

Add to Wish List

Both of the most popular strut nut sizes on one wrench make this wrench perfect for suspension work. Also, thanks to its stepped design, it can easily get in to tight spots. Each end has a closed design measuring at 21mm or 22mm.

Show More Show Less

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Schwaben BMW Control Arm Bushing Tool Kit - E30 E36 E46 Z3 Z4 ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:557331

Part#: 025770SCH01A

In Stock

Sale - Save 10% $ 210.99

This product was last offered at the strikethrough price on
05-03-2026

$ 189.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 210.99

This product was last offered at the strikethrough price on
05-03-2026

$ 189.89 USD

Add to Wish List

The Schwaben control arm bushing tool kit allows you to easily remove and replace your front control arm bushings without removing the control arm from your vehicle.

Bav Auto Control Arm Bushing Press Tool - E30 E36 E46 Z3 Z4

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580360

Part#: B8800033

In Stock

Sale - Save 8% $ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 171.89 USD

Add to Wish List

Qty

Sale - Save 8%

$ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 171.89 USD

Add to Wish List

Removes and installs control arm bushings while leaving the control arm on the car.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580366

Part#: B8800042

Ships on Mar 30, 2027

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

BMW Bav Auto Rear Ball Joint Press

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580356

Part#: B8800028

In Stock

Sale - Save 3% $ 130.99

This product was last offered at the strikethrough price on
06-10-2026

$ 127.06 USD

Add to Wish List

Qty

Sale - Save 3%

$ 130.99

This product was last offered at the strikethrough price on
06-10-2026

$ 127.06 USD

Add to Wish List

Allows for removal / replacement of lower rear ball joint, enabling you to get this job done at home, saving you time and money on labor.

Ball Joint Removal Tool 12-56mm

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:379389

Part#: 008959SCH01A

In Stock

Sale - Save 12% $ 59.99

This product was last offered at the strikethrough price on
05-02-2026

$ 52.69 USD

Add to Wish List

Qty

Sale - Save 12%

$ 59.99

This product was last offered at the strikethrough price on
05-02-2026

$ 52.69 USD

Add to Wish List

This tool is built to get the job done quickly and easily. This can used on most steering and suspension ball joints.

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

Schwaben 5pc Metric Flare Nut Wrench Set

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:380810

Part#: 010798SCH01A

In Stock

Sale - Save 15% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD

Add to Wish List

This set is a must have for changing brake, fuel, oil lines of all kinds. Complete size coverage

Schwaben Inner Tie Rod Removal/Installer Tool

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:378871

Part#: 001293SCH01A

In Stock

Sale - Save 25% $ 61.99

This product was last offered at the strikethrough price on
05-02-2026

$ 46.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 61.99

This product was last offered at the strikethrough price on
05-02-2026

$ 46.49 USD

Add to Wish List

This special tool for inner tie rods allows removing inner tie rod without disassembling the rack and pinion.

Bav Auto Upper Spring Compressor Jaw - E39/E46

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580380

Part#: B8800062

In Stock

Sale - Save 12% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 64.22 USD

Add to Wish List

Qty

Sale - Save 12%

$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 64.22 USD

Add to Wish List

This upper spring compressor jaw is specifically for E39 and E46 springs, for use with Bav Auto spring compressors.

Schwaben Wheel Mount Kit & Magnetic Caster/Camber Gauge

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:385959

Part#: 010891SCH01AKT

In Stock

Sale - Save 3% $ 403.99

This product was last offered at the strikethrough price on
05-03-2026

$ 392.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 403.99

This product was last offered at the strikethrough price on
05-03-2026

$ 392.33 USD

Add to Wish List

Perform your own caster and camber adjustments with this professional kit

Bav Auto 9-Way Slide Hammer Puller Set

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580405

Part#: B8800095

In Stock

Sale - Save 5% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD

Add to Wish List

Qty

Sale - Save 5%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD

Add to Wish List

A complete slide hammer kit for your next suspension job.

Strut and Shock Installation/Removal Set

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:583366

Part#: 026901SCH01A

Back Ordered

Sale - Save 10% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.49 USD

Add to Wish List

Qty

Sale - Save 10%

$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.49 USD

Add to Wish List

When dismantling a suspension strut sometimes the securing nut can be difficult to access and the central strut itself needs to be held still while the nut is undone. This new Shock Absorber Tool Kit is designed to overcome these problems and make the job quick and easy.

The go-through design of the sockets and ratchet design allows the strut lock extensions to go right through the middle of the ratchet and socket. Five different strut lock extensions are included, to fit a variety of applications. Seven go-through deep sockets (16, 17, 18, 19, 21, 22 and 24mm) are included, plus a sliding T-bar.

Once the spring is compressed and the top plate is free, simply choose the correct strut lock extension and socket. Then fit the socket and the ratchet handle, and fit the strut lock straight through. The central strut is held steady, and the securing nut is quickly removed.

Specifically designed for repairing and replacing shock absorbers and struts
Contents: 7 - Go Thru' deep sockets: 16/17/18/19/21/22/24mm
3 x 1/2"D Hex bits: 6mm/7mm/8mm,
1 x sliding T-bar 1/2"D,
2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D
Also includes 1 x 21mm Hex Go Thru' ratchet
Packed in a blow mold case for easy storage
For California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Bav Auto Rear Ball Joint Tool

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580371

Part#: B8800049

In Stock

Sale - Save 5% $ 81.99

This product was last offered at the strikethrough price on
06-10-2026

$ 77.89 USD

Add to Wish List

Qty

Sale - Save 5%

$ 81.99

This product was last offered at the strikethrough price on
06-10-2026

$ 77.89 USD

Add to Wish List

This ball joint press is designed make removal of your old ball joints as painless as possible. Adapts the size of the balljoint and forces it out when using a ratchet.

Control Arm Bushing Remover & Installer - Bavarian Autosport ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Designed for use with 65mm bushings

T#:580391

Part#: B8800078

In Stock

Sale - Save 10% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Don't struggle with hammers and improper techniques, drive your bushings out easily with this control arm bushing remover and installer.

Bav Auto 23mm Tie Rod Puller

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580451

Part#: B8800146

In Stock

Sale - Save 40% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.40 USD

Add to Wish List

Qty

Sale - Save 40%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.40 USD

Add to Wish List

Will not tear tie rod boots, which can lead to premature failure of the tie rod assembly.

Toe Alignment Gauge

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:386443

Part#: 99374

Ships in 7 Business Days

Sale - Save 3% $ 128.99

This product was last offered at the strikethrough price on
05-02-2026

$ 125.12 USD

Add to Wish List

Qty

Sale - Save 3%

$ 128.99

This product was last offered at the strikethrough price on
05-02-2026

$ 125.12 USD

Add to Wish List

Correct toe settings contribute to both stable steering and even tire wear. The SPC Performance wheel toe bar tool is designed to prevent vehicle drifting and ensure uniform tire wear. It includes a steel bar equipped with sliding adjusters and pointers to accurately assess the vehicle's toe alignment.

For wider wheel bases use T#386442!

Show More Show Less

5 Piece Strut Nut Socket Kit

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:377177

Part#: 003046SCHKT

Ships on Dec 18, 2026

Sale - Save 23% $ 153.99

This product was last offered at the strikethrough price on
05-02-2026

$ 119.21 USD

Add to Wish List

Qty

Sale - Save 23%

$ 153.99

This product was last offered at the strikethrough price on
05-02-2026

$ 119.21 USD

Add to Wish List

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Kit Features:

18mm
19mm
21mm
22mm
24mm

Show More Show Less

Schwaben - BMW Suspension Install Tool Kit

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:366822

Part#: S45CKT

Ships on Dec 18, 2026

Sale - Save 22% $ 235.99

This product was last offered at the strikethrough price on
05-02-2026

$ 182.95 USD

Add to Wish List

Qty

Sale - Save 22%

$ 235.99

This product was last offered at the strikethrough price on
05-02-2026

$ 182.95 USD

Add to Wish List

If you're refreshing your struts and springs this tool is a must, properly compress the springs, easily remove and install the strut nut, and smoothly remove the spindles.

Features:

Spring Compressor
Strut Nut Sockets
Spindle Spreader

Show More Show Less

Bav Auto Tie-rod and Upper/Lower Control Arm Ball Joint Puller - E39 ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580406

Part#: B8800096

Special Order: No Guaranteed ETA

Sale - Save 10% $ 69.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 69.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.99 USD

Add to Wish List

This puller is perfect for removing all tie-rod ends and ball joints on the front suspension of all E39 5 Series cars 1997-2003.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Schwaben Shock Nut Socket - 17mm

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:587303

Part#: 03046SCH01A-07

In Stock

Sale - Save 25% $ 23.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 23.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Add to Wish List

Pitman Arm / Tie Rod Puller

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:25075816

Part#: 3584SCH01A

In Stock

Sale - Save 25% $ 24.99

This product was last offered at the strikethrough price on
05-03-2026

$ 18.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 24.99

This product was last offered at the strikethrough price on
05-03-2026

$ 18.74 USD

Add to Wish List

The Schwaben Pitman arm and tie rod puller offers a blend of slim construction and sturdy resilience, making it exceptionally suited for accessing tight spaces while also possessing the strength to manage high torque pulls across a diverse array of cars and light trucks. Fashioned with a heat-treated pulling screw, it is fortified with a protective black finish to resist rust and corrosion, guaranteeing enduring durability. Its sleek profile facilitates easy navigation through confined areas, complemented by meticulously crafted machined threads that ensure seamless operation. Compatible with a 3/8-inch drive, this tool proves to be a versatile asset for a multitude of automotive tasks.

Features:

3/8-inch Drive
Smooth machined threading
Slim design to fit into tight spaces

Show More Show Less

Schwaben Strut Nut Socket - 24mm

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:362743

Part#: 003046SCH01A-05

In Stock

Sale - Save 41% $ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 19.99 USD

Add to Wish List

Qty

Sale - Save 41%

$ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 19.99 USD

Add to Wish List

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Show More Show Less

Schwaben Shock Nut Socket - 16mm

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:587304

Part#: 03046SCH01A-06

In Stock

Sale - Save 25% $ 23.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 23.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Add to Wish List

Schwaben Shock Nut Socket - 16mm

The Schwaben Shock Nut Socket - 16mm is an essential tool for securely mounting shocks to their mounts. Designed to help achieve the correct torque specification, this socket allows the use of an internal hex wrench to hold the damper shaft in place while using a torque wrench to apply the correct torque. Properly torquing the retaining nut is crucial to prevent premature mount failure or loosening. This high-quality socket ensures a precise fit and reliable performance for maintaining your vehicle's suspension system.

Benefits:

Allows accurate torquing of shock retaining nuts to prevent mount failure
Designed for use with an internal hex wrench to secure the damper shaft
Ensures proper torque application with your torque wrench
Helps avoid premature mount failure and nut loosening
High-quality construction for durable and reliable performance
Compatible with 16mm shock nuts

Show More Show Less

16mm / 18mm Thin Wrench - For Use On Swaybar End Links - Bavarian Aut...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580331

Part#: B8300001

In Stock

Sale - Save 3% $ 9.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.65 USD

Add to Wish List

Qty

Sale - Save 3%

$ 9.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.65 USD

Add to Wish List

Schwaben Strut Nut Socket - 19mm

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:362740

Part#: 003046SCH01A-02

In Stock

Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
05-02-2026

$ 19.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 25.99

This product was last offered at the strikethrough price on
05-02-2026

$ 19.49 USD

Add to Wish List

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Show More Show Less

Bav Auto Spindle Housing Spreader Tool - 1/2" Drive

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580424

Part#: B8800117

In Stock

Sale - Save 25% $ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD

Add to Wish List

Used to separate steering knuckle from your shock/strut easily, no need to use a chisel and hammer now!

Schwaben Strut Nut Socket - 18mm

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:362739

Part#: 003046SCH01A-01

In Stock

Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
05-02-2026

$ 19.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 25.99

This product was last offered at the strikethrough price on
05-02-2026

$ 19.49 USD

Add to Wish List

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Show More Show Less

Schwaben Spindle Housing Spreader Tool

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:360478

Part#: SCW3435

In Stock

Sale - Save 30% $ 21.99

This product was last offered at the strikethrough price on
09-08-2026

$ 15.39 USD

Add to Wish List

Qty

Sale - Save 30%

$ 21.99

This product was last offered at the strikethrough price on
09-08-2026

$ 15.39 USD

Add to Wish List

Many German suspensions hold the strut in a split housing that is clamped tightly around the strut tube with a pinch bolt. Efforts to spread the housing after removing the bolt using chisels or pry bars may result in component damage or personal injury. The Schwaben Spindle Housing Spreader tool safely expands the split knuckle tube wide enough to allow removal of the old strut insert, and installation of the new one. Insert the hardened tip of the spreader into the gap in the housing, and turn it 90 degrees using a ½-inch breaker bar or ratchet. This spreads the tube slightly, and allows the strut to be safely removed.

Show More Show Less

Bav Auto Power Hose Quick Disconnect Fitting Tool

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:580350

Part#: B8800021

Special Order: No Guaranteed ETA

Sale - Save 25% $ 14.99

This product was last offered at the strikethrough price on
05-03-2026

$ 11.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 14.99

This product was last offered at the strikethrough price on
05-03-2026

$ 11.24 USD

Add to Wish List

Used to release quick disconnect fittings on BMW power steering hoses / lines.

Project Cars

SELECT YOUR BMW

Sub-Categories

Schwaben Shock Nut Socket - 16mm

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results